dm: Add a dsi host uclass
authorYannick Fertré <yannick.fertre@st.com>
Mon, 7 Oct 2019 13:29:05 +0000 (15:29 +0200)
committerAnatolij Gustschin <agust@denx.de>
Sun, 13 Oct 2019 21:34:43 +0000 (23:34 +0200)
Display Serial Interface (DSI) host can usefully be modelled
as their own uclass.
DSI defines a serial bus and a communication protocol
between the host and the device (panel, bridge).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
arch/sandbox/dts/sandbox.dts
arch/sandbox/dts/test.dts
configs/sandbox_defconfig
drivers/video/Kconfig
drivers/video/Makefile
drivers/video/dsi-host-uclass.c [new file with mode: 0644]
drivers/video/sandbox_dsi_host.c [new file with mode: 0644]
include/dm/uclass-id.h
include/dsi_host.h [new file with mode: 0644]
test/dm/Makefile
test/dm/dsi_host.c [new file with mode: 0644]

index 16a33db..f1637c8 100644 (file)
                compatible = "google,cros-ec-sandbox";
        };
 
+       dsi_host: dsi_host {
+               compatible = "sandbox,dsi-host";
+               status = "okay";
+       };
+
        ethrawbus {
                compatible = "sandbox,eth-raw-bus";
                skip-localhost = <0>;
@@ -63,7 +68,6 @@
                compatible = "sandbox,spi";
                cs-gpios = <0>, <&gpio_a 0>;
        };
-
 };
 
 #include "sandbox.dtsi"
index 25cac05..5d9ab37 100644 (file)
                };
        };
 
+       dsi_host: dsi_host {
+               compatible = "sandbox,dsi-host";
+       };
+
        a-test {
                reg = <0 1>;
                compatible = "denx,u-boot-fdt-test";
index f77b9e8..3f2dc99 100644 (file)
@@ -206,6 +206,7 @@ CONFIG_CONSOLE_ROTATION=y
 CONFIG_CONSOLE_TRUETYPE=y
 CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y
 CONFIG_VIDEO_SANDBOX_SDL=y
+CONFIG_VIDEO_DSI_HOST_SANDBOX=y
 CONFIG_OSD=y
 CONFIG_SANDBOX_OSD=y
 CONFIG_W1=y
index 36f666e..cdaf616 100644 (file)
@@ -686,6 +686,17 @@ config VIDEO_DW_HDMI
          rather requires a SoC-specific glue driver to call it), it
          can not be enabled from the configuration menu.
 
+config VIDEO_DSI_HOST_SANDBOX
+       bool "Enable sandbox for dsi host"
+       depends on SANDBOX
+       select VIDEO_MIPI_DSI
+       help
+         Enable support for sandbox dsi host device used for testing
+         purposes.
+         Display Serial Interface (DSI) defines a serial bus and
+         a communication protocol between the host and the device
+         (panel, bridge).
+
 config VIDEO_SIMPLE
        bool "Simple display driver for preconfigured display"
        help
index 7df9b0b..07aaca9 100644 (file)
@@ -11,6 +11,7 @@ obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o
 obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/
 obj-$(CONFIG_DISPLAY) += display-uclass.o
 obj-$(CONFIG_DM_VIDEO) += backlight-uclass.o
+obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi-host-uclass.o
 obj-$(CONFIG_DM_VIDEO) += panel-uclass.o simple_panel.o
 obj-$(CONFIG_DM_VIDEO) += video-uclass.o vidconsole-uclass.o
 obj-$(CONFIG_DM_VIDEO) += video_bmp.o
@@ -58,6 +59,7 @@ obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o
 obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
 obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o
 obj-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
+obj-$(CONFIG_VIDEO_DSI_HOST_SANDBOX) += sandbox_dsi_host.o
 obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o
 obj-$(CONFIG_VIDEO_SIMPLE) += simplefb.o
 obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o
diff --git a/drivers/video/dsi-host-uclass.c b/drivers/video/dsi-host-uclass.c
new file mode 100644 (file)
index 0000000..1db1f88
--- /dev/null
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dsi_host.h>
+
+int dsi_host_init(struct udevice *dev,
+                 struct mipi_dsi_device *device,
+                 struct display_timing *timings,
+                 unsigned int max_data_lanes,
+                 const struct mipi_dsi_phy_ops *phy_ops)
+{
+       struct dsi_host_ops *ops = dsi_host_get_ops(dev);
+
+       if (!ops->init)
+               return -ENOSYS;
+
+       return ops->init(dev, device, timings, max_data_lanes, phy_ops);
+}
+
+int dsi_host_enable(struct udevice *dev)
+{
+       struct dsi_host_ops *ops = dsi_host_get_ops(dev);
+
+       if (!ops->enable)
+               return -ENOSYS;
+
+       return ops->enable(dev);
+}
+
+UCLASS_DRIVER(dsi_host) = {
+       .id             = UCLASS_DSI_HOST,
+       .name           = "dsi_host",
+};
diff --git a/drivers/video/sandbox_dsi_host.c b/drivers/video/sandbox_dsi_host.c
new file mode 100644 (file)
index 0000000..cd644ec
--- /dev/null
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <display.h>
+#include <dm.h>
+#include <dsi_host.h>
+
+/**
+ * struct sandbox_dsi_host_priv - private data for driver
+ * @device: DSI peripheral device
+ * @timing: Display timings
+ * @max_data_lanes: maximum number of data lines
+ * @phy_ops: set of function pointers for performing physical operations
+ */
+struct sandbox_dsi_host_priv {
+       struct mipi_dsi_device *device;
+       struct display_timing *timings;
+       unsigned int max_data_lanes;
+       const struct mipi_dsi_phy_ops *phy_ops;
+};
+
+static int sandbox_dsi_host_init(struct udevice *dev,
+                                struct mipi_dsi_device *device,
+                                struct display_timing *timings,
+                                unsigned int max_data_lanes,
+                                const struct mipi_dsi_phy_ops *phy_ops)
+{
+       struct sandbox_dsi_host_priv *priv = dev_get_priv(dev);
+
+       if (!device)
+               return -1;
+
+       if (!timings)
+               return -2;
+
+       if (max_data_lanes == 0)
+               return -3;
+
+       if (!phy_ops)
+               return -4;
+
+       if (!phy_ops->init || !phy_ops->get_lane_mbps ||
+           !phy_ops->post_set_mode)
+               return -5;
+
+       priv->max_data_lanes = max_data_lanes;
+       priv->phy_ops = phy_ops;
+       priv->timings = timings;
+       priv->device = device;
+
+       return 0;
+}
+
+static int sandbox_dsi_host_enable(struct udevice *dev)
+{
+       struct sandbox_dsi_host_priv *priv = dev_get_priv(dev);
+       unsigned int lane_mbps;
+       int ret;
+
+       priv->phy_ops->init(priv->device);
+       ret = priv->phy_ops->get_lane_mbps(priv->device, priv->timings, 2,
+                                          MIPI_DSI_FMT_RGB888, &lane_mbps);
+       if (ret)
+               return -1;
+
+       priv->phy_ops->post_set_mode(priv->device, MIPI_DSI_MODE_VIDEO);
+
+       return 0;
+}
+
+struct dsi_host_ops sandbox_dsi_host_ops = {
+       .init = sandbox_dsi_host_init,
+       .enable = sandbox_dsi_host_enable,
+};
+
+static const struct udevice_id sandbox_dsi_host_ids[] = {
+       { .compatible = "sandbox,dsi-host"},
+       { }
+};
+
+U_BOOT_DRIVER(sandbox_dsi_host) = {
+       .name                 = "sandbox-dsi-host",
+       .id                   = UCLASS_DSI_HOST,
+       .of_match             = sandbox_dsi_host_ids,
+       .ops                  = &sandbox_dsi_host_ops,
+       .priv_auto_alloc_size = sizeof(struct sandbox_dsi_host_priv),
+};
index f431f3b..f7f3237 100644 (file)
@@ -40,6 +40,7 @@ enum uclass_id {
        UCLASS_CPU,             /* CPU, typically part of an SoC */
        UCLASS_CROS_EC,         /* Chrome OS EC */
        UCLASS_DISPLAY,         /* Display (e.g. DisplayPort, HDMI) */
+       UCLASS_DSI_HOST,        /* Display Serial Interface host */
        UCLASS_DMA,             /* Direct Memory Access */
        UCLASS_EFI,             /* EFI managed devices */
        UCLASS_ETH,             /* Ethernet device */
diff --git a/include/dsi_host.h b/include/dsi_host.h
new file mode 100644 (file)
index 0000000..9dfc7b3
--- /dev/null
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ *
+ */
+
+#ifndef _DSI_HOST_H
+#define _DSI_HOST_H
+
+#include <mipi_dsi.h>
+
+struct dsi_host_ops {
+       /**
+        * init() - initialized the dsi_host
+        *
+        * @dev: dsi host device
+        * @device: DSI peripheral device
+        * @timing: Display timings
+        * @max_data_lanes: maximum number of data lines
+        * @phy_ops: set of function pointers for performing physical operations
+        * @return 0 if OK, -ve on error
+        */
+       int (*init)(struct udevice *dev,
+                   struct mipi_dsi_device *device,
+                   struct display_timing *timings,
+                   unsigned int max_data_lanes,
+                   const struct mipi_dsi_phy_ops *phy_ops);
+
+       /**
+        * enable() - Enable the dsi_host
+        *
+        * @dev: dsi host device
+        * @return 0 if OK, -ve on error
+        */
+       int (*enable)(struct udevice *dev);
+
+       /**
+        * disable() - Disable the dsi_host
+        *
+        * @dev: dsi host device
+        * @return 0 if OK, -ve on error
+        */
+       int (*disable)(struct udevice *dev);
+};
+
+#define dsi_host_get_ops(dev)  ((struct dsi_host_ops *)(dev)->driver->ops)
+
+/**
+ * dsi_host_init
+ *
+ * @dev: dsi host device
+ * @device: DSI peripheral device
+ * @timing: Display timings
+ * @max_data_lanes: maximum number of data lines
+ * @phy_ops: set of function pointers for performing physical operations
+ * @return 0 if OK, -ve on error
+ */
+int dsi_host_init(struct udevice *dev,
+                 struct mipi_dsi_device *device,
+                 struct display_timing *timings,
+                 unsigned int max_data_lanes,
+                 const struct mipi_dsi_phy_ops *phy_ops);
+
+/**
+ * dsi_host_enable
+ *
+ * @dev:       dsi host device
+ * @return 0 if OK, -ve on error
+ */
+int dsi_host_enable(struct udevice *dev);
+
+#endif
index 55a7940..0c2fd5c 100644 (file)
@@ -18,6 +18,7 @@ obj-$(CONFIG_BLK) += blk.o
 obj-$(CONFIG_BOARD) += board.o
 obj-$(CONFIG_DM_BOOTCOUNT) += bootcount.o
 obj-$(CONFIG_CLK) += clk.o clk_ccf.o
+obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi_host.o
 obj-$(CONFIG_DM_ETH) += eth.o
 obj-$(CONFIG_FIRMWARE) += firmware.o
 obj-$(CONFIG_DM_GPIO) += gpio.o
diff --git a/test/dm/dsi_host.c b/test/dm/dsi_host.c
new file mode 100644 (file)
index 0000000..59fcd55
--- /dev/null
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dsi_host.h>
+#include <asm/state.h>
+#include <asm/test.h>
+#include <dm/test.h>
+#include <test/ut.h>
+
+static int dm_test_dsi_host_phy_init(void *priv_data)
+{
+       return 0;
+}
+
+static void dm_test_dsi_host_phy_post_set_mode(void *priv_data,
+                                              unsigned long mode_flags)
+{
+}
+
+static int dm_test_dsi_host_phy_get_lane_mbps(void *priv_data,
+                                             struct display_timing *timings,
+                                             u32 lanes,
+                                             u32 format,
+                                             unsigned int *lane_mbps)
+{
+       return 0;
+}
+
+static const struct mipi_dsi_phy_ops dm_test_dsi_host_phy_ops = {
+       .init = dm_test_dsi_host_phy_init,
+       .get_lane_mbps = dm_test_dsi_host_phy_get_lane_mbps,
+       .post_set_mode = dm_test_dsi_host_phy_post_set_mode,
+};
+
+/* Test that dsi_host driver functions are called */
+static int dm_test_dsi_host(struct unit_test_state *uts)
+{
+       struct udevice *dev;
+       struct mipi_dsi_device device;
+       struct display_timing timings;
+       unsigned int max_data_lanes = 4;
+
+       ut_assertok(uclass_first_device_err(UCLASS_DSI_HOST, &dev));
+
+       ut_assertok(dsi_host_init(dev, &device, &timings, max_data_lanes,
+                                 &dm_test_dsi_host_phy_ops));
+
+       ut_assertok(dsi_host_enable(dev));
+
+       return 0;
+}
+
+DM_TEST(dm_test_dsi_host, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);