USB: pl2303: add quirk for legacy devices

Add quirk for legacy devices (type 0 and 1) rather than testing on
device type throughout the driver.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 52f0c96..014dea1 100644 (file)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -33,6 +33,7 @@
 
 
 #define PL2303_QUIRK_UART_STATE_IDX0           BIT(0)
+#define PL2303_QUIRK_LEGACY                    BIT(1)
 
 static const struct usb_device_id id_table[] = {
        { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
@@ -224,6 +225,8 @@ static int pl2303_startup(struct usb_serial *serial)
 
        spriv->type = type;
        spriv->quirks = (unsigned long)usb_get_serial_data(serial);
+       if (type == TYPE_01)
+               spriv->quirks |= PL2303_QUIRK_LEGACY;
 
        usb_set_serial_data(serial, spriv);
 
@@ -237,7 +240,7 @@ static int pl2303_startup(struct usb_serial *serial)
        pl2303_vendor_read(serial, 0x8383, buf);
        pl2303_vendor_write(serial, 0, 1);
        pl2303_vendor_write(serial, 1, 0);
-       if (type == TYPE_01)
+       if (spriv->quirks & PL2303_QUIRK_LEGACY)
                pl2303_vendor_write(serial, 2, 0x24);
        else
                pl2303_vendor_write(serial, 2, 0x44);
@@ -531,7 +534,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
        }
 
        if (C_CRTSCTS(tty)) {
-               if (spriv->type == TYPE_01)
+               if (spriv->quirks & PL2303_QUIRK_LEGACY)
                        pl2303_vendor_write(serial, 0x0, 0x41);
                else
                        pl2303_vendor_write(serial, 0x0, 0x61);
@@ -571,7 +574,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
        struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
        int result;
 
-       if (spriv->type == TYPE_01) {
+       if (spriv->quirks & PL2303_QUIRK_LEGACY) {
                usb_clear_halt(serial->dev, port->write_urb->pipe);
                usb_clear_halt(serial->dev, port->read_urb->pipe);
        } else {