ddr: imx8m: helper: load ddr firmware according to binman symbols

By reading binman symbols, we no need hard coded IMEM_LEN/DMEM_LEN after
we update the binman dtsi to drop 0x8000/0x4000 length for the firmware.

And that could save binary size for many KBs.

Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8m[m,n,p]-venice
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
[Alper: Check BINMAN_SYMS_OK instead]
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

diff --git a/drivers/ddr/imx/phy/helper.c b/drivers/ddr/imx/phy/helper.c
index 60d650e..e9e0294 100644 (file)
--- a/drivers/ddr/imx/phy/helper.c
+++ b/drivers/ddr/imx/phy/helper.c
@@ -4,6 +4,7 @@
  */
 
 #include <common.h>
+#include <binman_sym.h>
 #include <log.h>
 #include <spl.h>
 #include <asm/global_data.h>
@@ -24,15 +25,30 @@ DECLARE_GLOBAL_DATA_PTR;
 #define DMEM_OFFSET_ADDR 0x00054000
 #define DDR_TRAIN_CODE_BASE_ADDR IP2APB_DDRPHY_IPS_BASE_ADDR(0)
 
+binman_sym_declare(ulong, ddr_1d_imem_fw, image_pos);
+binman_sym_declare(ulong, ddr_1d_imem_fw, size);
+
+binman_sym_declare(ulong, ddr_1d_dmem_fw, image_pos);
+binman_sym_declare(ulong, ddr_1d_dmem_fw, size);
+
+#if !IS_ENABLED(CONFIG_IMX8M_DDR3L)
+binman_sym_declare(ulong, ddr_2d_imem_fw, image_pos);
+binman_sym_declare(ulong, ddr_2d_imem_fw, size);
+
+binman_sym_declare(ulong, ddr_2d_dmem_fw, image_pos);
+binman_sym_declare(ulong, ddr_2d_dmem_fw, size);
+#endif
+
 /* We need PHY iMEM PHY is 32KB padded */
 void ddr_load_train_firmware(enum fw_type type)
 {
        u32 tmp32, i;
        u32 error = 0;
        unsigned long pr_to32, pr_from32;
-       unsigned long fw_offset = type ? IMEM_2D_OFFSET : 0;
+       uint32_t fw_offset = type ? IMEM_2D_OFFSET : 0;
        unsigned long imem_start = (unsigned long)&_end + fw_offset;
        unsigned long dmem_start;
+       unsigned long imem_len = IMEM_LEN, dmem_len = DMEM_LEN;
 
 #ifdef CONFIG_SPL_OF_CONTROL
        if (gd->fdt_blob && !fdt_check_header(gd->fdt_blob)) {
@@ -42,11 +58,30 @@ void ddr_load_train_firmware(enum fw_type type)
        }
 #endif
 
-       dmem_start = imem_start + IMEM_LEN;
+       dmem_start = imem_start + imem_len;
+
+       if (BINMAN_SYMS_OK) {
+               switch (type) {
+               case FW_1D_IMAGE:
+                       imem_start = binman_sym(ulong, ddr_1d_imem_fw, image_pos);
+                       imem_len = binman_sym(ulong, ddr_1d_imem_fw, size);
+                       dmem_start = binman_sym(ulong, ddr_1d_dmem_fw, image_pos);
+                       dmem_len = binman_sym(ulong, ddr_1d_dmem_fw, size);
+                       break;
+               case FW_2D_IMAGE:
+#if !IS_ENABLED(CONFIG_IMX8M_DDR3L)
+                       imem_start = binman_sym(ulong, ddr_2d_imem_fw, image_pos);
+                       imem_len = binman_sym(ulong, ddr_2d_imem_fw, size);
+                       dmem_start = binman_sym(ulong, ddr_2d_dmem_fw, image_pos);
+                       dmem_len = binman_sym(ulong, ddr_2d_dmem_fw, size);
+#endif
+                       break;
+               }
+       }
 
        pr_from32 = imem_start;
        pr_to32 = IMEM_OFFSET_ADDR;
-       for (i = 0x0; i < IMEM_LEN; ) {
+       for (i = 0x0; i < imem_len; ) {
                tmp32 = readl(pr_from32);
                writew(tmp32 & 0x0000ffff, DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32));
                pr_to32 += 1;
@@ -59,7 +94,7 @@ void ddr_load_train_firmware(enum fw_type type)
 
        pr_from32 = dmem_start;
        pr_to32 = DMEM_OFFSET_ADDR;
-       for (i = 0x0; i < DMEM_LEN; ) {
+       for (i = 0x0; i < dmem_len; ) {
                tmp32 = readl(pr_from32);
                writew(tmp32 & 0x0000ffff, DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32));
                pr_to32 += 1;
@@ -73,7 +108,7 @@ void ddr_load_train_firmware(enum fw_type type)
        debug("check ddr_pmu_train_imem code\n");
        pr_from32 = imem_start;
        pr_to32 = IMEM_OFFSET_ADDR;
-       for (i = 0x0; i < IMEM_LEN; ) {
+       for (i = 0x0; i < imem_len; ) {
                tmp32 = (readw(DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32)) & 0x0000ffff);
                pr_to32 += 1;
                tmp32 += ((readw(DDR_TRAIN_CODE_BASE_ADDR +
@@ -95,7 +130,7 @@ void ddr_load_train_firmware(enum fw_type type)
        debug("check ddr4_pmu_train_dmem code\n");
        pr_from32 = dmem_start;
        pr_to32 = DMEM_OFFSET_ADDR;
-       for (i = 0x0; i < DMEM_LEN;) {
+       for (i = 0x0; i < dmem_len;) {
                tmp32 = (readw(DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32)) & 0x0000ffff);
                pr_to32 += 1;
                tmp32 += ((readw(DDR_TRAIN_CODE_BASE_ADDR +