pci_pci_problems |= PCIPCI_FAIL;
}
}
+
+static void __devinit quirk_nopciamd(struct pci_dev *dev)
+{
+ u8 rev;
+ pci_read_config_byte(dev, 0x08, &rev);
+ if (rev == 0x13) {
+ /* Erratum 24 */
+ printk(KERN_INFO "Chipset erratum: Disabling direct PCI/AGP transfers.\n");
+ pci_pci_problems |= PCIAGP_FAIL;
+ }
+}
+
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd );
/*
* Triton requires workarounds to be used by the drivers
* is currently marked NoFix
*
* We have multiple reports of hangs with this chipset that went away with
- * noapic specified. For the moment we assume its the errata. We may be wrong
+ * noapic specified. For the moment we assume it's the erratum. We may be wrong
* of course. However the advice is demonstrably good even if so..
*/
static void __devinit quirk_amd_ioapic(struct pci_dev *dev)
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
if (rev >= 0x02) {
- printk(KERN_WARNING "I/O APIC: AMD Errata #22 may be present. In the event of instability try\n");
+ printk(KERN_WARNING "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n");
printk(KERN_WARNING " : booting with the \"noapic\" option.\n");
}
}
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
extern int pci_pci_problems;
-#define PCIPCI_FAIL 1
+#define PCIPCI_FAIL 1 /* No PCI PCI DMA */
#define PCIPCI_TRITON 2
#define PCIPCI_NATOMA 4
#define PCIPCI_VIAETBF 8
#define PCIPCI_VSFX 16
-#define PCIPCI_ALIMAGIK 32
+#define PCIPCI_ALIMAGIK 32 /* Need low latency setting */
+#define PCIAGP_FAIL 64 /* No PCI to AGP DMA */
#endif /* __KERNEL__ */
#endif /* LINUX_PCI_H */