+commit e1893815b0999410d7a327589611c7b38e95299e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Oct 12 15:49:39 2007 +0200
+
+ GP3 SSA: enable RTC
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8002012041f1ff9f997a5727abe5015f70cd2e46
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Oct 9 13:58:24 2007 +0200
+
+ [ads5121] EEPROM support added.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Oct 5 10:40:54 2007 +0200
+
+ tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 92869195ef8210758d2176230c0a36897afd50ed
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Oct 5 09:46:06 2007 +0200
+
+ CM5200: Fix missing null-termination in hostname manipulation code
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 2 11:44:46 2007 +0200
+
+ ppc4xx: Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 2 11:44:19 2007 +0200
+
+ ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Mon Oct 1 09:51:50 2007 +0200
+
+ Program EPLD to force full duplex mode for PHY.
+
+ EPLD forces modes of PHY operation. By default full duplex is turned off.
+ This fix turns it on.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 86ec86c04326c3913178a7679aa910de071da75d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Sep 27 23:27:47 2007 +0200
+
+ Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Sep 11 14:12:55 2007 +0200
+
+ ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Sep 25 15:48:05 2007 -0600
+
+ Fpga: fix incorrect test of CFG_FPGA_XILINX macro
+
+ CFG_FPGA_XILINX is a bit value used to test against the value in
+ CONFIG_FPGA. Testing for a value will always return TRUE. I don't
+ think that is the intention in this code.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Sep 20 00:04:14 2007 +0200
+
+ v1.3.0-rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 135e19bc2773ebca487e9a8371f67e1ba202313a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 18 21:36:35 2007 +0200
+
+ Avoid compiler warning.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8a783a65851bc7421ab69f442261215e21b8891a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Sep 18 12:24:57 2007 -0600
+
+ Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
+
+ /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
+ nulls in a string differently. For example, the following statement:
+ echo "this is a string\0" > afile
+ Will produce the following with /bin/bash:
+ "this is a string\0"
+ But with /bin/dash, will produce:
+ "this is a string
+
+ Bug fixed by moving the embedded null out of the makefile and into the
+ config header. Also renamed the macro to avoid usage colision with the same
+ macro used by other board ports.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 18 17:40:27 2007 +0200
+
+ MCC200: fix build warning
+
+ The MCC200 board config file includes version.h for some customer-
+ specific setting, which causes warnings with "make depend"; build
+ version.h before depend.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit bd86220f58b99d6896198c385fda132f0c980915
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 18 13:07:54 2007 +0100
+
+ Move coloured led API to status_led.h
+ Improve indentation in drivers/at45.c
+
+commit 97213f32416ead885deafea86774e912ffd60ad0
+Author: David Saada <David.Saada@ecitele.com>
+Date: Mon Sep 17 17:04:47 2007 +0200
+
+ Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
+
+ Signed-off-by: David Saada <david.saada@ecitele.com>
+
+commit 67c31036acaaaa992fc346cc89db0909a7e733c4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 16 17:10:04 2007 +0200
+
+ TQM8xx[LM]: Fix broken environment alignment.
+
+ With recent toolchains, the environment sectors were no longer aligned to
+ sector boundaries. The reason was a combination of two bugs:
+
+ 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
+ for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
+ this gets defined, is not included here (and cannot be included
+ without causing lots of problems).
+
+ Added a new #define CFG_USE_PPCENV for all boards which really
+ want to put the environment is a ".ppcenv" section.
+
+ 2) The linker scripts just include environment.o, silently assuming
+ that the objects in that file are really in the order in which
+ they are coded in the C file, i. e. "environment" first, then
+ "redundand_environment", and "env_size" last. However, current
+ toolchains (GCC-4.x) reorder the objects, causing the environment
+ data not to start on a flash sector boundary:
+
+ Instead of: we got:
+
+ 40008000 T environment 40008000 T env_size
+ 4000c000 T redundand_environment 40008004 T redundand_environment
+ 40010000 T env_size 4000c004 T environment
+
+ Note: this patch fixes just the first part, and cures the alignment
+ problem by making sure that "env_size" gets placed correctly. However,
+ we still have a potential issue because primary and redundant
+ environment sectors are actually swapped, i. e. we have now:
+
+ 40008000 T redundand_environment
+ 4000c000 T environment
+ 40010000 T env_size
+
+ This shall be fixed in the next version.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit eb6da8050797c204c9d010548424186c7ce32fc1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 16 02:39:35 2007 +0200
+
+ TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cd2d1602c54cc6957bdef3872272a4b264893960
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date: Mon Sep 10 14:54:56 2007 -0400
+
+ Typo fix in tsec.c
+
+ Fixup for the break statement in wrong place.
+
+ [Patch by urwithsughosh@gmail.com]
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 11 17:04:00 2007 +0200
+
+ Fix do_div() usage in nand process output
+
+ Fix usage of do_div() in nand erase|read|write process output.
+
+ The last patch to nand_util.c introduced do_div() instead of libgcc's
+ implementation. But do_div() returns the quotient in its first
+ macro parameter and not as result.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit c750d2e6692a000a82f29de7bf24e3dc21239161
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Sep 12 12:36:53 2007 +0200
+
+ NAND: Add CFG_NAND_QUIET option
+
+ This config option sets the default for the progress information
+ output behavior that can also be configured through the 'quiet'
+ environment variable.
+
+ The legacy NAND code does not print the current progress info
+ on the console. So this option is for backward compatibility for
+ units that are in the field and where setting the quiet variable
+ is not an option. With CFG_NAND_QUIET set to '1' the console
+ progress info is turned off. This can still be overwritten
+ through the environment variable.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit dcb88630290d2bcd803386dd4c2be73142994c4f
+Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
+Date: Thu Sep 13 16:06:05 2007 -0700
+
+ ColdFire: fix build error becasue of bad type of mii_init()
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
+Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
+Date: Thu Sep 13 16:04:05 2007 -0700
+
+ ColdFire: Fix build error caused by pixis.c
+
+ Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit e21659e30660a1377c42af135a6114efe39801d9
+Author: Sam Sparks <SSparks@twacs.com>
+Date: Fri Sep 14 11:14:42 2007 -0600
+
+ Update MPC8349ITX*_config to place config.tmp in right place.
+
+ MPC834ITX*_config does not store config.tmp at the correct locatation,
+ causing MPC8349ITXGP to have the wrong TEXT_BASE.
+
+ Signed-off-by: Sam Sparks <SSparks@twacs.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 1218abf1b5817a39a82399b4b928b00750575bda
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Sep 15 20:48:41 2007 +0200
+
+ Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 66b3f24d665be678a9dbb125b1e84185400f63b5
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Sep 15 11:55:42 2007 +0200
+
+ Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
+
+ As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
+ function local.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+ [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
+
+commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Sep 13 18:21:48 2007 +0200
+
+ cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Sep 13 16:33:59 2007 +0200
+
+ tqm5200: Restore customary env. variable boot commands for powerpc kernels
+
+ - update default definitions of kernel_addr and fdt_addr env. variables
+ - make arch/powerpc booting the default scenario
+ - update MTD partition layout to match the above
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit f34024d4a328e6edd906456da98d2c537155c4f7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Sep 12 00:48:57 2007 +0200
+
+ Fix memory corruption problem on STX GP3 SSA Board.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 11 15:35:01 2007 +0100
+
+ Final tidy
+
+commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Sep 11 15:42:11 2007 +0200
+
+ [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
+ scan on second pci bus.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Sep 11 12:57:52 2007 +0200
+
+ [ppc4xx] Individual handling of sdram.c for bamboo_nand build
+
+ Bamboo has a file sdram.c which needs special treatment when building in
+ separate directory. It has to be linked to build directory otherwise it is
+ not seen.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 38c1ef728d19950414a8ab1ccfc53767848fa346
+Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
+Date: Mon Sep 10 16:55:59 2007 +0100
+
+ Allocate CPU Architecture Code for STMicroelectronics' ST200.
+
+ Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
+ ---------------------------------------------------
+
+commit 754bac48156f8958d8f6a53a51eda88ab5758929
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 10 20:42:31 2007 +0200
+
+ Update version to match current state.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Mon Sep 10 17:39:08 2007 +0200
+
+ [MPC512x] Streamline frame handling in the FEC driver
+
+ - convert frame size settings to be derived from a single base
+ - set frame size to the recommended default value
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 11:34:00 2007 +0900
+
+ Remove compiler warning: target CPU does not support interworking
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 9 21:21:33 2007 +0200
+
+ Fix compile error in spc1920 config.
+
+ Signed-off-by: Markus Klotzbücher <mk@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Fri Sep 7 09:25:07 2007 -0600
+
+ Bugfix: make bootm+libfdt compile on boards with no flash
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 18:35:37 2007 +0200
+
+ [PPC440SPe] PCIe environment settings for Katmai and Yucca
+
+ - 'pciconfighost' is set by default in order to be able to scan bridges
+ behind the primary host/PCIe
+
+ - 'pciscandelay' env variable is recognized to allow for user-controlled
+ delay before the PCIe bus enumeration; some peripheral devices require a
+ significant delay before they can be scanned (e.g. LSI8408E); without the
+ delay they are not detected
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 7f1913938984ef6c6a46cb53e003719196d9c5de
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 18:20:23 2007 +0200
+
+ [PPC440SPe] Improve PCIe configuration space access
+
+ - correct configuration space mapping
+ - correct bus numbering
+ - better access to config space
+
+ Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
+ first device on the first bus. We now allow to configure up to 16 buses;
+ also, scanning for devices behind the PCIe-PCIe bridge is supported, so
+ peripheral devices farther in hierarchy can be identified.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 17:46:18 2007 +0200
+
+ [PPC440SPe] Convert machine check exceptions handling
+
+ Convert using fixup mechanism to suppressing MCK for the duration of config
+ read/write transaction: while fixups work fine with the case of a precise
+ exception, we identified a major drawback with this approach when there's
+ an imprecise case. In this scenario there is the following race condition:
+ the fixup is (by design) set to catch the instruction following the one
+ actually causing the exception; if an interrupt (e.g. decrementer) happens
+ between those two instructions, the ISR code is executed before the fixup
+ handler the machine check is no longer protected by the fixup handler as it
+ appears as within the ISR code. In consequence the fixup approach is being
+ phased out and replaced with explicit suppressing of MCK during a PCIe
+ config read/write cycle.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit ff7640c9ead8806b5d827f2b29f9cb2632add729
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 7 17:43:36 2007 +0200
+
+ Fix typo in MAKEALL script.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 17:09:21 2007 +0200
+
+ [MPC512x] Proper handling of larger frames in the FEC driver
+
+ When frame larger than local RX buffer is received, it is split and handled
+ by two buffer descriptors. Prior to this patch the FEC driver discarded
+ contents of a buffer descriptor without the 'LAST' bit set, so the first
+ part of the frame was lost in case of larger frames. This fix allows to
+ safely combine the two pieces into the whole frame.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Sep 7 17:05:36 2007 +0200
+
+ [MPC512x] Correct fixup relocation
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit a89cbbd27a60e6740772000fd0688ffba1c2576a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 7 01:21:25 2007 +0200
+
+ Update CHANGELOG, minor coding style cleanup.
+
commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
Author: stefano babic <sbabic@denx.de>
Date: Thu Aug 30 23:01:49 2007 +0200
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+commit 80767a6cead9990d9e77e62be947843c2c72f469
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed Sep 5 16:04:41 2007 +0100
+
+ Changed API name to coloured_led.h
+ Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
+ Tidied other cpu/arm920t/start.S code
+
commit 56a9270521baaa00e12639a978302a67f61ef060
Author: Kumar Gala <galak@kernel.crashing.org>
Date: Thu Aug 30 16:18:18 2007 -0500
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 16:18:38 2007 +0100
+
+ Add coloured led interface for ARM boards.
+ Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
+
+commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:49:28 2007 +0100
+
+ Move include/led.h to board/at91rm9200dk
+
+commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:25:51 2007 +0100
+
+ Ran Lindent on drivers/at45.c
+
+commit 557ab89d294f08dd532f21d19861b40093200a33
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:23:50 2007 +0100
+
+ Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
+
commit 81b73dec16fd1227369a191e725e10044a9d56b8
Author: Gary Jennejohn <garyj@denx.de>
Date: Fri Aug 31 15:21:46 2007 +0200
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 29 16:31:18 2007 +0200
+
+ ppc4xx: Change lwmon5 default environment to support Linux RTC
+
+ The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
+ to supply the RTC I2C address as bootline parameter. This patch
+ adds support for this rtc probing parameter to the bootargs:
+
+ "rtc-pcf8563.probe=0,0x51"
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
Author: Kim Phillips <kim.phillips@freescale.com>
Date: Wed Aug 29 09:06:05 2007 -0500
VERSION = 1
PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
env:
$(MAKE) -C tools/env all || exit 1
-depend dep:
+depend dep: version
for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
tags ctags:
echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \
- echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>$(obj)include/config.h
+ echo "#define CFG_BOOTFILE_PATH \"/tftpboot/tqm$${CTYPE}/uImage\"">>$(obj)include/config.h
@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
#########################################################################
************************************************************************/
int board_early_init_f(void)
{
- volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
-
mtebc( pb0ap, 0x03800000 ); /* set chip selects */
mtebc( pb0cr, 0xffc58000 ); /* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
mtebc( pb1ap, 0x03800000 );
mtdcr( uic0sr, 0x00000000 ); /* clear all interrupts */
mtdcr( uic0sr, 0xffffffff );
- x->ethuart &= ~EPLD2_RESET_ETH_N; /* put Ethernet+PHY in reset */
-
return 0;
}
int misc_init_r(void)
{
volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
- x->ethuart |= EPLD2_RESET_ETH_N; /* take Ethernet+PHY out of reset */
+
+ /* set modes of operation */
+ x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 |
+ EPLD2_ETH_MODE_1000 | EPLD2_ETH_DUPLEX_MODE;
+ /* clear ETHERNET_AUTO_NEGO bit to turn on autonegotiation */
+ x->ethuart &= ~EPLD2_ETH_AUTO_NEGO;
+
+ /* put Ethernet+PHY in reset */
+ x->ethuart &= ~EPLD2_RESET_ETH_N;
+ udelay(10000);
+ /* take Ethernet+PHY out of reset */
+ x->ethuart |= EPLD2_RESET_ETH_N;
return 0;
}
}
-void LED_init (void)
+void coloured_LED_init (void)
{
AT91PS_PIO PIOB = AT91C_BASE_PIOB;
AT91PS_PMC PMC = AT91C_BASE_PMC;
"operational\n");
/* set the hostname appropriate to the module we're running on */
+ hostname[0] = 0x00;
compose_hostname(hw_id, hostname);
setenv("hostname", hostname);
/* Convert bitstream data and load into the fpga */
int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
{
+#if (CONFIG_FPGA & CFG_FPGA_XILINX)
unsigned int length;
unsigned char* swapdata;
unsigned int swapsize;
dataptr = (unsigned char *)fpgadata;
-#if CFG_FPGA_XILINX
/* skip the first bytes of the bitsteam, their meaning is unknown */
length = (*dataptr << 8) + *(dataptr+1);
dataptr+=2;
#elif defined(CONFIG_LPC2292)
+DECLARE_GLOBAL_DATA_PTR;
+
#include <asm/arch/hardware.h>
void serial_setbrg (void)
#include <config.h>
#include <version.h>
-#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
-#include <led.h>
-#endif
+#include <status_led.h>
/*
*************************************************************************
.globl _start
-_start: b reset
+_start: b start_code
ldr pc, _undefined_instruction
ldr pc, _software_interrupt
ldr pc, _prefetch_abort
/*
*************************************************************************
*
- * Startup Code (reset vector)
+ * Startup Code (called from the ARM reset exception vector)
*
* do important init only if we don't start from memory!
* relocate armboot to ram
/*
- * the actual reset code
+ * the actual start code
*/
-reset:
+start_code:
/*
* set the cpu to SVC32 mode
*/
orr r0,r0,#0xd3
msr cpsr,r0
-#if CONFIG_AT91RM9200
-#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
- bl LED_init
+ bl coloured_LED_init
bl red_LED_on
-#endif
-#ifdef CONFIG_BOOTBINFUNC
-/* code based on entry.S from ATMEL */
-#define AT91C_BASE_CKGR 0xFFFFFC20
-#define CKGR_MOR 0
- /* Get the CKGR Base Address */
- ldr r1, =AT91C_BASE_CKGR
-
-/* Main oscillator Enable register APMC_MOR : Enable main oscillator , OSCOUNT = 0xFF */
-/* ldr r0, = AT91C_CKGR_MOSCEN:OR:AT91C_CKGR_OSCOUNT */
- ldr r0, =0x0000FF01
- str r0, [r1, #CKGR_MOR]
- /* Add loop to compensate Main Oscillator startup time */
- ldr r0, =0x00000010
-LoopOsc:
- subs r0, r0, #1
- bhi LoopOsc
- /* scratch stack */
- ldr r1, =0x00204000
- /* Insure word alignment */
- bic r1, r1, #3
- /* Init stack SYS */
- mov sp, r1
- /*
- * This does a lot more than just set up the memory, which
- * is why it's called lowlevelinit
- */
- bl lowlevelinit /* in memsetup.S */
- bl icache_enable;
- /* ------------------------------------
- * Read/modify/write CP15 control register
- * -------------------------------------
- * read cp15 control register (cp15 r1) in r0
- * ------------------------------------
- */
- mrc p15, 0, r0, c1, c0, 0
- /* Reset bit :Little Endian end fast bus mode */
- ldr r3, =0xC0000080
- /* Set bit :Asynchronous clock mode, Not Fast Bus */
- ldr r4, =0xC0000000
- bic r0, r0, r3
- orr r0, r0, r4
- /* write r0 in cp15 control register (cp15 r1) */
- mcr p15, 0, r0, c1, c0, 0
-#endif /* CONFIG_BOOTBINFUNC */
+#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
/*
- * relocate exeception table
+ * relocate exception table
*/
ldr r0, =_start
ldr r1, =0x0
bne copyex
#endif
-/* turn off the watchdog */
-#if defined(CONFIG_S3C2400)
-# define pWTCON 0x15300000
-# define INTMSK 0x14400008 /* Interupt-Controller base addresses */
-# define CLKDIVN 0x14800014 /* clock divisor register */
-#elif defined(CONFIG_S3C2410)
-# define pWTCON 0x53000000
-# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */
-# define INTSUBMSK 0x4A00001C
-# define CLKDIVN 0x4C000014 /* clock divisor register */
-#endif
-
#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
+ /* turn off the watchdog */
+
+# if defined(CONFIG_S3C2400)
+# define pWTCON 0x15300000
+# define INTMSK 0x14400008 /* Interupt-Controller base addresses */
+# define CLKDIVN 0x14800014 /* clock divisor register */
+#else
+# define pWTCON 0x53000000
+# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */
+# define INTSUBMSK 0x4A00001C
+# define CLKDIVN 0x4C000014 /* clock divisor register */
+# endif
+
ldr r0, =pWTCON
mov r1, #0x0
str r1, [r0]
#endif
#ifdef CONFIG_AT91RM9200
-#ifdef CONFIG_BOOTBINFUNC
-relocate: /* relocate U-Boot to RAM */
- adr r0, _start /* r0 <- current position of code */
- ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
- cmp r0, r1 /* don't reloc during debug */
- beq stack_setup
-
- ldr r2, _armboot_start
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
-copy_loop:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end addreee [r2] */
- ble copy_loop
-#endif /* CONFIG_BOOTBINFUNC */
-#else
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
relocate: /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */
cmp r0, r1
ble clbss_l
-#if 0
- /* try doing this stuff after the relocation */
- ldr r0, =pWTCON
- mov r1, #0x0
- str r1, [r0]
-
- /*
- * mask all IRQs by setting all bits in the INTMR - default
- */
- mov r1, #0xffffffff
- ldr r0, =INTMR
- str r1, [r0]
-
- /* FCLK:HCLK:PCLK = 1:2:4 */
- /* default FCLK is 120 MHz ! */
- ldr r0, =CLKDIVN
- mov r1, #3
- str r1, [r0]
- /* END stuff after relocation */
-#endif
-
ldr pc, _start_armboot
_start_armboot: .word start_armboot
if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
return 0;
-
+
address = pcie_get_base(hose, devfn);
offset += devfn << 4;
int offset, int len, u32 val) {
u8 *address;
-
+
/*
* Bus numbers are relative to hose->first_busno
*/
devfn -= PCI_BDF(hose->first_busno, 0, 0);
-
+
/*
* Same constraints as in pcie_read_config().
*/
if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
return 0;
-
+
address = pcie_get_base(hose, devfn);
offset += devfn << 4;
in_le16((u16 *)(mbase + PCI_COMMAND)) |
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
printf("PCIE:%d successfully set as rootpoint\n",port);
-
+
/* Set Device and Vendor Id */
switch (port) {
case 0:
#define BI_PHYMODE_MII 7
#endif
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GRX) || defined(CONFIG_440SP)
#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
#endif
int ethgroup = -1;
#endif
#endif
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
unsigned long mfr;
#endif
__asm__ volatile ("eieio");
/* reset emac so we have access to the phy */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
if (failsafe <= 0)
printf("\nProblem resetting EMAC!\n");
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
/* set speed */
if (speed == _1000BASET) {
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
unsigned long pfc1;
mfsdr (sdr_pfc1, pfc1);
/*
* spi.c API
*/
-extern unsigned int AT91F_SpiWrite (AT91PS_DataflashDesc pDesc);
-extern void AT91F_SpiEnable(int cs);
+extern unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc);
+extern void AT91F_SpiEnable(int cs);
#define AT91C_TIMEOUT_WRDY 200000
-
/*----------------------------------------------------------------------*/
/* \fn AT91F_DataFlashSendCommand */
/* \brief Generic function to send a command to the dataflash */
/*----------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashSendCommand(
- AT91PS_DataFlash pDataFlash,
- unsigned char OpCode,
- unsigned int CmdSize,
- unsigned int DataflashAddress)
+AT91S_DataFlashStatus AT91F_DataFlashSendCommand(AT91PS_DataFlash pDataFlash,
+ unsigned char OpCode,
+ unsigned int CmdSize,
+ unsigned int DataflashAddress)
{
unsigned int adr;
- if ( (pDataFlash->pDataFlashDesc->state) != IDLE)
+ if ((pDataFlash->pDataFlashDesc->state) != IDLE)
return DATAFLASH_BUSY;
/* process the address to obtain page address and byte address */
adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) <<
- pDataFlash->pDevice->page_offset) + (DataflashAddress %
- (pDataFlash->pDevice->pages_size));
+ pDataFlash->pDevice->page_offset) +
+ (DataflashAddress % (pDataFlash->pDevice->pages_size));
- /* fill the command buffer */
+ /* fill the command buffer */
pDataFlash->pDataFlashDesc->command[0] = OpCode;
if (pDataFlash->pDevice->pages_number >= 16384) {
pDataFlash->pDataFlashDesc->command[1] =
pDataFlash->pDataFlashDesc->command[7] = 0;
/* Initialize the SpiData structure for the spi write fuction */
- pDataFlash->pDataFlashDesc->tx_cmd_pt =
+ pDataFlash->pDataFlashDesc->tx_cmd_pt =
pDataFlash->pDataFlashDesc->command;
- pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize;
- pDataFlash->pDataFlashDesc->rx_cmd_pt =
+ pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize;
+ pDataFlash->pDataFlashDesc->rx_cmd_pt =
pDataFlash->pDataFlashDesc->command;
- pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize;
+ pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize;
/* send the command and read the data */
- return AT91F_SpiWrite (pDataFlash->pDataFlashDesc); }
-
+ return AT91F_SpiWrite(pDataFlash->pDataFlashDesc);
+}
/*----------------------------------------------------------------------*/
/* \fn AT91F_DataFlashGetStatus */
AT91S_DataFlashStatus status;
/* if a transfert is in progress ==> return 0 */
- if( (pDesc->state) != IDLE)
+ if ((pDesc->state) != IDLE)
return DATAFLASH_BUSY;
/* first send the read status command (D7H) */
pDesc->command[0] = DB_STATUS;
pDesc->command[1] = 0;
- pDesc->DataFlash_state = GET_STATUS;
- pDesc->tx_data_size = 0; /* Transmit the command */
- /* and receive response */
- pDesc->tx_cmd_pt = pDesc->command;
- pDesc->rx_cmd_pt = pDesc->command;
- pDesc->rx_cmd_size = 2;
- pDesc->tx_cmd_size = 2;
- status = AT91F_SpiWrite (pDesc);
+ pDesc->DataFlash_state = GET_STATUS;
+ pDesc->tx_data_size = 0; /* Transmit the command */
+ /* and receive response */
+ pDesc->tx_cmd_pt = pDesc->command;
+ pDesc->rx_cmd_pt = pDesc->command;
+ pDesc->rx_cmd_size = 2;
+ pDesc->tx_cmd_size = 2;
+ status = AT91F_SpiWrite(pDesc);
- pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1);
+ pDesc->DataFlash_state = *((unsigned char *)(pDesc->rx_cmd_pt) + 1);
return status;
}
-
/*----------------------------------------------------------------------*/
/* \fn AT91F_DataFlashWaitReady */
/* \brief wait for dataflash ready (bit7 of the status register == 1) */
/*----------------------------------------------------------------------*/
AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc
-pDataFlashDesc, unsigned int timeout)
+ pDataFlashDesc,
+ unsigned int timeout)
{
pDataFlashDesc->DataFlash_state = IDLE;
do {
AT91F_DataFlashGetStatus(pDataFlashDesc);
timeout--;
- } while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) &&
- (timeout > 0) );
+ } while (((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) &&
+ (timeout > 0));
- if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80)
+ if ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80)
return DATAFLASH_ERROR;
return DATAFLASH_OK;
}
-
/*--------------------------------------------------------------------------*/
/* Function Name : AT91F_DataFlashContinuousRead */
/* Object : Continuous stream Read */
/* : <sizeToRead> = data buffer size */
/* Return value : State of the dataflash */
/*--------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashContinuousRead (
- AT91PS_DataFlash pDataFlash,
- int src,
- unsigned char *dataBuffer,
- int sizeToRead )
+AT91S_DataFlashStatus AT91F_DataFlashContinuousRead(
+ AT91PS_DataFlash pDataFlash,
+ int src,
+ unsigned char *dataBuffer,
+ int sizeToRead)
{
AT91S_DataFlashStatus status;
/* Test the size to read in the device */
- if ( (src + sizeToRead) >
- (pDataFlash->pDevice->pages_size *
- (pDataFlash->pDevice->pages_number)))
+ if ((src + sizeToRead) >
+ (pDataFlash->pDevice->pages_size *
+ (pDataFlash->pDevice->pages_number)))
return DATAFLASH_MEMORY_OVERFLOW;
pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer;
pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer;
pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead;
- status = AT91F_DataFlashSendCommand
- (pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src);
+ status = AT91F_DataFlashSendCommand(
+ pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src);
/* Send the command to the dataflash */
- return(status);
+ return (status);
}
-
/*---------------------------------------------------------------------------*/
/* Function Name : AT91F_DataFlashPagePgmBuf */
/* Object : Main memory page program thru buffer 1 or buffer 2 */
/* : <SizeToWrite> = data buffer size */
/* Return value : State of the dataflash */
/*---------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(
- AT91PS_DataFlash pDataFlash,
- unsigned char *src,
- unsigned int dest,
- unsigned int SizeToWrite)
+AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(AT91PS_DataFlash pDataFlash,
+ unsigned char *src,
+ unsigned int dest,
+ unsigned int SizeToWrite)
{
int cmdsize;
pDataFlash->pDataFlashDesc->tx_data_pt = src;
/* Send the command to the dataflash */
if (pDataFlash->pDevice->pages_number >= 16384)
cmdsize = 5;
- return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1,
-cmdsize, dest)); }
-
+ return (AT91F_DataFlashSendCommand(
+ pDataFlash, DB_PAGE_PGM_BUF1, cmdsize, dest));
+}
/*---------------------------------------------------------------------------*/
/* Function Name : AT91F_MainMemoryToBufferTransfert */
/* Return value : State of the dataflash */
/*---------------------------------------------------------------------------*/
AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert(
- AT91PS_DataFlash pDataFlash,
- unsigned char BufferCommand,
- unsigned int page)
+ AT91PS_DataFlash
+ pDataFlash,
+ unsigned char
+ BufferCommand,
+ unsigned int page)
{
int cmdsize;
/* Test if the buffer command is legal */
- if ((BufferCommand != DB_PAGE_2_BUF1_TRF)
- && (BufferCommand != DB_PAGE_2_BUF2_TRF))
+ if ((BufferCommand != DB_PAGE_2_BUF1_TRF) &&
+ (BufferCommand != DB_PAGE_2_BUF2_TRF)) {
return DATAFLASH_BAD_COMMAND;
+ }
/* no data to transmit or receive */
pDataFlash->pDataFlashDesc->tx_data_size = 0;
cmdsize = 4;
if (pDataFlash->pDevice->pages_number >= 16384)
cmdsize = 5;
- return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize,
-page*pDataFlash->pDevice->pages_size));
+ return (AT91F_DataFlashSendCommand(
+ pDataFlash, BufferCommand, cmdsize,
+ page * pDataFlash->pDevice->pages_size));
}
-
/*-------------------------------------------------------------------------- */
/* Function Name : AT91F_DataFlashWriteBuffer */
/* Object : Write data to the internal sram buffer 1 or 2 */
/* : <SizeToWrite> = data buffer size */
/* Return value : State of the dataflash */
/*---------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer (
- AT91PS_DataFlash pDataFlash,
- unsigned char BufferCommand,
- unsigned char *dataBuffer,
- unsigned int bufferAddress,
- int SizeToWrite )
+AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer(
+ AT91PS_DataFlash pDataFlash,
+ unsigned char BufferCommand,
+ unsigned char *dataBuffer,
+ unsigned int bufferAddress,
+ int SizeToWrite)
{
int cmdsize;
/* Test if the buffer command is legal */
- if ((BufferCommand != DB_BUF1_WRITE)
- && (BufferCommand != DB_BUF2_WRITE))
+ if ((BufferCommand != DB_BUF1_WRITE) &&
+ (BufferCommand != DB_BUF2_WRITE)) {
return DATAFLASH_BAD_COMMAND;
+ }
/* buffer address must be lower than page size */
if (bufferAddress > pDataFlash->pDevice->pages_size)
return DATAFLASH_BAD_ADDRESS;
- if ( (pDataFlash->pDataFlashDesc->state) != IDLE)
+ if ((pDataFlash->pDataFlashDesc->state) != IDLE)
return DATAFLASH_BUSY;
/* Send first Write Command */
pDataFlash->pDataFlashDesc->command[0] = BufferCommand;
pDataFlash->pDataFlashDesc->command[1] = 0;
if (pDataFlash->pDevice->pages_number >= 16384) {
- pDataFlash->pDataFlashDesc->command[2] = 0;
- pDataFlash->pDataFlashDesc->command[3] =
+ pDataFlash->pDataFlashDesc->command[2] = 0;
+ pDataFlash->pDataFlashDesc->command[3] =
(unsigned char)(((unsigned int)(bufferAddress &
- pDataFlash->pDevice->byte_mask)) >> 8);
- pDataFlash->pDataFlashDesc->command[4] =
- (unsigned char)((unsigned int)bufferAddress & 0x00FF);
+ pDataFlash->pDevice->
+ byte_mask)) >> 8);
+ pDataFlash->pDataFlashDesc->command[4] =
+ (unsigned char)((unsigned int)bufferAddress & 0x00FF);
cmdsize = 5;
} else {
- pDataFlash->pDataFlashDesc->command[2] =
+ pDataFlash->pDataFlashDesc->command[2] =
(unsigned char)(((unsigned int)(bufferAddress &
- pDataFlash->pDevice->byte_mask)) >> 8);
- pDataFlash->pDataFlashDesc->command[3] =
- (unsigned char)((unsigned int)bufferAddress & 0x00FF);
- pDataFlash->pDataFlashDesc->command[4] = 0;
+ pDataFlash->pDevice->
+ byte_mask)) >> 8);
+ pDataFlash->pDataFlashDesc->command[3] =
+ (unsigned char)((unsigned int)bufferAddress & 0x00FF);
+ pDataFlash->pDataFlashDesc->command[4] = 0;
cmdsize = 4;
}
- pDataFlash->pDataFlashDesc->tx_cmd_pt =
+ pDataFlash->pDataFlashDesc->tx_cmd_pt =
pDataFlash->pDataFlashDesc->command;
pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize;
- pDataFlash->pDataFlashDesc->rx_cmd_pt =
+ pDataFlash->pDataFlashDesc->rx_cmd_pt =
pDataFlash->pDataFlashDesc->command;
pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize;
- pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer;
- pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer;
- pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite;
- pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite;
+ pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer;
+ pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer;
+ pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite;
+ pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite;
return AT91F_SpiWrite(pDataFlash->pDataFlashDesc);
}
/* Return value : State of the dataflash */
/*---------------------------------------------------------------------------*/
AT91S_DataFlashStatus AT91F_PageErase(
- AT91PS_DataFlash pDataFlash,
- unsigned int page)
+ AT91PS_DataFlash pDataFlash,
+ unsigned int page)
{
int cmdsize;
/* Test if the buffer command is legal */
/* no data to transmit or receive */
- pDataFlash->pDataFlashDesc->tx_data_size = 0;
+ pDataFlash->pDataFlashDesc->tx_data_size = 0;
cmdsize = 4;
if (pDataFlash->pDevice->pages_number >= 16384)
cmdsize = 5;
- return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_ERASE, cmdsize,
-page*pDataFlash->pDevice->pages_size));
+ return (AT91F_DataFlashSendCommand(pDataFlash,
+ DB_PAGE_ERASE, cmdsize,
+ page * pDataFlash->pDevice->pages_size));
}
-
/*---------------------------------------------------------------------------*/
/* Function Name : AT91F_BlockErase */
/* Object : Erase a Block */
/* Return value : State of the dataflash */
/*---------------------------------------------------------------------------*/
AT91S_DataFlashStatus AT91F_BlockErase(
- AT91PS_DataFlash pDataFlash,
- unsigned int block)
+ AT91PS_DataFlash pDataFlash,
+ unsigned int block)
{
int cmdsize;
/* Test if the buffer command is legal */
/* no data to transmit or receive */
- pDataFlash->pDataFlashDesc->tx_data_size = 0;
+ pDataFlash->pDataFlashDesc->tx_data_size = 0;
cmdsize = 4;
if (pDataFlash->pDevice->pages_number >= 16384)
cmdsize = 5;
- return(AT91F_DataFlashSendCommand (pDataFlash, DB_BLOCK_ERASE,cmdsize,
-block*8*pDataFlash->pDevice->pages_size));
+ return (AT91F_DataFlashSendCommand(pDataFlash, DB_BLOCK_ERASE, cmdsize,
+ block * 8 *
+ pDataFlash->pDevice->pages_size));
}
/*---------------------------------------------------------------------------*/
/* : <dest> = main memory address */
/* Return value : State of the dataflash */
/*---------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_WriteBufferToMain (
- AT91PS_DataFlash pDataFlash,
- unsigned char BufferCommand,
- unsigned int dest )
+AT91S_DataFlashStatus AT91F_WriteBufferToMain(AT91PS_DataFlash pDataFlash,
+ unsigned char BufferCommand,
+ unsigned int dest)
{
int cmdsize;
/* Test if the buffer command is correct */
if ((BufferCommand != DB_BUF1_PAGE_PGM) &&
- (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) &&
- (BufferCommand != DB_BUF2_PAGE_PGM) &&
- (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) )
+ (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) &&
+ (BufferCommand != DB_BUF2_PAGE_PGM) &&
+ (BufferCommand != DB_BUF2_PAGE_ERASE_PGM))
return DATAFLASH_BAD_COMMAND;
/* no data to transmit or receive */
if (pDataFlash->pDevice->pages_number >= 16384)
cmdsize = 5;
/* Send the command to the dataflash */
- return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize,
- dest)); }
-
+ return (AT91F_DataFlashSendCommand(pDataFlash, BufferCommand,
+ cmdsize, dest));
+}
/*---------------------------------------------------------------------------*/
/* Function Name : AT91F_PartialPageWrite */
/* : <AdrInpage> = adr to begin the fading */
/* : <length> = Number of bytes to erase */
/*---------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_PartialPageWrite (
- AT91PS_DataFlash pDataFlash,
- unsigned char *src,
- unsigned int dest,
- unsigned int size)
+AT91S_DataFlashStatus AT91F_PartialPageWrite(AT91PS_DataFlash pDataFlash,
+ unsigned char *src,
+ unsigned int dest,
+ unsigned int size)
{
unsigned int page;
unsigned int AdrInPage;
AdrInPage = dest % (pDataFlash->pDevice->pages_size);
/* Read the contents of the page in the Sram Buffer */
- AT91F_MainMemoryToBufferTransfert(pDataFlash,
- DB_PAGE_2_BUF1_TRF, page);
+ AT91F_MainMemoryToBufferTransfert(pDataFlash, DB_PAGE_2_BUF1_TRF, page);
AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc,
- AT91C_TIMEOUT_WRDY);
+ AT91C_TIMEOUT_WRDY);
/*Update the SRAM buffer */
AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src,
AdrInPage, size);
AT91F_PageErase(pDataFlash, page);
/* Rewrite the modified Sram Buffer in the main memory */
AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc,
- AT91C_TIMEOUT_WRDY);
+ AT91C_TIMEOUT_WRDY);
}
/* Rewrite the modified Sram Buffer in the main memory */
- return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM,
- (page*pDataFlash->pDevice->pages_size)));
+ return (AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM,
+ (page *
+ pDataFlash->pDevice->pages_size)));
}
/*---------------------------------------------------------------------------*/
/* : <dest> = dataflash adress */
/* : <size> = data buffer size */
/*---------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashWrite(
- AT91PS_DataFlash pDataFlash,
- unsigned char *src,
- int dest,
- int size )
+AT91S_DataFlashStatus AT91F_DataFlashWrite(AT91PS_DataFlash pDataFlash,
+ unsigned char *src,
+ int dest, int size)
{
unsigned int length;
unsigned int page;
AT91F_SpiEnable(pDataFlash->pDevice->cs);
- if ( (dest + size) > (pDataFlash->pDevice->pages_size *
- (pDataFlash->pDevice->pages_number)))
+ if ((dest + size) > (pDataFlash->pDevice->pages_size *
+ (pDataFlash->pDevice->pages_number)))
return DATAFLASH_MEMORY_OVERFLOW;
/* If destination does not fit a page start address */
- if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0 )
- {
- length = pDataFlash->pDevice->pages_size -
- (dest %
- ((unsigned int)
- (pDataFlash->pDevice->pages_size)));
+ if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0) {
+ length =
+ pDataFlash->pDevice->pages_size -
+ (dest % ((unsigned int)(pDataFlash->pDevice->pages_size)));
if (size < length)
length = size;
- if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length))
+ if (!AT91F_PartialPageWrite(pDataFlash, src, dest, length))
return DATAFLASH_ERROR;
AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc,
- AT91C_TIMEOUT_WRDY);
+ AT91C_TIMEOUT_WRDY);
/* Update size, source and destination pointers */
size -= length;
src += length;
}
- while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) {
+ while ((size - pDataFlash->pDevice->pages_size) >= 0) {
/* program dataflash page */
page = (unsigned int)dest / (pDataFlash->pDevice->pages_size);
status = AT91F_DataFlashWriteBuffer(pDataFlash,
- DB_BUF1_WRITE, src, 0,
- pDataFlash->pDevice->pages_size);
+ DB_BUF1_WRITE, src, 0,
+ pDataFlash->pDevice->
+ pages_size);
AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc,
- AT91C_TIMEOUT_WRDY);
+ AT91C_TIMEOUT_WRDY);
status = AT91F_PageErase(pDataFlash, page);
AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc,
- AT91C_TIMEOUT_WRDY);
+ AT91C_TIMEOUT_WRDY);
if (!status)
return DATAFLASH_ERROR;
- status = AT91F_WriteBufferToMain (pDataFlash,
- DB_BUF1_PAGE_PGM, dest);
- if(!status)
+ status = AT91F_WriteBufferToMain(pDataFlash,
+ DB_BUF1_PAGE_PGM, dest);
+ if (!status)
return DATAFLASH_ERROR;
AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc,
- AT91C_TIMEOUT_WRDY);
+ AT91C_TIMEOUT_WRDY);
/* Update size, source and destination pointers */
size -= pDataFlash->pDevice->pages_size;
dest += pDataFlash->pDevice->pages_size;
- src += pDataFlash->pDevice->pages_size;
+ src += pDataFlash->pDevice->pages_size;
}
/* If still some bytes to read */
- if ( size > 0 ) {
+ if (size > 0) {
/* program dataflash page */
- if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) )
+ if (!AT91F_PartialPageWrite(pDataFlash, src, dest, size))
return DATAFLASH_ERROR;
AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc,
- AT91C_TIMEOUT_WRDY);
+ AT91C_TIMEOUT_WRDY);
}
return DATAFLASH_OK;
}
-
/*---------------------------------------------------------------------------*/
/* Function Name : AT91F_DataFlashRead */
/* Object : Read a block in dataflash */
/* Input Parameters : */
/* Return value : */
/*---------------------------------------------------------------------------*/
-int AT91F_DataFlashRead(
- AT91PS_DataFlash pDataFlash,
- unsigned long addr,
- unsigned long size,
- char *buffer)
+int AT91F_DataFlashRead(AT91PS_DataFlash pDataFlash,
+ unsigned long addr, unsigned long size, char *buffer)
{
unsigned long SizeToRead;
AT91F_SpiEnable(pDataFlash->pDevice->cs);
- if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc,
+ if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc,
AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
return -1;
while (size) {
- SizeToRead = (size < 0x8000)? size:0x8000;
+ SizeToRead = (size < 0x8000) ? size : 0x8000;
if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc,
- AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
+ AT91C_TIMEOUT_WRDY) !=
+ DATAFLASH_OK)
return -1;
- if (AT91F_DataFlashContinuousRead (pDataFlash, addr,
- (uchar *) buffer, SizeToRead) != DATAFLASH_OK)
+ if (AT91F_DataFlashContinuousRead(pDataFlash, addr,
+ (uchar *) buffer,
+ SizeToRead) != DATAFLASH_OK)
return -1;
size -= SizeToRead;
/* Input Parameters : */
/* Return value : Dataflash status register */
/*---------------------------------------------------------------------------*/
-int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) {
+int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc)
+{
AT91F_SpiEnable(cs);
AT91F_DataFlashGetStatus(pDesc);
- return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C);
+ return ((pDesc->command[1] == 0xFF) ? 0 : pDesc->command[1] & 0x3C);
}
#endif
#ifdef CONFIG_PCI_OHCI
static struct pci_device_id ohci_pci_ids[] = {
{0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */
+ {0x1033, 0x0035}, /* NEC PCI OHCI module ids */
/* Please add supported PCI OHCI controller ids here */
{0, 0}
};
#define CONFIG_CMD_USB /* USB Support */
#define CONFIG_CMD_VFD /* VFD support (TRAB) */
#define CONFIG_CMD_XIMG /* Load part of Multi Image */
-#define CONFIG_CMD_MUX /* AT91 MMC/SPI Mux Support */
+#define CONFIG_CMD_AT91_SPIMUX /* AT91 MMC/SPI Mux Support */
#endif /* _CONFIG_CMD_ALL_H */
#endif
#ifdef CONFIG_PCI
-#define CONFIG_CMD_CMD_PCI
+#define CONFIG_CMD_PCI
#endif
#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
"protect on FC000000 +${filesize}\0"
#endif
-#ifndef CONFIG_CAM5200
+#if defined(CONFIG_TQM5200)
#define CUSTOM_ENV_SETTINGS \
+ "hostname=tqm5200\0" \
"bootfile=/tftpboot/tqm5200/uImage\0" \
- "bootfile_fdt=/tftpboot/tqm5200/uImage_fdt\0" \
"fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \
"u-boot=/tftpboot/tqm5200/u-boot.bin\0"
-#else
+#elif defined(CONFIG_CAM5200)
#define CUSTOM_ENV_SETTINGS \
"bootfile=cam5200/uImage\0" \
"u-boot=cam5200/u-boot.bin\0" \
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
- "console=ttyS0\0" \
- "kernel_addr=200000\0" \
- "fdt_addr=400000\0" \
- "hostname=tqm5200\0" \
"netdev=eth0\0" \
+ "console=ttyPSC0\0" \
+ "fdt_addr=FC0A0000\0" \
+ "kernel_addr=FC0C0000\0" \
+ "ramdisk_addr=FC300000\0" \
+ "kernel_addr_r=200000\0" \
+ "fdt_addr_r=400000\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
":${hostname}:${netdev}:off panic=1\0" \
"addcons=setenv bootargs ${bootargs} " \
"console=${console},${baudrate}\0" \
- "flash_self=run ramargs addip addcons;" \
+ "flash_self_old=sete console ttyS0; run ramargs addip addcons;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "flash_nfs=run nfsargs addip addcons;" \
+ "flash_self=run ramargs addip addcons;" \
+ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "flash_nfs_old=sete console ttyS0; run nfsargs addip addcons;" \
"bootm ${kernel_addr}\0" \
- "net_nfs=tftp ${kernel_addr} ${bootfile};" \
- "run nfsargs addip addcons;bootm\0" \
- "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt};" \
- "tftp ${fdt_addr} ${fdt_file};setenv console ttyPSC0;" \
- "run nfsargs addip addcons;" \
+ "flash_nfs=run nfsargs addip addcons;" \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
+ "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
+ "sete console ttyS0; run nfsargs addip addcons;bootm\0" \
+ "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
+ "tftp ${fdt_addr_r} ${fdt_file}; " \
+ "run nfsargs addip addcons; " \
+ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
CUSTOM_ENV_SETTINGS \
"load=tftp 200000 ${u-boot}\0" \
ENV_UPDT \
# endif /* CFG_LOWBOOT */
# else /* !CONFIG_TQM5200_B */
# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \
- "1408k(kernel)," \
+ "128k(dtb)," \
+ "2304k(kernel)," \
"2m(initrd)," \
"4m(small-fs)," \
"8m(misc)," \
- "16m(big-fs)"
+ "15m(big-fs)"
# endif /* CONFIG_TQM5200_B */
#elif defined (CONFIG_CAM5200)
# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#define CONFIG_EXTRA_ENV_SETTINGS \
- CFG_BOOTFILE \
+ "bootfile="CFG_BOOTFILE_PATH"\0" \
"netdev=eth0\0" \
"consdev=ttyS0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
#endif
/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* Atmel: AT24C32A-10TQ-2.7 */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 32-Byte Page Write Mode */
+
+/*
* Ethernet configuration
*/
#define CONFIG_MPC512x_FEC 1
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_EEPROM
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\
- "flash_nfs=run nfsargs addip addtty;" \
+ "addmisc=setenv bootargs ${bootargs} rtc-pcf8563.probe=0,0x51\0"\
+ "flash_nfs=run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addtty;" \
+ "flash_self=run ramargs addip addtty addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
- "bootm\0" \
+ "net_nfs=tftp 200000 ${bootfile};" \
+ "run nfsargs addip addtty addmisc;bootm\0" \
"rootpath=/opt/eldk/ppc_4xxFP\0" \
"bootfile=/tftpboot/lwmon5/uImage\0" \
"kernel_addr=FC000000\0" \
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+#if 0
+/*
+ * ToDo: Watchdog is not test fully, so exclude it for now
+ */
#define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */
+#endif
/*
* For booting Linux, the board info and command line data
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO58 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-/* I2C */
+/*
+ * I2C
+ */
#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
-#if 0
-#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */
-#else
-/* I did the 'if 0' so we could keep the syntax above if ever needed. */
#undef CFG_I2C_NOPROBES
-#endif
#define CFG_I2C_OFFSET 0x3000
+/* I2C RTC */
+#define CONFIG_RTC_DS1337 /* This is really a DS1339 RTC */
+#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+
/* I2C EEPROM. AT24C32, we keep our environment in here.
*/
#define CFG_I2C_EEPROM_ADDR 0x51 /* 1010001x */
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SNTP
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Atmel Nordic AB <www.atmel.com>
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __LED_H
-#define __LED_H
-
-#ifndef __ASSEMBLY__
-extern void LED_init (void);
-extern void red_LED_on(void);
-extern void red_LED_off(void);
-extern void green_LED_on(void);
-extern void green_LED_off(void);
-extern void yellow_LED_on(void);
-extern void yellow_LED_off(void);
-#else
- .extern LED_init
- .extern red_LED_on
- .extern red_LED_off
- .extern yellow_LED_on
- .extern yellow_LED_off
- .extern green_LED_on
- .extern green_LED_off
-#endif
-#endif
# include <asm/status_led.h>
#endif
+/*
+ * Coloured LEDs API
+ */
+#ifndef __ASSEMBLY__
+extern void coloured_LED_init (void);
+extern void red_LED_on(void);
+extern void red_LED_off(void);
+extern void green_LED_on(void);
+extern void green_LED_off(void);
+extern void yellow_LED_on(void);
+extern void yellow_LED_off(void);
+#else
+ .extern LED_init
+ .extern red_LED_on
+ .extern red_LED_off
+ .extern yellow_LED_on
+ .extern yellow_LED_off
+ .extern green_LED_on
+ .extern green_LED_off
+#endif
+
#endif /* CONFIG_STATUS_LED */
#endif /* _STATUS_LED_H_ */
}
/************************************************************************
+ * Coloured LED functionality
+ ************************************************************************
+ * May be supplied by boards if desired
+ */
+void inline __coloured_LED_init (void) {}
+void inline coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init")));
+void inline __red_LED_on (void) {}
+void inline red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
+void inline __red_LED_off(void) {}
+void inline red_LED_off(void) __attribute__((weak, alias("__red_LED_off")));
+void inline __green_LED_on(void) {}
+void inline green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
+void inline __green_LED_off(void) {}
+void inline green_LED_off(void)__attribute__((weak, alias("__green_LED_off")));
+void inline __yellow_LED_on(void) {}
+void inline yellow_LED_on(void)__attribute__((weak, alias("__yellow_LED_on")));
+void inline __yellow_LED_off(void) {}
+void inline yellow_LED_off(void)__attribute__((weak, alias("__yellow_LED_off")));
+
+/************************************************************************
* Init Utilities *
************************************************************************
* Some of this code should be moved into the core functions,
}
#endif /* CFG_NO_FLASH */
-
/*
* Breathe some life into the board...
*
break;
#if defined(CONFIG_CMD_SNTP) && defined(CONFIG_BOOTP_TIMEOFFSET)
case 2: /* Time offset */
- NetCopyLong (&NetTimeOffset, (ulong *) (popt + 2));
+ NetCopyLong ((ulong *)&NetTimeOffset, (ulong *) (popt + 2));
NetTimeOffset = ntohl (NetTimeOffset);
break;
#endif
projects / platform / kernel / u-boot.git / commitdiff