+++ /dev/null
-% texinfo.tex -- TeX macros to handle Texinfo files.
-%
-% Load plain if necessary, i.e., if running under initex.
-\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
-%
-\def\texinfoversion{2005-02-19.15}
-%
-% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software
-% Foundation, Inc.
-%
-% This texinfo.tex file is free software; you can redistribute it and/or
-% modify it under the terms of the GNU General Public License as
-% published by the Free Software Foundation; either version 2, or (at
-% your option) any later version.
-%
-% This texinfo.tex file is distributed in the hope that it will be
-% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-% General Public License for more details.
-%
-% You should have received a copy of the GNU General Public License
-% along with this texinfo.tex file; see the file COPYING. If not, write
-% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-% Boston, MA 02111-1307, USA.
-%
-% As a special exception, when this file is read by TeX when processing
-% a Texinfo source document, you may use the result without
-% restriction. (This has been our intent since Texinfo was invented.)
-%
-% Please try the latest version of texinfo.tex before submitting bug
-% reports; you can get the latest version from:
-% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
-% ftp://tug.org/tex/texinfo.tex
-% (and all CTAN mirrors, see http://www.ctan.org).
-% The texinfo.tex in any given distribution could well be out
-% of date, so if that's what you're using, please check.
-%
-% Send bug reports to bug-texinfo@gnu.org. Please include including a
-% complete document in each bug report with which we can reproduce the
-% problem. Patches are, of course, greatly appreciated.
-%
-% To process a Texinfo manual with TeX, it's most reliable to use the
-% texi2dvi shell script that comes with the distribution. For a simple
-% manual foo.texi, however, you can get away with this:
-% tex foo.texi
-% texindex foo.??
-% tex foo.texi
-% tex foo.texi
-% dvips foo.dvi -o # or whatever; this makes foo.ps.
-% The extra TeX runs get the cross-reference information correct.
-% Sometimes one run after texindex suffices, and sometimes you need more
-% than two; texi2dvi does it as many times as necessary.
-%
-% It is possible to adapt texinfo.tex for other languages, to some
-% extent. You can get the existing language-specific files from the
-% full Texinfo distribution.
-%
-% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
-
-
-\message{Loading texinfo [version \texinfoversion]:}
-
-% If in a .fmt file, print the version number
-% and turn on active characters that we couldn't do earlier because
-% they might have appeared in the input file name.
-\everyjob{\message{[Texinfo version \texinfoversion]}%
- \catcode`+=\active \catcode`\_=\active}
-
-\message{Basics,}
-\chardef\other=12
-
-% We never want plain's \outer definition of \+ in Texinfo.
-% For @tex, we can use \tabalign.
-\let\+ = \relax
-
-% Save some plain tex macros whose names we will redefine.
-\let\ptexb=\b
-\let\ptexbullet=\bullet
-\let\ptexc=\c
-\let\ptexcomma=\,
-\let\ptexdot=\.
-\let\ptexdots=\dots
-\let\ptexend=\end
-\let\ptexequiv=\equiv
-\let\ptexexclam=\!
-\let\ptexfootnote=\footnote
-\let\ptexgtr=>
-\let\ptexhat=^
-\let\ptexi=\i
-\let\ptexindent=\indent
-\let\ptexinsert=\insert
-\let\ptexlbrace=\{
-\let\ptexless=<
-\let\ptexnewwrite\newwrite
-\let\ptexnoindent=\noindent
-\let\ptexplus=+
-\let\ptexrbrace=\}
-\let\ptexslash=\/
-\let\ptexstar=\*
-\let\ptext=\t
-
-% If this character appears in an error message or help string, it
-% starts a new line in the output.
-\newlinechar = `^^J
-
-% Use TeX 3.0's \inputlineno to get the line number, for better error
-% messages, but if we're using an old version of TeX, don't do anything.
-%
-\ifx\inputlineno\thisisundefined
- \let\linenumber = \empty % Pre-3.0.
-\else
- \def\linenumber{l.\the\inputlineno:\space}
-\fi
-
-% Set up fixed words for English if not already set.
-\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
-\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
-\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
-\ifx\putwordin\undefined \gdef\putwordin{in}\fi
-\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
-\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
-\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
-\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
-\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
-\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
-\ifx\putwordof\undefined \gdef\putwordof{of}\fi
-\ifx\putwordon\undefined \gdef\putwordon{on}\fi
-\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
-\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
-\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
-\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
-\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
-\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
-\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
-%
-\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
-\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
-\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
-\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
-\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
-\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
-\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
-\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
-\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
-\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
-\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
-\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
-%
-\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
-\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
-\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
-\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
-\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
-
-% In some macros, we cannot use the `\? notation---the left quote is
-% in some cases the escape char.
-\chardef\backChar = `\\
-\chardef\colonChar = `\:
-\chardef\commaChar = `\,
-\chardef\dotChar = `\.
-\chardef\exclamChar= `\!
-\chardef\plusChar = `\+
-\chardef\questChar = `\?
-\chardef\semiChar = `\;
-\chardef\underChar = `\_
-
-\chardef\spaceChar = `\ %
-\chardef\spacecat = 10
-\def\spaceisspace{\catcode\spaceChar=\spacecat}
-
-{% for help with debugging.
- % example usage: \expandafter\show\activebackslash
- \catcode`\! = 0 \catcode`\\ = \active
- !global!def!activebackslash{\}
-}
-
-% Ignore a token.
-%
-\def\gobble#1{}
-
-% The following is used inside several \edef's.
-\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
-
-% Hyphenation fixes.
-\hyphenation{
- Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
- ap-pen-dix bit-map bit-maps
- data-base data-bases eshell fall-ing half-way long-est man-u-script
- man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
- par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
- spell-ing spell-ings
- stand-alone strong-est time-stamp time-stamps which-ever white-space
- wide-spread wrap-around
-}
-
-% Margin to add to right of even pages, to left of odd pages.
-\newdimen\bindingoffset
-\newdimen\normaloffset
-\newdimen\pagewidth \newdimen\pageheight
-
-% For a final copy, take out the rectangles
-% that mark overfull boxes (in case you have decided
-% that the text looks ok even though it passes the margin).
-%
-\def\finalout{\overfullrule=0pt}
-
-% @| inserts a changebar to the left of the current line. It should
-% surround any changed text. This approach does *not* work if the
-% change spans more than two lines of output. To handle that, we would
-% have adopt a much more difficult approach (putting marks into the main
-% vertical list for the beginning and end of each change).
-%
-\def\|{%
- % \vadjust can only be used in horizontal mode.
- \leavevmode
- %
- % Append this vertical mode material after the current line in the output.
- \vadjust{%
- % We want to insert a rule with the height and depth of the current
- % leading; that is exactly what \strutbox is supposed to record.
- \vskip-\baselineskip
- %
- % \vadjust-items are inserted at the left edge of the type. So
- % the \llap here moves out into the left-hand margin.
- \llap{%
- %
- % For a thicker or thinner bar, change the `1pt'.
- \vrule height\baselineskip width1pt
- %
- % This is the space between the bar and the text.
- \hskip 12pt
- }%
- }%
-}
-
-% Sometimes it is convenient to have everything in the transcript file
-% and nothing on the terminal. We don't just call \tracingall here,
-% since that produces some useless output on the terminal. We also make
-% some effort to order the tracing commands to reduce output in the log
-% file; cf. trace.sty in LaTeX.
-%
-\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
-\def\loggingall{%
- \tracingstats2
- \tracingpages1
- \tracinglostchars2 % 2 gives us more in etex
- \tracingparagraphs1
- \tracingoutput1
- \tracingmacros2
- \tracingrestores1
- \showboxbreadth\maxdimen \showboxdepth\maxdimen
- \ifx\eTeXversion\undefined\else % etex gives us more logging
- \tracingscantokens1
- \tracingifs1
- \tracinggroups1
- \tracingnesting2
- \tracingassigns1
- \fi
- \tracingcommands3 % 3 gives us more in etex
- \errorcontextlines16
-}%
-
-% add check for \lastpenalty to plain's definitions. If the last thing
-% we did was a \nobreak, we don't want to insert more space.
-%
-\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
- \removelastskip\penalty-50\smallskip\fi\fi}
-\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
- \removelastskip\penalty-100\medskip\fi\fi}
-\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
- \removelastskip\penalty-200\bigskip\fi\fi}
-
-% For @cropmarks command.
-% Do @cropmarks to get crop marks.
-%
-\newif\ifcropmarks
-\let\cropmarks = \cropmarkstrue
-%
-% Dimensions to add cropmarks at corners.
-% Added by P. A. MacKay, 12 Nov. 1986
-%
-\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
-\newdimen\cornerlong \cornerlong=1pc
-\newdimen\cornerthick \cornerthick=.3pt
-\newdimen\topandbottommargin \topandbottommargin=.75in
-
-% Main output routine.
-\chardef\PAGE = 255
-\output = {\onepageout{\pagecontents\PAGE}}
-
-\newbox\headlinebox
-\newbox\footlinebox
-
-% \onepageout takes a vbox as an argument. Note that \pagecontents
-% does insertions, but you have to call it yourself.
-\def\onepageout#1{%
- \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
- %
- \ifodd\pageno \advance\hoffset by \bindingoffset
- \else \advance\hoffset by -\bindingoffset\fi
- %
- % Do this outside of the \shipout so @code etc. will be expanded in
- % the headline as they should be, not taken literally (outputting ''code).
- \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
- \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
- %
- {%
- % Have to do this stuff outside the \shipout because we want it to
- % take effect in \write's, yet the group defined by the \vbox ends
- % before the \shipout runs.
- %
- \escapechar = `\\ % use backslash in output files.
- \indexdummies % don't expand commands in the output.
- \normalturnoffactive % \ in index entries must not stay \, e.g., if
- % the page break happens to be in the middle of an example.
- \shipout\vbox{%
- % Do this early so pdf references go to the beginning of the page.
- \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
- %
- \ifcropmarks \vbox to \outervsize\bgroup
- \hsize = \outerhsize
- \vskip-\topandbottommargin
- \vtop to0pt{%
- \line{\ewtop\hfil\ewtop}%
- \nointerlineskip
- \line{%
- \vbox{\moveleft\cornerthick\nstop}%
- \hfill
- \vbox{\moveright\cornerthick\nstop}%
- }%
- \vss}%
- \vskip\topandbottommargin
- \line\bgroup
- \hfil % center the page within the outer (page) hsize.
- \ifodd\pageno\hskip\bindingoffset\fi
- \vbox\bgroup
- \fi
- %
- \unvbox\headlinebox
- \pagebody{#1}%
- \ifdim\ht\footlinebox > 0pt
- % Only leave this space if the footline is nonempty.
- % (We lessened \vsize for it in \oddfootingxxx.)
- % The \baselineskip=24pt in plain's \makefootline has no effect.
- \vskip 2\baselineskip
- \unvbox\footlinebox
- \fi
- %
- \ifcropmarks
- \egroup % end of \vbox\bgroup
- \hfil\egroup % end of (centering) \line\bgroup
- \vskip\topandbottommargin plus1fill minus1fill
- \boxmaxdepth = \cornerthick
- \vbox to0pt{\vss
- \line{%
- \vbox{\moveleft\cornerthick\nsbot}%
- \hfill
- \vbox{\moveright\cornerthick\nsbot}%
- }%
- \nointerlineskip
- \line{\ewbot\hfil\ewbot}%
- }%
- \egroup % \vbox from first cropmarks clause
- \fi
- }% end of \shipout\vbox
- }% end of group with \normalturnoffactive
- \advancepageno
- \ifnum\outputpenalty>-20000 \else\dosupereject\fi
-}
-
-\newinsert\margin \dimen\margin=\maxdimen
-
-\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
-{\catcode`\@ =11
-\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
-% marginal hacks, juha@viisa.uucp (Juha Takala)
-\ifvoid\margin\else % marginal info is present
- \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
-\dimen@=\dp#1 \unvbox#1
-\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
-\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
-}
-
-% Here are the rules for the cropmarks. Note that they are
-% offset so that the space between them is truly \outerhsize or \outervsize
-% (P. A. MacKay, 12 November, 1986)
-%
-\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
-\def\nstop{\vbox
- {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
-\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
-\def\nsbot{\vbox
- {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
-
-% Parse an argument, then pass it to #1. The argument is the rest of
-% the input line (except we remove a trailing comment). #1 should be a
-% macro which expects an ordinary undelimited TeX argument.
-%
-\def\parsearg{\parseargusing{}}
-\def\parseargusing#1#2{%
- \def\next{#2}%
- \begingroup
- \obeylines
- \spaceisspace
- #1%
- \parseargline\empty% Insert the \empty token, see \finishparsearg below.
-}
-
-{\obeylines %
- \gdef\parseargline#1^^M{%
- \endgroup % End of the group started in \parsearg.
- \argremovecomment #1\comment\ArgTerm%
- }%
-}
-
-% First remove any @comment, then any @c comment.
-\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
-\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
-
-% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
-%
-% \argremovec might leave us with trailing space, e.g.,
-% @end itemize @c foo
-% This space token undergoes the same procedure and is eventually removed
-% by \finishparsearg.
-%
-\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
-\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
-\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
- \def\temp{#3}%
- \ifx\temp\empty
- % We cannot use \next here, as it holds the macro to run;
- % thus we reuse \temp.
- \let\temp\finishparsearg
- \else
- \let\temp\argcheckspaces
- \fi
- % Put the space token in:
- \temp#1 #3\ArgTerm
-}
-
-% If a _delimited_ argument is enclosed in braces, they get stripped; so
-% to get _exactly_ the rest of the line, we had to prevent such situation.
-% We prepended an \empty token at the very beginning and we expand it now,
-% just before passing the control to \next.
-% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
-% either the null string, or it ends with \^^M---thus there is no danger
-% that a pair of braces would be stripped.
-%
-% But first, we have to remove the trailing space token.
-%
-\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}}
-
-% \parseargdef\foo{...}
-% is roughly equivalent to
-% \def\foo{\parsearg\Xfoo}
-% \def\Xfoo#1{...}
-%
-% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
-% favourite TeX trick. --kasal, 16nov03
-
-\def\parseargdef#1{%
- \expandafter \doparseargdef \csname\string#1\endcsname #1%
-}
-\def\doparseargdef#1#2{%
- \def#2{\parsearg#1}%
- \def#1##1%
-}
-
-% Several utility definitions with active space:
-{
- \obeyspaces
- \gdef\obeyedspace{ }
-
- % Make each space character in the input produce a normal interword
- % space in the output. Don't allow a line break at this space, as this
- % is used only in environments like @example, where each line of input
- % should produce a line of output anyway.
- %
- \gdef\sepspaces{\obeyspaces\let =\tie}
-
- % If an index command is used in an @example environment, any spaces
- % therein should become regular spaces in the raw index file, not the
- % expansion of \tie (\leavevmode \penalty \@M \ ).
- \gdef\unsepspaces{\let =\space}
-}
-
-
-\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
-
-% Define the framework for environments in texinfo.tex. It's used like this:
-%
-% \envdef\foo{...}
-% \def\Efoo{...}
-%
-% It's the responsibility of \envdef to insert \begingroup before the
-% actual body; @end closes the group after calling \Efoo. \envdef also
-% defines \thisenv, so the current environment is known; @end checks
-% whether the environment name matches. The \checkenv macro can also be
-% used to check whether the current environment is the one expected.
-%
-% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
-% are not treated as enviroments; they don't open a group. (The
-% implementation of @end takes care not to call \endgroup in this
-% special case.)
-
-
-% At runtime, environments start with this:
-\def\startenvironment#1{\begingroup\def\thisenv{#1}}
-% initialize
-\let\thisenv\empty
-
-% ... but they get defined via ``\envdef\foo{...}'':
-\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
-\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
-
-% Check whether we're in the right environment:
-\def\checkenv#1{%
- \def\temp{#1}%
- \ifx\thisenv\temp
- \else
- \badenverr
- \fi
-}
-
-% Evironment mismatch, #1 expected:
-\def\badenverr{%
- \errhelp = \EMsimple
- \errmessage{This command can appear only \inenvironment\temp,
- not \inenvironment\thisenv}%
-}
-\def\inenvironment#1{%
- \ifx#1\empty
- out of any environment%
- \else
- in environment \expandafter\string#1%
- \fi
-}
-
-% @end foo executes the definition of \Efoo.
-% But first, it executes a specialized version of \checkenv
-%
-\parseargdef\end{%
- \if 1\csname iscond.#1\endcsname
- \else
- % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03
- \expandafter\checkenv\csname#1\endcsname
- \csname E#1\endcsname
- \endgroup
- \fi
-}
-
-\newhelp\EMsimple{Press RETURN to continue.}
-
-
-%% Simple single-character @ commands
-
-% @@ prints an @
-% Kludge this until the fonts are right (grr).
-\def\@{{\tt\char64}}
-
-% This is turned off because it was never documented
-% and you can use @w{...} around a quote to suppress ligatures.
-%% Define @` and @' to be the same as ` and '
-%% but suppressing ligatures.
-%\def\`{{`}}
-%\def\'{{'}}
-
-% Used to generate quoted braces.
-\def\mylbrace {{\tt\char123}}
-\def\myrbrace {{\tt\char125}}
-\let\{=\mylbrace
-\let\}=\myrbrace
-\begingroup
- % Definitions to produce \{ and \} commands for indices,
- % and @{ and @} for the aux/toc files.
- \catcode`\{ = \other \catcode`\} = \other
- \catcode`\[ = 1 \catcode`\] = 2
- \catcode`\! = 0 \catcode`\\ = \other
- !gdef!lbracecmd[\{]%
- !gdef!rbracecmd[\}]%
- !gdef!lbraceatcmd[@{]%
- !gdef!rbraceatcmd[@}]%
-!endgroup
-
-% @comma{} to avoid , parsing problems.
-\let\comma = ,
-
-% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
-% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
-\let\, = \c
-\let\dotaccent = \.
-\def\ringaccent#1{{\accent23 #1}}
-\let\tieaccent = \t
-\let\ubaraccent = \b
-\let\udotaccent = \d
-
-% Other special characters: @questiondown @exclamdown @ordf @ordm
-% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
-\def\questiondown{?`}
-\def\exclamdown{!`}
-\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
-\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
-
-% Dotless i and dotless j, used for accents.
-\def\imacro{i}
-\def\jmacro{j}
-\def\dotless#1{%
- \def\temp{#1}%
- \ifx\temp\imacro \ptexi
- \else\ifx\temp\jmacro \j
- \else \errmessage{@dotless can be used only with i or j}%
- \fi\fi
-}
-
-% The \TeX{} logo, as in plain, but resetting the spacing so that a
-% period following counts as ending a sentence. (Idea found in latex.)
-%
-\edef\TeX{\TeX \spacefactor=1000 }
-
-% @LaTeX{} logo. Not quite the same results as the definition in
-% latex.ltx, since we use a different font for the raised A; it's most
-% convenient for us to use an explicitly smaller font, rather than using
-% the \scriptstyle font (since we don't reset \scriptstyle and
-% \scriptscriptstyle).
-%
-\def\LaTeX{%
- L\kern-.36em
- {\setbox0=\hbox{T}%
- \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}%
- \kern-.15em
- \TeX
-}
-
-% Be sure we're in horizontal mode when doing a tie, since we make space
-% equivalent to this in @example-like environments. Otherwise, a space
-% at the beginning of a line will start with \penalty -- and
-% since \penalty is valid in vertical mode, we'd end up putting the
-% penalty on the vertical list instead of in the new paragraph.
-{\catcode`@ = 11
- % Avoid using \@M directly, because that causes trouble
- % if the definition is written into an index file.
- \global\let\tiepenalty = \@M
- \gdef\tie{\leavevmode\penalty\tiepenalty\ }
-}
-
-% @: forces normal size whitespace following.
-\def\:{\spacefactor=1000 }
-
-% @* forces a line break.
-\def\*{\hfil\break\hbox{}\ignorespaces}
-
-% @/ allows a line break.
-\let\/=\allowbreak
-
-% @. is an end-of-sentence period.
-\def\.{.\spacefactor=\endofsentencespacefactor}
-
-% @! is an end-of-sentence bang.
-\def\!{!\spacefactor=\endofsentencespacefactor}
-
-% @? is an end-of-sentence query.
-\def\?{?\spacefactor=\endofsentencespacefactor}
-
-% @frenchspacing on|off says whether to put extra space after punctuation.
-%
-\def\onword{on}
-\def\offword{off}
-%
-\parseargdef\frenchspacing{%
- \def\temp{#1}%
- \ifx\temp\onword \plainfrenchspacing
- \else\ifx\temp\offword \plainnonfrenchspacing
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @frenchspacing option `\temp', must be on/off}%
- \fi\fi
-}
-
-% @w prevents a word break. Without the \leavevmode, @w at the
-% beginning of a paragraph, when TeX is still in vertical mode, would
-% produce a whole line of output instead of starting the paragraph.
-\def\w#1{\leavevmode\hbox{#1}}
-
-% @group ... @end group forces ... to be all on one page, by enclosing
-% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
-% to keep its height that of a normal line. According to the rules for
-% \topskip (p.114 of the TeXbook), the glue inserted is
-% max (\topskip - \ht (first item), 0). If that height is large,
-% therefore, no glue is inserted, and the space between the headline and
-% the text is small, which looks bad.
-%
-% Another complication is that the group might be very large. This can
-% cause the glue on the previous page to be unduly stretched, because it
-% does not have much material. In this case, it's better to add an
-% explicit \vfill so that the extra space is at the bottom. The
-% threshold for doing this is if the group is more than \vfilllimit
-% percent of a page (\vfilllimit can be changed inside of @tex).
-%
-\newbox\groupbox
-\def\vfilllimit{0.7}
-%
-\envdef\group{%
- \ifnum\catcode`\^^M=\active \else
- \errhelp = \groupinvalidhelp
- \errmessage{@group invalid in context where filling is enabled}%
- \fi
- \startsavinginserts
- %
- \setbox\groupbox = \vtop\bgroup
- % Do @comment since we are called inside an environment such as
- % @example, where each end-of-line in the input causes an
- % end-of-line in the output. We don't want the end-of-line after
- % the `@group' to put extra space in the output. Since @group
- % should appear on a line by itself (according to the Texinfo
- % manual), we don't worry about eating any user text.
- \comment
-}
-%
-% The \vtop produces a box with normal height and large depth; thus, TeX puts
-% \baselineskip glue before it, and (when the next line of text is done)
-% \lineskip glue after it. Thus, space below is not quite equal to space
-% above. But it's pretty close.
-\def\Egroup{%
- % To get correct interline space between the last line of the group
- % and the first line afterwards, we have to propagate \prevdepth.
- \endgraf % Not \par, as it may have been set to \lisppar.
- \global\dimen1 = \prevdepth
- \egroup % End the \vtop.
- % \dimen0 is the vertical size of the group's box.
- \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
- % \dimen2 is how much space is left on the page (more or less).
- \dimen2 = \pageheight \advance\dimen2 by -\pagetotal
- % if the group doesn't fit on the current page, and it's a big big
- % group, force a page break.
- \ifdim \dimen0 > \dimen2
- \ifdim \pagetotal < \vfilllimit\pageheight
- \page
- \fi
- \fi
- \box\groupbox
- \prevdepth = \dimen1
- \checkinserts
-}
-%
-% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
-% message, so this ends up printing `@group can only ...'.
-%
-\newhelp\groupinvalidhelp{%
-group can only be used in environments such as @example,^^J%
-where each line of input produces a line of output.}
-
-% @need space-in-mils
-% forces a page break if there is not space-in-mils remaining.
-
-\newdimen\mil \mil=0.001in
-
-% Old definition--didn't work.
-%\parseargdef\need{\par %
-%% This method tries to make TeX break the page naturally
-%% if the depth of the box does not fit.
-%{\baselineskip=0pt%
-%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
-%\prevdepth=-1000pt
-%}}
-
-\parseargdef\need{%
- % Ensure vertical mode, so we don't make a big box in the middle of a
- % paragraph.
- \par
- %
- % If the @need value is less than one line space, it's useless.
- \dimen0 = #1\mil
- \dimen2 = \ht\strutbox
- \advance\dimen2 by \dp\strutbox
- \ifdim\dimen0 > \dimen2
- %
- % Do a \strut just to make the height of this box be normal, so the
- % normal leading is inserted relative to the preceding line.
- % And a page break here is fine.
- \vtop to #1\mil{\strut\vfil}%
- %
- % TeX does not even consider page breaks if a penalty added to the
- % main vertical list is 10000 or more. But in order to see if the
- % empty box we just added fits on the page, we must make it consider
- % page breaks. On the other hand, we don't want to actually break the
- % page after the empty box. So we use a penalty of 9999.
- %
- % There is an extremely small chance that TeX will actually break the
- % page at this \penalty, if there are no other feasible breakpoints in
- % sight. (If the user is using lots of big @group commands, which
- % almost-but-not-quite fill up a page, TeX will have a hard time doing
- % good page breaking, for example.) However, I could not construct an
- % example where a page broke at this \penalty; if it happens in a real
- % document, then we can reconsider our strategy.
- \penalty9999
- %
- % Back up by the size of the box, whether we did a page break or not.
- \kern -#1\mil
- %
- % Do not allow a page break right after this kern.
- \nobreak
- \fi
-}
-
-% @br forces paragraph break (and is undocumented).
-
-\let\br = \par
-
-% @page forces the start of a new page.
-%
-\def\page{\par\vfill\supereject}
-
-% @exdent text....
-% outputs text on separate line in roman font, starting at standard page margin
-
-% This records the amount of indent in the innermost environment.
-% That's how much \exdent should take out.
-\newskip\exdentamount
-
-% This defn is used inside fill environments such as @defun.
-\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
-
-% This defn is used inside nofill environments such as @example.
-\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
- \leftline{\hskip\leftskip{\rm#1}}}}
-
-% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
-% paragraph. For more general purposes, use the \margin insertion
-% class. WHICH is `l' or `r'.
-%
-\newskip\inmarginspacing \inmarginspacing=1cm
-\def\strutdepth{\dp\strutbox}
-%
-\def\doinmargin#1#2{\strut\vadjust{%
- \nobreak
- \kern-\strutdepth
- \vtop to \strutdepth{%
- \baselineskip=\strutdepth
- \vss
- % if you have multiple lines of stuff to put here, you'll need to
- % make the vbox yourself of the appropriate size.
- \ifx#1l%
- \llap{\ignorespaces #2\hskip\inmarginspacing}%
- \else
- \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
- \fi
- \null
- }%
-}}
-\def\inleftmargin{\doinmargin l}
-\def\inrightmargin{\doinmargin r}
-%
-% @inmargin{TEXT [, RIGHT-TEXT]}
-% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
-% else use TEXT for both).
-%
-\def\inmargin#1{\parseinmargin #1,,\finish}
-\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \def\lefttext{#1}% have both texts
- \def\righttext{#2}%
- \else
- \def\lefttext{#1}% have only one text
- \def\righttext{#1}%
- \fi
- %
- \ifodd\pageno
- \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
- \else
- \def\temp{\inleftmargin\lefttext}%
- \fi
- \temp
-}
-
-% @include file insert text of that file as input.
-%
-\def\include{\parseargusing\filenamecatcodes\includezzz}
-\def\includezzz#1{%
- \pushthisfilestack
- \def\thisfile{#1}%
- {%
- \makevalueexpandable
- \def\temp{\input #1 }%
- \expandafter
- }\temp
- \popthisfilestack
-}
-\def\filenamecatcodes{%
- \catcode`\\=\other
- \catcode`~=\other
- \catcode`^=\other
- \catcode`_=\other
- \catcode`|=\other
- \catcode`<=\other
- \catcode`>=\other
- \catcode`+=\other
- \catcode`-=\other
-}
-
-\def\pushthisfilestack{%
- \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
-}
-\def\pushthisfilestackX{%
- \expandafter\pushthisfilestackY\thisfile\StackTerm
-}
-\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
- \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
-}
-
-\def\popthisfilestack{\errthisfilestackempty}
-\def\errthisfilestackempty{\errmessage{Internal error:
- the stack of filenames is empty.}}
-
-\def\thisfile{}
-
-% @center line
-% outputs that line, centered.
-%
-\parseargdef\center{%
- \ifhmode
- \let\next\centerH
- \else
- \let\next\centerV
- \fi
- \next{\hfil \ignorespaces#1\unskip \hfil}%
-}
-\def\centerH#1{%
- {%
- \hfil\break
- \advance\hsize by -\leftskip
- \advance\hsize by -\rightskip
- \line{#1}%
- \break
- }%
-}
-\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
-
-% @sp n outputs n lines of vertical space
-
-\parseargdef\sp{\vskip #1\baselineskip}
-
-% @comment ...line which is ignored...
-% @c is the same as @comment
-% @ignore ... @end ignore is another way to write a comment
-
-\def\comment{\begingroup \catcode`\^^M=\other%
-\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
-\commentxxx}
-{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-
-\let\c=\comment
-
-% @paragraphindent NCHARS
-% We'll use ems for NCHARS, close enough.
-% NCHARS can also be the word `asis' or `none'.
-% We cannot feasibly implement @paragraphindent asis, though.
-%
-\def\asisword{asis} % no translation, these are keywords
-\def\noneword{none}
-%
-\parseargdef\paragraphindent{%
- \def\temp{#1}%
- \ifx\temp\asisword
- \else
- \ifx\temp\noneword
- \defaultparindent = 0pt
- \else
- \defaultparindent = #1em
- \fi
- \fi
- \parindent = \defaultparindent
-}
-
-% @exampleindent NCHARS
-% We'll use ems for NCHARS like @paragraphindent.
-% It seems @exampleindent asis isn't necessary, but
-% I preserve it to make it similar to @paragraphindent.
-\parseargdef\exampleindent{%
- \def\temp{#1}%
- \ifx\temp\asisword
- \else
- \ifx\temp\noneword
- \lispnarrowing = 0pt
- \else
- \lispnarrowing = #1em
- \fi
- \fi
-}
-
-% @firstparagraphindent WORD
-% If WORD is `none', then suppress indentation of the first paragraph
-% after a section heading. If WORD is `insert', then do indent at such
-% paragraphs.
-%
-% The paragraph indentation is suppressed or not by calling
-% \suppressfirstparagraphindent, which the sectioning commands do.
-% We switch the definition of this back and forth according to WORD.
-% By default, we suppress indentation.
-%
-\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
-\def\insertword{insert}
-%
-\parseargdef\firstparagraphindent{%
- \def\temp{#1}%
- \ifx\temp\noneword
- \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
- \else\ifx\temp\insertword
- \let\suppressfirstparagraphindent = \relax
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @firstparagraphindent option `\temp'}%
- \fi\fi
-}
-
-% Here is how we actually suppress indentation. Redefine \everypar to
-% \kern backwards by \parindent, and then reset itself to empty.
-%
-% We also make \indent itself not actually do anything until the next
-% paragraph.
-%
-\gdef\dosuppressfirstparagraphindent{%
- \gdef\indent{%
- \restorefirstparagraphindent
- \indent
- }%
- \gdef\noindent{%
- \restorefirstparagraphindent
- \noindent
- }%
- \global\everypar = {%
- \kern -\parindent
- \restorefirstparagraphindent
- }%
-}
-
-\gdef\restorefirstparagraphindent{%
- \global \let \indent = \ptexindent
- \global \let \noindent = \ptexnoindent
- \global \everypar = {}%
-}
-
-
-% @asis just yields its argument. Used with @table, for example.
-%
-\def\asis#1{#1}
-
-% @math outputs its argument in math mode.
-%
-% One complication: _ usually means subscripts, but it could also mean
-% an actual _ character, as in @math{@var{some_variable} + 1}. So make
-% _ active, and distinguish by seeing if the current family is \slfam,
-% which is what @var uses.
-{
- \catcode\underChar = \active
- \gdef\mathunderscore{%
- \catcode\underChar=\active
- \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
- }
-}
-% Another complication: we want \\ (and @\) to output a \ character.
-% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
-% this is not advertised and we don't care. Texinfo does not
-% otherwise define @\.
-%
-% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
-\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
-%
-\def\math{%
- \tex
- \mathunderscore
- \let\\ = \mathbackslash
- \mathactive
- $\finishmath
-}
-\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex.
-
-% Some active characters (such as <) are spaced differently in math.
-% We have to reset their definitions in case the @math was an argument
-% to a command which sets the catcodes (such as @item or @section).
-%
-{
- \catcode`^ = \active
- \catcode`< = \active
- \catcode`> = \active
- \catcode`+ = \active
- \gdef\mathactive{%
- \let^ = \ptexhat
- \let< = \ptexless
- \let> = \ptexgtr
- \let+ = \ptexplus
- }
-}
-
-% @bullet and @minus need the same treatment as @math, just above.
-\def\bullet{$\ptexbullet$}
-\def\minus{$-$}
-
-% @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
-%
-\def\dots{%
- \leavevmode
- \hbox to 1.5em{%
- \hskip 0pt plus 0.25fil
- .\hfil.\hfil.%
- \hskip 0pt plus 0.5fil
- }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
- \dots
- \spacefactor=\endofsentencespacefactor
-}
-
-% @comma{} is so commas can be inserted into text without messing up
-% Texinfo's parsing.
-%
-\let\comma = ,
-
-% @refill is a no-op.
-\let\refill=\relax
-
-% If working on a large document in chapters, it is convenient to
-% be able to disable indexing, cross-referencing, and contents, for test runs.
-% This is done with @novalidate (before @setfilename).
-%
-\newif\iflinks \linkstrue % by default we want the aux files.
-\let\novalidate = \linksfalse
-
-% @setfilename is done at the beginning of every texinfo file.
-% So open here the files we need to have open while reading the input.
-% This makes it possible to make a .fmt file for texinfo.
-\def\setfilename{%
- \fixbackslash % Turn off hack to swallow `\input texinfo'.
- \iflinks
- \tryauxfile
- % Open the new aux file. TeX will close it automatically at exit.
- \immediate\openout\auxfile=\jobname.aux
- \fi % \openindices needs to do some work in any case.
- \openindices
- \let\setfilename=\comment % Ignore extra @setfilename cmds.
- %
- % If texinfo.cnf is present on the system, read it.
- % Useful for site-wide @afourpaper, etc.
- \openin 1 texinfo.cnf
- \ifeof 1 \else \input texinfo.cnf \fi
- \closein 1
- %
- \comment % Ignore the actual filename.
-}
-
-% Called from \setfilename.
-%
-\def\openindices{%
- \newindex{cp}%
- \newcodeindex{fn}%
- \newcodeindex{vr}%
- \newcodeindex{tp}%
- \newcodeindex{ky}%
- \newcodeindex{pg}%
-}
-
-% @bye.
-\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-
-
-\message{pdf,}
-% adobe `portable' document format
-\newcount\tempnum
-\newcount\lnkcount
-\newtoks\filename
-\newcount\filenamelength
-\newcount\pgn
-\newtoks\toksA
-\newtoks\toksB
-\newtoks\toksC
-\newtoks\toksD
-\newbox\boxA
-\newcount\countA
-\newif\ifpdf
-\newif\ifpdfmakepagedest
-
-% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
-% can be set). So we test for \relax and 0 as well as \undefined,
-% borrowed from ifpdf.sty.
-\ifx\pdfoutput\undefined
-\else
- \ifx\pdfoutput\relax
- \else
- \ifcase\pdfoutput
- \else
- \pdftrue
- \fi
- \fi
-\fi
-
-% PDF uses PostScript string constants for the names of xref targets, to
-% for display in the outlines, and in other places. Thus, we have to
-% double any backslashes. Otherwise, a name like "\node" will be
-% interpreted as a newline (\n), followed by o, d, e. Not good.
-% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
-% (and related messages, the final outcome is that it is up to the TeX
-% user to double the backslashes and otherwise make the string valid, so
-% that's we do).
-
-% double active backslashes.
-%
-{\catcode`\@=0 \catcode`\\=\active
- @gdef@activebackslash{@catcode`@\=@active @otherbackslash}
- @gdef@activebackslashdouble{%
- @catcode@backChar=@active
- @let\=@doublebackslash}
-}
-
-% To handle parens, we must adopt a different approach, since parens are
-% not active characters. hyperref.dtx (which has the same problem as
-% us) handles it with this amazing macro to replace tokens. I've
-% tinkered with it a little for texinfo, but it's definitely from there.
-%
-% #1 is the tokens to replace.
-% #2 is the replacement.
-% #3 is the control sequence with the string.
-%
-\def\HyPsdSubst#1#2#3{%
- \def\HyPsdReplace##1#1##2\END{%
- ##1%
- \ifx\\##2\\%
- \else
- #2%
- \HyReturnAfterFi{%
- \HyPsdReplace##2\END
- }%
- \fi
- }%
- \xdef#3{\expandafter\HyPsdReplace#3#1\END}%
-}
-\long\def\HyReturnAfterFi#1\fi{\fi#1}
-
-% #1 is a control sequence in which to do the replacements.
-\def\backslashparens#1{%
- \xdef#1{#1}% redefine it as its expansion; the definition is simply
- % \lastnode when called from \setref -> \pdfmkdest.
- \HyPsdSubst{(}{\backslashlparen}{#1}%
- \HyPsdSubst{)}{\backslashrparen}{#1}%
-}
-
-{\catcode\exclamChar = 0 \catcode\backChar = \other
- !gdef!backslashlparen{\(}%
- !gdef!backslashrparen{\)}%
-}
-
-\ifpdf
- \input pdfcolor
- \pdfcatalog{/PageMode /UseOutlines}%
- \def\dopdfimage#1#2#3{%
- \def\imagewidth{#2}%
- \def\imageheight{#3}%
- % without \immediate, pdftex seg faults when the same image is
- % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
- \ifnum\pdftexversion < 14
- \immediate\pdfimage
- \else
- \immediate\pdfximage
- \fi
- \ifx\empty\imagewidth\else width \imagewidth \fi
- \ifx\empty\imageheight\else height \imageheight \fi
- \ifnum\pdftexversion<13
- #1.pdf%
- \else
- {#1.pdf}%
- \fi
- \ifnum\pdftexversion < 14 \else
- \pdfrefximage \pdflastximage
- \fi}
- \def\pdfmkdest#1{{%
- % We have to set dummies so commands such as @code, and characters
- % such as \, aren't expanded when present in a section title.
- \atdummies
- \turnoffactive
- \activebackslashdouble
- \def\pdfdestname{#1}%
- \backslashparens\pdfdestname
- \pdfdest name{\pdfdestname} xyz%
- }}%
- %
- % used to mark target names; must be expandable.
- \def\pdfmkpgn#1{#1}%
- %
- \let\linkcolor = \Blue % was Cyan, but that seems light?
- \def\endlink{\Black\pdfendlink}
- % Adding outlines to PDF; macros for calculating structure of outlines
- % come from Petr Olsak
- \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
- \else \csname#1\endcsname \fi}
- \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
- \advance\tempnum by 1
- \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
- %
- % #1 is the section text, which is what will be displayed in the
- % outline by the pdf viewer. #2 is the pdf expression for the number
- % of subentries (or empty, for subsubsections). #3 is the node text,
- % which might be empty if this toc entry had no corresponding node.
- % #4 is the page number
- %
- \def\dopdfoutline#1#2#3#4{%
- % Generate a link to the node text if that exists; else, use the
- % page number. We could generate a destination for the section
- % text in the case where a section has no node, but it doesn't
- % seem worth the trouble, since most documents are normally structured.
- \def\pdfoutlinedest{#3}%
- \ifx\pdfoutlinedest\empty
- \def\pdfoutlinedest{#4}%
- \else
- % Doubled backslashes in the name.
- {\activebackslashdouble \xdef\pdfoutlinedest{#3}%
- \backslashparens\pdfoutlinedest}%
- \fi
- %
- % Also double the backslashes in the display string.
- {\activebackslashdouble \xdef\pdfoutlinetext{#1}%
- \backslashparens\pdfoutlinetext}%
- %
- \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
- }
- %
- \def\pdfmakeoutlines{%
- \begingroup
- % Thanh's hack / proper braces in bookmarks
- \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
- \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
- %
- % Read toc silently, to get counts of subentries for \pdfoutline.
- \def\numchapentry##1##2##3##4{%
- \def\thischapnum{##2}%
- \def\thissecnum{0}%
- \def\thissubsecnum{0}%
- }%
- \def\numsecentry##1##2##3##4{%
- \advancenumber{chap\thischapnum}%
- \def\thissecnum{##2}%
- \def\thissubsecnum{0}%
- }%
- \def\numsubsecentry##1##2##3##4{%
- \advancenumber{sec\thissecnum}%
- \def\thissubsecnum{##2}%
- }%
- \def\numsubsubsecentry##1##2##3##4{%
- \advancenumber{subsec\thissubsecnum}%
- }%
- \def\thischapnum{0}%
- \def\thissecnum{0}%
- \def\thissubsecnum{0}%
- %
- % use \def rather than \let here because we redefine \chapentry et
- % al. a second time, below.
- \def\appentry{\numchapentry}%
- \def\appsecentry{\numsecentry}%
- \def\appsubsecentry{\numsubsecentry}%
- \def\appsubsubsecentry{\numsubsubsecentry}%
- \def\unnchapentry{\numchapentry}%
- \def\unnsecentry{\numsecentry}%
- \def\unnsubsecentry{\numsubsecentry}%
- \def\unnsubsubsecentry{\numsubsubsecentry}%
- \readdatafile{toc}%
- %
- % Read toc second time, this time actually producing the outlines.
- % The `-' means take the \expnumber as the absolute number of
- % subentries, which we calculated on our first read of the .toc above.
- %
- % We use the node names as the destinations.
- \def\numchapentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
- \def\numsecentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
- \def\numsubsecentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
- \def\numsubsubsecentry##1##2##3##4{% count is always zero
- \dopdfoutline{##1}{}{##3}{##4}}%
- %
- % PDF outlines are displayed using system fonts, instead of
- % document fonts. Therefore we cannot use special characters,
- % since the encoding is unknown. For example, the eogonek from
- % Latin 2 (0xea) gets translated to a | character. Info from
- % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
- %
- % xx to do this right, we have to translate 8-bit characters to
- % their "best" equivalent, based on the @documentencoding. Right
- % now, I guess we'll just let the pdf reader have its way.
- \indexnofonts
- \setupdatafile
- \activebackslash
- \input \jobname.toc
- \endgroup
- }
- %
- \def\skipspaces#1{\def\PP{#1}\def\D{|}%
- \ifx\PP\D\let\nextsp\relax
- \else\let\nextsp\skipspaces
- \ifx\p\space\else\addtokens{\filename}{\PP}%
- \advance\filenamelength by 1
- \fi
- \fi
- \nextsp}
- \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
- \ifnum\pdftexversion < 14
- \let \startlink \pdfannotlink
- \else
- \let \startlink \pdfstartlink
- \fi
- \def\pdfurl#1{%
- \begingroup
- \normalturnoffactive\def\@{@}%
- \makevalueexpandable
- \leavevmode\Red
- \startlink attr{/Border [0 0 0]}%
- user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
- \endgroup}
- \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
- \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
- \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
- \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
- \def\maketoks{%
- \expandafter\poptoks\the\toksA|ENDTOKS|\relax
- \ifx\first0\adn0
- \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
- \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
- \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
- \else
- \ifnum0=\countA\else\makelink\fi
- \ifx\first.\let\next=\done\else
- \let\next=\maketoks
- \addtokens{\toksB}{\the\toksD}
- \ifx\first,\addtokens{\toksB}{\space}\fi
- \fi
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
- \next}
- \def\makelink{\addtokens{\toksB}%
- {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
- \def\pdflink#1{%
- \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
- \linkcolor #1\endlink}
- \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-\else
- \let\pdfmkdest = \gobble
- \let\pdfurl = \gobble
- \let\endlink = \relax
- \let\linkcolor = \relax
- \let\pdfmakeoutlines = \relax
-\fi % \ifx\pdfoutput
-
-
-\message{fonts,}
-
-% Change the current font style to #1, remembering it in \curfontstyle.
-% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
-% italics, not bold italics.
-%
-\def\setfontstyle#1{%
- \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
- \csname ten#1\endcsname % change the current font
-}
-
-% Select #1 fonts with the current style.
-%
-\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
-
-\def\rm{\fam=0 \setfontstyle{rm}}
-\def\it{\fam=\itfam \setfontstyle{it}}
-\def\sl{\fam=\slfam \setfontstyle{sl}}
-\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
-\def\tt{\fam=\ttfam \setfontstyle{tt}}
-
-% Texinfo sort of supports the sans serif font style, which plain TeX does not.
-% So we set up a \sf.
-\newfam\sffam
-\def\sf{\fam=\sffam \setfontstyle{sf}}
-\let\li = \sf % Sometimes we call it \li, not \sf.
-
-% We don't need math for this font style.
-\def\ttsl{\setfontstyle{ttsl}}
-
-% Default leading.
-\newdimen\textleading \textleading = 13.2pt
-
-% Set the baselineskip to #1, and the lineskip and strut size
-% correspondingly. There is no deep meaning behind these magic numbers
-% used as factors; they just match (closely enough) what Knuth defined.
-%
-\def\lineskipfactor{.08333}
-\def\strutheightpercent{.70833}
-\def\strutdepthpercent {.29167}
-%
-\def\setleading#1{%
- \normalbaselineskip = #1\relax
- \normallineskip = \lineskipfactor\normalbaselineskip
- \normalbaselines
- \setbox\strutbox =\hbox{%
- \vrule width0pt height\strutheightpercent\baselineskip
- depth \strutdepthpercent \baselineskip
- }%
-}
-
-% Set the font macro #1 to the font named #2, adding on the
-% specified font prefix (normally `cm').
-% #3 is the font's design size, #4 is a scale factor
-\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
-
-% Use cm as the default font prefix.
-% To specify the font prefix, you must define \fontprefix
-% before you read in texinfo.tex.
-\ifx\fontprefix\undefined
-\def\fontprefix{cm}
-\fi
-% Support font families that don't use the same naming scheme as CM.
-\def\rmshape{r}
-\def\rmbshape{bx} %where the normal face is bold
-\def\bfshape{b}
-\def\bxshape{bx}
-\def\ttshape{tt}
-\def\ttbshape{tt}
-\def\ttslshape{sltt}
-\def\itshape{ti}
-\def\itbshape{bxti}
-\def\slshape{sl}
-\def\slbshape{bxsl}
-\def\sfshape{ss}
-\def\sfbshape{ss}
-\def\scshape{csc}
-\def\scbshape{csc}
-
-% Text fonts (11.2pt, magstep1).
-\def\textnominalsize{11pt}
-\edef\mainmagstep{\magstephalf}
-\setfont\textrm\rmshape{10}{\mainmagstep}
-\setfont\texttt\ttshape{10}{\mainmagstep}
-\setfont\textbf\bfshape{10}{\mainmagstep}
-\setfont\textit\itshape{10}{\mainmagstep}
-\setfont\textsl\slshape{10}{\mainmagstep}
-\setfont\textsf\sfshape{10}{\mainmagstep}
-\setfont\textsc\scshape{10}{\mainmagstep}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}
-\font\texti=cmmi10 scaled \mainmagstep
-\font\textsy=cmsy10 scaled \mainmagstep
-
-% A few fonts for @defun names and args.
-\setfont\defbf\bfshape{10}{\magstep1}
-\setfont\deftt\ttshape{10}{\magstep1}
-\setfont\defttsl\ttslshape{10}{\magstep1}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
-
-% Fonts for indices, footnotes, small examples (9pt).
-\def\smallnominalsize{9pt}
-\setfont\smallrm\rmshape{9}{1000}
-\setfont\smalltt\ttshape{9}{1000}
-\setfont\smallbf\bfshape{10}{900}
-\setfont\smallit\itshape{9}{1000}
-\setfont\smallsl\slshape{9}{1000}
-\setfont\smallsf\sfshape{9}{1000}
-\setfont\smallsc\scshape{10}{900}
-\setfont\smallttsl\ttslshape{10}{900}
-\font\smalli=cmmi9
-\font\smallsy=cmsy9
-
-% Fonts for small examples (8pt).
-\def\smallernominalsize{8pt}
-\setfont\smallerrm\rmshape{8}{1000}
-\setfont\smallertt\ttshape{8}{1000}
-\setfont\smallerbf\bfshape{10}{800}
-\setfont\smallerit\itshape{8}{1000}
-\setfont\smallersl\slshape{8}{1000}
-\setfont\smallersf\sfshape{8}{1000}
-\setfont\smallersc\scshape{10}{800}
-\setfont\smallerttsl\ttslshape{10}{800}
-\font\smalleri=cmmi8
-\font\smallersy=cmsy8
-
-% Fonts for title page (20.4pt):
-\def\titlenominalsize{20pt}
-\setfont\titlerm\rmbshape{12}{\magstep3}
-\setfont\titleit\itbshape{10}{\magstep4}
-\setfont\titlesl\slbshape{10}{\magstep4}
-\setfont\titlett\ttbshape{12}{\magstep3}
-\setfont\titlettsl\ttslshape{10}{\magstep4}
-\setfont\titlesf\sfbshape{17}{\magstep1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-\def\authortt{\sectt}
-
-% Chapter (and unnumbered) fonts (17.28pt).
-\def\chapnominalsize{17pt}
-\setfont\chaprm\rmbshape{12}{\magstep2}
-\setfont\chapit\itbshape{10}{\magstep3}
-\setfont\chapsl\slbshape{10}{\magstep3}
-\setfont\chaptt\ttbshape{12}{\magstep2}
-\setfont\chapttsl\ttslshape{10}{\magstep3}
-\setfont\chapsf\sfbshape{17}{1000}
-\let\chapbf=\chaprm
-\setfont\chapsc\scbshape{10}{\magstep3}
-\font\chapi=cmmi12 scaled \magstep2
-\font\chapsy=cmsy10 scaled \magstep3
-
-% Section fonts (14.4pt).
-\def\secnominalsize{14pt}
-\setfont\secrm\rmbshape{12}{\magstep1}
-\setfont\secit\itbshape{10}{\magstep2}
-\setfont\secsl\slbshape{10}{\magstep2}
-\setfont\sectt\ttbshape{12}{\magstep1}
-\setfont\secttsl\ttslshape{10}{\magstep2}
-\setfont\secsf\sfbshape{12}{\magstep1}
-\let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep2}
-\font\seci=cmmi12 scaled \magstep1
-\font\secsy=cmsy10 scaled \magstep2
-
-% Subsection fonts (13.15pt).
-\def\ssecnominalsize{13pt}
-\setfont\ssecrm\rmbshape{12}{\magstephalf}
-\setfont\ssecit\itbshape{10}{1315}
-\setfont\ssecsl\slbshape{10}{1315}
-\setfont\ssectt\ttbshape{12}{\magstephalf}
-\setfont\ssecttsl\ttslshape{10}{1315}
-\setfont\ssecsf\sfbshape{12}{\magstephalf}
-\let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{1315}
-\font\sseci=cmmi12 scaled \magstephalf
-\font\ssecsy=cmsy10 scaled 1315
-
-% Reduced fonts for @acro in text (10pt).
-\def\reducednominalsize{10pt}
-\setfont\reducedrm\rmshape{10}{1000}
-\setfont\reducedtt\ttshape{10}{1000}
-\setfont\reducedbf\bfshape{10}{1000}
-\setfont\reducedit\itshape{10}{1000}
-\setfont\reducedsl\slshape{10}{1000}
-\setfont\reducedsf\sfshape{10}{1000}
-\setfont\reducedsc\scshape{10}{1000}
-\setfont\reducedttsl\ttslshape{10}{1000}
-\font\reducedi=cmmi10
-\font\reducedsy=cmsy10
-
-% In order for the font changes to affect most math symbols and letters,
-% we have to define the \textfont of the standard families. Since
-% texinfo doesn't allow for producing subscripts and superscripts except
-% in the main text, we don't bother to reset \scriptfont and
-% \scriptscriptfont (which would also require loading a lot more fonts).
-%
-\def\resetmathfonts{%
- \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
- \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
- \textfont\ttfam=\tentt \textfont\sffam=\tensf
-}
-
-% The font-changing commands redefine the meanings of \tenSTYLE, instead
-% of just \STYLE. We do this because \STYLE needs to also set the
-% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire
-% \tenSTYLE to set the current font.
-%
-% Each font-changing command also sets the names \lsize (one size lower)
-% and \lllsize (three sizes lower). These relative commands are used in
-% the LaTeX logo and acronyms.
-%
-% This all needs generalizing, badly.
-%
-\def\textfonts{%
- \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
- \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
- \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
- \let\tenttsl=\textttsl
- \def\curfontsize{text}%
- \def\lsize{reduced}\def\lllsize{smaller}%
- \resetmathfonts \setleading{\textleading}}
-\def\titlefonts{%
- \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
- \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
- \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
- \let\tenttsl=\titlettsl
- \def\curfontsize{title}%
- \def\lsize{chap}\def\lllsize{subsec}%
- \resetmathfonts \setleading{25pt}}
-\def\titlefont#1{{\titlefonts\rm #1}}
-\def\chapfonts{%
- \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
- \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
- \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
- \let\tenttsl=\chapttsl
- \def\curfontsize{chap}%
- \def\lsize{sec}\def\lllsize{text}%
- \resetmathfonts \setleading{19pt}}
-\def\secfonts{%
- \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
- \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
- \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
- \let\tenttsl=\secttsl
- \def\curfontsize{sec}%
- \def\lsize{subsec}\def\lllsize{reduced}%
- \resetmathfonts \setleading{16pt}}
-\def\subsecfonts{%
- \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
- \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
- \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
- \let\tenttsl=\ssecttsl
- \def\curfontsize{ssec}%
- \def\lsize{text}\def\lllsize{small}%
- \resetmathfonts \setleading{15pt}}
-\let\subsubsecfonts = \subsecfonts
-\def\reducedfonts{%
- \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
- \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
- \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
- \let\tenttsl=\reducedttsl
- \def\curfontsize{reduced}%
- \def\lsize{small}\def\lllsize{smaller}%
- \resetmathfonts \setleading{10.5pt}}
-\def\smallfonts{%
- \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
- \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
- \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
- \let\tenttsl=\smallttsl
- \def\curfontsize{small}%
- \def\lsize{smaller}\def\lllsize{smaller}%
- \resetmathfonts \setleading{10.5pt}}
-\def\smallerfonts{%
- \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
- \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
- \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
- \let\tenttsl=\smallerttsl
- \def\curfontsize{smaller}%
- \def\lsize{smaller}\def\lllsize{smaller}%
- \resetmathfonts \setleading{9.5pt}}
-
-% Set the fonts to use with the @small... environments.
-\let\smallexamplefonts = \smallfonts
-
-% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample
-% can fit this many characters:
-% 8.5x11=86 smallbook=72 a4=90 a5=69
-% If we use \scriptfonts (8pt), then we can fit this many characters:
-% 8.5x11=90+ smallbook=80 a4=90+ a5=77
-% For me, subjectively, the few extra characters that fit aren't worth
-% the additional smallness of 8pt. So I'm making the default 9pt.
-%
-% By the way, for comparison, here's what fits with @example (10pt):
-% 8.5x11=71 smallbook=60 a4=75 a5=58
-%
-% I wish the USA used A4 paper.
-% --karl, 24jan03.
-
-
-% Set up the default fonts, so we can use them for creating boxes.
-%
-\textfonts \rm
-
-% Define these so they can be easily changed for other fonts.
-\def\angleleft{$\langle$}
-\def\angleright{$\rangle$}
-
-% Count depth in font-changes, for error checks
-\newcount\fontdepth \fontdepth=0
-
-% Fonts for short table of contents.
-\setfont\shortcontrm\rmshape{12}{1000}
-\setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12
-\setfont\shortcontsl\slshape{12}{1000}
-\setfont\shortconttt\ttshape{12}{1000}
-
-%% Add scribe-like font environments, plus @l for inline lisp (usually sans
-%% serif) and @ii for TeX italic
-
-% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
-% unless the following character is such as not to need one.
-\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else
- \ptexslash\fi\fi\fi}
-\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
-\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
-
-% like \smartslanted except unconditionally uses \ttsl.
-% @var is set to this for defun arguments.
-\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
-
-% like \smartslanted except unconditionally use \sl. We never want
-% ttsl for book titles, do we?
-\def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
-
-\let\i=\smartitalic
-\let\slanted=\smartslanted
-\let\var=\smartslanted
-\let\dfn=\smartslanted
-\let\emph=\smartitalic
-
-% @b, explicit bold.
-\def\b#1{{\bf #1}}
-\let\strong=\b
-
-% @sansserif, explicit sans.
-\def\sansserif#1{{\sf #1}}
-
-% We can't just use \exhyphenpenalty, because that only has effect at
-% the end of a paragraph. Restore normal hyphenation at the end of the
-% group within which \nohyphenation is presumably called.
-%
-\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
-\def\restorehyphenation{\hyphenchar\font = `- }
-
-% Set sfcode to normal for the chars that usually have another value.
-% Can't use plain's \frenchspacing because it uses the `\x notation, and
-% sometimes \x has an active definition that messes things up.
-%
-\catcode`@=11
- \def\plainfrenchspacing{%
- \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
- \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
- \def\endofsentencespacefactor{1000}% for @. and friends
- }
- \def\plainnonfrenchspacing{%
- \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
- \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
- \def\endofsentencespacefactor{3000}% for @. and friends
- }
-\catcode`@=\other
-\def\endofsentencespacefactor{3000}% default
-
-\def\t#1{%
- {\tt \rawbackslash \plainfrenchspacing #1}%
- \null
-}
-\def\samp#1{`\tclose{#1}'\null}
-\setfont\keyrm\rmshape{8}{1000}
-\font\keysy=cmsy9
-\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
- \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
- \vbox{\hrule\kern-0.4pt
- \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
- \kern-0.4pt\hrule}%
- \kern-.06em\raise0.4pt\hbox{\angleright}}}}
-% The old definition, with no lozenge:
-%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
-\def\ctrl #1{{\tt \rawbackslash \hat}#1}
-
-% @file, @option are the same as @samp.
-\let\file=\samp
-\let\option=\samp
-
-% @code is a modification of @t,
-% which makes spaces the same size as normal in the surrounding text.
-\def\tclose#1{%
- {%
- % Change normal interword space to be same as for the current font.
- \spaceskip = \fontdimen2\font
- %
- % Switch to typewriter.
- \tt
- %
- % But `\ ' produces the large typewriter interword space.
- \def\ {{\spaceskip = 0pt{} }}%
- %
- % Turn off hyphenation.
- \nohyphenation
- %
- \rawbackslash
- \plainfrenchspacing
- #1%
- }%
- \null
-}
-
-% We *must* turn on hyphenation at `-' and `_' in @code.
-% Otherwise, it is too hard to avoid overfull hboxes
-% in the Emacs manual, the Library manual, etc.
-
-% Unfortunately, TeX uses one parameter (\hyphenchar) to control
-% both hyphenation at - and hyphenation within words.
-% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate at a dash.
-% -- rms.
-{
- \catcode`\-=\active
- \catcode`\_=\active
- %
- \global\def\code{\begingroup
- \catcode`\-=\active \let-\codedash
- \catcode`\_=\active \let_\codeunder
- \codex
- }
-}
-
-\def\realdash{-}
-\def\codedash{-\discretionary{}{}{}}
-\def\codeunder{%
- % this is all so @math{@code{var_name}+1} can work. In math mode, _
- % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
- % will therefore expand the active definition of _, which is us
- % (inside @code that is), therefore an endless loop.
- \ifusingtt{\ifmmode
- \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
- \else\normalunderscore \fi
- \discretionary{}{}{}}%
- {\_}%
-}
-\def\codex #1{\tclose{#1}\endgroup}
-
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-
-% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
-% `example' (@kbd uses ttsl only inside of @example and friends),
-% or `code' (@kbd uses normal tty font always).
-\parseargdef\kbdinputstyle{%
- \def\arg{#1}%
- \ifx\arg\worddistinct
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
- \else\ifx\arg\wordexample
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
- \else\ifx\arg\wordcode
- \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @kbdinputstyle option `\arg'}%
- \fi\fi\fi
-}
-\def\worddistinct{distinct}
-\def\wordexample{example}
-\def\wordcode{code}
-
-% Default is `distinct.'
-\kbdinputstyle distinct
-
-\def\xkey{\key}
-\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
-\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\look}}\fi
-\else{\tclose{\kbdfont\look}}\fi}
-
-% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
-\let\indicateurl=\code
-\let\env=\code
-\let\command=\code
-
-% @uref (abbreviation for `urlref') takes an optional (comma-separated)
-% second argument specifying the text to display and an optional third
-% arg as text to display instead of (rather than in addition to) the url
-% itself. First (mandatory) arg is the url. Perhaps eventually put in
-% a hypertex \special here.
-%
-\def\uref#1{\douref #1,,,\finish}
-\def\douref#1,#2,#3,#4\finish{\begingroup
- \unsepspaces
- \pdfurl{#1}%
- \setbox0 = \hbox{\ignorespaces #3}%
- \ifdim\wd0 > 0pt
- \unhbox0 % third arg given, show only that
- \else
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \ifpdf
- \unhbox0 % PDF: 2nd arg given, show only it
- \else
- \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
- \fi
- \else
- \code{#1}% only url given, so show it
- \fi
- \fi
- \endlink
-\endgroup}
-
-% @url synonym for @uref, since that's how everyone uses it.
-%
-\let\url=\uref
-
-% rms does not like angle brackets --karl, 17may97.
-% So now @email is just like @uref, unless we are pdf.
-%
-%\def\email#1{\angleleft{\tt #1}\angleright}
-\ifpdf
- \def\email#1{\doemail#1,,\finish}
- \def\doemail#1,#2,#3\finish{\begingroup
- \unsepspaces
- \pdfurl{mailto:#1}%
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
- \endlink
- \endgroup}
-\else
- \let\email=\uref
-\fi
-
-% Check if we are currently using a typewriter font. Since all the
-% Computer Modern typewriter fonts have zero interword stretch (and
-% shrink), and it is reasonable to expect all typewriter fonts to have
-% this property, we can check that font parameter.
-%
-\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
-
-% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
-% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
-%
-\def\dmn#1{\thinspace #1}
-
-\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
-
-% @l was never documented to mean ``switch to the Lisp font'',
-% and it is not used as such in any manual I can find. We need it for
-% Polish suppressed-l. --karl, 22sep96.
-%\def\l#1{{\li #1}\null}
-
-% Explicit font changes: @r, @sc, undocumented @ii.
-\def\r#1{{\rm #1}} % roman font
-\def\sc#1{{\smallcaps#1}} % smallcaps font
-\def\ii#1{{\it #1}} % italic font
-
-% @acronym for "FBI", "NATO", and the like.
-% We print this one point size smaller, since it's intended for
-% all-uppercase.
-%
-\def\acronym#1{\doacronym #1,,\finish}
-\def\doacronym#1,#2,#3\finish{%
- {\selectfonts\lsize #1}%
- \def\temp{#2}%
- \ifx\temp\empty \else
- \space ({\unsepspaces \ignorespaces \temp \unskip})%
- \fi
-}
-
-% @abbr for "Comput. J." and the like.
-% No font change, but don't do end-of-sentence spacing.
-%
-\def\abbr#1{\doabbr #1,,\finish}
-\def\doabbr#1,#2,#3\finish{%
- {\plainfrenchspacing #1}%
- \def\temp{#2}%
- \ifx\temp\empty \else
- \space ({\unsepspaces \ignorespaces \temp \unskip})%
- \fi
-}
-
-% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
-%
-\def\pounds{{\it\$}}
-
-% @euro{} comes from a separate font, depending on the current style.
-% We use the free feym* fonts from the eurosym package by Henrik
-% Theiling, which support regular, slanted, bold and bold slanted (and
-% "outlined" (blackboard board, sort of) versions, which we don't need).
-% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
-%
-% Although only regular is the truly official Euro symbol, we ignore
-% that. The Euro is designed to be slightly taller than the regular
-% font height.
-%
-% feymr - regular
-% feymo - slanted
-% feybr - bold
-% feybo - bold slanted
-%
-% There is no good (free) typewriter version, to my knowledge.
-% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
-% Hmm.
-%
-% Also doesn't work in math. Do we need to do math with euro symbols?
-% Hope not.
-%
-%
-\def\euro{{\eurofont e}}
-\def\eurofont{%
- % We set the font at each command, rather than predefining it in
- % \textfonts and the other font-switching commands, so that
- % installations which never need the symbol don't have to have the
- % font installed.
- %
- % There is only one designed size (nominal 10pt), so we always scale
- % that to the current nominal size.
- %
- % By the way, simply using "at 1em" works for cmr10 and the like, but
- % does not work for cmbx10 and other extended/shrunken fonts.
- %
- \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
- %
- \ifx\curfontstyle\bfstylename
- % bold:
- \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
- \else
- % regular:
- \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
- \fi
- \thiseurofont
-}
-
-% @registeredsymbol - R in a circle. The font for the R should really
-% be smaller yet, but lllsize is the best we can do for now.
-% Adapted from the plain.tex definition of \copyright.
-%
-\def\registeredsymbol{%
- $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
- \hfil\crcr\Orb}}%
- }$%
-}
-
-% Laurent Siebenmann reports \Orb undefined with:
-% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38
-% so we'll define it if necessary.
-%
-\ifx\Orb\undefined
-\def\Orb{\mathhexbox20D}
-\fi
-
-
-\message{page headings,}
-
-\newskip\titlepagetopglue \titlepagetopglue = 1.5in
-\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
-
-% First the title page. Must do @settitle before @titlepage.
-\newif\ifseenauthor
-\newif\iffinishedtitlepage
-
-% Do an implicit @contents or @shortcontents after @end titlepage if the
-% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
-%
-\newif\ifsetcontentsaftertitlepage
- \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
-\newif\ifsetshortcontentsaftertitlepage
- \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
-
-\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
- \endgroup\page\hbox{}\page}
-
-\envdef\titlepage{%
- % Open one extra group, as we want to close it in the middle of \Etitlepage.
- \begingroup
- \parindent=0pt \textfonts
- % Leave some space at the very top of the page.
- \vglue\titlepagetopglue
- % No rule at page bottom unless we print one at the top with @title.
- \finishedtitlepagetrue
- %
- % Most title ``pages'' are actually two pages long, with space
- % at the top of the second. We don't want the ragged left on the second.
- \let\oldpage = \page
- \def\page{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- \let\page = \oldpage
- \page
- \null
- }%
-}
-
-\def\Etitlepage{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- % It is important to do the page break before ending the group,
- % because the headline and footline are only empty inside the group.
- % If we use the new definition of \page, we always get a blank page
- % after the title page, which we certainly don't want.
- \oldpage
- \endgroup
- %
- % Need this before the \...aftertitlepage checks so that if they are
- % in effect the toc pages will come out with page numbers.
- \HEADINGSon
- %
- % If they want short, they certainly want long too.
- \ifsetshortcontentsaftertitlepage
- \shortcontents
- \contents
- \global\let\shortcontents = \relax
- \global\let\contents = \relax
- \fi
- %
- \ifsetcontentsaftertitlepage
- \contents
- \global\let\contents = \relax
- \global\let\shortcontents = \relax
- \fi
-}
-
-\def\finishtitlepage{%
- \vskip4pt \hrule height 2pt width \hsize
- \vskip\titlepagebottomglue
- \finishedtitlepagetrue
-}
-
-%%% Macros to be used within @titlepage:
-
-\let\subtitlerm=\tenrm
-\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
-
-\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
- \let\tt=\authortt}
-
-\parseargdef\title{%
- \checkenv\titlepage
- \leftline{\titlefonts\rm #1}
- % print a rule at the page bottom also.
- \finishedtitlepagefalse
- \vskip4pt \hrule height 4pt width \hsize \vskip4pt
-}
-
-\parseargdef\subtitle{%
- \checkenv\titlepage
- {\subtitlefont \rightline{#1}}%
-}
-
-% @author should come last, but may come many times.
-% It can also be used inside @quotation.
-%
-\parseargdef\author{%
- \def\temp{\quotation}%
- \ifx\thisenv\temp
- \def\quotationauthor{#1}% printed in \Equotation.
- \else
- \checkenv\titlepage
- \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
- {\authorfont \leftline{#1}}%
- \fi
-}
-
-
-%%% Set up page headings and footings.
-
-\let\thispage=\folio
-
-\newtoks\evenheadline % headline on even pages
-\newtoks\oddheadline % headline on odd pages
-\newtoks\evenfootline % footline on even pages
-\newtoks\oddfootline % footline on odd pages
-
-% Now make TeX use those variables
-\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
- \else \the\evenheadline \fi}}
-\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
- \else \the\evenfootline \fi}\HEADINGShook}
-\let\HEADINGShook=\relax
-
-% Commands to set those variables.
-% For example, this is what @headings on does
-% @evenheading @thistitle|@thispage|@thischapter
-% @oddheading @thischapter|@thispage|@thistitle
-% @evenfooting @thisfile||
-% @oddfooting ||@thisfile
-
-
-\def\evenheading{\parsearg\evenheadingxxx}
-\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
-\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
-\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\def\oddheading{\parsearg\oddheadingxxx}
-\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
-\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
-\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
-
-\def\evenfooting{\parsearg\evenfootingxxx}
-\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
-\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
-\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\def\oddfooting{\parsearg\oddfootingxxx}
-\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
-\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
- \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
- %
- % Leave some space for the footline. Hopefully ok to assume
- % @evenfooting will not be used by itself.
- \global\advance\pageheight by -\baselineskip
- \global\advance\vsize by -\baselineskip
-}
-
-\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
-
-
-% @headings double turns headings on for double-sided printing.
-% @headings single turns headings on for single-sided printing.
-% @headings off turns them off.
-% @headings on same as @headings double, retained for compatibility.
-% @headings after turns on double-sided headings after this page.
-% @headings doubleafter turns on double-sided headings after this page.
-% @headings singleafter turns on single-sided headings after this page.
-% By default, they are off at the start of a document,
-% and turned `on' after @end titlepage.
-
-\def\headings #1 {\csname HEADINGS#1\endcsname}
-
-\def\HEADINGSoff{%
-\global\evenheadline={\hfil} \global\evenfootline={\hfil}
-\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
-\HEADINGSoff
-% When we turn headings on, set the page number to 1.
-% For double-sided printing, put current file name in lower left corner,
-% chapter name on inside top of right hand pages, document
-% title on inside top of left hand pages, and page numbers on outside top
-% edge of all pages.
-\def\HEADINGSdouble{%
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-\let\contentsalignmacro = \chappager
-
-% For single-sided printing, chapter title goes across top left of page,
-% page number on top right.
-\def\HEADINGSsingle{%
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-\def\HEADINGSon{\HEADINGSdouble}
-
-\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
-\let\HEADINGSdoubleafter=\HEADINGSafter
-\def\HEADINGSdoublex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-
-\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
-\def\HEADINGSsinglex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-
-% Subroutines used in generating headings
-% This produces Day Month Year style of output.
-% Only define if not already defined, in case a txi-??.tex file has set
-% up a different format (e.g., txi-cs.tex does this).
-\ifx\today\undefined
-\def\today{%
- \number\day\space
- \ifcase\month
- \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
- \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
- \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
- \fi
- \space\number\year}
-\fi
-
-% @settitle line... specifies the title of the document, for headings.
-% It generates no output of its own.
-\def\thistitle{\putwordNoTitle}
-\def\settitle{\parsearg{\gdef\thistitle}}
-
-
-\message{tables,}
-% Tables -- @table, @ftable, @vtable, @item(x).
-
-% default indentation of table text
-\newdimen\tableindent \tableindent=.8in
-% default indentation of @itemize and @enumerate text
-\newdimen\itemindent \itemindent=.3in
-% margin between end of table item and start of table text.
-\newdimen\itemmargin \itemmargin=.1in
-
-% used internally for \itemindent minus \itemmargin
-\newdimen\itemmax
-
-% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
-% these defs.
-% They also define \itemindex
-% to index the item name in whatever manner is desired (perhaps none).
-
-\newif\ifitemxneedsnegativevskip
-
-\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
-
-\def\internalBitem{\smallbreak \parsearg\itemzzz}
-\def\internalBitemx{\itemxpar \parsearg\itemzzz}
-
-\def\itemzzz #1{\begingroup %
- \advance\hsize by -\rightskip
- \advance\hsize by -\tableindent
- \setbox0=\hbox{\itemindicate{#1}}%
- \itemindex{#1}%
- \nobreak % This prevents a break before @itemx.
- %
- % If the item text does not fit in the space we have, put it on a line
- % by itself, and do not allow a page break either before or after that
- % line. We do not start a paragraph here because then if the next
- % command is, e.g., @kindex, the whatsit would get put into the
- % horizontal list on a line by itself, resulting in extra blank space.
- \ifdim \wd0>\itemmax
- %
- % Make this a paragraph so we get the \parskip glue and wrapping,
- % but leave it ragged-right.
- \begingroup
- \advance\leftskip by-\tableindent
- \advance\hsize by\tableindent
- \advance\rightskip by0pt plus1fil
- \leavevmode\unhbox0\par
- \endgroup
- %
- % We're going to be starting a paragraph, but we don't want the
- % \parskip glue -- logically it's part of the @item we just started.
- \nobreak \vskip-\parskip
- %
- % Stop a page break at the \parskip glue coming up. However, if
- % what follows is an environment such as @example, there will be no
- % \parskip glue; then the negative vskip we just inserted would
- % cause the example and the item to crash together. So we use this
- % bizarre value of 10001 as a signal to \aboveenvbreak to insert
- % \parskip glue after all. Section titles are handled this way also.
- %
- \penalty 10001
- \endgroup
- \itemxneedsnegativevskipfalse
- \else
- % The item text fits into the space. Start a paragraph, so that the
- % following text (if any) will end up on the same line.
- \noindent
- % Do this with kerns and \unhbox so that if there is a footnote in
- % the item text, it can migrate to the main vertical list and
- % eventually be printed.
- \nobreak\kern-\tableindent
- \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
- \unhbox0
- \nobreak\kern\dimen0
- \endgroup
- \itemxneedsnegativevskiptrue
- \fi
-}
-
-\def\item{\errmessage{@item while not in a list environment}}
-\def\itemx{\errmessage{@itemx while not in a list environment}}
-
-% @table, @ftable, @vtable.
-\envdef\table{%
- \let\itemindex\gobble
- \tablecheck{table}%
-}
-\envdef\ftable{%
- \def\itemindex ##1{\doind {fn}{\code{##1}}}%
- \tablecheck{ftable}%
-}
-\envdef\vtable{%
- \def\itemindex ##1{\doind {vr}{\code{##1}}}%
- \tablecheck{vtable}%
-}
-\def\tablecheck#1{%
- \ifnum \the\catcode`\^^M=\active
- \endgroup
- \errmessage{This command won't work in this context; perhaps the problem is
- that we are \inenvironment\thisenv}%
- \def\next{\doignore{#1}}%
- \else
- \let\next\tablex
- \fi
- \next
-}
-\def\tablex#1{%
- \def\itemindicate{#1}%
- \parsearg\tabley
-}
-\def\tabley#1{%
- {%
- \makevalueexpandable
- \edef\temp{\noexpand\tablez #1\space\space\space}%
- \expandafter
- }\temp \endtablez
-}
-\def\tablez #1 #2 #3 #4\endtablez{%
- \aboveenvbreak
- \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
- \ifnum 0#2>0 \tableindent=#2\mil \fi
- \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
- \itemmax=\tableindent
- \advance \itemmax by -\itemmargin
- \advance \leftskip by \tableindent
- \exdentamount=\tableindent
- \parindent = 0pt
- \parskip = \smallskipamount
- \ifdim \parskip=0pt \parskip=2pt \fi
- \let\item = \internalBitem
- \let\itemx = \internalBitemx
-}
-\def\Etable{\endgraf\afterenvbreak}
-\let\Eftable\Etable
-\let\Evtable\Etable
-\let\Eitemize\Etable
-\let\Eenumerate\Etable
-
-% This is the counter used by @enumerate, which is really @itemize
-
-\newcount \itemno
-
-\envdef\itemize{\parsearg\doitemize}
-
-\def\doitemize#1{%
- \aboveenvbreak
- \itemmax=\itemindent
- \advance\itemmax by -\itemmargin
- \advance\leftskip by \itemindent
- \exdentamount=\itemindent
- \parindent=0pt
- \parskip=\smallskipamount
- \ifdim\parskip=0pt \parskip=2pt \fi
- \def\itemcontents{#1}%
- % @itemize with no arg is equivalent to @itemize @bullet.
- \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
- \let\item=\itemizeitem
-}
-
-% Definition of @item while inside @itemize and @enumerate.
-%
-\def\itemizeitem{%
- \advance\itemno by 1 % for enumerations
- {\let\par=\endgraf \smallbreak}% reasonable place to break
- {%
- % If the document has an @itemize directly after a section title, a
- % \nobreak will be last on the list, and \sectionheading will have
- % done a \vskip-\parskip. In that case, we don't want to zero
- % parskip, or the item text will crash with the heading. On the
- % other hand, when there is normal text preceding the item (as there
- % usually is), we do want to zero parskip, or there would be too much
- % space. In that case, we won't have a \nobreak before. At least
- % that's the theory.
- \ifnum\lastpenalty<10000 \parskip=0in \fi
- \noindent
- \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
- \vadjust{\penalty 1200}}% not good to break after first line of item.
- \flushcr
-}
-
-% \splitoff TOKENS\endmark defines \first to be the first token in
-% TOKENS, and \rest to be the remainder.
-%
-\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
-
-% Allow an optional argument of an uppercase letter, lowercase letter,
-% or number, to specify the first label in the enumerated list. No
-% argument is the same as `1'.
-%
-\envparseargdef\enumerate{\enumeratey #1 \endenumeratey}
-\def\enumeratey #1 #2\endenumeratey{%
- % If we were given no argument, pretend we were given `1'.
- \def\thearg{#1}%
- \ifx\thearg\empty \def\thearg{1}\fi
- %
- % Detect if the argument is a single token. If so, it might be a
- % letter. Otherwise, the only valid thing it can be is a number.
- % (We will always have one token, because of the test we just made.
- % This is a good thing, since \splitoff doesn't work given nothing at
- % all -- the first parameter is undelimited.)
- \expandafter\splitoff\thearg\endmark
- \ifx\rest\empty
- % Only one token in the argument. It could still be anything.
- % A ``lowercase letter'' is one whose \lccode is nonzero.
- % An ``uppercase letter'' is one whose \lccode is both nonzero, and
- % not equal to itself.
- % Otherwise, we assume it's a number.
- %
- % We need the \relax at the end of the \ifnum lines to stop TeX from
- % continuing to look for a <number>.
- %
- \ifnum\lccode\expandafter`\thearg=0\relax
- \numericenumerate % a number (we hope)
- \else
- % It's a letter.
- \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
- \lowercaseenumerate % lowercase letter
- \else
- \uppercaseenumerate % uppercase letter
- \fi
- \fi
- \else
- % Multiple tokens in the argument. We hope it's a number.
- \numericenumerate
- \fi
-}
-
-% An @enumerate whose labels are integers. The starting integer is
-% given in \thearg.
-%
-\def\numericenumerate{%
- \itemno = \thearg
- \startenumeration{\the\itemno}%
-}
-
-% The starting (lowercase) letter is in \thearg.
-\def\lowercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more lowercase letters in @enumerate; get a bigger
- alphabet}%
- \fi
- \char\lccode\itemno
- }%
-}
-
-% The starting (uppercase) letter is in \thearg.
-\def\uppercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more uppercase letters in @enumerate; get a bigger
- alphabet}
- \fi
- \char\uccode\itemno
- }%
-}
-
-% Call \doitemize, adding a period to the first argument and supplying the
-% common last two arguments. Also subtract one from the initial value in
-% \itemno, since @item increments \itemno.
-%
-\def\startenumeration#1{%
- \advance\itemno by -1
- \doitemize{#1.}\flushcr
-}
-
-% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
-% to @enumerate.
-%
-\def\alphaenumerate{\enumerate{a}}
-\def\capsenumerate{\enumerate{A}}
-\def\Ealphaenumerate{\Eenumerate}
-\def\Ecapsenumerate{\Eenumerate}
-
-
-% @multitable macros
-% Amy Hendrickson, 8/18/94, 3/6/96
-%
-% @multitable ... @end multitable will make as many columns as desired.
-% Contents of each column will wrap at width given in preamble. Width
-% can be specified either with sample text given in a template line,
-% or in percent of \hsize, the current width of text on page.
-
-% Table can continue over pages but will only break between lines.
-
-% To make preamble:
-%
-% Either define widths of columns in terms of percent of \hsize:
-% @multitable @columnfractions .25 .3 .45
-% @item ...
-%
-% Numbers following @columnfractions are the percent of the total
-% current hsize to be used for each column. You may use as many
-% columns as desired.
-
-
-% Or use a template:
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item ...
-% using the widest term desired in each column.
-
-% Each new table line starts with @item, each subsequent new column
-% starts with @tab. Empty columns may be produced by supplying @tab's
-% with nothing between them for as many times as empty columns are needed,
-% ie, @tab@tab@tab will produce two empty columns.
-
-% @item, @tab do not need to be on their own lines, but it will not hurt
-% if they are.
-
-% Sample multitable:
-
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item first col stuff @tab second col stuff @tab third col
-% @item
-% first col stuff
-% @tab
-% second col stuff
-% @tab
-% third col
-% @item first col stuff @tab second col stuff
-% @tab Many paragraphs of text may be used in any column.
-%
-% They will wrap at the width determined by the template.
-% @item@tab@tab This will be in third column.
-% @end multitable
-
-% Default dimensions may be reset by user.
-% @multitableparskip is vertical space between paragraphs in table.
-% @multitableparindent is paragraph indent in table.
-% @multitablecolmargin is horizontal space to be left between columns.
-% @multitablelinespace is space to leave between table items, baseline
-% to baseline.
-% 0pt means it depends on current normal line spacing.
-%
-\newskip\multitableparskip
-\newskip\multitableparindent
-\newdimen\multitablecolspace
-\newskip\multitablelinespace
-\multitableparskip=0pt
-\multitableparindent=6pt
-\multitablecolspace=12pt
-\multitablelinespace=0pt
-
-% Macros used to set up halign preamble:
-%
-\let\endsetuptable\relax
-\def\xendsetuptable{\endsetuptable}
-\let\columnfractions\relax
-\def\xcolumnfractions{\columnfractions}
-\newif\ifsetpercent
-
-% #1 is the @columnfraction, usually a decimal number like .5, but might
-% be just 1. We just use it, whatever it is.
-%
-\def\pickupwholefraction#1 {%
- \global\advance\colcount by 1
- \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
- \setuptable
-}
-
-\newcount\colcount
-\def\setuptable#1{%
- \def\firstarg{#1}%
- \ifx\firstarg\xendsetuptable
- \let\go = \relax
- \else
- \ifx\firstarg\xcolumnfractions
- \global\setpercenttrue
- \else
- \ifsetpercent
- \let\go\pickupwholefraction
- \else
- \global\advance\colcount by 1
- \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
- % separator; typically that is always in the input, anyway.
- \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
- \fi
- \fi
- \ifx\go\pickupwholefraction
- % Put the argument back for the \pickupwholefraction call, so
- % we'll always have a period there to be parsed.
- \def\go{\pickupwholefraction#1}%
- \else
- \let\go = \setuptable
- \fi%
- \fi
- \go
-}
-
-% multitable-only commands.
-%
-% @headitem starts a heading row, which we typeset in bold.
-% Assignments have to be global since we are inside the implicit group
-% of an alignment entry. Note that \everycr resets \everytab.
-\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}%
-%
-% A \tab used to include \hskip1sp. But then the space in a template
-% line is not enough. That is bad. So let's go back to just `&' until
-% we encounter the problem it was intended to solve again.
-% --karl, nathan@acm.org, 20apr99.
-\def\tab{\checkenv\multitable &\the\everytab}%
-
-% @multitable ... @end multitable definitions:
-%
-\newtoks\everytab % insert after every tab.
-%
-\envdef\multitable{%
- \vskip\parskip
- \startsavinginserts
- %
- % @item within a multitable starts a normal row.
- % We use \def instead of \let so that if one of the multitable entries
- % contains an @itemize, we don't choke on the \item (seen as \crcr aka
- % \endtemplate) expanding \doitemize.
- \def\item{\crcr}%
- %
- \tolerance=9500
- \hbadness=9500
- \setmultitablespacing
- \parskip=\multitableparskip
- \parindent=\multitableparindent
- \overfullrule=0pt
- \global\colcount=0
- %
- \everycr = {%
- \noalign{%
- \global\everytab={}%
- \global\colcount=0 % Reset the column counter.
- % Check for saved footnotes, etc.
- \checkinserts
- % Keeps underfull box messages off when table breaks over pages.
- %\filbreak
- % Maybe so, but it also creates really weird page breaks when the
- % table breaks over pages. Wouldn't \vfil be better? Wait until the
- % problem manifests itself, so it can be fixed for real --karl.
- }%
- }%
- %
- \parsearg\domultitable
-}
-\def\domultitable#1{%
- % To parse everything between @multitable and @item:
- \setuptable#1 \endsetuptable
- %
- % This preamble sets up a generic column definition, which will
- % be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
- % continue for many paragraphs if desired.
- \halign\bgroup &%
- \global\advance\colcount by 1
- \multistrut
- \vtop{%
- % Use the current \colcount to find the correct column width:
- \hsize=\expandafter\csname col\the\colcount\endcsname
- %
- % In order to keep entries from bumping into each other
- % we will add a \leftskip of \multitablecolspace to all columns after
- % the first one.
- %
- % If a template has been used, we will add \multitablecolspace
- % to the width of each template entry.
- %
- % If the user has set preamble in terms of percent of \hsize we will
- % use that dimension as the width of the column, and the \leftskip
- % will keep entries from bumping into each other. Table will start at
- % left margin and final column will justify at right margin.
- %
- % Make sure we don't inherit \rightskip from the outer environment.
- \rightskip=0pt
- \ifnum\colcount=1
- % The first column will be indented with the surrounding text.
- \advance\hsize by\leftskip
- \else
- \ifsetpercent \else
- % If user has not set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace.
- \advance\hsize by \multitablecolspace
- \fi
- % In either case we will make \leftskip=\multitablecolspace:
- \leftskip=\multitablecolspace
- \fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively
- % marking characters.
- \noindent\ignorespaces##\unskip\multistrut
- }\cr
-}
-\def\Emultitable{%
- \crcr
- \egroup % end the \halign
- \global\setpercentfalse
-}
-
-\def\setmultitablespacing{%
- \def\multistrut{\strut}% just use the standard line spacing
- %
- % Compute \multitablelinespace (if not defined by user) for use in
- % \multitableparskip calculation. We used define \multistrut based on
- % this, but (ironically) that caused the spacing to be off.
- % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
-\ifdim\multitablelinespace=0pt
-\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
-\global\advance\multitablelinespace by-\ht0
-\fi
-%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
-%% If so, set to same dimension as multitablelinespace.
-\ifdim\multitableparskip>\multitablelinespace
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi%
-\ifdim\multitableparskip=0pt
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi}
-
-
-\message{conditionals,}
-
-% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
-% @ifnotxml always succeed. They currently do nothing; we don't
-% attempt to check whether the conditionals are properly nested. But we
-% have to remember that they are conditionals, so that @end doesn't
-% attempt to close an environment group.
-%
-\def\makecond#1{%
- \expandafter\let\csname #1\endcsname = \relax
- \expandafter\let\csname iscond.#1\endcsname = 1
-}
-\makecond{iftex}
-\makecond{ifnotdocbook}
-\makecond{ifnothtml}
-\makecond{ifnotinfo}
-\makecond{ifnotplaintext}
-\makecond{ifnotxml}
-
-% Ignore @ignore, @ifhtml, @ifinfo, and the like.
-%
-\def\direntry{\doignore{direntry}}
-\def\documentdescription{\doignore{documentdescription}}
-\def\docbook{\doignore{docbook}}
-\def\html{\doignore{html}}
-\def\ifdocbook{\doignore{ifdocbook}}
-\def\ifhtml{\doignore{ifhtml}}
-\def\ifinfo{\doignore{ifinfo}}
-\def\ifnottex{\doignore{ifnottex}}
-\def\ifplaintext{\doignore{ifplaintext}}
-\def\ifxml{\doignore{ifxml}}
-\def\ignore{\doignore{ignore}}
-\def\menu{\doignore{menu}}
-\def\xml{\doignore{xml}}
-
-% Ignore text until a line `@end #1', keeping track of nested conditionals.
-%
-% A count to remember the depth of nesting.
-\newcount\doignorecount
-
-\def\doignore#1{\begingroup
- % Scan in ``verbatim'' mode:
- \catcode`\@ = \other
- \catcode`\{ = \other
- \catcode`\} = \other
- %
- % Make sure that spaces turn into tokens that match what \doignoretext wants.
- \spaceisspace
- %
- % Count number of #1's that we've seen.
- \doignorecount = 0
- %
- % Swallow text until we reach the matching `@end #1'.
- \dodoignore{#1}%
-}
-
-{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
- \obeylines %
- %
- \gdef\dodoignore#1{%
- % #1 contains the command name as a string, e.g., `ifinfo'.
- %
- % Define a command to find the next `@end #1', which must be on a line
- % by itself.
- \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}%
- % And this command to find another #1 command, at the beginning of a
- % line. (Otherwise, we would consider a line `@c @ifset', for
- % example, to count as an @ifset for nesting.)
- \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
- %
- % And now expand that command.
- \obeylines %
- \doignoretext ^^M%
- }%
-}
-
-\def\doignoreyyy#1{%
- \def\temp{#1}%
- \ifx\temp\empty % Nothing found.
- \let\next\doignoretextzzz
- \else % Found a nested condition, ...
- \advance\doignorecount by 1
- \let\next\doignoretextyyy % ..., look for another.
- % If we're here, #1 ends with ^^M\ifinfo (for example).
- \fi
- \next #1% the token \_STOP_ is present just after this macro.
-}
-
-% We have to swallow the remaining "\_STOP_".
-%
-\def\doignoretextzzz#1{%
- \ifnum\doignorecount = 0 % We have just found the outermost @end.
- \let\next\enddoignore
- \else % Still inside a nested condition.
- \advance\doignorecount by -1
- \let\next\doignoretext % Look for the next @end.
- \fi
- \next
-}
-
-% Finish off ignored text.
-\def\enddoignore{\endgroup\ignorespaces}
-
-
-% @set VAR sets the variable VAR to an empty value.
-% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
-%
-% Since we want to separate VAR from REST-OF-LINE (which might be
-% empty), we can't just use \parsearg; we have to insert a space of our
-% own to delimit the rest of the line, and then take it out again if we
-% didn't need it.
-% We rely on the fact that \parsearg sets \catcode`\ =10.
-%
-\parseargdef\set{\setyyy#1 \endsetyyy}
-\def\setyyy#1 #2\endsetyyy{%
- {%
- \makevalueexpandable
- \def\temp{#2}%
- \edef\next{\gdef\makecsname{SET#1}}%
- \ifx\temp\empty
- \next{}%
- \else
- \setzzz#2\endsetzzz
- \fi
- }%
-}
-% Remove the trailing space \setxxx inserted.
-\def\setzzz#1 \endsetzzz{\next{#1}}
-
-% @clear VAR clears (i.e., unsets) the variable VAR.
-%
-\parseargdef\clear{%
- {%
- \makevalueexpandable
- \global\expandafter\let\csname SET#1\endcsname=\relax
- }%
-}
-
-% @value{foo} gets the text saved in variable foo.
-\def\value{\begingroup\makevalueexpandable\valuexxx}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
-{
- \catcode`\- = \active \catcode`\_ = \active
- %
- \gdef\makevalueexpandable{%
- \let\value = \expandablevalue
- % We don't want these characters active, ...
- \catcode`\-=\other \catcode`\_=\other
- % ..., but we might end up with active ones in the argument if
- % we're called from @code, as @code{@value{foo-bar_}}, though.
- % So \let them to their normal equivalents.
- \let-\realdash \let_\normalunderscore
- }
-}
-
-% We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we call \makevalueexpandable in \indexdummies).
-% The command has to be fully expandable (if the variable is set), since
-% the result winds up in the index file. This means that if the
-% variable's value contains other Texinfo commands, it's almost certain
-% it will fail (although perhaps we could fix that with sufficient work
-% to do a one-level expansion on the result, instead of complete).
-%
-\def\expandablevalue#1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- {[No value for ``#1'']}%
- \message{Variable `#1', used in @value, is not set.}%
- \else
- \csname SET#1\endcsname
- \fi
-}
-
-% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
-% with @set.
-%
-% To get special treatment of `@end ifset,' call \makeond and the redefine.
-%
-\makecond{ifset}
-\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
-\def\doifset#1#2{%
- {%
- \makevalueexpandable
- \let\next=\empty
- \expandafter\ifx\csname SET#2\endcsname\relax
- #1% If not set, redefine \next.
- \fi
- \expandafter
- }\next
-}
-\def\ifsetfail{\doignore{ifset}}
-
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
-% defined with @set, or has been undefined with @clear.
-%
-% The `\else' inside the `\doifset' parameter is a trick to reuse the
-% above code: if the variable is not set, do nothing, if it is set,
-% then redefine \next to \ifclearfail.
-%
-\makecond{ifclear}
-\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
-\def\ifclearfail{\doignore{ifclear}}
-
-% @dircategory CATEGORY -- specify a category of the dir file
-% which this file should belong to. Ignore this in TeX.
-\let\dircategory=\comment
-
-% @defininfoenclose.
-\let\definfoenclose=\comment
-
-
-\message{indexing,}
-% Index generation facilities
-
-% Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within macros and \if's.
-\edef\newwrite{\makecsname{ptexnewwrite}}
-
-% \newindex {foo} defines an index named foo.
-% It automatically defines \fooindex such that
-% \fooindex ...rest of line... puts an entry in the index foo.
-% It also defines \fooindfile to be the number of the output channel for
-% the file that accumulates this index. The file's extension is foo.
-% The name of an index should be no more than 2 characters long
-% for the sake of vms.
-%
-\def\newindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
- \fi
- \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
- \noexpand\doindex{#1}}
-}
-
-% @defindex foo == \newindex{foo}
-%
-\def\defindex{\parsearg\newindex}
-
-% Define @defcodeindex, like @defindex except put all entries in @code.
-%
-\def\defcodeindex{\parsearg\newcodeindex}
-%
-\def\newcodeindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1
- \fi
- \expandafter\xdef\csname#1index\endcsname{%
- \noexpand\docodeindex{#1}}%
-}
-
-
-% @synindex foo bar makes index foo feed into index bar.
-% Do this instead of @defindex foo if you don't want it as a separate index.
-%
-% @syncodeindex foo bar similar, but put all entries made for index foo
-% inside @code.
-%
-\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
-\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
-
-% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
-% #3 the target index (bar).
-\def\dosynindex#1#2#3{%
- % Only do \closeout if we haven't already done it, else we'll end up
- % closing the target index.
- \expandafter \ifx\csname donesynindex#2\endcsname \undefined
- % The \closeout helps reduce unnecessary open files; the limit on the
- % Acorn RISC OS is a mere 16 files.
- \expandafter\closeout\csname#2indfile\endcsname
- \expandafter\let\csname\donesynindex#2\endcsname = 1
- \fi
- % redefine \fooindfile:
- \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
- \expandafter\let\csname#2indfile\endcsname=\temp
- % redefine \fooindex:
- \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
-}
-
-% Define \doindex, the driver for all \fooindex macros.
-% Argument #1 is generated by the calling \fooindex macro,
-% and it is "foo", the name of the index.
-
-% \doindex just uses \parsearg; it calls \doind for the actual work.
-% This is because \doind is more useful to call from other macros.
-
-% There is also \dosubind {index}{topic}{subtopic}
-% which makes an entry in a two-level index such as the operation index.
-
-\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
-\def\singleindexer #1{\doind{\indexname}{#1}}
-
-% like the previous two, but they put @code around the argument.
-\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
-\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
-
-% Take care of Texinfo commands that can appear in an index entry.
-% Since there are some commands we want to expand, and others we don't,
-% we have to laboriously prevent expansion for those that we don't.
-%
-\def\indexdummies{%
- \def\@{@}% change to @@ when we switch to @ as escape char in index files.
- \def\ {\realbackslash\space }%
- % Need these in case \tex is in effect and \{ is a \delimiter again.
- % But can't use \lbracecmd and \rbracecmd because texindex assumes
- % braces and backslashes are used only as delimiters.
- \let\{ = \mylbrace
- \let\} = \myrbrace
- %
- % \definedummyword defines \#1 as \realbackslash #1\space, thus
- % effectively preventing its expansion. This is used only for control
- % words, not control letters, because the \space would be incorrect
- % for control characters, but is needed to separate the control word
- % from whatever follows.
- %
- % For control letters, we have \definedummyletter, which omits the
- % space.
- %
- % These can be used both for control words that take an argument and
- % those that do not. If it is followed by {arg} in the input, then
- % that will dutifully get written to the index (or wherever).
- %
- \def\definedummyword##1{%
- \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}%
- }%
- \def\definedummyletter##1{%
- \expandafter\def\csname ##1\endcsname{\realbackslash ##1}%
- }%
- \let\definedummyaccent\definedummyletter
- %
- % Do the redefinitions.
- \commondummies
-}
-
-% For the aux and toc files, @ is the escape character. So we want to
-% redefine everything using @ as the escape character (instead of
-% \realbackslash, still used for index files). When everything uses @,
-% this will be simpler.
-%
-\def\atdummies{%
- \def\@{@@}%
- \def\ {@ }%
- \let\{ = \lbraceatcmd
- \let\} = \rbraceatcmd
- %
- % (See comments in \indexdummies.)
- \def\definedummyword##1{%
- \expandafter\def\csname ##1\endcsname{@##1\space}%
- }%
- \def\definedummyletter##1{%
- \expandafter\def\csname ##1\endcsname{@##1}%
- }%
- \let\definedummyaccent\definedummyletter
- %
- % Do the redefinitions.
- \commondummies
-}
-
-% Called from \indexdummies and \atdummies. \definedummyword and
-% \definedummyletter must be defined first.
-%
-\def\commondummies{%
- %
- \normalturnoffactive
- %
- \commondummiesnofonts
- %
- \definedummyletter{_}%
- %
- % Non-English letters.
- \definedummyword{AA}%
- \definedummyword{AE}%
- \definedummyword{L}%
- \definedummyword{OE}%
- \definedummyword{O}%
- \definedummyword{aa}%
- \definedummyword{ae}%
- \definedummyword{l}%
- \definedummyword{oe}%
- \definedummyword{o}%
- \definedummyword{ss}%
- \definedummyword{exclamdown}%
- \definedummyword{questiondown}%
- \definedummyword{ordf}%
- \definedummyword{ordm}%
- %
- % Although these internal commands shouldn't show up, sometimes they do.
- \definedummyword{bf}%
- \definedummyword{gtr}%
- \definedummyword{hat}%
- \definedummyword{less}%
- \definedummyword{sf}%
- \definedummyword{sl}%
- \definedummyword{tclose}%
- \definedummyword{tt}%
- %
- \definedummyword{LaTeX}%
- \definedummyword{TeX}%
- %
- % Assorted special characters.
- \definedummyword{bullet}%
- \definedummyword{comma}%
- \definedummyword{copyright}%
- \definedummyword{registeredsymbol}%
- \definedummyword{dots}%
- \definedummyword{enddots}%
- \definedummyword{equiv}%
- \definedummyword{error}%
- \definedummyword{euro}%
- \definedummyword{expansion}%
- \definedummyword{minus}%
- \definedummyword{pounds}%
- \definedummyword{point}%
- \definedummyword{print}%
- \definedummyword{result}%
- %
- % Handle some cases of @value -- where it does not contain any
- % (non-fully-expandable) commands.
- \makevalueexpandable
- %
- % Normal spaces, not active ones.
- \unsepspaces
- %
- % No macro expansion.
- \turnoffmacros
-}
-
-% \commondummiesnofonts: common to \commondummies and \indexnofonts.
-%
-% Better have this without active chars.
-{
- \catcode`\~=\other
- \gdef\commondummiesnofonts{%
- % Control letters and accents.
- \definedummyletter{!}%
- \definedummyaccent{"}%
- \definedummyaccent{'}%
- \definedummyletter{*}%
- \definedummyaccent{,}%
- \definedummyletter{.}%
- \definedummyletter{/}%
- \definedummyletter{:}%
- \definedummyaccent{=}%
- \definedummyletter{?}%
- \definedummyaccent{^}%
- \definedummyaccent{`}%
- \definedummyaccent{~}%
- \definedummyword{u}%
- \definedummyword{v}%
- \definedummyword{H}%
- \definedummyword{dotaccent}%
- \definedummyword{ringaccent}%
- \definedummyword{tieaccent}%
- \definedummyword{ubaraccent}%
- \definedummyword{udotaccent}%
- \definedummyword{dotless}%
- %
- % Texinfo font commands.
- \definedummyword{b}%
- \definedummyword{i}%
- \definedummyword{r}%
- \definedummyword{sc}%
- \definedummyword{t}%
- %
- % Commands that take arguments.
- \definedummyword{acronym}%
- \definedummyword{cite}%
- \definedummyword{code}%
- \definedummyword{command}%
- \definedummyword{dfn}%
- \definedummyword{emph}%
- \definedummyword{env}%
- \definedummyword{file}%
- \definedummyword{kbd}%
- \definedummyword{key}%
- \definedummyword{math}%
- \definedummyword{option}%
- \definedummyword{samp}%
- \definedummyword{strong}%
- \definedummyword{tie}%
- \definedummyword{uref}%
- \definedummyword{url}%
- \definedummyword{var}%
- \definedummyword{verb}%
- \definedummyword{w}%
- }
-}
-
-% \indexnofonts is used when outputting the strings to sort the index
-% by, and when constructing control sequence names. It eliminates all
-% control sequences and just writes whatever the best ASCII sort string
-% would be for a given command (usually its argument).
-%
-\def\indexnofonts{%
- % Accent commands should become @asis.
- \def\definedummyaccent##1{%
- \expandafter\let\csname ##1\endcsname\asis
- }%
- % We can just ignore other control letters.
- \def\definedummyletter##1{%
- \expandafter\def\csname ##1\endcsname{}%
- }%
- % Hopefully, all control words can become @asis.
- \let\definedummyword\definedummyaccent
- %
- \commondummiesnofonts
- %
- % Don't no-op \tt, since it isn't a user-level command
- % and is used in the definitions of the active chars like <, >, |, etc.
- % Likewise with the other plain tex font commands.
- %\let\tt=\asis
- %
- \def\ { }%
- \def\@{@}%
- % how to handle braces?
- \def\_{\normalunderscore}%
- %
- % Non-English letters.
- \def\AA{AA}%
- \def\AE{AE}%
- \def\L{L}%
- \def\OE{OE}%
- \def\O{O}%
- \def\aa{aa}%
- \def\ae{ae}%
- \def\l{l}%
- \def\oe{oe}%
- \def\o{o}%
- \def\ss{ss}%
- \def\exclamdown{!}%
- \def\questiondown{?}%
- \def\ordf{a}%
- \def\ordm{o}%
- %
- \def\LaTeX{LaTeX}%
- \def\TeX{TeX}%
- %
- % Assorted special characters.
- % (The following {} will end up in the sort string, but that's ok.)
- \def\bullet{bullet}%
- \def\comma{,}%
- \def\copyright{copyright}%
- \def\registeredsymbol{R}%
- \def\dots{...}%
- \def\enddots{...}%
- \def\equiv{==}%
- \def\error{error}%
- \def\euro{euro}%
- \def\expansion{==>}%
- \def\minus{-}%
- \def\pounds{pounds}%
- \def\point{.}%
- \def\print{-|}%
- \def\result{=>}%
- %
- % Don't write macro names.
- \emptyusermacros
-}
-
-\let\indexbackslash=0 %overridden during \printindex.
-\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
-
-% Most index entries go through here, but \dosubind is the general case.
-% #1 is the index name, #2 is the entry text.
-\def\doind#1#2{\dosubind{#1}{#2}{}}
-
-% Workhorse for all \fooindexes.
-% #1 is name of index, #2 is stuff to put there, #3 is subentry --
-% empty if called from \doind, as we usually are (the main exception
-% is with most defuns, which call us directly).
-%
-\def\dosubind#1#2#3{%
- \iflinks
- {%
- % Store the main index entry text (including the third arg).
- \toks0 = {#2}%
- % If third arg is present, precede it with a space.
- \def\thirdarg{#3}%
- \ifx\thirdarg\empty \else
- \toks0 = \expandafter{\the\toks0 \space #3}%
- \fi
- %
- \edef\writeto{\csname#1indfile\endcsname}%
- %
- \ifvmode
- \dosubindsanitize
- \else
- \dosubindwrite
- \fi
- }%
- \fi
-}
-
-% Write the entry in \toks0 to the index file:
-%
-\def\dosubindwrite{%
- % Put the index entry in the margin if desired.
- \ifx\SETmarginindex\relax\else
- \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
- \fi
- %
- % Remember, we are within a group.
- \indexdummies % Must do this here, since \bf, etc expand at this stage
- \escapechar=`\\
- \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
- % so it will be output as is; and it will print as backslash.
- %
- % Process the index entry with all font commands turned off, to
- % get the string to sort by.
- {\indexnofonts
- \edef\temp{\the\toks0}% need full expansion
- \xdef\indexsorttmp{\temp}%
- }%
- %
- % Set up the complete index entry, with both the sort key and
- % the original text, including any font commands. We write
- % three arguments to \entry to the .?? file (four in the
- % subentry case), texindex reduces to two when writing the .??s
- % sorted result.
- \edef\temp{%
- \write\writeto{%
- \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
- }%
- \temp
-}
-
-% Take care of unwanted page breaks:
-%
-% If a skip is the last thing on the list now, preserve it
-% by backing up by \lastskip, doing the \write, then inserting
-% the skip again. Otherwise, the whatsit generated by the
-% \write will make \lastskip zero. The result is that sequences
-% like this:
-% @end defun
-% @tindex whatever
-% @defun ...
-% will have extra space inserted, because the \medbreak in the
-% start of the @defun won't see the skip inserted by the @end of
-% the previous defun.
-%
-% But don't do any of this if we're not in vertical mode. We
-% don't want to do a \vskip and prematurely end a paragraph.
-%
-% Avoid page breaks due to these extra skips, too.
-%
-% But wait, there is a catch there:
-% We'll have to check whether \lastskip is zero skip. \ifdim is not
-% sufficient for this purpose, as it ignores stretch and shrink parts
-% of the skip. The only way seems to be to check the textual
-% representation of the skip.
-%
-% The following is almost like \def\zeroskipmacro{0.0pt} except that
-% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
-%
-\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
-%
-% ..., ready, GO:
-%
-\def\dosubindsanitize{%
- % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
- \skip0 = \lastskip
- \edef\lastskipmacro{\the\lastskip}%
- \count255 = \lastpenalty
- %
- % If \lastskip is nonzero, that means the last item was a
- % skip. And since a skip is discardable, that means this
- % -\skip0 glue we're inserting is preceded by a
- % non-discardable item, therefore it is not a potential
- % breakpoint, therefore no \nobreak needed.
- \ifx\lastskipmacro\zeroskipmacro
- \else
- \vskip-\skip0
- \fi
- %
- \dosubindwrite
- %
- \ifx\lastskipmacro\zeroskipmacro
- % If \lastskip was zero, perhaps the last item was a penalty, and
- % perhaps it was >=10000, e.g., a \nobreak. In that case, we want
- % to re-insert the same penalty (values >10000 are used for various
- % signals); since we just inserted a non-discardable item, any
- % following glue (such as a \parskip) would be a breakpoint. For example:
- %
- % @deffn deffn-whatever
- % @vindex index-whatever
- % Description.
- % would allow a break between the index-whatever whatsit
- % and the "Description." paragraph.
- \ifnum\count255>9999 \penalty\count255 \fi
- \else
- % On the other hand, if we had a nonzero \lastskip,
- % this make-up glue would be preceded by a non-discardable item
- % (the whatsit from the \write), so we must insert a \nobreak.
- \nobreak\vskip\skip0
- \fi
-}
-
-% The index entry written in the file actually looks like
-% \entry {sortstring}{page}{topic}
-% or
-% \entry {sortstring}{page}{topic}{subtopic}
-% The texindex program reads in these files and writes files
-% containing these kinds of lines:
-% \initial {c}
-% before the first topic whose initial is c
-% \entry {topic}{pagelist}
-% for a topic that is used without subtopics
-% \primary {topic}
-% for the beginning of a topic that is used with subtopics
-% \secondary {subtopic}{pagelist}
-% for each subtopic.
-
-% Define the user-accessible indexing commands
-% @findex, @vindex, @kindex, @cindex.
-
-\def\findex {\fnindex}
-\def\kindex {\kyindex}
-\def\cindex {\cpindex}
-\def\vindex {\vrindex}
-\def\tindex {\tpindex}
-\def\pindex {\pgindex}
-
-\def\cindexsub {\begingroup\obeylines\cindexsub}
-{\obeylines %
-\gdef\cindexsub "#1" #2^^M{\endgroup %
-\dosubind{cp}{#2}{#1}}}
-
-% Define the macros used in formatting output of the sorted index material.
-
-% @printindex causes a particular index (the ??s file) to get printed.
-% It does not print any chapter heading (usually an @unnumbered).
-%
-\parseargdef\printindex{\begingroup
- \dobreak \chapheadingskip{10000}%
- %
- \smallfonts \rm
- \tolerance = 9500
- \everypar = {}% don't want the \kern\-parindent from indentation suppression.
- %
- % See if the index file exists and is nonempty.
- % Change catcode of @ here so that if the index file contains
- % \initial {@}
- % as its first line, TeX doesn't complain about mismatched braces
- % (because it thinks @} is a control sequence).
- \catcode`\@ = 11
- \openin 1 \jobname.#1s
- \ifeof 1
- % \enddoublecolumns gets confused if there is no text in the index,
- % and it loses the chapter title and the aux file entries for the
- % index. The easiest way to prevent this problem is to make sure
- % there is some text.
- \putwordIndexNonexistent
- \else
- %
- % If the index file exists but is empty, then \openin leaves \ifeof
- % false. We have to make TeX try to read something from the file, so
- % it can discover if there is anything in it.
- \read 1 to \temp
- \ifeof 1
- \putwordIndexIsEmpty
- \else
- % Index files are almost Texinfo source, but we use \ as the escape
- % character. It would be better to use @, but that's too big a change
- % to make right now.
- \def\indexbackslash{\backslashcurfont}%
- \catcode`\\ = 0
- \escapechar = `\\
- \begindoublecolumns
- \input \jobname.#1s
- \enddoublecolumns
- \fi
- \fi
- \closein 1
-\endgroup}
-
-% These macros are used by the sorted index file itself.
-% Change them to control the appearance of the index.
-
-\def\initial#1{{%
- % Some minor font changes for the special characters.
- \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
- %
- % Remove any glue we may have, we'll be inserting our own.
- \removelastskip
- %
- % We like breaks before the index initials, so insert a bonus.
- \nobreak
- \vskip 0pt plus 3\baselineskip
- \penalty 0
- \vskip 0pt plus -3\baselineskip
- %
- % Typeset the initial. Making this add up to a whole number of
- % baselineskips increases the chance of the dots lining up from column
- % to column. It still won't often be perfect, because of the stretch
- % we need before each entry, but it's better.
- %
- % No shrink because it confuses \balancecolumns.
- \vskip 1.67\baselineskip plus .5\baselineskip
- \leftline{\secbf #1}%
- % Do our best not to break after the initial.
- \nobreak
- \vskip .33\baselineskip plus .1\baselineskip
-}}
-
-% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
-% then page number (#2) flushed to the right margin. It is used for index
-% and table of contents entries. The paragraph is indented by \leftskip.
-%
-% A straightforward implementation would start like this:
-% \def\entry#1#2{...
-% But this frozes the catcodes in the argument, and can cause problems to
-% @code, which sets - active. This problem was fixed by a kludge---
-% ``-'' was active throughout whole index, but this isn't really right.
-%
-% The right solution is to prevent \entry from swallowing the whole text.
-% --kasal, 21nov03
-\def\entry{%
- \begingroup
- %
- % Start a new paragraph if necessary, so our assignments below can't
- % affect previous text.
- \par
- %
- % Do not fill out the last line with white space.
- \parfillskip = 0in
- %
- % No extra space above this paragraph.
- \parskip = 0in
- %
- % Do not prefer a separate line ending with a hyphen to fewer lines.
- \finalhyphendemerits = 0
- %
- % \hangindent is only relevant when the entry text and page number
- % don't both fit on one line. In that case, bob suggests starting the
- % dots pretty far over on the line. Unfortunately, a large
- % indentation looks wrong when the entry text itself is broken across
- % lines. So we use a small indentation and put up with long leaders.
- %
- % \hangafter is reset to 1 (which is the value we want) at the start
- % of each paragraph, so we need not do anything with that.
- \hangindent = 2em
- %
- % When the entry text needs to be broken, just fill out the first line
- % with blank space.
- \rightskip = 0pt plus1fil
- %
- % A bit of stretch before each entry for the benefit of balancing
- % columns.
- \vskip 0pt plus1pt
- %
- % Swallow the left brace of the text (first parameter):
- \afterassignment\doentry
- \let\temp =
-}
-\def\doentry{%
- \bgroup % Instead of the swallowed brace.
- \noindent
- \aftergroup\finishentry
- % And now comes the text of the entry.
-}
-\def\finishentry#1{%
- % #1 is the page number.
- %
- % The following is kludged to not output a line of dots in the index if
- % there are no page numbers. The next person who breaks this will be
- % cursed by a Unix daemon.
- \def\tempa{{\rm }}%
- \def\tempb{#1}%
- \edef\tempc{\tempa}%
- \edef\tempd{\tempb}%
- \ifx\tempc\tempd
- \ %
- \else
- %
- % If we must, put the page number on a line of its own, and fill out
- % this line with blank space. (The \hfil is overwhelmed with the
- % fill leaders glue in \indexdotfill if the page number does fit.)
- \hfil\penalty50
- \null\nobreak\indexdotfill % Have leaders before the page number.
- %
- % The `\ ' here is removed by the implicit \unskip that TeX does as
- % part of (the primitive) \par. Without it, a spurious underfull
- % \hbox ensues.
- \ifpdf
- \pdfgettoks#1.%
- \ \the\toksA
- \else
- \ #1%
- \fi
- \fi
- \par
- \endgroup
-}
-
-% Like \dotfill except takes at least 1 em.
-\def\indexdotfill{\cleaders
- \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
-
-\def\primary #1{\line{#1\hfil}}
-
-\newskip\secondaryindent \secondaryindent=0.5cm
-\def\secondary#1#2{{%
- \parfillskip=0in
- \parskip=0in
- \hangindent=1in
- \hangafter=1
- \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
- \ifpdf
- \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
- \else
- #2
- \fi
- \par
-}}
-
-% Define two-column mode, which we use to typeset indexes.
-% Adapted from the TeXbook, page 416, which is to say,
-% the manmac.tex format used to print the TeXbook itself.
-\catcode`\@=11
-
-\newbox\partialpage
-\newdimen\doublecolumnhsize
-
-\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
- % Grab any single-column material above us.
- \output = {%
- %
- % Here is a possibility not foreseen in manmac: if we accumulate a
- % whole lot of material, we might end up calling this \output
- % routine twice in a row (see the doublecol-lose test, which is
- % essentially a couple of indexes with @setchapternewpage off). In
- % that case we just ship out what is in \partialpage with the normal
- % output routine. Generally, \partialpage will be empty when this
- % runs and this will be a no-op. See the indexspread.tex test case.
- \ifvoid\partialpage \else
- \onepageout{\pagecontents\partialpage}%
- \fi
- %
- \global\setbox\partialpage = \vbox{%
- % Unvbox the main output page.
- \unvbox\PAGE
- \kern-\topskip \kern\baselineskip
- }%
- }%
- \eject % run that output routine to set \partialpage
- %
- % Use the double-column output routine for subsequent pages.
- \output = {\doublecolumnout}%
- %
- % Change the page size parameters. We could do this once outside this
- % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
- % format, but then we repeat the same computation. Repeating a couple
- % of assignments once per index is clearly meaningless for the
- % execution time, so we may as well do it in one place.
- %
- % First we halve the line length, less a little for the gutter between
- % the columns. We compute the gutter based on the line length, so it
- % changes automatically with the paper format. The magic constant
- % below is chosen so that the gutter has the same value (well, +-<1pt)
- % as it did when we hard-coded it.
- %
- % We put the result in a separate register, \doublecolumhsize, so we
- % can restore it in \pagesofar, after \hsize itself has (potentially)
- % been clobbered.
- %
- \doublecolumnhsize = \hsize
- \advance\doublecolumnhsize by -.04154\hsize
- \divide\doublecolumnhsize by 2
- \hsize = \doublecolumnhsize
- %
- % Double the \vsize as well. (We don't need a separate register here,
- % since nobody clobbers \vsize.)
- \vsize = 2\vsize
-}
-
-% The double-column output routine for all double-column pages except
-% the last.
-%
-\def\doublecolumnout{%
- \splittopskip=\topskip \splitmaxdepth=\maxdepth
- % Get the available space for the double columns -- the normal
- % (undoubled) page height minus any material left over from the
- % previous page.
- \dimen@ = \vsize
- \divide\dimen@ by 2
- \advance\dimen@ by -\ht\partialpage
- %
- % box0 will be the left-hand column, box2 the right.
- \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
- \onepageout\pagesofar
- \unvbox255
- \penalty\outputpenalty
-}
-%
-% Re-output the contents of the output page -- any previous material,
-% followed by the two boxes we just split, in box0 and box2.
-\def\pagesofar{%
- \unvbox\partialpage
- %
- \hsize = \doublecolumnhsize
- \wd0=\hsize \wd2=\hsize
- \hbox to\pagewidth{\box0\hfil\box2}%
-}
-%
-% All done with double columns.
-\def\enddoublecolumns{%
- \output = {%
- % Split the last of the double-column material. Leave it on the
- % current page, no automatic page break.
- \balancecolumns
- %
- % If we end up splitting too much material for the current page,
- % though, there will be another page break right after this \output
- % invocation ends. Having called \balancecolumns once, we do not
- % want to call it again. Therefore, reset \output to its normal
- % definition right away. (We hope \balancecolumns will never be
- % called on to balance too much material, but if it is, this makes
- % the output somewhat more palatable.)
- \global\output = {\onepageout{\pagecontents\PAGE}}%
- }%
- \eject
- \endgroup % started in \begindoublecolumns
- %
- % \pagegoal was set to the doubled \vsize above, since we restarted
- % the current page. We're now back to normal single-column
- % typesetting, so reset \pagegoal to the normal \vsize (after the
- % \endgroup where \vsize got restored).
- \pagegoal = \vsize
-}
-%
-% Called at the end of the double column material.
-\def\balancecolumns{%
- \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
- \dimen@ = \ht0
- \advance\dimen@ by \topskip
- \advance\dimen@ by-\baselineskip
- \divide\dimen@ by 2 % target to split to
- %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
- \splittopskip = \topskip
- % Loop until we get a decent breakpoint.
- {%
- \vbadness = 10000
- \loop
- \global\setbox3 = \copy0
- \global\setbox1 = \vsplit3 to \dimen@
- \ifdim\ht3>\dimen@
- \global\advance\dimen@ by 1pt
- \repeat
- }%
- %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
- \setbox0=\vbox to\dimen@{\unvbox1}%
- \setbox2=\vbox to\dimen@{\unvbox3}%
- %
- \pagesofar
-}
-\catcode`\@ = \other
-
-
-\message{sectioning,}
-% Chapters, sections, etc.
-
-% \unnumberedno is an oxymoron, of course. But we count the unnumbered
-% sections so that we can refer to them unambiguously in the pdf
-% outlines by their "section number". We avoid collisions with chapter
-% numbers by starting them at 10000. (If a document ever has 10000
-% chapters, we're in trouble anyway, I'm sure.)
-\newcount\unnumberedno \unnumberedno = 10000
-\newcount\chapno
-\newcount\secno \secno=0
-\newcount\subsecno \subsecno=0
-\newcount\subsubsecno \subsubsecno=0
-
-% This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount\appendixno \appendixno = `\@
-%
-% \def\appendixletter{\char\the\appendixno}
-% We do the following ugly conditional instead of the above simple
-% construct for the sake of pdftex, which needs the actual
-% letter in the expansion, not just typeset.
-%
-\def\appendixletter{%
- \ifnum\appendixno=`A A%
- \else\ifnum\appendixno=`B B%
- \else\ifnum\appendixno=`C C%
- \else\ifnum\appendixno=`D D%
- \else\ifnum\appendixno=`E E%
- \else\ifnum\appendixno=`F F%
- \else\ifnum\appendixno=`G G%
- \else\ifnum\appendixno=`H H%
- \else\ifnum\appendixno=`I I%
- \else\ifnum\appendixno=`J J%
- \else\ifnum\appendixno=`K K%
- \else\ifnum\appendixno=`L L%
- \else\ifnum\appendixno=`M M%
- \else\ifnum\appendixno=`N N%
- \else\ifnum\appendixno=`O O%
- \else\ifnum\appendixno=`P P%
- \else\ifnum\appendixno=`Q Q%
- \else\ifnum\appendixno=`R R%
- \else\ifnum\appendixno=`S S%
- \else\ifnum\appendixno=`T T%
- \else\ifnum\appendixno=`U U%
- \else\ifnum\appendixno=`V V%
- \else\ifnum\appendixno=`W W%
- \else\ifnum\appendixno=`X X%
- \else\ifnum\appendixno=`Y Y%
- \else\ifnum\appendixno=`Z Z%
- % The \the is necessary, despite appearances, because \appendixletter is
- % expanded while writing the .toc file. \char\appendixno is not
- % expandable, thus it is written literally, thus all appendixes come out
- % with the same letter (or @) in the toc without it.
- \else\char\the\appendixno
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
-
-% Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it. @section does likewise.
-% However, they are not reliable, because we don't use marks.
-\def\thischapter{}
-\def\thissection{}
-
-\newcount\absseclevel % used to calculate proper heading level
-\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
-
-% @raisesections: treat @section as chapter, @subsection as section, etc.
-\def\raisesections{\global\advance\secbase by -1}
-\let\up=\raisesections % original BFox name
-
-% @lowersections: treat @chapter as section, @section as subsection, etc.
-\def\lowersections{\global\advance\secbase by 1}
-\let\down=\lowersections % original BFox name
-
-% we only have subsub.
-\chardef\maxseclevel = 3
-%
-% A numbered section within an unnumbered changes to unnumbered too.
-% To achive this, remember the "biggest" unnum. sec. we are currently in:
-\chardef\unmlevel = \maxseclevel
-%
-% Trace whether the current chapter is an appendix or not:
-% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
-\def\chapheadtype{N}
-
-% Choose a heading macro
-% #1 is heading type
-% #2 is heading level
-% #3 is text for heading
-\def\genhead#1#2#3{%
- % Compute the abs. sec. level:
- \absseclevel=#2
- \advance\absseclevel by \secbase
- % Make sure \absseclevel doesn't fall outside the range:
- \ifnum \absseclevel < 0
- \absseclevel = 0
- \else
- \ifnum \absseclevel > 3
- \absseclevel = 3
- \fi
- \fi
- % The heading type:
- \def\headtype{#1}%
- \if \headtype U%
- \ifnum \absseclevel < \unmlevel
- \chardef\unmlevel = \absseclevel
- \fi
- \else
- % Check for appendix sections:
- \ifnum \absseclevel = 0
- \edef\chapheadtype{\headtype}%
- \else
- \if \headtype A\if \chapheadtype N%
- \errmessage{@appendix... within a non-appendix chapter}%
- \fi\fi
- \fi
- % Check for numbered within unnumbered:
- \ifnum \absseclevel > \unmlevel
- \def\headtype{U}%
- \else
- \chardef\unmlevel = 3
- \fi
- \fi
- % Now print the heading:
- \if \headtype U%
- \ifcase\absseclevel
- \unnumberedzzz{#3}%
- \or \unnumberedseczzz{#3}%
- \or \unnumberedsubseczzz{#3}%
- \or \unnumberedsubsubseczzz{#3}%
- \fi
- \else
- \if \headtype A%
- \ifcase\absseclevel
- \appendixzzz{#3}%
- \or \appendixsectionzzz{#3}%
- \or \appendixsubseczzz{#3}%
- \or \appendixsubsubseczzz{#3}%
- \fi
- \else
- \ifcase\absseclevel
- \chapterzzz{#3}%
- \or \seczzz{#3}%
- \or \numberedsubseczzz{#3}%
- \or \numberedsubsubseczzz{#3}%
- \fi
- \fi
- \fi
- \suppressfirstparagraphindent
-}
-
-% an interface:
-\def\numhead{\genhead N}
-\def\apphead{\genhead A}
-\def\unnmhead{\genhead U}
-
-% @chapter, @appendix, @unnumbered. Increment top-level counter, reset
-% all lower-level sectioning counters to zero.
-%
-% Also set \chaplevelprefix, which we prepend to @float sequence numbers
-% (e.g., figures), q.v. By default (before any chapter), that is empty.
-\let\chaplevelprefix = \empty
-%
-\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz#1{%
- % section resetting is \global in case the chapter is in a group, such
- % as an @include file.
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\chapno by 1
- %
- % Used for \float.
- \gdef\chaplevelprefix{\the\chapno.}%
- \resetallfloatnos
- %
- \message{\putwordChapter\space \the\chapno}%
- %
- % Write the actual heading.
- \chapmacro{#1}{Ynumbered}{\the\chapno}%
- %
- % So @section and the like are numbered underneath this chapter.
- \global\let\section = \numberedsec
- \global\let\subsection = \numberedsubsec
- \global\let\subsubsection = \numberedsubsubsec
-}
-
-\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
-\def\appendixzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\appendixno by 1
- \gdef\chaplevelprefix{\appendixletter.}%
- \resetallfloatnos
- %
- \def\appendixnum{\putwordAppendix\space \appendixletter}%
- \message{\appendixnum}%
- %
- \chapmacro{#1}{Yappendix}{\appendixletter}%
- %
- \global\let\section = \appendixsec
- \global\let\subsection = \appendixsubsec
- \global\let\subsubsection = \appendixsubsubsec
-}
-
-\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
-\def\unnumberedzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\unnumberedno by 1
- %
- % Since an unnumbered has no number, no prefix for figures.
- \global\let\chaplevelprefix = \empty
- \resetallfloatnos
- %
- % This used to be simply \message{#1}, but TeX fully expands the
- % argument to \message. Therefore, if #1 contained @-commands, TeX
- % expanded them. For example, in `@unnumbered The @cite{Book}', TeX
- % expanded @cite (which turns out to cause errors because \cite is meant
- % to be executed, not expanded).
- %
- % Anyway, we don't want the fully-expanded definition of @cite to appear
- % as a result of the \message, we just want `@cite' itself. We use
- % \the<toks register> to achieve this: TeX expands \the<toks> only once,
- % simply yielding the contents of <toks register>. (We also do this for
- % the toc entries.)
- \toks0 = {#1}%
- \message{(\the\toks0)}%
- %
- \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
- %
- \global\let\section = \unnumberedsec
- \global\let\subsection = \unnumberedsubsec
- \global\let\subsubsection = \unnumberedsubsubsec
-}
-
-% @centerchap is like @unnumbered, but the heading is centered.
-\outer\parseargdef\centerchap{%
- % Well, we could do the following in a group, but that would break
- % an assumption that \chapmacro is called at the outermost level.
- % Thus we are safer this way: --kasal, 24feb04
- \let\centerparametersmaybe = \centerparameters
- \unnmhead0{#1}%
- \let\centerparametersmaybe = \relax
-}
-
-% @top is like @unnumbered.
-\let\top\unnumbered
-
-% Sections.
-\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
-\def\seczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
-}
-
-\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz
-\def\appendixsectionzzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
-}
-\let\appendixsec\appendixsection
-
-\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz
-\def\unnumberedseczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
-}
-
-% Subsections.
-\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz
-\def\numberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
-}
-
-\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz
-\def\appendixsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Yappendix}%
- {\appendixletter.\the\secno.\the\subsecno}%
-}
-
-\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
-\def\unnumberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno}%
-}
-
-% Subsubsections.
-\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz
-\def\numberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Ynumbered}%
- {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz
-\def\appendixsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Yappendix}%
- {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
-\def\unnumberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-% These macros control what the section commands do, according
-% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
-% Define them by default for a numbered chapter.
-\let\section = \numberedsec
-\let\subsection = \numberedsubsec
-\let\subsubsection = \numberedsubsubsec
-
-% Define @majorheading, @heading and @subheading
-
-% NOTE on use of \vbox for chapter headings, section headings, and such:
-% 1) We use \vbox rather than the earlier \line to permit
-% overlong headings to fold.
-% 2) \hyphenpenalty is set to 10000 because hyphenation in a
-% heading is obnoxious; this forbids it.
-% 3) Likewise, headings look best if no \parindent is used, and
-% if justification is not attempted. Hence \raggedright.
-
-
-\def\majorheading{%
- {\advance\chapheadingskip by 10pt \chapbreak }%
- \parsearg\chapheadingzzz
-}
-
-\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
-\def\chapheadingzzz#1{%
- {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}%
- \bigskip \par\penalty 200\relax
- \suppressfirstparagraphindent
-}
-
-% @heading, @subheading, @subsubheading.
-\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-
-% These macros generate a chapter, section, etc. heading only
-% (including whitespace, linebreaking, etc. around it),
-% given all the information in convenient, parsed form.
-
-%%% Args are the skip and penalty (usually negative)
-\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
-
-%%% Define plain chapter starts, and page on/off switching for it
-% Parameter controlling skip before chapter headings (if needed)
-
-\newskip\chapheadingskip
-
-\def\chapbreak{\dobreak \chapheadingskip {-4000}}
-\def\chappager{\par\vfill\supereject}
-\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
-
-\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
-
-\def\CHAPPAGoff{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chapbreak
-\global\let\pagealignmacro=\chappager}
-
-\def\CHAPPAGon{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chappager
-\global\let\pagealignmacro=\chappager
-\global\def\HEADINGSon{\HEADINGSsingle}}
-
-\def\CHAPPAGodd{%
-\global\let\contentsalignmacro = \chapoddpage
-\global\let\pchapsepmacro=\chapoddpage
-\global\let\pagealignmacro=\chapoddpage
-\global\def\HEADINGSon{\HEADINGSdouble}}
-
-\CHAPPAGon
-
-% Chapter opening.
-%
-% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
-% Yappendix, Yomitfromtoc), #3 the chapter number.
-%
-% To test against our argument.
-\def\Ynothingkeyword{Ynothing}
-\def\Yomitfromtockeyword{Yomitfromtoc}
-\def\Yappendixkeyword{Yappendix}
-%
-\def\chapmacro#1#2#3{%
- \pchapsepmacro
- {%
- \chapfonts \rm
- %
- % Have to define \thissection before calling \donoderef, because the
- % xref code eventually uses it. On the other hand, it has to be called
- % after \pchapsepmacro, or the headline will change too soon.
- \gdef\thissection{#1}%
- \gdef\thischaptername{#1}%
- %
- % Only insert the separating space if we have a chapter/appendix
- % number, and don't print the unnumbered ``number''.
- \def\temptype{#2}%
- \ifx\temptype\Ynothingkeyword
- \setbox0 = \hbox{}%
- \def\toctype{unnchap}%
- \gdef\thischapter{#1}%
- \else\ifx\temptype\Yomitfromtockeyword
- \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
- \def\toctype{omit}%
- \gdef\thischapter{}%
- \else\ifx\temptype\Yappendixkeyword
- \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
- \def\toctype{app}%
- % We don't substitute the actual chapter name into \thischapter
- % because we don't want its macros evaluated now. And we don't
- % use \thissection because that changes with each section.
- %
- \xdef\thischapter{\putwordAppendix{} \appendixletter:
- \noexpand\thischaptername}%
- \else
- \setbox0 = \hbox{#3\enspace}%
- \def\toctype{numchap}%
- \xdef\thischapter{\putwordChapter{} \the\chapno:
- \noexpand\thischaptername}%
- \fi\fi\fi
- %
- % Write the toc entry for this chapter. Must come before the
- % \donoderef, because we include the current node name in the toc
- % entry, and \donoderef resets it to empty.
- \writetocentry{\toctype}{#1}{#3}%
- %
- % For pdftex, we have to write out the node definition (aka, make
- % the pdfdest) after any page break, but before the actual text has
- % been typeset. If the destination for the pdf outline is after the
- % text, then jumping from the outline may wind up with the text not
- % being visible, for instance under high magnification.
- \donoderef{#2}%
- %
- % Typeset the actual heading.
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
- \hangindent=\wd0 \centerparametersmaybe
- \unhbox0 #1\par}%
- }%
- \nobreak\bigskip % no page break after a chapter title
- \nobreak
-}
-
-% @centerchap -- centered and unnumbered.
-\let\centerparametersmaybe = \relax
-\def\centerparameters{%
- \advance\rightskip by 3\rightskip
- \leftskip = \rightskip
- \parfillskip = 0pt
-}
-
-
-% I don't think this chapter style is supported any more, so I'm not
-% updating it with the new noderef stuff. We'll see. --karl, 11aug03.
-%
-\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
-%
-\def\unnchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\nobreak
-}
-\def\chfopen #1#2{\chapoddpage {\chapfonts
-\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
-\par\penalty 5000 %
-}
-\def\centerchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt
- \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
-}
-\def\CHAPFopen{%
- \global\let\chapmacro=\chfopen
- \global\let\centerchapmacro=\centerchfopen}
-
-
-% Section titles. These macros combine the section number parts and
-% call the generic \sectionheading to do the printing.
-%
-\newskip\secheadingskip
-\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
-
-% Subsection titles.
-\newskip\subsecheadingskip
-\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
-
-% Subsubsection titles.
-\def\subsubsecheadingskip{\subsecheadingskip}
-\def\subsubsecheadingbreak{\subsecheadingbreak}
-
-
-% Print any size, any type, section title.
-%
-% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
-% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
-% section number.
-%
-\def\sectionheading#1#2#3#4{%
- {%
- % Switch to the right set of fonts.
- \csname #2fonts\endcsname \rm
- %
- % Insert space above the heading.
- \csname #2headingbreak\endcsname
- %
- % Only insert the space after the number if we have a section number.
- \def\sectionlevel{#2}%
- \def\temptype{#3}%
- %
- \ifx\temptype\Ynothingkeyword
- \setbox0 = \hbox{}%
- \def\toctype{unn}%
- \gdef\thissection{#1}%
- \else\ifx\temptype\Yomitfromtockeyword
- % for @headings -- no section number, don't include in toc,
- % and don't redefine \thissection.
- \setbox0 = \hbox{}%
- \def\toctype{omit}%
- \let\sectionlevel=\empty
- \else\ifx\temptype\Yappendixkeyword
- \setbox0 = \hbox{#4\enspace}%
- \def\toctype{app}%
- \gdef\thissection{#1}%
- \else
- \setbox0 = \hbox{#4\enspace}%
- \def\toctype{num}%
- \gdef\thissection{#1}%
- \fi\fi\fi
- %
- % Write the toc entry (before \donoderef). See comments in \chfplain.
- \writetocentry{\toctype\sectionlevel}{#1}{#4}%
- %
- % Write the node reference (= pdf destination for pdftex).
- % Again, see comments in \chfplain.
- \donoderef{#3}%
- %
- % Output the actual section heading.
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
- \hangindent=\wd0 % zero if no section number
- \unhbox0 #1}%
- }%
- % Add extra space after the heading -- half of whatever came above it.
- % Don't allow stretch, though.
- \kern .5 \csname #2headingskip\endcsname
- %
- % Do not let the kern be a potential breakpoint, as it would be if it
- % was followed by glue.
- \nobreak
- %
- % We'll almost certainly start a paragraph next, so don't let that
- % glue accumulate. (Not a breakpoint because it's preceded by a
- % discardable item.)
- \vskip-\parskip
- %
- % This is purely so the last item on the list is a known \penalty >
- % 10000. This is so \startdefun can avoid allowing breakpoints after
- % section headings. Otherwise, it would insert a valid breakpoint between:
- %
- % @section sec-whatever
- % @deffn def-whatever
- \penalty 10001
-}
-
-
-\message{toc,}
-% Table of contents.
-\newwrite\tocfile
-
-% Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc.
-%
-% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
-% We append the current node name (if any) and page number as additional
-% arguments for the \{chap,sec,...}entry macros which will eventually
-% read this. The node name is used in the pdf outlines as the
-% destination to jump to.
-%
-% We open the .toc file for writing here instead of at @setfilename (or
-% any other fixed time) so that @contents can be anywhere in the document.
-% But if #1 is `omit', then we don't do anything. This is used for the
-% table of contents chapter openings themselves.
-%
-\newif\iftocfileopened
-\def\omitkeyword{omit}%
-%
-\def\writetocentry#1#2#3{%
- \edef\writetoctype{#1}%
- \ifx\writetoctype\omitkeyword \else
- \iftocfileopened\else
- \immediate\openout\tocfile = \jobname.toc
- \global\tocfileopenedtrue
- \fi
- %
- \iflinks
- {\atdummies \turnoffactive
- \edef\temp{%
- \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
- \temp
- }
- \fi
- \fi
- %
- % Tell \shipout to create a pdf destination on each page, if we're
- % writing pdf. These are used in the table of contents. We can't
- % just write one on every page because the title pages are numbered
- % 1 and 2 (the page numbers aren't printed), and so are the first
- % two pages of the document. Thus, we'd have two destinations named
- % `1', and two named `2'.
- \ifpdf \global\pdfmakepagedesttrue \fi
-}
-
-
-% These characters do not print properly in the Computer Modern roman
-% fonts, so we must take special care. This is more or less redundant
-% with the Texinfo input format setup at the end of this file.
-%
-\def\activecatcodes{%
- \catcode`\"=\active
- \catcode`\$=\active
- \catcode`\<=\active
- \catcode`\>=\active
- \catcode`\\=\active
- \catcode`\^=\active
- \catcode`\_=\active
- \catcode`\|=\active
- \catcode`\~=\active
-}
-
-
-% Read the toc file, which is essentially Texinfo input.
-\def\readtocfile{%
- \setupdatafile
- \activecatcodes
- \input \jobname.toc
-}
-
-\newskip\contentsrightmargin \contentsrightmargin=1in
-\newcount\savepageno
-\newcount\lastnegativepageno \lastnegativepageno = -1
-
-% Prepare to read what we've written to \tocfile.
-%
-\def\startcontents#1{%
- % If @setchapternewpage on, and @headings double, the contents should
- % start on an odd page, unlike chapters. Thus, we maintain
- % \contentsalignmacro in parallel with \pagealignmacro.
- % From: Torbjorn Granlund <tege@matematik.su.se>
- \contentsalignmacro
- \immediate\closeout\tocfile
- %
- % Don't need to put `Contents' or `Short Contents' in the headline.
- % It is abundantly clear what they are.
- \def\thischapter{}%
- \chapmacro{#1}{Yomitfromtoc}{}%
- %
- \savepageno = \pageno
- \begingroup % Set up to handle contents files properly.
- \raggedbottom % Worry more about breakpoints than the bottom.
- \advance\hsize by -\contentsrightmargin % Don't use the full line length.
- %
- % Roman numerals for page numbers.
- \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
-}
-
-
-% Normal (long) toc.
-\def\contents{%
- \startcontents{\putwordTOC}%
- \openin 1 \jobname.toc
- \ifeof 1 \else
- \readtocfile
- \fi
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \ifeof 1 \else
- \pdfmakeoutlines
- \fi
- \closein 1
- \endgroup
- \lastnegativepageno = \pageno
- \global\pageno = \savepageno
-}
-
-% And just the chapters.
-\def\summarycontents{%
- \startcontents{\putwordShortTOC}%
- %
- \let\numchapentry = \shortchapentry
- \let\appentry = \shortchapentry
- \let\unnchapentry = \shortunnchapentry
- % We want a true roman here for the page numbers.
- \secfonts
- \let\rm=\shortcontrm \let\bf=\shortcontbf
- \let\sl=\shortcontsl \let\tt=\shortconttt
- \rm
- \hyphenpenalty = 10000
- \advance\baselineskip by 1pt % Open it up a little.
- \def\numsecentry##1##2##3##4{}
- \let\appsecentry = \numsecentry
- \let\unnsecentry = \numsecentry
- \let\numsubsecentry = \numsecentry
- \let\appsubsecentry = \numsecentry
- \let\unnsubsecentry = \numsecentry
- \let\numsubsubsecentry = \numsecentry
- \let\appsubsubsecentry = \numsecentry
- \let\unnsubsubsecentry = \numsecentry
- \openin 1 \jobname.toc
- \ifeof 1 \else
- \readtocfile
- \fi
- \closein 1
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \endgroup
- \lastnegativepageno = \pageno
- \global\pageno = \savepageno
-}
-\let\shortcontents = \summarycontents
-
-% Typeset the label for a chapter or appendix for the short contents.
-% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
-%
-\def\shortchaplabel#1{%
- % This space should be enough, since a single number is .5em, and the
- % widest letter (M) is 1em, at least in the Computer Modern fonts.
- % But use \hss just in case.
- % (This space doesn't include the extra space that gets added after
- % the label; that gets put in by \shortchapentry above.)
- %
- % We'd like to right-justify chapter numbers, but that looks strange
- % with appendix letters. And right-justifying numbers and
- % left-justifying letters looks strange when there is less than 10
- % chapters. Have to read the whole toc once to know how many chapters
- % there are before deciding ...
- \hbox to 1em{#1\hss}%
-}
-
-% These macros generate individual entries in the table of contents.
-% The first argument is the chapter or section name.
-% The last argument is the page number.
-% The arguments in between are the chapter number, section number, ...
-
-% Chapters, in the main contents.
-\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
-%
-% Chapters, in the short toc.
-% See comments in \dochapentry re vbox and related settings.
-\def\shortchapentry#1#2#3#4{%
- \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
-}
-
-% Appendices, in the main contents.
-% Need the word Appendix, and a fixed-size box.
-%
-\def\appendixbox#1{%
- % We use M since it's probably the widest letter.
- \setbox0 = \hbox{\putwordAppendix{} M}%
- \hbox to \wd0{\putwordAppendix{} #1\hss}}
-%
-\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
-
-% Unnumbered chapters.
-\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
-\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
-
-% Sections.
-\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
-\let\appsecentry=\numsecentry
-\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
-
-% Subsections.
-\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsecentry=\numsubsecentry
-\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
-
-% And subsubsections.
-\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsubsecentry=\numsubsubsecentry
-\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
-
-% This parameter controls the indentation of the various levels.
-% Same as \defaultparindent.
-\newdimen\tocindent \tocindent = 15pt
-
-% Now for the actual typesetting. In all these, #1 is the text and #2 is the
-% page number.
-%
-% If the toc has to be broken over pages, we want it to be at chapters
-% if at all possible; hence the \penalty.
-\def\dochapentry#1#2{%
- \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
- \begingroup
- \chapentryfonts
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
- \endgroup
- \nobreak\vskip .25\baselineskip plus.1\baselineskip
-}
-
-\def\dosecentry#1#2{\begingroup
- \secentryfonts \leftskip=\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsecentry#1#2{\begingroup
- \subsecentryfonts \leftskip=2\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsubsecentry#1#2{\begingroup
- \subsubsecentryfonts \leftskip=3\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-% We use the same \entry macro as for the index entries.
-\let\tocentry = \entry
-
-% Space between chapter (or whatever) number and the title.
-\def\labelspace{\hskip1em \relax}
-
-\def\dopageno#1{{\rm #1}}
-\def\doshortpageno#1{{\rm #1}}
-
-\def\chapentryfonts{\secfonts \rm}
-\def\secentryfonts{\textfonts}
-\def\subsecentryfonts{\textfonts}
-\def\subsubsecentryfonts{\textfonts}
-
-
-\message{environments,}
-% @foo ... @end foo.
-
-% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
-%
-% Since these characters are used in examples, it should be an even number of
-% \tt widths. Each \tt character is 1en, so two makes it 1em.
-%
-\def\point{$\star$}
-\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
-\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
-\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
-
-% The @error{} command.
-% Adapted from the TeXbook's \boxit.
-%
-\newbox\errorbox
-%
-{\tentt \global\dimen0 = 3em}% Width of the box.
-\dimen2 = .55pt % Thickness of rules
-% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
-%
-\setbox\errorbox=\hbox to \dimen0{\hfil
- \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
- \advance\hsize by -2\dimen2 % Rules.
- \vbox{%
- \hrule height\dimen2
- \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
- \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
- \kern3pt\vrule width\dimen2}% Space to right.
- \hrule height\dimen2}
- \hfil}
-%
-\def\error{\leavevmode\lower.7ex\copy\errorbox}
-
-% @tex ... @end tex escapes into raw Tex temporarily.
-% One exception: @ is still an escape character, so that @end tex works.
-% But \@ or @@ will get a plain tex @ character.
-
-\envdef\tex{%
- \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
- \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
- \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
- \catcode `\%=14
- \catcode `\+=\other
- \catcode `\"=\other
- \catcode `\|=\other
- \catcode `\<=\other
- \catcode `\>=\other
- \escapechar=`\\
- %
- \let\b=\ptexb
- \let\bullet=\ptexbullet
- \let\c=\ptexc
- \let\,=\ptexcomma
- \let\.=\ptexdot
- \let\dots=\ptexdots
- \let\equiv=\ptexequiv
- \let\!=\ptexexclam
- \let\i=\ptexi
- \let\indent=\ptexindent
- \let\noindent=\ptexnoindent
- \let\{=\ptexlbrace
- \let\+=\tabalign
- \let\}=\ptexrbrace
- \let\/=\ptexslash
- \let\*=\ptexstar
- \let\t=\ptext
- \let\frenchspacing=\plainfrenchspacing
- %
- \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
- \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
- \def\@{@}%
-}
-% There is no need to define \Etex.
-
-% Define @lisp ... @end lisp.
-% @lisp environment forms a group so it can rebind things,
-% including the definition of @end lisp (which normally is erroneous).
-
-% Amount to narrow the margins by for @lisp.
-\newskip\lispnarrowing \lispnarrowing=0.4in
-
-% This is the definition that ^^M gets inside @lisp, @example, and other
-% such environments. \null is better than a space, since it doesn't
-% have any width.
-\def\lisppar{\null\endgraf}
-
-% This space is always present above and below environments.
-\newskip\envskipamount \envskipamount = 0pt
-
-% Make spacing and below environment symmetrical. We use \parskip here
-% to help in doing that, since in @example-like environments \parskip
-% is reset to zero; thus the \afterenvbreak inserts no space -- but the
-% start of the next paragraph will insert \parskip.
-%
-\def\aboveenvbreak{{%
- % =10000 instead of <10000 because of a special case in \itemzzz and
- % \sectionheading, q.v.
- \ifnum \lastpenalty=10000 \else
- \advance\envskipamount by \parskip
- \endgraf
- \ifdim\lastskip<\envskipamount
- \removelastskip
- % it's not a good place to break if the last penalty was \nobreak
- % or better ...
- \ifnum\lastpenalty<10000 \penalty-50 \fi
- \vskip\envskipamount
- \fi
- \fi
-}}
-
-\let\afterenvbreak = \aboveenvbreak
-
-% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
-\let\nonarrowing=\relax
-
-% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
-% environment contents.
-\font\circle=lcircle10
-\newdimen\circthick
-\newdimen\cartouter\newdimen\cartinner
-\newskip\normbskip\newskip\normpskip\newskip\normlskip
-\circthick=\fontdimen8\circle
-%
-\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
-\def\ctr{{\hskip 6pt\circle\char'010}}
-\def\cbl{{\circle\char'012\hskip -6pt}}
-\def\cbr{{\hskip 6pt\circle\char'011}}
-\def\carttop{\hbox to \cartouter{\hskip\lskip
- \ctl\leaders\hrule height\circthick\hfil\ctr
- \hskip\rskip}}
-\def\cartbot{\hbox to \cartouter{\hskip\lskip
- \cbl\leaders\hrule height\circthick\hfil\cbr
- \hskip\rskip}}
-%
-\newskip\lskip\newskip\rskip
-
-\envdef\cartouche{%
- \ifhmode\par\fi % can't be in the midst of a paragraph.
- \startsavinginserts
- \lskip=\leftskip \rskip=\rightskip
- \leftskip=0pt\rightskip=0pt % we want these *outside*.
- \cartinner=\hsize \advance\cartinner by-\lskip
- \advance\cartinner by-\rskip
- \cartouter=\hsize
- \advance\cartouter by 18.4pt % allow for 3pt kerns on either
- % side, and for 6pt waste from
- % each corner char, and rule thickness
- \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
- % Flag to tell @lisp, etc., not to narrow margin.
- \let\nonarrowing=\comment
- \vbox\bgroup
- \baselineskip=0pt\parskip=0pt\lineskip=0pt
- \carttop
- \hbox\bgroup
- \hskip\lskip
- \vrule\kern3pt
- \vbox\bgroup
- \kern3pt
- \hsize=\cartinner
- \baselineskip=\normbskip
- \lineskip=\normlskip
- \parskip=\normpskip
- \vskip -\parskip
- \comment % For explanation, see the end of \def\group.
-}
-\def\Ecartouche{%
- \ifhmode\par\fi
- \kern3pt
- \egroup
- \kern3pt\vrule
- \hskip\rskip
- \egroup
- \cartbot
- \egroup
- \checkinserts
-}
-
-
-% This macro is called at the beginning of all the @example variants,
-% inside a group.
-\def\nonfillstart{%
- \aboveenvbreak
- \hfuzz = 12pt % Don't be fussy
- \sepspaces % Make spaces be word-separators rather than space tokens.
- \let\par = \lisppar % don't ignore blank lines
- \obeylines % each line of input is a line of output
- \parskip = 0pt
- \parindent = 0pt
- \emergencystretch = 0pt % don't try to avoid overfull boxes
- % @cartouche defines \nonarrowing to inhibit narrowing
- % at next level down.
- \ifx\nonarrowing\relax
- \advance \leftskip by \lispnarrowing
- \exdentamount=\lispnarrowing
- \fi
- \let\exdent=\nofillexdent
-}
-
-% If you want all examples etc. small: @set dispenvsize small.
-% If you want even small examples the full size: @set dispenvsize nosmall.
-% This affects the following displayed environments:
-% @example, @display, @format, @lisp
-%
-\def\smallword{small}
-\def\nosmallword{nosmall}
-\let\SETdispenvsize\relax
-\def\setnormaldispenv{%
- \ifx\SETdispenvsize\smallword
- \smallexamplefonts \rm
- \fi
-}
-\def\setsmalldispenv{%
- \ifx\SETdispenvsize\nosmallword
- \else
- \smallexamplefonts \rm
- \fi
-}
-
-% We often define two environments, @foo and @smallfoo.
-% Let's do it by one command:
-\def\makedispenv #1#2{
- \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}
- \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}
- \expandafter\let\csname E#1\endcsname \afterenvbreak
- \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
-}
-
-% Define two synonyms:
-\def\maketwodispenvs #1#2#3{
- \makedispenv{#1}{#3}
- \makedispenv{#2}{#3}
-}
-
-% @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
-%
-% @smallexample and @smalllisp: use smaller fonts.
-% Originally contributed by Pavel@xerox.
-%
-\maketwodispenvs {lisp}{example}{%
- \nonfillstart
- \tt
- \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
- \gobble % eat return
-}
-
-% @display/@smalldisplay: same as @lisp except keep current font.
-%
-\makedispenv {display}{%
- \nonfillstart
- \gobble
-}
-
-% @format/@smallformat: same as @display except don't narrow margins.
-%
-\makedispenv{format}{%
- \let\nonarrowing = t%
- \nonfillstart
- \gobble
-}
-
-% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
-\envdef\flushleft{%
- \let\nonarrowing = t%
- \nonfillstart
- \gobble
-}
-\let\Eflushleft = \afterenvbreak
-
-% @flushright.
-%
-\envdef\flushright{%
- \let\nonarrowing = t%
- \nonfillstart
- \advance\leftskip by 0pt plus 1fill
- \gobble
-}
-\let\Eflushright = \afterenvbreak
-
-
-% @quotation does normal linebreaking (hence we can't use \nonfillstart)
-% and narrows the margins. We keep \parskip nonzero in general, since
-% we're doing normal filling. So, when using \aboveenvbreak and
-% \afterenvbreak, temporarily make \parskip 0.
-%
-\envdef\quotation{%
- {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
- \parindent=0pt
- %
- % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
- \ifx\nonarrowing\relax
- \advance\leftskip by \lispnarrowing
- \advance\rightskip by \lispnarrowing
- \exdentamount = \lispnarrowing
- \let\nonarrowing = \relax
- \fi
- \parsearg\quotationlabel
-}
-
-% We have retained a nonzero parskip for the environment, since we're
-% doing normal filling.
-%
-\def\Equotation{%
- \par
- \ifx\quotationauthor\undefined\else
- % indent a bit.
- \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
- \fi
- {\parskip=0pt \afterenvbreak}%
-}
-
-% If we're given an argument, typeset it in bold with a colon after.
-\def\quotationlabel#1{%
- \def\temp{#1}%
- \ifx\temp\empty \else
- {\bf #1: }%
- \fi
-}
-
-
-% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
-% If we want to allow any <char> as delimiter,
-% we need the curly braces so that makeinfo sees the @verb command, eg:
-% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
-%
-% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
-%
-% [Knuth] p.344; only we need to do the other characters Texinfo sets
-% active too. Otherwise, they get lost as the first character on a
-% verbatim line.
-\def\dospecials{%
- \do\ \do\\\do\{\do\}\do\$\do\&%
- \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
- \do\<\do\>\do\|\do\@\do+\do\"%
-}
-%
-% [Knuth] p. 380
-\def\uncatcodespecials{%
- \def\do##1{\catcode`##1=\other}\dospecials}
-%
-% [Knuth] pp. 380,381,391
-% Disable Spanish ligatures ?` and !` of \tt font
-\begingroup
- \catcode`\`=\active\gdef`{\relax\lq}
-\endgroup
-%
-% Setup for the @verb command.
-%
-% Eight spaces for a tab
-\begingroup
- \catcode`\^^I=\active
- \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
-\endgroup
-%
-\def\setupverb{%
- \tt % easiest (and conventionally used) font for verbatim
- \def\par{\leavevmode\endgraf}%
- \catcode`\`=\active
- \tabeightspaces
- % Respect line breaks,
- % print special symbols as themselves, and
- % make each space count
- % must do in this order:
- \obeylines \uncatcodespecials \sepspaces
-}
-
-% Setup for the @verbatim environment
-%
-% Real tab expansion
-\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
-%
-\def\starttabbox{\setbox0=\hbox\bgroup}
-\begingroup
- \catcode`\^^I=\active
- \gdef\tabexpand{%
- \catcode`\^^I=\active
- \def^^I{\leavevmode\egroup
- \dimen0=\wd0 % the width so far, or since the previous tab
- \divide\dimen0 by\tabw
- \multiply\dimen0 by\tabw % compute previous multiple of \tabw
- \advance\dimen0 by\tabw % advance to next multiple of \tabw
- \wd0=\dimen0 \box0 \starttabbox
- }%
- }
-\endgroup
-\def\setupverbatim{%
- \nonfillstart
- \advance\leftskip by -\defbodyindent
- % Easiest (and conventionally used) font for verbatim
- \tt
- \def\par{\leavevmode\egroup\box0\endgraf}%
- \catcode`\`=\active
- \tabexpand
- % Respect line breaks,
- % print special symbols as themselves, and
- % make each space count
- % must do in this order:
- \obeylines \uncatcodespecials \sepspaces
- \everypar{\starttabbox}%
-}
-
-% Do the @verb magic: verbatim text is quoted by unique
-% delimiter characters. Before first delimiter expect a
-% right brace, after last delimiter expect closing brace:
-%
-% \def\doverb'{'<char>#1<char>'}'{#1}
-%
-% [Knuth] p. 382; only eat outer {}
-\begingroup
- \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
- \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
-\endgroup
-%
-\def\verb{\begingroup\setupverb\doverb}
-%
-%
-% Do the @verbatim magic: define the macro \doverbatim so that
-% the (first) argument ends when '@end verbatim' is reached, ie:
-%
-% \def\doverbatim#1@end verbatim{#1}
-%
-% For Texinfo it's a lot easier than for LaTeX,
-% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
-% we need not redefine '\', '{' and '}'.
-%
-% Inspired by LaTeX's verbatim command set [latex.ltx]
-%
-\begingroup
- \catcode`\ =\active
- \obeylines %
- % ignore everything up to the first ^^M, that's the newline at the end
- % of the @verbatim input line itself. Otherwise we get an extra blank
- % line in the output.
- \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
- % We really want {...\end verbatim} in the body of the macro, but
- % without the active space; thus we have to use \xdef and \gobble.
-\endgroup
-%
-\envdef\verbatim{%
- \setupverbatim\doverbatim
-}
-\let\Everbatim = \afterenvbreak
-
-
-% @verbatiminclude FILE - insert text of file in verbatim environment.
-%
-\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
-%
-\def\doverbatiminclude#1{%
- {%
- \makevalueexpandable
- \setupverbatim
- \input #1
- \afterenvbreak
- }%
-}
-
-% @copying ... @end copying.
-% Save the text away for @insertcopying later.
-%
-% We save the uninterpreted tokens, rather than creating a box.
-% Saving the text in a box would be much easier, but then all the
-% typesetting commands (@smallbook, font changes, etc.) have to be done
-% beforehand -- and a) we want @copying to be done first in the source
-% file; b) letting users define the frontmatter in as flexible order as
-% possible is very desirable.
-%
-\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
-\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
-%
-\def\insertcopying{%
- \begingroup
- \parindent = 0pt % paragraph indentation looks wrong on title page
- \scanexp\copyingtext
- \endgroup
-}
-
-\message{defuns,}
-% @defun etc.
-
-\newskip\defbodyindent \defbodyindent=.4in
-\newskip\defargsindent \defargsindent=50pt
-\newskip\deflastargmargin \deflastargmargin=18pt
-
-% Start the processing of @deffn:
-\def\startdefun{%
- \ifnum\lastpenalty<10000
- \medbreak
- \else
- % If there are two @def commands in a row, we'll have a \nobreak,
- % which is there to keep the function description together with its
- % header. But if there's nothing but headers, we need to allow a
- % break somewhere. Check specifically for penalty 10002, inserted
- % by \defargscommonending, instead of 10000, since the sectioning
- % commands also insert a nobreak penalty, and we don't want to allow
- % a break between a section heading and a defun.
- %
- \ifnum\lastpenalty=10002 \penalty2000 \fi
- %
- % Similarly, after a section heading, do not allow a break.
- % But do insert the glue.
- \medskip % preceded by discardable penalty, so not a breakpoint
- \fi
- %
- \parindent=0in
- \advance\leftskip by \defbodyindent
- \exdentamount=\defbodyindent
-}
-
-\def\dodefunx#1{%
- % First, check whether we are in the right environment:
- \checkenv#1%
- %
- % As above, allow line break if we have multiple x headers in a row.
- % It's not a great place, though.
- \ifnum\lastpenalty=10002 \penalty3000 \fi
- %
- % And now, it's time to reuse the body of the original defun:
- \expandafter\gobbledefun#1%
-}
-\def\gobbledefun#1\startdefun{}
-
-% \printdefunline \deffnheader{text}
-%
-\def\printdefunline#1#2{%
- \begingroup
- % call \deffnheader:
- #1#2 \endheader
- % common ending:
- \interlinepenalty = 10000
- \advance\rightskip by 0pt plus 1fil
- \endgraf
- \nobreak\vskip -\parskip
- \penalty 10002 % signal to \startdefun and \dodefunx
- % Some of the @defun-type tags do not enable magic parentheses,
- % rendering the following check redundant. But we don't optimize.
- \checkparencounts
- \endgroup
-}
-
-\def\Edefun{\endgraf\medbreak}
-
-% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
-% the only thing remainnig is to define \deffnheader.
-%
-\def\makedefun#1{%
- \expandafter\let\csname E#1\endcsname = \Edefun
- \edef\temp{\noexpand\domakedefun
- \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
- \temp
-}
-
-% \domakedefun \deffn \deffnx \deffnheader
-%
-% Define \deffn and \deffnx, without parameters.
-% \deffnheader has to be defined explicitly.
-%
-\def\domakedefun#1#2#3{%
- \envdef#1{%
- \startdefun
- \parseargusing\activeparens{\printdefunline#3}%
- }%
- \def#2{\dodefunx#1}%
- \def#3%
-}
-
-%%% Untyped functions:
-
-% @deffn category name args
-\makedefun{deffn}{\deffngeneral{}}
-
-% @deffn category class name args
-\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
-
-% \defopon {category on}class name args
-\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
-
-% \deffngeneral {subind}category name args
-%
-\def\deffngeneral#1#2 #3 #4\endheader{%
- % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
- \dosubind{fn}{\code{#3}}{#1}%
- \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
-}
-
-%%% Typed functions:
-
-% @deftypefn category type name args
-\makedefun{deftypefn}{\deftypefngeneral{}}
-
-% @deftypeop category class type name args
-\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
-
-% \deftypeopon {category on}class type name args
-\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
-
-% \deftypefngeneral {subind}category type name args
-%
-\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
- \dosubind{fn}{\code{#4}}{#1}%
- \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
-}
-
-%%% Typed variables:
-
-% @deftypevr category type var args
-\makedefun{deftypevr}{\deftypecvgeneral{}}
-
-% @deftypecv category class type var args
-\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
-
-% \deftypecvof {category of}class type var args
-\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
-
-% \deftypecvgeneral {subind}category type var args
-%
-\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
- \dosubind{vr}{\code{#4}}{#1}%
- \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
-}
-
-%%% Untyped variables:
-
-% @defvr category var args
-\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
-
-% @defcv category class var args
-\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
-
-% \defcvof {category of}class var args
-\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
-
-%%% Type:
-% @deftp category name args
-\makedefun{deftp}#1 #2 #3\endheader{%
- \doind{tp}{\code{#2}}%
- \defname{#1}{}{#2}\defunargs{#3\unskip}%
-}
-
-% Remaining @defun-like shortcuts:
-\makedefun{defun}{\deffnheader{\putwordDeffunc} }
-\makedefun{defmac}{\deffnheader{\putwordDefmac} }
-\makedefun{defspec}{\deffnheader{\putwordDefspec} }
-\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
-\makedefun{defvar}{\defvrheader{\putwordDefvar} }
-\makedefun{defopt}{\defvrheader{\putwordDefopt} }
-\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
-\makedefun{defmethod}{\defopon\putwordMethodon}
-\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
-\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
-\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
-
-% \defname, which formats the name of the @def (not the args).
-% #1 is the category, such as "Function".
-% #2 is the return type, if any.
-% #3 is the function name.
-%
-% We are followed by (but not passed) the arguments, if any.
-%
-\def\defname#1#2#3{%
- % Get the values of \leftskip and \rightskip as they were outside the @def...
- \advance\leftskip by -\defbodyindent
- %
- % How we'll format the type name. Putting it in brackets helps
- % distinguish it from the body text that may end up on the next line
- % just below it.
- \def\temp{#1}%
- \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
- %
- % Figure out line sizes for the paragraph shape.
- % The first line needs space for \box0; but if \rightskip is nonzero,
- % we need only space for the part of \box0 which exceeds it:
- \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip
- % The continuations:
- \dimen2=\hsize \advance\dimen2 by -\defargsindent
- % (plain.tex says that \dimen1 should be used only as global.)
- \parshape 2 0in \dimen0 \defargsindent \dimen2
- %
- % Put the type name to the right margin.
- \noindent
- \hbox to 0pt{%
- \hfil\box0 \kern-\hsize
- % \hsize has to be shortened this way:
- \kern\leftskip
- % Intentionally do not respect \rightskip, since we need the space.
- }%
- %
- % Allow all lines to be underfull without complaint:
- \tolerance=10000 \hbadness=10000
- \exdentamount=\defbodyindent
- {%
- % defun fonts. We use typewriter by default (used to be bold) because:
- % . we're printing identifiers, they should be in tt in principle.
- % . in languages with many accents, such as Czech or French, it's
- % common to leave accents off identifiers. The result looks ok in
- % tt, but exceedingly strange in rm.
- % . we don't want -- and --- to be treated as ligatures.
- % . this still does not fix the ?` and !` ligatures, but so far no
- % one has made identifiers using them :).
- \df \tt
- \def\temp{#2}% return value type
- \ifx\temp\empty\else \tclose{\temp} \fi
- #3% output function name
- }%
- {\rm\enskip}% hskip 0.5 em of \tenrm
- %
- \boldbrax
- % arguments will be output next, if any.
-}
-
-% Print arguments in slanted roman (not ttsl), inconsistently with using
-% tt for the name. This is because literal text is sometimes needed in
-% the argument list (groff manual), and ttsl and tt are not very
-% distinguishable. Prevent hyphenation at `-' chars.
-%
-\def\defunargs#1{%
- % use sl by default (not ttsl),
- % tt for the names.
- \df \sl \hyphenchar\font=0
- %
- % On the other hand, if an argument has two dashes (for instance), we
- % want a way to get ttsl. Let's try @var for that.
- \let\var=\ttslanted
- #1%
- \sl\hyphenchar\font=45
-}
-
-% We want ()&[] to print specially on the defun line.
-%
-\def\activeparens{%
- \catcode`\(=\active \catcode`\)=\active
- \catcode`\[=\active \catcode`\]=\active
- \catcode`\&=\active
-}
-
-% Make control sequences which act like normal parenthesis chars.
-\let\lparen = ( \let\rparen = )
-
-% Be sure that we always have a definition for `(', etc. For example,
-% if the fn name has parens in it, \boldbrax will not be in effect yet,
-% so TeX would otherwise complain about undefined control sequence.
-{
- \activeparens
- \global\let(=\lparen \global\let)=\rparen
- \global\let[=\lbrack \global\let]=\rbrack
- \global\let& = \&
-
- \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
- \gdef\magicamp{\let&=\amprm}
-}
-
-\newcount\parencount
-
-% If we encounter &foo, then turn on ()-hacking afterwards
-\newif\ifampseen
-\def\amprm#1 {\ampseentrue{\bf\ }}
-
-\def\parenfont{%
- \ifampseen
- % At the first level, print parens in roman,
- % otherwise use the default font.
- \ifnum \parencount=1 \rm \fi
- \else
- % The \sf parens (in \boldbrax) actually are a little bolder than
- % the contained text. This is especially needed for [ and ] .
- \sf
- \fi
-}
-\def\infirstlevel#1{%
- \ifampseen
- \ifnum\parencount=1
- #1%
- \fi
- \fi
-}
-\def\bfafterword#1 {#1 \bf}
-
-\def\opnr{%
- \global\advance\parencount by 1
- {\parenfont(}%
- \infirstlevel \bfafterword
-}
-\def\clnr{%
- {\parenfont)}%
- \infirstlevel \sl
- \global\advance\parencount by -1
-}
-
-\newcount\brackcount
-\def\lbrb{%
- \global\advance\brackcount by 1
- {\bf[}%
-}
-\def\rbrb{%
- {\bf]}%
- \global\advance\brackcount by -1
-}
-
-\def\checkparencounts{%
- \ifnum\parencount=0 \else \badparencount \fi
- \ifnum\brackcount=0 \else \badbrackcount \fi
-}
-\def\badparencount{%
- \errmessage{Unbalanced parentheses in @def}%
- \global\parencount=0
-}
-\def\badbrackcount{%
- \errmessage{Unbalanced square braces in @def}%
- \global\brackcount=0
-}
-
-
-\message{macros,}
-% @macro.
-
-% To do this right we need a feature of e-TeX, \scantokens,
-% which we arrange to emulate with a temporary file in ordinary TeX.
-\ifx\eTeXversion\undefined
- \newwrite\macscribble
- \def\scantokens#1{%
- \toks0={#1}%
- \immediate\openout\macscribble=\jobname.tmp
- \immediate\write\macscribble{\the\toks0}%
- \immediate\closeout\macscribble
- \input \jobname.tmp
- }
-\fi
-
-\def\scanmacro#1{%
- \begingroup
- \newlinechar`\^^M
- \let\xeatspaces\eatspaces
- % Undo catcode changes of \startcontents and \doprintindex
- % When called from @insertcopying or (short)caption, we need active
- % backslash to get it printed correctly. Previously, we had
- % \catcode`\\=\other instead. We'll see whether a problem appears
- % with macro expansion. --kasal, 19aug04
- \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
- % ... and \example
- \spaceisspace
- %
- % Append \endinput to make sure that TeX does not see the ending newline.
- %
- % I've verified that it is necessary both for e-TeX and for ordinary TeX
- % --kasal, 29nov03
- \scantokens{#1\endinput}%
- \endgroup
-}
-
-\def\scanexp#1{%
- \edef\temp{\noexpand\scanmacro{#1}}%
- \temp
-}
-
-\newcount\paramno % Count of parameters
-\newtoks\macname % Macro name
-\newif\ifrecursive % Is it recursive?
-\def\macrolist{} % List of all defined macros in the form
- % \do\macro1\do\macro2...
-
-% Utility routines.
-% This does \let #1 = #2, with \csnames; that is,
-% \let \csname#1\endcsname = \csname#2\endcsname
-% (except of course we have to play expansion games).
-%
-\def\cslet#1#2{%
- \expandafter\let
- \csname#1\expandafter\endcsname
- \csname#2\endcsname
-}
-
-% Trim leading and trailing spaces off a string.
-% Concepts from aro-bend problem 15 (see CTAN).
-{\catcode`\@=11
-\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
-\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
-\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
-\def\unbrace#1{#1}
-\unbrace{\gdef\trim@@@ #1 } #2@{#1}
-}
-
-% Trim a single trailing ^^M off a string.
-{\catcode`\^^M=\other \catcode`\Q=3%
-\gdef\eatcr #1{\eatcra #1Q^^MQ}%
-\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
-\gdef\eatcrb#1Q#2Q{#1}%
-}
-
-% Macro bodies are absorbed as an argument in a context where
-% all characters are catcode 10, 11 or 12, except \ which is active
-% (as in normal texinfo). It is necessary to change the definition of \.
-
-% It's necessary to have hard CRs when the macro is executed. This is
-% done by making ^^M (\endlinechar) catcode 12 when reading the macro
-% body, and then making it the \newlinechar in \scanmacro.
-
-\def\scanctxt{%
- \catcode`\"=\other
- \catcode`\+=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\@=\other
- \catcode`\^=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\~=\other
-}
-
-\def\scanargctxt{%
- \scanctxt
- \catcode`\\=\other
- \catcode`\^^M=\other
-}
-
-\def\macrobodyctxt{%
- \scanctxt
- \catcode`\{=\other
- \catcode`\}=\other
- \catcode`\^^M=\other
- \usembodybackslash
-}
-
-\def\macroargctxt{%
- \scanctxt
- \catcode`\\=\other
-}
-
-% \mbodybackslash is the definition of \ in @macro bodies.
-% It maps \foo\ => \csname macarg.foo\endcsname => #N
-% where N is the macro parameter number.
-% We define \csname macarg.\endcsname to be \realbackslash, so
-% \\ in macro replacement text gets you a backslash.
-
-{\catcode`@=0 @catcode`@\=@active
- @gdef@usembodybackslash{@let\=@mbodybackslash}
- @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
-}
-\expandafter\def\csname macarg.\endcsname{\realbackslash}
-
-\def\macro{\recursivefalse\parsearg\macroxxx}
-\def\rmacro{\recursivetrue\parsearg\macroxxx}
-
-\def\macroxxx#1{%
- \getargs{#1}% now \macname is the macname and \argl the arglist
- \ifx\argl\empty % no arguments
- \paramno=0%
- \else
- \expandafter\parsemargdef \argl;%
- \fi
- \if1\csname ismacro.\the\macname\endcsname
- \message{Warning: redefining \the\macname}%
- \else
- \expandafter\ifx\csname \the\macname\endcsname \relax
- \else \errmessage{Macro name \the\macname\space already defined}\fi
- \global\cslet{macsave.\the\macname}{\the\macname}%
- \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
- % Add the macroname to \macrolist
- \toks0 = \expandafter{\macrolist\do}%
- \xdef\macrolist{\the\toks0
- \expandafter\noexpand\csname\the\macname\endcsname}%
- \fi
- \begingroup \macrobodyctxt
- \ifrecursive \expandafter\parsermacbody
- \else \expandafter\parsemacbody
- \fi}
-
-\parseargdef\unmacro{%
- \if1\csname ismacro.#1\endcsname
- \global\cslet{#1}{macsave.#1}%
- \global\expandafter\let \csname ismacro.#1\endcsname=0%
- % Remove the macro name from \macrolist:
- \begingroup
- \expandafter\let\csname#1\endcsname \relax
- \let\do\unmacrodo
- \xdef\macrolist{\macrolist}%
- \endgroup
- \else
- \errmessage{Macro #1 not defined}%
- \fi
-}
-
-% Called by \do from \dounmacro on each macro. The idea is to omit any
-% macro definitions that have been changed to \relax.
-%
-\def\unmacrodo#1{%
- \ifx#1\relax
- % remove this
- \else
- \noexpand\do \noexpand #1%
- \fi
-}
-
-% This makes use of the obscure feature that if the last token of a
-% <parameter list> is #, then the preceding argument is delimited by
-% an opening brace, and that opening brace is not consumed.
-\def\getargs#1{\getargsxxx#1{}}
-\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
-\def\getmacname #1 #2\relax{\macname={#1}}
-\def\getmacargs#1{\def\argl{#1}}
-
-% Parse the optional {params} list. Set up \paramno and \paramlist
-% so \defmacro knows what to do. Define \macarg.blah for each blah
-% in the params list, to be ##N where N is the position in that list.
-% That gets used by \mbodybackslash (above).
-
-% We need to get `macro parameter char #' into several definitions.
-% The technique used is stolen from LaTeX: let \hash be something
-% unexpandable, insert that wherever you need a #, and then redefine
-% it to # just before using the token list produced.
-%
-% The same technique is used to protect \eatspaces till just before
-% the macro is used.
-
-\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
- \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
-\def\parsemargdefxxx#1,{%
- \if#1;\let\next=\relax
- \else \let\next=\parsemargdefxxx
- \advance\paramno by 1%
- \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
- {\xeatspaces{\hash\the\paramno}}%
- \edef\paramlist{\paramlist\hash\the\paramno,}%
- \fi\next}
-
-% These two commands read recursive and nonrecursive macro bodies.
-% (They're different since rec and nonrec macros end differently.)
-
-\long\def\parsemacbody#1@end macro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-\long\def\parsermacbody#1@end rmacro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-
-% This defines the macro itself. There are six cases: recursive and
-% nonrecursive macros of zero, one, and many arguments.
-% Much magic with \expandafter here.
-% \xdef is used so that macro definitions will survive the file
-% they're defined in; @include reads the file inside a group.
-\def\defmacro{%
- \let\hash=##% convert placeholders to macro parameter chars
- \ifrecursive
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\scanmacro{\temp}}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup\noexpand\scanmacro{\temp}}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{\egroup\noexpand\scanmacro{\temp}}%
- \fi
- \else
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \expandafter\noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \fi
- \fi}
-
-\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
-
-% \braceorline decides whether the next nonwhitespace character is a
-% {. If so it reads up to the closing }, if not, it reads the whole
-% line. Whatever was read is then fed to the next control sequence
-% as an argument (by \parsebrace or \parsearg)
-\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
-\def\braceorlinexxx{%
- \ifx\nchar\bgroup\else
- \expandafter\parsearg
- \fi \next}
-
-% We want to disable all macros during \shipout so that they are not
-% expanded by \write.
-\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
- \edef\next{\macrolist}\expandafter\endgroup\next}
-
-% For \indexnofonts, we need to get rid of all macros, leaving only the
-% arguments (if present). Of course this is not nearly correct, but it
-% is the best we can do for now. makeinfo does not expand macros in the
-% argument to @deffn, which ends up writing an index entry, and texindex
-% isn't prepared for an index sort entry that starts with \.
-%
-% Since macro invocations are followed by braces, we can just redefine them
-% to take a single TeX argument. The case of a macro invocation that
-% goes to end-of-line is not handled.
-%
-\def\emptyusermacros{\begingroup
- \def\do##1{\let\noexpand##1=\noexpand\asis}%
- \edef\next{\macrolist}\expandafter\endgroup\next}
-
-
-% @alias.
-% We need some trickery to remove the optional spaces around the equal
-% sign. Just make them active and then expand them all to nothing.
-\def\alias{\parseargusing\obeyspaces\aliasxxx}
-\def\aliasxxx #1{\aliasyyy#1\relax}
-\def\aliasyyy #1=#2\relax{%
- {%
- \expandafter\let\obeyedspace=\empty
- \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
- }%
- \next
-}
-
-
-\message{cross references,}
-
-\newwrite\auxfile
-
-\newif\ifhavexrefs % True if xref values are known.
-\newif\ifwarnedxrefs % True if we warned once that they aren't known.
-
-% @inforef is relatively simple.
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
- node \samp{\ignorespaces#1{}}}
-
-% @node's only job in TeX is to define \lastnode, which is used in
-% cross-references. The @node line might or might not have commas, and
-% might or might not have spaces before the first comma, like:
-% @node foo , bar , ...
-% We don't want such trailing spaces in the node name.
-%
-\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
-%
-% also remove a trailing comma, in case of something like this:
-% @node Help-Cross, , , Cross-refs
-\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
-\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
-
-\let\nwnode=\node
-\let\lastnode=\empty
-
-% Write a cross-reference definition for the current node. #1 is the
-% type (Ynumbered, Yappendix, Ynothing).
-%
-\def\donoderef#1{%
- \ifx\lastnode\empty\else
- \setref{\lastnode}{#1}%
- \global\let\lastnode=\empty
- \fi
-}
-
-% @anchor{NAME} -- define xref target at arbitrary point.
-%
-\newcount\savesfregister
-%
-\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
-\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
-\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
-
-% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
-% anchor), which consists of three parts:
-% 1) NAME-title - the current sectioning name taken from \thissection,
-% or the anchor name.
-% 2) NAME-snt - section number and type, passed as the SNT arg, or
-% empty for anchors.
-% 3) NAME-pg - the page number.
-%
-% This is called from \donoderef, \anchor, and \dofloat. In the case of
-% floats, there is an additional part, which is not written here:
-% 4) NAME-lof - the text as it should appear in a @listoffloats.
-%
-\def\setref#1#2{%
- \pdfmkdest{#1}%
- \iflinks
- {%
- \atdummies % preserve commands, but don't expand them
- \turnoffactive
- \edef\writexrdef##1##2{%
- \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
- ##1}{##2}}% these are parameters of \writexrdef
- }%
- \toks0 = \expandafter{\thissection}%
- \immediate \writexrdef{title}{\the\toks0 }%
- \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
- \writexrdef{pg}{\folio}% will be written later, during \shipout
- }%
- \fi
-}
-
-% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
-% the node name, #2 the name of the Info cross-reference, #3 the printed
-% node name, #4 the name of the Info file, #5 the name of the printed
-% manual. All but the node name can be omitted.
-%
-\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
-\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
-\def\ref#1{\xrefX[#1,,,,,,,]}
-\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
- \unsepspaces
- \def\printedmanual{\ignorespaces #5}%
- \def\printedrefname{\ignorespaces #3}%
- \setbox1=\hbox{\printedmanual\unskip}%
- \setbox0=\hbox{\printedrefname\unskip}%
- \ifdim \wd0 = 0pt
- % No printed node name was explicitly given.
- \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
- % Use the node name inside the square brackets.
- \def\printedrefname{\ignorespaces #1}%
- \else
- % Use the actual chapter/section title appear inside
- % the square brackets. Use the real section title if we have it.
- \ifdim \wd1 > 0pt
- % It is in another manual, so we don't have it.
- \def\printedrefname{\ignorespaces #1}%
- \else
- \ifhavexrefs
- % We know the real title if we have the xref values.
- \def\printedrefname{\refx{#1-title}{}}%
- \else
- % Otherwise just copy the Info node name.
- \def\printedrefname{\ignorespaces #1}%
- \fi%
- \fi
- \fi
- \fi
- %
- % Make link in pdf output.
- \ifpdf
- \leavevmode
- \getfilename{#4}%
- {\turnoffactive
- % See comments at \activebackslashdouble.
- {\activebackslashdouble \xdef\pdfxrefdest{#1}%
- \backslashparens\pdfxrefdest}%
- %
- \ifnum\filenamelength>0
- \startlink attr{/Border [0 0 0]}%
- goto file{\the\filename.pdf} name{\pdfxrefdest}%
- \else
- \startlink attr{/Border [0 0 0]}%
- goto name{\pdfmkpgn{\pdfxrefdest}}%
- \fi
- }%
- \linkcolor
- \fi
- %
- % Float references are printed completely differently: "Figure 1.2"
- % instead of "[somenode], p.3". We distinguish them by the
- % LABEL-title being set to a magic string.
- {%
- % Have to otherify everything special to allow the \csname to
- % include an _ in the xref name, etc.
- \indexnofonts
- \turnoffactive
- \expandafter\global\expandafter\let\expandafter\Xthisreftitle
- \csname XR#1-title\endcsname
- }%
- \iffloat\Xthisreftitle
- % If the user specified the print name (third arg) to the ref,
- % print it instead of our usual "Figure 1.2".
- \ifdim\wd0 = 0pt
- \refx{#1-snt}%
- \else
- \printedrefname
- \fi
- %
- % if the user also gave the printed manual name (fifth arg), append
- % "in MANUALNAME".
- \ifdim \wd1 > 0pt
- \space \putwordin{} \cite{\printedmanual}%
- \fi
- \else
- % node/anchor (non-float) references.
- %
- % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
- % insert empty discretionaries after hyphens, which means that it will
- % not find a line break at a hyphen in a node names. Since some manuals
- % are best written with fairly long node names, containing hyphens, this
- % is a loss. Therefore, we give the text of the node name again, so it
- % is as if TeX is seeing it for the first time.
- \ifdim \wd1 > 0pt
- \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
- \else
- % _ (for example) has to be the character _ for the purposes of the
- % control sequence corresponding to the node, but it has to expand
- % into the usual \leavevmode...\vrule stuff for purposes of
- % printing. So we \turnoffactive for the \refx-snt, back on for the
- % printing, back off for the \refx-pg.
- {\turnoffactive
- % Only output a following space if the -snt ref is nonempty; for
- % @unnumbered and @anchor, it won't be.
- \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
- \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
- }%
- % output the `[mynode]' via a macro so it can be overridden.
- \xrefprintnodename\printedrefname
- %
- % But we always want a comma and a space:
- ,\space
- %
- % output the `page 3'.
- \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
- \fi
- \fi
- \endlink
-\endgroup}
-
-% This macro is called from \xrefX for the `[nodename]' part of xref
-% output. It's a separate macro only so it can be changed more easily,
-% since square brackets don't work well in some documents. Particularly
-% one that Bob is working on :).
-%
-\def\xrefprintnodename#1{[#1]}
-
-% Things referred to by \setref.
-%
-\def\Ynothing{}
-\def\Yomitfromtoc{}
-\def\Ynumbered{%
- \ifnum\secno=0
- \putwordChapter@tie \the\chapno
- \else \ifnum\subsecno=0
- \putwordSection@tie \the\chapno.\the\secno
- \else \ifnum\subsubsecno=0
- \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
- \else
- \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
- \fi\fi\fi
-}
-\def\Yappendix{%
- \ifnum\secno=0
- \putwordAppendix@tie @char\the\appendixno{}%
- \else \ifnum\subsecno=0
- \putwordSection@tie @char\the\appendixno.\the\secno
- \else \ifnum\subsubsecno=0
- \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
- \else
- \putwordSection@tie
- @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
- \fi\fi\fi
-}
-
-% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
-% If its value is nonempty, SUFFIX is output afterward.
-%
-\def\refx#1#2{%
- {%
- \indexnofonts
- \otherbackslash
- \expandafter\global\expandafter\let\expandafter\thisrefX
- \csname XR#1\endcsname
- }%
- \ifx\thisrefX\relax
- % If not defined, say something at least.
- \angleleft un\-de\-fined\angleright
- \iflinks
- \ifhavexrefs
- \message{\linenumber Undefined cross reference `#1'.}%
- \else
- \ifwarnedxrefs\else
- \global\warnedxrefstrue
- \message{Cross reference values unknown; you must run TeX again.}%
- \fi
- \fi
- \fi
- \else
- % It's defined, so just use it.
- \thisrefX
- \fi
- #2% Output the suffix in any case.
-}
-
-% This is the macro invoked by entries in the aux file. Usually it's
-% just a \def (we prepend XR to the control sequence name to avoid
-% collisions). But if this is a float type, we have more work to do.
-%
-\def\xrdef#1#2{%
- \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value.
- %
- % Was that xref control sequence that we just defined for a float?
- \expandafter\iffloat\csname XR#1\endcsname
- % it was a float, and we have the (safe) float type in \iffloattype.
- \expandafter\let\expandafter\floatlist
- \csname floatlist\iffloattype\endcsname
- %
- % Is this the first time we've seen this float type?
- \expandafter\ifx\floatlist\relax
- \toks0 = {\do}% yes, so just \do
- \else
- % had it before, so preserve previous elements in list.
- \toks0 = \expandafter{\floatlist\do}%
- \fi
- %
- % Remember this xref in the control sequence \floatlistFLOATTYPE,
- % for later use in \listoffloats.
- \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}%
- \fi
-}
-
-% Read the last existing aux file, if any. No error if none exists.
-%
-\def\tryauxfile{%
- \openin 1 \jobname.aux
- \ifeof 1 \else
- \readdatafile{aux}%
- \global\havexrefstrue
- \fi
- \closein 1
-}
-
-\def\setupdatafile{%
- \catcode`\^^@=\other
- \catcode`\^^A=\other
- \catcode`\^^B=\other
- \catcode`\^^C=\other
- \catcode`\^^D=\other
- \catcode`\^^E=\other
- \catcode`\^^F=\other
- \catcode`\^^G=\other
- \catcode`\^^H=\other
- \catcode`\^^K=\other
- \catcode`\^^L=\other
- \catcode`\^^N=\other
- \catcode`\^^P=\other
- \catcode`\^^Q=\other
- \catcode`\^^R=\other
- \catcode`\^^S=\other
- \catcode`\^^T=\other
- \catcode`\^^U=\other
- \catcode`\^^V=\other
- \catcode`\^^W=\other
- \catcode`\^^X=\other
- \catcode`\^^Z=\other
- \catcode`\^^[=\other
- \catcode`\^^\=\other
- \catcode`\^^]=\other
- \catcode`\^^^=\other
- \catcode`\^^_=\other
- % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
- % in xref tags, i.e., node names. But since ^^e4 notation isn't
- % supported in the main text, it doesn't seem desirable. Furthermore,
- % that is not enough: for node names that actually contain a ^
- % character, we would end up writing a line like this: 'xrdef {'hat
- % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
- % argument, and \hat is not an expandable control sequence. It could
- % all be worked out, but why? Either we support ^^ or we don't.
- %
- % The other change necessary for this was to define \auxhat:
- % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
- % and then to call \auxhat in \setq.
- %
- \catcode`\^=\other
- %
- % Special characters. Should be turned off anyway, but...
- \catcode`\~=\other
- \catcode`\[=\other
- \catcode`\]=\other
- \catcode`\"=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\$=\other
- \catcode`\#=\other
- \catcode`\&=\other
- \catcode`\%=\other
- \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
- %
- % This is to support \ in node names and titles, since the \
- % characters end up in a \csname. It's easier than
- % leaving it active and making its active definition an actual \
- % character. What I don't understand is why it works in the *value*
- % of the xrdef. Seems like it should be a catcode12 \, and that
- % should not typeset properly. But it works, so I'm moving on for
- % now. --karl, 15jan04.
- \catcode`\\=\other
- %
- % Make the characters 128-255 be printing characters.
- {%
- \count1=128
- \def\loop{%
- \catcode\count1=\other
- \advance\count1 by 1
- \ifnum \count1<256 \loop \fi
- }%
- }%
- %
- % @ is our escape character in .aux files, and we need braces.
- \catcode`\{=1
- \catcode`\}=2
- \catcode`\@=0
-}
-
-\def\readdatafile#1{%
-\begingroup
- \setupdatafile
- \input\jobname.#1
-\endgroup}
-
-\message{insertions,}
-% including footnotes.
-
-\newcount \footnoteno
-
-% The trailing space in the following definition for supereject is
-% vital for proper filling; pages come out unaligned when you do a
-% pagealignmacro call if that space before the closing brace is
-% removed. (Generally, numeric constants should always be followed by a
-% space to prevent strange expansion errors.)
-\def\supereject{\par\penalty -20000\footnoteno =0 }
-
-% @footnotestyle is meaningful for info output only.
-\let\footnotestyle=\comment
-
-{\catcode `\@=11
-%
-% Auto-number footnotes. Otherwise like plain.
-\gdef\footnote{%
- \let\indent=\ptexindent
- \let\noindent=\ptexnoindent
- \global\advance\footnoteno by \@ne
- \edef\thisfootno{$^{\the\footnoteno}$}%
- %
- % In case the footnote comes at the end of a sentence, preserve the
- % extra spacing after we do the footnote number.
- \let\@sf\empty
- \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
- %
- % Remove inadvertent blank space before typesetting the footnote number.
- \unskip
- \thisfootno\@sf
- \dofootnote
-}%
-
-% Don't bother with the trickery in plain.tex to not require the
-% footnote text as a parameter. Our footnotes don't need to be so general.
-%
-% Oh yes, they do; otherwise, @ifset (and anything else that uses
-% \parseargline) fails inside footnotes because the tokens are fixed when
-% the footnote is read. --karl, 16nov96.
-%
-\gdef\dofootnote{%
- \insert\footins\bgroup
- % We want to typeset this text as a normal paragraph, even if the
- % footnote reference occurs in (for example) a display environment.
- % So reset some parameters.
- \hsize=\pagewidth
- \interlinepenalty\interfootnotelinepenalty
- \splittopskip\ht\strutbox % top baseline for broken footnotes
- \splitmaxdepth\dp\strutbox
- \floatingpenalty\@MM
- \leftskip\z@skip
- \rightskip\z@skip
- \spaceskip\z@skip
- \xspaceskip\z@skip
- \parindent\defaultparindent
- %
- \smallfonts \rm
- %
- % Because we use hanging indentation in footnotes, a @noindent appears
- % to exdent this text, so make it be a no-op. makeinfo does not use
- % hanging indentation so @noindent can still be needed within footnote
- % text after an @example or the like (not that this is good style).
- \let\noindent = \relax
- %
- % Hang the footnote text off the number. Use \everypar in case the
- % footnote extends for more than one paragraph.
- \everypar = {\hang}%
- \textindent{\thisfootno}%
- %
- % Don't crash into the line above the footnote text. Since this
- % expands into a box, it must come within the paragraph, lest it
- % provide a place where TeX can split the footnote.
- \footstrut
- \futurelet\next\fo@t
-}
-}%end \catcode `\@=11
-
-% In case a @footnote appears in a vbox, save the footnote text and create
-% the real \insert just after the vbox finished. Otherwise, the insertion
-% would be lost.
-% Similarily, if a @footnote appears inside an alignment, save the footnote
-% text to a box and make the \insert when a row of the table is finished.
-% And the same can be done for other insert classes. --kasal, 16nov03.
-
-% Replace the \insert primitive by a cheating macro.
-% Deeper inside, just make sure that the saved insertions are not spilled
-% out prematurely.
-%
-\def\startsavinginserts{%
- \ifx \insert\ptexinsert
- \let\insert\saveinsert
- \else
- \let\checkinserts\relax
- \fi
-}
-
-% This \insert replacement works for both \insert\footins{foo} and
-% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
-%
-\def\saveinsert#1{%
- \edef\next{\noexpand\savetobox \makeSAVEname#1}%
- \afterassignment\next
- % swallow the left brace
- \let\temp =
-}
-\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
-\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
-
-\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
-
-\def\placesaveins#1{%
- \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
- {\box#1}%
-}
-
-% eat @SAVE -- beware, all of them have catcode \other:
-{
- \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-)
- \gdef\gobblesave @SAVE{}
-}
-
-% initialization:
-\def\newsaveins #1{%
- \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
- \next
-}
-\def\newsaveinsX #1{%
- \csname newbox\endcsname #1%
- \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
- \checksaveins #1}%
-}
-
-% initialize:
-\let\checkinserts\empty
-\newsaveins\footins
-\newsaveins\margin
-
-
-% @image. We use the macros from epsf.tex to support this.
-% If epsf.tex is not installed and @image is used, we complain.
-%
-% Check for and read epsf.tex up front. If we read it only at @image
-% time, we might be inside a group, and then its definitions would get
-% undone and the next image would fail.
-\openin 1 = epsf.tex
-\ifeof 1 \else
- % Do not bother showing banner with epsf.tex v2.7k (available in
- % doc/epsf.tex and on ctan).
- \def\epsfannounce{\toks0 = }%
- \input epsf.tex
-\fi
-\closein 1
-%
-% We will only complain once about lack of epsf.tex.
-\newif\ifwarnednoepsf
-\newhelp\noepsfhelp{epsf.tex must be installed for images to
- work. It is also included in the Texinfo distribution, or you can get
- it from ftp://tug.org/tex/epsf.tex.}
-%
-\def\image#1{%
- \ifx\epsfbox\undefined
- \ifwarnednoepsf \else
- \errhelp = \noepsfhelp
- \errmessage{epsf.tex not found, images will be ignored}%
- \global\warnednoepsftrue
- \fi
- \else
- \imagexxx #1,,,,,\finish
- \fi
-}
-%
-% Arguments to @image:
-% #1 is (mandatory) image filename; we tack on .eps extension.
-% #2 is (optional) width, #3 is (optional) height.
-% #4 is (ignored optional) html alt text.
-% #5 is (ignored optional) extension.
-% #6 is just the usual extra ignored arg for parsing this stuff.
-\newif\ifimagevmode
-\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
- \catcode`\^^M = 5 % in case we're inside an example
- \normalturnoffactive % allow _ et al. in names
- % If the image is by itself, center it.
- \ifvmode
- \imagevmodetrue
- \nobreak\bigskip
- % Usually we'll have text after the image which will insert
- % \parskip glue, so insert it here too to equalize the space
- % above and below.
- \nobreak\vskip\parskip
- \nobreak
- \line\bgroup\hss
- \fi
- %
- % Output the image.
- \ifpdf
- \dopdfimage{#1}{#2}{#3}%
- \else
- % \epsfbox itself resets \epsf?size at each figure.
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
- \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
- \epsfbox{#1.eps}%
- \fi
- %
- \ifimagevmode \hss \egroup \bigbreak \fi % space after the image
-\endgroup}
-
-
-% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
-% etc. We don't actually implement floating yet, we always include the
-% float "here". But it seemed the best name for the future.
-%
-\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
-
-% There may be a space before second and/or third parameter; delete it.
-\def\eatcommaspace#1, {#1,}
-
-% #1 is the optional FLOATTYPE, the text label for this float, typically
-% "Figure", "Table", "Example", etc. Can't contain commas. If omitted,
-% this float will not be numbered and cannot be referred to.
-%
-% #2 is the optional xref label. Also must be present for the float to
-% be referable.
-%
-% #3 is the optional positioning argument; for now, it is ignored. It
-% will somehow specify the positions allowed to float to (here, top, bottom).
-%
-% We keep a separate counter for each FLOATTYPE, which we reset at each
-% chapter-level command.
-\let\resetallfloatnos=\empty
-%
-\def\dofloat#1,#2,#3,#4\finish{%
- \let\thiscaption=\empty
- \let\thisshortcaption=\empty
- %
- % don't lose footnotes inside @float.
- %
- % BEWARE: when the floats start float, we have to issue warning whenever an
- % insert appears inside a float which could possibly float. --kasal, 26may04
- %
- \startsavinginserts
- %
- % We can't be used inside a paragraph.
- \par
- %
- \vtop\bgroup
- \def\floattype{#1}%
- \def\floatlabel{#2}%
- \def\floatloc{#3}% we do nothing with this yet.
- %
- \ifx\floattype\empty
- \let\safefloattype=\empty
- \else
- {%
- % the floattype might have accents or other special characters,
- % but we need to use it in a control sequence name.
- \indexnofonts
- \turnoffactive
- \xdef\safefloattype{\floattype}%
- }%
- \fi
- %
- % If label is given but no type, we handle that as the empty type.
- \ifx\floatlabel\empty \else
- % We want each FLOATTYPE to be numbered separately (Figure 1,
- % Table 1, Figure 2, ...). (And if no label, no number.)
- %
- \expandafter\getfloatno\csname\safefloattype floatno\endcsname
- \global\advance\floatno by 1
- %
- {%
- % This magic value for \thissection is output by \setref as the
- % XREFLABEL-title value. \xrefX uses it to distinguish float
- % labels (which have a completely different output format) from
- % node and anchor labels. And \xrdef uses it to construct the
- % lists of floats.
- %
- \edef\thissection{\floatmagic=\safefloattype}%
- \setref{\floatlabel}{Yfloat}%
- }%
- \fi
- %
- % start with \parskip glue, I guess.
- \vskip\parskip
- %
- % Don't suppress indentation if a float happens to start a section.
- \restorefirstparagraphindent
-}
-
-% we have these possibilities:
-% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
-% @float Foo,lbl & no caption: Foo 1.1
-% @float Foo & @caption{Cap}: Foo: Cap
-% @float Foo & no caption: Foo
-% @float ,lbl & Caption{Cap}: 1.1: Cap
-% @float ,lbl & no caption: 1.1
-% @float & @caption{Cap}: Cap
-% @float & no caption:
-%
-\def\Efloat{%
- \let\floatident = \empty
- %
- % In all cases, if we have a float type, it comes first.
- \ifx\floattype\empty \else \def\floatident{\floattype}\fi
- %
- % If we have an xref label, the number comes next.
- \ifx\floatlabel\empty \else
- \ifx\floattype\empty \else % if also had float type, need tie first.
- \appendtomacro\floatident{\tie}%
- \fi
- % the number.
- \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
- \fi
- %
- % Start the printed caption with what we've constructed in
- % \floatident, but keep it separate; we need \floatident again.
- \let\captionline = \floatident
- %
- \ifx\thiscaption\empty \else
- \ifx\floatident\empty \else
- \appendtomacro\captionline{: }% had ident, so need a colon between
- \fi
- %
- % caption text.
- \appendtomacro\captionline{\scanexp\thiscaption}%
- \fi
- %
- % If we have anything to print, print it, with space before.
- % Eventually this needs to become an \insert.
- \ifx\captionline\empty \else
- \vskip.5\parskip
- \captionline
- %
- % Space below caption.
- \vskip\parskip
- \fi
- %
- % If have an xref label, write the list of floats info. Do this
- % after the caption, to avoid chance of it being a breakpoint.
- \ifx\floatlabel\empty \else
- % Write the text that goes in the lof to the aux file as
- % \floatlabel-lof. Besides \floatident, we include the short
- % caption if specified, else the full caption if specified, else nothing.
- {%
- \atdummies \turnoffactive
- % since we read the caption text in the macro world, where ^^M
- % is turned into a normal character, we have to scan it back, so
- % we don't write the literal three characters "^^M" into the aux file.
- \scanexp{%
- \xdef\noexpand\gtemp{%
- \ifx\thisshortcaption\empty
- \thiscaption
- \else
- \thisshortcaption
- \fi
- }%
- }%
- \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
- \ifx\gtemp\empty \else : \gtemp \fi}}%
- }%
- \fi
- \egroup % end of \vtop
- %
- % place the captured inserts
- %
- % BEWARE: when the floats start float, we have to issue warning whenever an
- % insert appears inside a float which could possibly float. --kasal, 26may04
- %
- \checkinserts
-}
-
-% Append the tokens #2 to the definition of macro #1, not expanding either.
-%
-\def\appendtomacro#1#2{%
- \expandafter\def\expandafter#1\expandafter{#1#2}%
-}
-
-% @caption, @shortcaption
-%
-\def\caption{\docaption\thiscaption}
-\def\shortcaption{\docaption\thisshortcaption}
-\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
-\def\defcaption#1#2{\egroup \def#1{#2}}
-
-% The parameter is the control sequence identifying the counter we are
-% going to use. Create it if it doesn't exist and assign it to \floatno.
-\def\getfloatno#1{%
- \ifx#1\relax
- % Haven't seen this figure type before.
- \csname newcount\endcsname #1%
- %
- % Remember to reset this floatno at the next chap.
- \expandafter\gdef\expandafter\resetallfloatnos
- \expandafter{\resetallfloatnos #1=0 }%
- \fi
- \let\floatno#1%
-}
-
-% \setref calls this to get the XREFLABEL-snt value. We want an @xref
-% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we
-% first read the @float command.
-%
-\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
-
-% Magic string used for the XREFLABEL-title value, so \xrefX can
-% distinguish floats from other xref types.
-\def\floatmagic{!!float!!}
-
-% #1 is the control sequence we are passed; we expand into a conditional
-% which is true if #1 represents a float ref. That is, the magic
-% \thissection value which we \setref above.
-%
-\def\iffloat#1{\expandafter\doiffloat#1==\finish}
-%
-% #1 is (maybe) the \floatmagic string. If so, #2 will be the
-% (safe) float type for this float. We set \iffloattype to #2.
-%
-\def\doiffloat#1=#2=#3\finish{%
- \def\temp{#1}%
- \def\iffloattype{#2}%
- \ifx\temp\floatmagic
-}
-
-% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
-%
-\parseargdef\listoffloats{%
- \def\floattype{#1}% floattype
- {%
- % the floattype might have accents or other special characters,
- % but we need to use it in a control sequence name.
- \indexnofonts
- \turnoffactive
- \xdef\safefloattype{\floattype}%
- }%
- %
- % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
- \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
- \ifhavexrefs
- % if the user said @listoffloats foo but never @float foo.
- \message{\linenumber No `\safefloattype' floats to list.}%
- \fi
- \else
- \begingroup
- \leftskip=\tocindent % indent these entries like a toc
- \let\do=\listoffloatsdo
- \csname floatlist\safefloattype\endcsname
- \endgroup
- \fi
-}
-
-% This is called on each entry in a list of floats. We're passed the
-% xref label, in the form LABEL-title, which is how we save it in the
-% aux file. We strip off the -title and look up \XRLABEL-lof, which
-% has the text we're supposed to typeset here.
-%
-% Figures without xref labels will not be included in the list (since
-% they won't appear in the aux file).
-%
-\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
-\def\listoffloatsdoentry#1-title\finish{{%
- % Can't fully expand XR#1-lof because it can contain anything. Just
- % pass the control sequence. On the other hand, XR#1-pg is just the
- % page number, and we want to fully expand that so we can get a link
- % in pdf output.
- \toksA = \expandafter{\csname XR#1-lof\endcsname}%
- %
- % use the same \entry macro we use to generate the TOC and index.
- \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
- \writeentry
-}}
-
-\message{localization,}
-% and i18n.
-
-% @documentlanguage is usually given very early, just after
-% @setfilename. If done too late, it may not override everything
-% properly. Single argument is the language abbreviation.
-% It would be nice if we could set up a hyphenation file here.
-%
-\parseargdef\documentlanguage{%
- \tex % read txi-??.tex file in plain TeX.
- % Read the file if it exists.
- \openin 1 txi-#1.tex
- \ifeof 1
- \errhelp = \nolanghelp
- \errmessage{Cannot read language file txi-#1.tex}%
- \else
- \input txi-#1.tex
- \fi
- \closein 1
- \endgroup
-}
-\newhelp\nolanghelp{The given language definition file cannot be found or
-is empty. Maybe you need to install it? In the current directory
-should work if nowhere else does.}
-
-
-% @documentencoding should change something in TeX eventually, most
-% likely, but for now just recognize it.
-\let\documentencoding = \comment
-
-
-% Page size parameters.
-%
-\newdimen\defaultparindent \defaultparindent = 15pt
-
-\chapheadingskip = 15pt plus 4pt minus 2pt
-\secheadingskip = 12pt plus 3pt minus 2pt
-\subsecheadingskip = 9pt plus 2pt minus 2pt
-
-% Prevent underfull vbox error messages.
-\vbadness = 10000
-
-% Don't be so finicky about underfull hboxes, either.
-\hbadness = 2000
-
-% Following George Bush, just get rid of widows and orphans.
-\widowpenalty=10000
-\clubpenalty=10000
-
-% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
-% using an old version of TeX, don't do anything. We want the amount of
-% stretch added to depend on the line length, hence the dependence on
-% \hsize. We call this whenever the paper size is set.
-%
-\def\setemergencystretch{%
- \ifx\emergencystretch\thisisundefined
- % Allow us to assign to \emergencystretch anyway.
- \def\emergencystretch{\dimen0}%
- \else
- \emergencystretch = .15\hsize
- \fi
-}
-
-% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
-% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8)
-% physical page width.
-%
-% We also call \setleading{\textleading}, so the caller should define
-% \textleading. The caller should also set \parskip.
-%
-\def\internalpagesizes#1#2#3#4#5#6#7#8{%
- \voffset = #3\relax
- \topskip = #6\relax
- \splittopskip = \topskip
- %
- \vsize = #1\relax
- \advance\vsize by \topskip
- \outervsize = \vsize
- \advance\outervsize by 2\topandbottommargin
- \pageheight = \vsize
- %
- \hsize = #2\relax
- \outerhsize = \hsize
- \advance\outerhsize by 0.5in
- \pagewidth = \hsize
- %
- \normaloffset = #4\relax
- \bindingoffset = #5\relax
- %
- \ifpdf
- \pdfpageheight #7\relax
- \pdfpagewidth #8\relax
- \fi
- %
- \setleading{\textleading}
- %
- \parindent = \defaultparindent
- \setemergencystretch
-}
-
-% @letterpaper (the default).
-\def\letterpaper{{\globaldefs = 1
- \parskip = 3pt plus 2pt minus 1pt
- \textleading = 13.2pt
- %
- % If page is nothing but text, make it come out even.
- \internalpagesizes{46\baselineskip}{6in}%
- {\voffset}{.25in}%
- {\bindingoffset}{36pt}%
- {11in}{8.5in}%
-}}
-
-% Use @smallbook to reset parameters for 7x9.5 (or so) format.
-\def\smallbook{{\globaldefs = 1
- \parskip = 2pt plus 1pt
- \textleading = 12pt
- %
- \internalpagesizes{7.5in}{5in}%
- {\voffset}{.25in}%
- {\bindingoffset}{16pt}%
- {9.25in}{7in}%
- %
- \lispnarrowing = 0.3in
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \defbodyindent = .5cm
-}}
-
-% Use @afourpaper to print on European A4 paper.
-\def\afourpaper{{\globaldefs = 1
- \parskip = 3pt plus 2pt minus 1pt
- \textleading = 13.2pt
- %
- % Double-side printing via postscript on Laserjet 4050
- % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
- % To change the settings for a different printer or situation, adjust
- % \normaloffset until the front-side and back-side texts align. Then
- % do the same for \bindingoffset. You can set these for testing in
- % your texinfo source file like this:
- % @tex
- % \global\normaloffset = -6mm
- % \global\bindingoffset = 10mm
- % @end tex
- \internalpagesizes{51\baselineskip}{160mm}
- {\voffset}{\hoffset}%
- {\bindingoffset}{44pt}%
- {297mm}{210mm}%
- %
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \defbodyindent = 5mm
-}}
-
-% Use @afivepaper to print on European A5 paper.
-% From romildo@urano.iceb.ufop.br, 2 July 2000.
-% He also recommends making @example and @lisp be small.
-\def\afivepaper{{\globaldefs = 1
- \parskip = 2pt plus 1pt minus 0.1pt
- \textleading = 12.5pt
- %
- \internalpagesizes{160mm}{120mm}%
- {\voffset}{\hoffset}%
- {\bindingoffset}{8pt}%
- {210mm}{148mm}%
- %
- \lispnarrowing = 0.2in
- \tolerance = 800
- \hfuzz = 1.2pt
- \contentsrightmargin = 0pt
- \defbodyindent = 2mm
- \tableindent = 12mm
-}}
-
-% A specific text layout, 24x15cm overall, intended for A4 paper.
-\def\afourlatex{{\globaldefs = 1
- \afourpaper
- \internalpagesizes{237mm}{150mm}%
- {\voffset}{4.6mm}%
- {\bindingoffset}{7mm}%
- {297mm}{210mm}%
- %
- % Must explicitly reset to 0 because we call \afourpaper.
- \globaldefs = 0
-}}
-
-% Use @afourwide to print on A4 paper in landscape format.
-\def\afourwide{{\globaldefs = 1
- \afourpaper
- \internalpagesizes{241mm}{165mm}%
- {\voffset}{-2.95mm}%
- {\bindingoffset}{7mm}%
- {297mm}{210mm}%
- \globaldefs = 0
-}}
-
-% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
-% Perhaps we should allow setting the margins, \topskip, \parskip,
-% and/or leading, also. Or perhaps we should compute them somehow.
-%
-\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
-\def\pagesizesyyy#1,#2,#3\finish{{%
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
- \globaldefs = 1
- %
- \parskip = 3pt plus 2pt minus 1pt
- \setleading{\textleading}%
- %
- \dimen0 = #1
- \advance\dimen0 by \voffset
- %
- \dimen2 = \hsize
- \advance\dimen2 by \normaloffset
- %
- \internalpagesizes{#1}{\hsize}%
- {\voffset}{\normaloffset}%
- {\bindingoffset}{44pt}%
- {\dimen0}{\dimen2}%
-}}
-
-% Set default to letter.
-%
-\letterpaper
-
-
-\message{and turning on texinfo input format.}
-
-% Define macros to output various characters with catcode for normal text.
-\catcode`\"=\other
-\catcode`\~=\other
-\catcode`\^=\other
-\catcode`\_=\other
-\catcode`\|=\other
-\catcode`\<=\other
-\catcode`\>=\other
-\catcode`\+=\other
-\catcode`\$=\other
-\def\normaldoublequote{"}
-\def\normaltilde{~}
-\def\normalcaret{^}
-\def\normalunderscore{_}
-\def\normalverticalbar{|}
-\def\normalless{<}
-\def\normalgreater{>}
-\def\normalplus{+}
-\def\normaldollar{$}%$ font-lock fix
-
-% This macro is used to make a character print one way in \tt
-% (where it can probably be output as-is), and another way in other fonts,
-% where something hairier probably needs to be done.
-%
-% #1 is what to print if we are indeed using \tt; #2 is what to print
-% otherwise. Since all the Computer Modern typewriter fonts have zero
-% interword stretch (and shrink), and it is reasonable to expect all
-% typewriter fonts to have this, we can check that font parameter.
-%
-\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
-
-% Same as above, but check for italic font. Actually this also catches
-% non-italic slanted fonts since it is impossible to distinguish them from
-% italic fonts. But since this is only used by $ and it uses \sl anyway
-% this is not a problem.
-\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
-
-% Turn off all special characters except @
-% (and those which the user can use as if they were ordinary).
-% Most of these we simply print from the \tt font, but for some, we can
-% use math or other variants that look better in normal text.
-
-\catcode`\"=\active
-\def\activedoublequote{{\tt\char34}}
-\let"=\activedoublequote
-\catcode`\~=\active
-\def~{{\tt\char126}}
-\chardef\hat=`\^
-\catcode`\^=\active
-\def^{{\tt \hat}}
-
-\catcode`\_=\active
-\def_{\ifusingtt\normalunderscore\_}
-% Subroutine for the previous macro.
-\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
-
-\catcode`\|=\active
-\def|{{\tt\char124}}
-\chardef \less=`\<
-\catcode`\<=\active
-\def<{{\tt \less}}
-\chardef \gtr=`\>
-\catcode`\>=\active
-\def>{{\tt \gtr}}
-\catcode`\+=\active
-\def+{{\tt \char 43}}
-\catcode`\$=\active
-\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
-
-% If a .fmt file is being used, characters that might appear in a file
-% name cannot be active until we have parsed the command line.
-% So turn them off again, and have \everyjob (or @setfilename) turn them on.
-% \otherifyactive is called near the end of this file.
-\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
-
-\catcode`\@=0
-
-% \backslashcurfont outputs one backslash character in current font,
-% as in \char`\\.
-\global\chardef\backslashcurfont=`\\
-\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work
-
-% \rawbackslash defines an active \ to do \backslashcurfont.
-% \otherbackslash defines an active \ to be a literal `\' character with
-% catcode other.
-{\catcode`\\=\active
- @gdef@rawbackslash{@let\=@backslashcurfont}
- @gdef@otherbackslash{@let\=@realbackslash}
-}
-
-% \realbackslash is an actual character `\' with catcode other, and
-% \doublebackslash is two of them (for the pdf outlines).
-{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
-
-% \normalbackslash outputs one backslash in fixed width font.
-\def\normalbackslash{{\tt\backslashcurfont}}
-
-\catcode`\\=\active
-
-% Used sometimes to turn off (effectively) the active characters
-% even after parsing them.
-@def@turnoffactive{%
- @let"=@normaldoublequote
- @let\=@realbackslash
- @let~=@normaltilde
- @let^=@normalcaret
- @let_=@normalunderscore
- @let|=@normalverticalbar
- @let<=@normalless
- @let>=@normalgreater
- @let+=@normalplus
- @let$=@normaldollar %$ font-lock fix
- @unsepspaces
-}
-
-% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'. (Thus, \ is not expandable when this is in
-% effect.)
-%
-@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash}
-
-% Make _ and + \other characters, temporarily.
-% This is canceled by @fixbackslash.
-@otherifyactive
-
-% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
-% That is what \eatinput is for; after that, the `\' should revert to printing
-% a backslash.
-%
-@gdef@eatinput input texinfo{@fixbackslash}
-@global@let\ = @eatinput
-
-% On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\{ in the file would cause an error. This macro tries to fix
-% that, assuming it is called before the first `\' could plausibly occur.
-% Also turn back on active characters that might appear in the input
-% file name, in case not using a pre-dumped format.
-%
-@gdef@fixbackslash{%
- @ifx\@eatinput @let\ = @normalbackslash @fi
- @catcode`+=@active
- @catcode`@_=@active
-}
-
-% Say @foo, not \foo, in error messages.
-@escapechar = `@@
-
-% These look ok in all fonts, so just make them not special.
-@catcode`@& = @other
-@catcode`@# = @other
-@catcode`@% = @other
-
-
-@c Local variables:
-@c eval: (add-hook 'write-file-hooks 'time-stamp)
-@c page-delimiter: "^\\\\message"
-@c time-stamp-start: "def\\\\texinfoversion{"
-@c time-stamp-format: "%:y-%02m-%02d.%02H"
-@c time-stamp-end: "}"
-@c End:
-
-@c vim:sw=2:
-
-@ignore
- arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
-@end ignore
projects / platform / upstream / coreutils.git / commitdiff