for the davinci_emac interface contains.
Required properties:
-- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
+- compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
+ "ti,dm816-emac"
- reg: Offset and length of the register set for the device
- ti,davinci-ctrl-reg-offset: offset to control register
- ti,davinci-ctrl-mod-reg-offset: offset to control module register
i8042.notimeout [HW] Ignore timeout condition signalled by controller
i8042.reset [HW] Reset the controller during init and cleanup
i8042.unlock [HW] Unlock (ignore) the keylock
+ i8042.kbdreset [HW] Reset device connected to KBD port
i810= [HW,DRM]
S: Maintained
F: drivers/media/i2c/aptina-pll.*
-ARASAN COMPACT FLASH PATA CONTROLLER
-M: Viresh Kumar <viresh.linux@gmail.com>
-L: linux-ide@vger.kernel.org
-S: Maintained
-F: include/linux/pata_arasan_cf_data.h
-F: drivers/ata/pata_arasan_cf.c
-
ARC FRAMEBUFFER DRIVER
M: Jaya Kumar <jayalk@intworks.biz>
S: Maintained
M: Oliver Hartkopp <socketcan@hartkopp.net>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
-T: git git://gitorious.org/linux-can/linux-can-next.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
F: Documentation/networking/can.txt
F: net/can/
M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
-T: git git://gitorious.org/linux-can/linux-can-next.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
F: drivers/net/can/
F: include/linux/can/dev.h
INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
M: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-M: Dmitry Torokhov <dtor@mail.ru>
L: linux-input@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-input/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
F: include/linux/lguest*.h
F: tools/lguest/
+LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
+M: Tejun Heo <tj@kernel.org>
+L: linux-ide@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S: Maintained
+F: drivers/ata/
+F: include/linux/ata.h
+F: include/linux/libata.h
+
+LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
+M: Viresh Kumar <viresh.linux@gmail.com>
+L: linux-ide@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S: Maintained
+F: include/linux/pata_arasan_cf_data.h
+F: drivers/ata/pata_arasan_cf.c
+
+LIBATA PATA DRIVERS
+M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+M: Tejun Heo <tj@kernel.org>
+L: linux-ide@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S: Maintained
+F: drivers/ata/pata_*.c
+F: drivers/ata/ata_generic.c
+
+LIBATA SATA AHCI PLATFORM devices support
+M: Hans de Goede <hdegoede@redhat.com>
+M: Tejun Heo <tj@kernel.org>
+L: linux-ide@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S: Maintained
+F: drivers/ata/ahci_platform.c
+F: drivers/ata/libahci_platform.c
+F: include/linux/ahci_platform.h
+
+LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER
+M: Mikael Pettersson <mikpelinux@gmail.com>
+L: linux-ide@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S: Maintained
+F: drivers/ata/sata_promise.*
+
LIBLOCKDEP
M: Sasha Levin <sasha.levin@oracle.com>
S: Maintained
PIN CONTROL SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-gpio@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
S: Maintained
F: drivers/pinctrl/
F: include/linux/pinctrl/
S: Obsolete
F: drivers/net/wireless/prism54/
-PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
-M: Mikael Pettersson <mikpelinux@gmail.com>
-L: linux-ide@vger.kernel.org
-S: Maintained
-F: drivers/ata/sata_promise.*
-
PS3 NETWORK SUPPORT
M: Geoff Levand <geoff@infradead.org>
L: netdev@vger.kernel.org
F: drivers/misc/phantom.c
F: include/uapi/linux/phantom.h
-SERIAL ATA (SATA) SUBSYSTEM
-M: Tejun Heo <tj@kernel.org>
-L: linux-ide@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
-S: Supported
-F: drivers/ata/
-F: include/linux/ata.h
-F: include/linux/libata.h
-
-SERIAL ATA AHCI PLATFORM devices support
-M: Hans de Goede <hdegoede@redhat.com>
-M: Tejun Heo <tj@kernel.org>
-L: linux-ide@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
-S: Supported
-F: drivers/ata/ahci_platform.c
-F: drivers/ata/libahci_platform.c
-F: include/linux/ahci_platform.h
-
SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
L: linux-scsi@vger.kernel.org
#include <linux/moduleloader.h>
#include <linux/vmalloc.h>
-void module_free(struct module *mod, void *module_region)
+void module_arch_freeing_init(struct module *mod)
{
vfree(mod->arch.syminfo);
mod->arch.syminfo = NULL;
-
- vfree(module_region);
}
static inline int check_rela(Elf32_Rela *rela, struct module *module,
return ret;
}
-
-int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
- struct module *module)
-{
- vfree(module->arch.syminfo);
- module->arch.syminfo = NULL;
-
- return 0;
-}
}
/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
+void module_memfree(void *module_region)
{
kfree(module_region);
}
#endif /* !USE_BRL */
void
-module_free (struct module *mod, void *module_region)
+module_arch_freeing_init (struct module *mod)
{
- if (mod && mod->arch.init_unw_table &&
- module_region == mod->module_init) {
+ if (mod->arch.init_unw_table) {
unw_remove_unwind_table(mod->arch.init_unw_table);
mod->arch.init_unw_table = NULL;
}
- vfree(module_region);
}
/* Have we already seen one of these relocations? */
void bpf_jit_free(struct bpf_prog *fp)
{
if (fp->jited)
- module_free(NULL, fp->bpf_func);
+ module_memfree(fp->bpf_func);
bpf_prog_unlock_free(fp);
}
}
/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
+void module_memfree(void *module_region)
{
kfree(module_region);
}
/* Set up to return from userspace; jump to fixed address sigreturn
trampoline on kuser page. */
- regs->ra = (unsigned long) (0x1040);
+ regs->ra = (unsigned long) (0x1044);
/* Set up registers for signal handler */
regs->sp = (unsigned long) frame;
}
#endif
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
+void module_arch_freeing_init(struct module *mod)
{
kfree(mod->arch.section);
mod->arch.section = NULL;
-
- vfree(module_region);
}
/* Additional bytes needed in front of individual sections */
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
+MODULE_ALIAS_CRYPTO("sha1");
MODULE_ALIAS_CRYPTO("sha1-powerpc");
void bpf_jit_free(struct bpf_prog *fp)
{
if (fp->jited)
- module_free(NULL, fp->bpf_func);
+ module_memfree(fp->bpf_func);
bpf_prog_unlock_free(fp);
}
}
#endif
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
+void module_arch_freeing_init(struct module *mod)
{
- if (mod) {
- vfree(mod->arch.syminfo);
- mod->arch.syminfo = NULL;
- }
- vfree(module_region);
+ vfree(mod->arch.syminfo);
+ mod->arch.syminfo = NULL;
}
static void check_rela(Elf_Rela *rela, struct module *me)
* skb_copy_bits takes 4 parameters:
* %r2 = skb pointer
* %r3 = offset into skb data
- * %r4 = length to copy
- * %r5 = pointer to temp buffer
+ * %r4 = pointer to temp buffer
+ * %r5 = length to copy
*/
#define SKBDATA %r8
sk_load_word_slow:
lgr %r9,%r2 # save %r2
- lhi %r4,4 # 4 bytes
- la %r5,160(%r15) # pointer to temp buffer
+ lgr %r3,%r1 # offset
+ la %r4,160(%r15) # pointer to temp buffer
+ lghi %r5,4 # 4 bytes
brasl %r14,skb_copy_bits # get data from skb
l %r5,160(%r15) # load result from temp buffer
ltgr %r2,%r2 # set cc to (%r2 != 0)
sk_load_half_slow:
lgr %r9,%r2 # save %r2
- lhi %r4,2 # 2 bytes
- la %r5,162(%r15) # pointer to temp buffer
+ lgr %r3,%r1 # offset
+ la %r4,162(%r15) # pointer to temp buffer
+ lghi %r5,2 # 2 bytes
brasl %r14,skb_copy_bits # get data from skb
xc 160(2,%r15),160(%r15)
l %r5,160(%r15) # load result from temp buffer
sk_load_byte_slow:
lgr %r9,%r2 # save %r2
- lhi %r4,1 # 1 bytes
- la %r5,163(%r15) # pointer to temp buffer
+ lgr %r3,%r1 # offset
+ la %r4,163(%r15) # pointer to temp buffer
+ lghi %r5,1 # 1 byte
brasl %r14,skb_copy_bits # get data from skb
xc 160(3,%r15),160(%r15)
l %r5,160(%r15) # load result from temp buffer
lgr %r2,%r9 # restore %r2
br %r8
- /* A = (*(u8 *)(skb->data+K) & 0xf) << 2 */
+ /* X = (*(u8 *)(skb->data+K) & 0xf) << 2 */
ENTRY(sk_load_byte_msh)
llgfr %r1,%r3 # extend offset
clr %r11,%r3 # hlen < offset ?
- jle sk_load_byte_slow
+ jle sk_load_byte_msh_slow
lhi %r12,0
ic %r12,0(%r1,%r10) # get byte from skb
nill %r12,0x0f
sk_load_byte_msh_slow:
lgr %r9,%r2 # save %r2
- lhi %r4,2 # 2 bytes
- la %r5,162(%r15) # pointer to temp buffer
+ lgr %r3,%r1 # offset
+ la %r4,163(%r15) # pointer to temp buffer
+ lghi %r5,1 # 1 byte
brasl %r14,skb_copy_bits # get data from skb
xc 160(3,%r15),160(%r15)
l %r12,160(%r15) # load result from temp buffer
mask = 0x800000; /* je */
kbranch: /* Emit compare if the branch targets are different */
if (filter->jt != filter->jf) {
- if (K <= 16383)
- /* chi %r5,<K> */
- EMIT4_IMM(0xa75e0000, K);
- else if (test_facility(21))
+ if (test_facility(21))
/* clfi %r5,<K> */
EMIT6_IMM(0xc25f0000, K);
else
- /* c %r5,<d(K)>(%r13) */
- EMIT4_DISP(0x5950d000, EMIT_CONST(K));
+ /* cl %r5,<d(K)>(%r13) */
+ EMIT4_DISP(0x5550d000, EMIT_CONST(K));
}
branch: if (filter->jt == filter->jf) {
if (filter->jt == 0)
if (unlikely(proglen + ilen > oldproglen)) {
pr_err("bpb_jit_compile fatal error\n");
kfree(addrs);
- module_free(NULL, image);
+ module_memfree(image);
return;
}
memcpy(image + proglen, temp, ilen);
void bpf_jit_free(struct bpf_prog *fp)
{
if (fp->jited)
- module_free(NULL, fp->bpf_func);
+ module_memfree(fp->bpf_func);
bpf_prog_unlock_free(fp);
}
/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
+void module_memfree(void *module_region)
{
vfree(module_region);
0, 0, 0, NULL, NULL, 0);
/*
- * FIXME: If module_region == mod->module_init, trim exception
+ * FIXME: Add module_arch_freeing_init to trim exception
* table entries.
*/
}
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, multi buffer accelerated");
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
}
static inline void tramp_free(void *tramp)
{
- module_free(NULL, tramp);
+ module_memfree(tramp);
}
#else
/* Trampolines can only be created if modules are supported */
MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_ALIAS_CRYPTO("aes");
+MODULE_ALIAS_CRYPTO("aes-generic");
module_init(prng_mod_init);
module_exit(prng_mod_fini);
MODULE_ALIAS_CRYPTO("stdrng");
+MODULE_ALIAS_CRYPTO("ansi_cprng");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Blowfish Cipher Algorithm");
MODULE_ALIAS_CRYPTO("blowfish");
+MODULE_ALIAS_CRYPTO("blowfish-generic");
MODULE_DESCRIPTION("Camellia Cipher Algorithm");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CRYPTO("camellia");
+MODULE_ALIAS_CRYPTO("camellia-generic");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Cast5 Cipher Algorithm");
MODULE_ALIAS_CRYPTO("cast5");
+MODULE_ALIAS_CRYPTO("cast5-generic");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Cast6 Cipher Algorithm");
MODULE_ALIAS_CRYPTO("cast6");
+MODULE_ALIAS_CRYPTO("cast6-generic");
MODULE_DESCRIPTION("CRC32c (Castagnoli) calculations wrapper for lib/crc32c");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CRYPTO("crc32c");
+MODULE_ALIAS_CRYPTO("crc32c-generic");
MODULE_SOFTDEP("pre: crc32c");
MODULE_DESCRIPTION("T10 DIF CRC calculation.");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CRYPTO("crct10dif");
+MODULE_ALIAS_CRYPTO("crct10dif-generic");
.cia_decrypt = des3_ede_decrypt } }
} };
-MODULE_ALIAS_CRYPTO("des3_ede");
-
static int __init des_generic_mod_init(void)
{
return crypto_register_algs(des_algs, ARRAY_SIZE(des_algs));
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms");
MODULE_AUTHOR("Dag Arne Osvik <da@osvik.no>");
-MODULE_ALIAS("des");
+MODULE_ALIAS_CRYPTO("des");
+MODULE_ALIAS_CRYPTO("des-generic");
+MODULE_ALIAS_CRYPTO("des3_ede");
+MODULE_ALIAS_CRYPTO("des3_ede-generic");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("GHASH Message Digest Algorithm");
MODULE_ALIAS_CRYPTO("ghash");
+MODULE_ALIAS_CRYPTO("ghash-generic");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Kernel Random Number Generator");
MODULE_ALIAS_CRYPTO("stdrng");
+MODULE_ALIAS_CRYPTO("krng");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION ("Salsa20 stream cipher algorithm");
MODULE_ALIAS_CRYPTO("salsa20");
+MODULE_ALIAS_CRYPTO("salsa20-generic");
MODULE_AUTHOR("Dag Arne Osvik <osvik@ii.uib.no>");
MODULE_ALIAS_CRYPTO("tnepres");
MODULE_ALIAS_CRYPTO("serpent");
+MODULE_ALIAS_CRYPTO("serpent-generic");
MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
MODULE_ALIAS_CRYPTO("sha1");
+MODULE_ALIAS_CRYPTO("sha1-generic");
MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm");
MODULE_ALIAS_CRYPTO("sha224");
+MODULE_ALIAS_CRYPTO("sha224-generic");
MODULE_ALIAS_CRYPTO("sha256");
+MODULE_ALIAS_CRYPTO("sha256-generic");
MODULE_DESCRIPTION("SHA-512 and SHA-384 Secure Hash Algorithms");
MODULE_ALIAS_CRYPTO("sha384");
+MODULE_ALIAS_CRYPTO("sha384-generic");
MODULE_ALIAS_CRYPTO("sha512");
+MODULE_ALIAS_CRYPTO("sha512-generic");
crypto_unregister_algs(tea_algs, ARRAY_SIZE(tea_algs));
}
+MODULE_ALIAS_CRYPTO("tea");
MODULE_ALIAS_CRYPTO("xtea");
MODULE_ALIAS_CRYPTO("xeta");
crypto_unregister_shashes(tgr_algs, ARRAY_SIZE(tgr_algs));
}
+MODULE_ALIAS_CRYPTO("tgr192");
MODULE_ALIAS_CRYPTO("tgr160");
MODULE_ALIAS_CRYPTO("tgr128");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION ("Twofish Cipher Algorithm");
MODULE_ALIAS_CRYPTO("twofish");
+MODULE_ALIAS_CRYPTO("twofish-generic");
crypto_unregister_shashes(wp_algs, ARRAY_SIZE(wp_algs));
}
+MODULE_ALIAS_CRYPTO("wp512");
MODULE_ALIAS_CRYPTO("wp384");
MODULE_ALIAS_CRYPTO("wp256");
config PATA_AT91
tristate "PATA support for AT91SAM9260"
depends on ARM && SOC_AT91SAM9
+ depends on !ARCH_MULTIPLATFORM
help
This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
{ PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */
- { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H RAID */
{ PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */
{ PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */
{ PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */
* xgene_ahci_qc_issue - Issue commands to the device
* @qc: Command to issue
*
- * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot
- * clear the BSY bit after receiving the PIO setup FIS. This results in the dma
- * state machine goes into the CMFatalErrorUpdate state and locks up. By
- * restarting the dma engine, it removes the controller out of lock up state.
+ * Due to Hardware errata for IDENTIFY DEVICE command and PACKET
+ * command of ATAPI protocol set, the controller cannot clear the BSY bit
+ * after receiving the PIO setup FIS. This results in the DMA state machine
+ * going into the CMFatalErrorUpdate state and locks up. By restarting the
+ * DMA engine, it removes the controller out of lock up state.
*/
static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
{
struct xgene_ahci_context *ctx = hpriv->plat_data;
int rc = 0;
- if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA))
+ if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) ||
+ (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET)))
xgene_ahci_restart_engine(ap);
rc = ahci_qc_issue(qc);
*
* Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP
*/
- id[ATA_ID_FEATURE_SUPP] &= ~(1 << 8);
+ id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8));
return 0;
}
devslp = readl(port_mmio + PORT_DEVSLP);
if (!(devslp & PORT_DEVSLP_DSP)) {
- dev_err(ap->host->dev, "port does not support device sleep\n");
+ dev_info(ap->host->dev, "port does not support device sleep\n");
return;
}
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
/* devices that don't properly handle queued TRIM commands */
- { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
- { "Crucial_CT???M500SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
- { "Micron_M550*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
- { "Crucial_CT*M550SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+ { "Micron_M[56]*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "Crucial_CT*SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+
+ /*
+ * As defined, the DRAT (Deterministic Read After Trim) and RZAT
+ * (Return Zero After Trim) flags in the ATA Command Set are
+ * unreliable in the sense that they only define what happens if
+ * the device successfully executed the DSM TRIM command. TRIM
+ * is only advisory, however, and the device is free to silently
+ * ignore all or parts of the request.
+ *
+ * Whitelist drives that are known to reliably return zeroes
+ * after TRIM.
+ */
+
+ /*
+ * The intel 510 drive has buggy DRAT/RZAT. Explicitly exclude
+ * that model before whitelisting all other intel SSDs.
+ */
+ { "INTEL*SSDSC2MH*", NULL, 0, },
+
+ { "INTEL*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "SSD*INTEL*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "Samsung*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "SAMSUNG*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "ST[1248][0248]0[FH]*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },
/*
* Some WD SATA-I drives spin up and down erratically when the link
return NULL;
for (i = 0, tag = ap->last_tag + 1; i < max_queue; i++, tag++) {
- tag = tag < max_queue ? tag : 0;
+ if (ap->flags & ATA_FLAG_LOWTAG)
+ tag = i;
+ else
+ tag = tag < max_queue ? tag : 0;
/* the last tag is reserved for internal command. */
if (tag == ATA_TAG_INTERNAL)
return NULL;
}
+EXPORT_SYMBOL_GPL(ata_get_cmd_descript);
/**
* ata_eh_link_report - report error handling to user
rbuf[15] = lowest_aligned;
if (ata_id_has_trim(args->id)) {
- rbuf[14] |= 0x80; /* TPE */
+ rbuf[14] |= 0x80; /* LBPME */
- if (ata_id_has_zero_after_trim(args->id))
- rbuf[14] |= 0x40; /* TPRZ */
+ if (ata_id_has_zero_after_trim(args->id) &&
+ dev->horkage & ATA_HORKAGE_ZERO_AFTER_TRIM) {
+ ata_dev_info(dev, "Enabling discard_zeroes_data\n");
+ rbuf[14] |= 0x40; /* LBPRZ */
+ }
}
}
-
return 0;
}
DPRINTK("ENTER\n");
cancel_delayed_work_sync(&ap->sff_pio_task);
+
+ /*
+ * We wanna reset the HSM state to IDLE. If we do so without
+ * grabbing the port lock, critical sections protected by it which
+ * expect the HSM state to stay stable may get surprised. For
+ * example, we may set IDLE in between the time
+ * __ata_sff_port_intr() checks for HSM_ST_IDLE and before it calls
+ * ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().
+ */
+ spin_lock_irq(ap->lock);
ap->hsm_task_state = HSM_ST_IDLE;
+ spin_unlock_irq(ap->lock);
+
ap->sff_pio_task_link = NULL;
if (ata_msg_ctl(ap))
if (err) {
dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns"
" %d\n", __func__, err);
- goto error_out;
+ return err;
}
/* Enabe DMA */
sata_dma_regs);
return 0;
-
-error_out:
- dma_dwc_exit(hsdev);
-
- return err;
}
static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
char *ver = (char *)&versionr;
u8 *base = NULL;
int err = 0;
- int irq, rc;
+ int irq;
struct ata_host *host;
struct ata_port_info pi = sata_dwc_port_info[0];
const struct ata_port_info *ppi[] = { &pi, NULL };
if (irq == NO_IRQ) {
dev_err(&ofdev->dev, "no SATA DMA irq\n");
err = -ENODEV;
- goto error_out;
+ goto error_iomap;
}
/* Get physical SATA DMA register base address */
dev_err(&ofdev->dev, "ioremap failed for AHBDMA register"
" address\n");
err = -ENODEV;
- goto error_out;
+ goto error_iomap;
}
/* Save dev for later use in dev_xxx() routines */
host_pvt.dwc_dev = &ofdev->dev;
/* Initialize AHB DMAC */
- dma_dwc_init(hsdev, irq);
+ err = dma_dwc_init(hsdev, irq);
+ if (err)
+ goto error_dma_iomap;
/* Enable SATA Interrupts */
sata_dwc_enable_interrupts(hsdev);
* device discovery process, invoking our port_start() handler &
* error_handler() to execute a dummy Softreset EH session
*/
- rc = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
-
- if (rc != 0)
+ err = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
+ if (err)
dev_err(&ofdev->dev, "failed to activate host");
dev_set_drvdata(&ofdev->dev, host);
error_out:
/* Free SATA DMA resources */
dma_dwc_exit(hsdev);
-
+error_dma_iomap:
+ iounmap((void __iomem *)host_pvt.sata_dma_regs);
error_iomap:
iounmap(base);
error_kmalloc:
/* Free SATA DMA resources */
dma_dwc_exit(hsdev);
+ iounmap((void __iomem *)host_pvt.sata_dma_regs);
iounmap(hsdev->reg_base);
kfree(hsdev);
kfree(host);
/* host flags */
SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
- ATA_FLAG_AN | ATA_FLAG_PMP,
+ ATA_FLAG_AN | ATA_FLAG_PMP | ATA_FLAG_LOWTAG,
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
IRQ_STAT_4PORTS = 0xf,
for (gpio = 0; gpio < CRYSTALCOVE_GPIO_NUM; gpio++) {
if (pending & BIT(gpio)) {
virq = irq_find_mapping(cg->chip.irqdomain, gpio);
- generic_handle_irq(virq);
+ handle_nested_irq(virq);
}
}
return false;
ret = gc->of_xlate(gc, &gg_data->gpiospec, gg_data->flags);
- if (ret < 0)
- return false;
+ if (ret < 0) {
+ /* We've found the gpio chip, but the translation failed.
+ * Return true to stop looking and return the translation
+ * error via out_gpio
+ */
+ gg_data->out_gpio = ERR_PTR(ret);
+ return true;
+ }
gg_data->out_gpio = gpiochip_get_desc(gc, ret);
return true;
return status;
}
-static const DEVICE_ATTR(value, 0644,
+static DEVICE_ATTR(value, 0644,
gpio_value_show, gpio_value_store);
static irqreturn_t gpio_sysfs_irq(int irq, void *priv)
return status ? : size;
}
-static const DEVICE_ATTR(active_low, 0644,
+static DEVICE_ATTR(active_low, 0644,
gpio_active_low_show, gpio_active_low_store);
-static const struct attribute *gpio_attrs[] = {
+static umode_t gpio_is_visible(struct kobject *kobj, struct attribute *attr,
+ int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct gpio_desc *desc = dev_get_drvdata(dev);
+ umode_t mode = attr->mode;
+ bool show_direction = test_bit(FLAG_SYSFS_DIR, &desc->flags);
+
+ if (attr == &dev_attr_direction.attr) {
+ if (!show_direction)
+ mode = 0;
+ } else if (attr == &dev_attr_edge.attr) {
+ if (gpiod_to_irq(desc) < 0)
+ mode = 0;
+ if (!show_direction && test_bit(FLAG_IS_OUT, &desc->flags))
+ mode = 0;
+ }
+
+ return mode;
+}
+
+static struct attribute *gpio_attrs[] = {
+ &dev_attr_direction.attr,
+ &dev_attr_edge.attr,
&dev_attr_value.attr,
&dev_attr_active_low.attr,
NULL,
};
-static const struct attribute_group gpio_attr_group = {
- .attrs = (struct attribute **) gpio_attrs,
+static const struct attribute_group gpio_group = {
+ .attrs = gpio_attrs,
+ .is_visible = gpio_is_visible,
+};
+
+static const struct attribute_group *gpio_groups[] = {
+ &gpio_group,
+ NULL
};
/*
}
static DEVICE_ATTR(ngpio, 0444, chip_ngpio_show, NULL);
-static const struct attribute *gpiochip_attrs[] = {
+static struct attribute *gpiochip_attrs[] = {
&dev_attr_base.attr,
&dev_attr_label.attr,
&dev_attr_ngpio.attr,
NULL,
};
-
-static const struct attribute_group gpiochip_attr_group = {
- .attrs = (struct attribute **) gpiochip_attrs,
-};
+ATTRIBUTE_GROUPS(gpiochip);
/*
* /sys/class/gpio/export ... write-only
goto fail_unlock;
}
- if (!desc->chip->direction_input || !desc->chip->direction_output)
- direction_may_change = false;
+ if (desc->chip->direction_input && desc->chip->direction_output &&
+ direction_may_change) {
+ set_bit(FLAG_SYSFS_DIR, &desc->flags);
+ }
+
spin_unlock_irqrestore(&gpio_lock, flags);
offset = gpio_chip_hwgpio(desc);
if (desc->chip->names && desc->chip->names[offset])
ioname = desc->chip->names[offset];
- dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
- desc, ioname ? ioname : "gpio%u",
- desc_to_gpio(desc));
+ dev = device_create_with_groups(&gpio_class, desc->chip->dev,
+ MKDEV(0, 0), desc, gpio_groups,
+ ioname ? ioname : "gpio%u",
+ desc_to_gpio(desc));
if (IS_ERR(dev)) {
status = PTR_ERR(dev);
goto fail_unlock;
}
- status = sysfs_create_group(&dev->kobj, &gpio_attr_group);
- if (status)
- goto fail_unregister_device;
-
- if (direction_may_change) {
- status = device_create_file(dev, &dev_attr_direction);
- if (status)
- goto fail_unregister_device;
- }
-
- if (gpiod_to_irq(desc) >= 0 && (direction_may_change ||
- !test_bit(FLAG_IS_OUT, &desc->flags))) {
- status = device_create_file(dev, &dev_attr_edge);
- if (status)
- goto fail_unregister_device;
- }
-
set_bit(FLAG_EXPORT, &desc->flags);
mutex_unlock(&sysfs_lock);
return 0;
-fail_unregister_device:
- device_unregister(dev);
fail_unlock:
mutex_unlock(&sysfs_lock);
gpiod_dbg(desc, "%s: status %d\n", __func__, status);
dev = class_find_device(&gpio_class, NULL, desc, match_export);
if (dev) {
gpio_setup_irq(desc, dev, 0);
+ clear_bit(FLAG_SYSFS_DIR, &desc->flags);
clear_bit(FLAG_EXPORT, &desc->flags);
} else
status = -ENODEV;
/* use chip->base for the ID; it's already known to be unique */
mutex_lock(&sysfs_lock);
- dev = device_create(&gpio_class, chip->dev, MKDEV(0, 0), chip,
- "gpiochip%d", chip->base);
- if (!IS_ERR(dev)) {
- status = sysfs_create_group(&dev->kobj,
- &gpiochip_attr_group);
- } else
+ dev = device_create_with_groups(&gpio_class, chip->dev, MKDEV(0, 0),
+ chip, gpiochip_groups,
+ "gpiochip%d", chip->base);
+ if (IS_ERR(dev))
status = PTR_ERR(dev);
+ else
+ status = 0;
chip->exported = (status == 0);
mutex_unlock(&sysfs_lock);
base = gpiochip_find_base(chip->ngpio);
if (base < 0) {
status = base;
- goto unlock;
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ goto err_free_descs;
}
chip->base = base;
}
status = gpiochip_add_to_list(chip);
+ if (status) {
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ goto err_free_descs;
+ }
- if (status == 0) {
- for (id = 0; id < chip->ngpio; id++) {
- struct gpio_desc *desc = &descs[id];
- desc->chip = chip;
-
- /* REVISIT: most hardware initializes GPIOs as
- * inputs (often with pullups enabled) so power
- * usage is minimized. Linux code should set the
- * gpio direction first thing; but until it does,
- * and in case chip->get_direction is not set,
- * we may expose the wrong direction in sysfs.
- */
- desc->flags = !chip->direction_input
- ? (1 << FLAG_IS_OUT)
- : 0;
- }
+ for (id = 0; id < chip->ngpio; id++) {
+ struct gpio_desc *desc = &descs[id];
+
+ desc->chip = chip;
+
+ /* REVISIT: most hardware initializes GPIOs as inputs (often
+ * with pullups enabled) so power usage is minimized. Linux
+ * code should set the gpio direction first thing; but until
+ * it does, and in case chip->get_direction is not set, we may
+ * expose the wrong direction in sysfs.
+ */
+ desc->flags = !chip->direction_input ? (1 << FLAG_IS_OUT) : 0;
}
chip->desc = descs;
of_gpiochip_add(chip);
acpi_gpiochip_add(chip);
- if (status)
- goto fail;
-
status = gpiochip_export(chip);
if (status)
- goto fail;
+ goto err_remove_chip;
pr_debug("%s: registered GPIOs %d to %d on device: %s\n", __func__,
chip->base, chip->base + chip->ngpio - 1,
return 0;
-unlock:
+err_remove_chip:
+ acpi_gpiochip_remove(chip);
+ of_gpiochip_remove(chip);
+ spin_lock_irqsave(&gpio_lock, flags);
+ list_del(&chip->list);
spin_unlock_irqrestore(&gpio_lock, flags);
-fail:
- kfree(descs);
chip->desc = NULL;
+err_free_descs:
+ kfree(descs);
/* failures here can mean systems won't boot... */
pr_err("%s: GPIOs %d..%d (%s) failed to register\n", __func__,
unsigned long flags;
unsigned id;
- acpi_gpiochip_remove(chip);
-
- spin_lock_irqsave(&gpio_lock, flags);
+ gpiochip_unexport(chip);
gpiochip_irqchip_remove(chip);
+
+ acpi_gpiochip_remove(chip);
gpiochip_remove_pin_ranges(chip);
of_gpiochip_remove(chip);
+ spin_lock_irqsave(&gpio_lock, flags);
for (id = 0; id < chip->ngpio; id++) {
if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags))
dev_crit(chip->dev, "REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED\n");
list_del(&chip->list);
spin_unlock_irqrestore(&gpio_lock, flags);
- gpiochip_unexport(chip);
kfree(chip->desc);
chip->desc = NULL;
#define FLAG_OPEN_DRAIN 7 /* Gpio is open drain type */
#define FLAG_OPEN_SOURCE 8 /* Gpio is open source type */
#define FLAG_USED_AS_IRQ 9 /* GPIO is connected to an IRQ */
+#define FLAG_SYSFS_DIR 10 /* show sysfs direction attribute */
#define ID_SHIFT 16 /* add new flags before this one */
kfd_pasid.o kfd_doorbell.o kfd_flat_memory.o \
kfd_process.o kfd_queue.o kfd_mqd_manager.o \
kfd_kernel_queue.o kfd_packet_manager.o \
- kfd_process_queue_manager.o kfd_device_queue_manager.o \
- kfd_interrupt.o
+ kfd_process_queue_manager.o kfd_device_queue_manager.o
obj-$(CONFIG_HSA_AMD) += amdkfd.o
goto kfd_topology_add_device_error;
}
- if (kfd_interrupt_init(kfd)) {
- dev_err(kfd_device,
- "Error initializing interrupts for device (%x:%x)\n",
- kfd->pdev->vendor, kfd->pdev->device);
- goto kfd_interrupt_error;
- }
-
if (!device_iommu_pasid_init(kfd)) {
dev_err(kfd_device,
"Error initializing iommuv2 for device (%x:%x)\n",
device_queue_manager_error:
amd_iommu_free_device(kfd->pdev);
device_iommu_pasid_error:
- kfd_interrupt_exit(kfd);
-kfd_interrupt_error:
kfd_topology_remove_device(kfd);
kfd_topology_add_device_error:
kfd2kgd->fini_sa_manager(kfd->kgd);
if (kfd->init_complete) {
device_queue_manager_uninit(kfd->dqm);
amd_iommu_free_device(kfd->pdev);
- kfd_interrupt_exit(kfd);
kfd_topology_remove_device(kfd);
}
/* This is called directly from KGD at ISR. */
void kgd2kfd_interrupt(struct kfd_dev *kfd, const void *ih_ring_entry)
{
- if (kfd->init_complete) {
- spin_lock(&kfd->interrupt_lock);
-
- if (kfd->interrupts_active
- && enqueue_ih_ring_entry(kfd, ih_ring_entry))
- schedule_work(&kfd->interrupt_work);
-
- spin_unlock(&kfd->interrupt_lock);
- }
+ /* Process interrupts / schedule work as necessary */
}
q->queue);
retval = mqd->load_mqd(mqd, q->mqd, q->pipe,
- q->queue, q->properties.write_ptr);
+ q->queue, (uint32_t __user *) q->properties.write_ptr);
if (retval != 0) {
deallocate_hqd(dqm, q);
mqd->uninit_mqd(mqd, q->mqd, q->mqd_mem_obj);
+++ /dev/null
-/*
- * Copyright 2014 Advanced Micro Devices, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * KFD Interrupts.
- *
- * AMD GPUs deliver interrupts by pushing an interrupt description onto the
- * interrupt ring and then sending an interrupt. KGD receives the interrupt
- * in ISR and sends us a pointer to each new entry on the interrupt ring.
- *
- * We generally can't process interrupt-signaled events from ISR, so we call
- * out to each interrupt client module (currently only the scheduler) to ask if
- * each interrupt is interesting. If they return true, then it requires further
- * processing so we copy it to an internal interrupt ring and call each
- * interrupt client again from a work-queue.
- *
- * There's no acknowledgment for the interrupts we use. The hardware simply
- * queues a new interrupt each time without waiting.
- *
- * The fixed-size internal queue means that it's possible for us to lose
- * interrupts because we have no back-pressure to the hardware.
- */
-
-#include <linux/slab.h>
-#include <linux/device.h>
-#include "kfd_priv.h"
-
-#define KFD_INTERRUPT_RING_SIZE 256
-
-static void interrupt_wq(struct work_struct *);
-
-int kfd_interrupt_init(struct kfd_dev *kfd)
-{
- void *interrupt_ring = kmalloc_array(KFD_INTERRUPT_RING_SIZE,
- kfd->device_info->ih_ring_entry_size,
- GFP_KERNEL);
- if (!interrupt_ring)
- return -ENOMEM;
-
- kfd->interrupt_ring = interrupt_ring;
- kfd->interrupt_ring_size =
- KFD_INTERRUPT_RING_SIZE * kfd->device_info->ih_ring_entry_size;
- atomic_set(&kfd->interrupt_ring_wptr, 0);
- atomic_set(&kfd->interrupt_ring_rptr, 0);
-
- spin_lock_init(&kfd->interrupt_lock);
-
- INIT_WORK(&kfd->interrupt_work, interrupt_wq);
-
- kfd->interrupts_active = true;
-
- /*
- * After this function returns, the interrupt will be enabled. This
- * barrier ensures that the interrupt running on a different processor
- * sees all the above writes.
- */
- smp_wmb();
-
- return 0;
-}
-
-void kfd_interrupt_exit(struct kfd_dev *kfd)
-{
- /*
- * Stop the interrupt handler from writing to the ring and scheduling
- * workqueue items. The spinlock ensures that any interrupt running
- * after we have unlocked sees interrupts_active = false.
- */
- unsigned long flags;
-
- spin_lock_irqsave(&kfd->interrupt_lock, flags);
- kfd->interrupts_active = false;
- spin_unlock_irqrestore(&kfd->interrupt_lock, flags);
-
- /*
- * Flush_scheduled_work ensures that there are no outstanding
- * work-queue items that will access interrupt_ring. New work items
- * can't be created because we stopped interrupt handling above.
- */
- flush_scheduled_work();
-
- kfree(kfd->interrupt_ring);
-}
-
-/*
- * This assumes that it can't be called concurrently with itself
- * but only with dequeue_ih_ring_entry.
- */
-bool enqueue_ih_ring_entry(struct kfd_dev *kfd, const void *ih_ring_entry)
-{
- unsigned int rptr = atomic_read(&kfd->interrupt_ring_rptr);
- unsigned int wptr = atomic_read(&kfd->interrupt_ring_wptr);
-
- if ((rptr - wptr) % kfd->interrupt_ring_size ==
- kfd->device_info->ih_ring_entry_size) {
- /* This is very bad, the system is likely to hang. */
- dev_err_ratelimited(kfd_chardev(),
- "Interrupt ring overflow, dropping interrupt.\n");
- return false;
- }
-
- memcpy(kfd->interrupt_ring + wptr, ih_ring_entry,
- kfd->device_info->ih_ring_entry_size);
-
- wptr = (wptr + kfd->device_info->ih_ring_entry_size) %
- kfd->interrupt_ring_size;
- smp_wmb(); /* Ensure memcpy'd data is visible before wptr update. */
- atomic_set(&kfd->interrupt_ring_wptr, wptr);
-
- return true;
-}
-
-/*
- * This assumes that it can't be called concurrently with itself
- * but only with enqueue_ih_ring_entry.
- */
-static bool dequeue_ih_ring_entry(struct kfd_dev *kfd, void *ih_ring_entry)
-{
- /*
- * Assume that wait queues have an implicit barrier, i.e. anything that
- * happened in the ISR before it queued work is visible.
- */
-
- unsigned int wptr = atomic_read(&kfd->interrupt_ring_wptr);
- unsigned int rptr = atomic_read(&kfd->interrupt_ring_rptr);
-
- if (rptr == wptr)
- return false;
-
- memcpy(ih_ring_entry, kfd->interrupt_ring + rptr,
- kfd->device_info->ih_ring_entry_size);
-
- rptr = (rptr + kfd->device_info->ih_ring_entry_size) %
- kfd->interrupt_ring_size;
-
- /*
- * Ensure the rptr write update is not visible until
- * memcpy has finished reading.
- */
- smp_mb();
- atomic_set(&kfd->interrupt_ring_rptr, rptr);
-
- return true;
-}
-
-static void interrupt_wq(struct work_struct *work)
-{
- struct kfd_dev *dev = container_of(work, struct kfd_dev,
- interrupt_work);
-
- uint32_t ih_ring_entry[DIV_ROUND_UP(
- dev->device_info->ih_ring_entry_size,
- sizeof(uint32_t))];
-
- while (dequeue_ih_ring_entry(dev, ih_ring_entry))
- ;
-}
struct kgd2kfd_shared_resources shared_resources;
- void *interrupt_ring;
- size_t interrupt_ring_size;
- atomic_t interrupt_ring_rptr;
- atomic_t interrupt_ring_wptr;
- struct work_struct interrupt_work;
- spinlock_t interrupt_lock;
-
/* QCM Device instance */
struct device_queue_manager *dqm;
bool init_complete;
- /*
- * Interrupts of interest to KFD are copied
- * from the HW ring into a SW ring.
- */
- bool interrupts_active;
};
/* KGD2KFD callbacks */
struct kfd_dev *kfd_topology_enum_kfd_devices(uint8_t idx);
/* Interrupts */
-int kfd_interrupt_init(struct kfd_dev *dev);
-void kfd_interrupt_exit(struct kfd_dev *dev);
void kgd2kfd_interrupt(struct kfd_dev *kfd, const void *ih_ring_entry);
-bool enqueue_ih_ring_entry(struct kfd_dev *kfd, const void *ih_ring_entry);
/* Power Management */
void kgd2kfd_suspend(struct kfd_dev *kfd);
int i, j, rc = 0;
int start;
- drm_modeset_lock_all(dev);
+ if (__drm_modeset_lock_all(dev, !!oops_in_progress)) {
+ return -EBUSY;
+ }
if (!drm_fb_helper_is_bound(fb_helper)) {
drm_modeset_unlock_all(dev);
return -EBUSY;
int ret = 0;
int i;
- drm_modeset_lock_all(dev);
+ if (__drm_modeset_lock_all(dev, !!oops_in_progress)) {
+ return -EBUSY;
+ }
if (!drm_fb_helper_is_bound(fb_helper)) {
drm_modeset_unlock_all(dev);
return -EBUSY;
if (!is_exynos)
return -ENODEV;
- /*
- * Register device object only in case of Exynos SoC.
- *
- * Below codes resolves temporarily infinite loop issue incurred
- * by Exynos drm driver when using multi-platform kernel.
- * So these codes will be replaced with more generic way later.
- */
- if (!of_machine_is_compatible("samsung,exynos3") &&
- !of_machine_is_compatible("samsung,exynos4") &&
- !of_machine_is_compatible("samsung,exynos5"))
- return -ENODEV;
-
exynos_drm_pdev = platform_device_register_simple("exynos-drm", -1,
NULL, 0);
if (IS_ERR(exynos_drm_pdev))
static void hdmiphy_conf_reset(struct hdmi_context *hdata)
{
- u8 buffer[2];
u32 reg;
clk_disable_unprepare(hdata->res.sclk_hdmi);
clk_prepare_enable(hdata->res.sclk_hdmi);
/* operation mode */
- buffer[0] = 0x1f;
- buffer[1] = 0x00;
-
- if (hdata->hdmiphy_port)
- i2c_master_send(hdata->hdmiphy_port, buffer, 2);
+ hdmiphy_reg_writeb(hdata, HDMIPHY_MODE_SET_DONE,
+ HDMI_PHY_ENABLE_MODE_SET);
if (hdata->type == HDMI_TYPE13)
reg = HDMI_V13_PHY_RSTOUT;
static void mixer_wait_for_vblank(struct exynos_drm_manager *mgr)
{
struct mixer_context *mixer_ctx = mgr_to_mixer(mgr);
+ int err;
mutex_lock(&mixer_ctx->mixer_mutex);
if (!mixer_ctx->powered) {
}
mutex_unlock(&mixer_ctx->mixer_mutex);
- drm_vblank_get(mgr->crtc->dev, mixer_ctx->pipe);
+ err = drm_vblank_get(mgr->crtc->dev, mixer_ctx->pipe);
+ if (err < 0) {
+ DRM_DEBUG_KMS("failed to acquire vblank counter\n");
+ return;
+ }
atomic_set(&mixer_ctx->wait_vsync_event, 1);
return ret;
}
- pm_runtime_enable(dev);
-
return 0;
}
struct mixer_context *ctx = dev_get_drvdata(dev);
mixer_mgr_remove(&ctx->manager);
-
- pm_runtime_disable(dev);
}
static const struct component_ops mixer_component_ops = {
if (!mutex_is_locked(mutex))
return false;
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_MUTEXES)
+#if defined(CONFIG_SMP) && !defined(CONFIG_DEBUG_MUTEXES)
return mutex->owner == task;
#else
/* Since UP may be pre-empted, we cannot assume that we own the lock */
spin_unlock_irq(&dev_priv->irq_lock);
}
+u32 gen6_sanitize_rps_pm_mask(struct drm_i915_private *dev_priv, u32 mask)
+{
+ /*
+ * SNB,IVB can while VLV,CHV may hard hang on looping batchbuffer
+ * if GEN6_PM_UP_EI_EXPIRED is masked.
+ *
+ * TODO: verify if this can be reproduced on VLV,CHV.
+ */
+ if (INTEL_INFO(dev_priv)->gen <= 7 && !IS_HASWELL(dev_priv))
+ mask &= ~GEN6_PM_RP_UP_EI_EXPIRED;
+
+ if (INTEL_INFO(dev_priv)->gen >= 8)
+ mask &= ~GEN8_PMINTR_REDIRECT_TO_NON_DISP;
+
+ return mask;
+}
+
void gen6_disable_rps_interrupts(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
spin_lock_irq(&dev_priv->irq_lock);
- I915_WRITE(GEN6_PMINTRMSK, INTEL_INFO(dev_priv)->gen >= 8 ?
- ~GEN8_PMINTR_REDIRECT_TO_NON_DISP : ~0);
+ I915_WRITE(GEN6_PMINTRMSK, gen6_sanitize_rps_pm_mask(dev_priv, ~0));
__gen6_disable_pm_irq(dev_priv, dev_priv->pm_rps_events);
I915_WRITE(gen6_pm_ier(dev_priv), I915_READ(gen6_pm_ier(dev_priv)) &
if (obj->tiling_mode != work->old_fb_obj->tiling_mode)
/* vlv: DISPLAY_FLIP fails to change tiling */
ring = NULL;
- } else if (IS_IVYBRIDGE(dev)) {
+ } else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
ring = &dev_priv->ring[BCS];
} else if (INTEL_INFO(dev)->gen >= 7) {
ring = obj->ring;
void gen6_reset_rps_interrupts(struct drm_device *dev);
void gen6_enable_rps_interrupts(struct drm_device *dev);
void gen6_disable_rps_interrupts(struct drm_device *dev);
+u32 gen6_sanitize_rps_pm_mask(struct drm_i915_private *dev_priv, u32 mask);
void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv);
void intel_runtime_pm_enable_interrupts(struct drm_i915_private *dev_priv);
static inline bool intel_irqs_enabled(struct drm_i915_private *dev_priv)
mask |= dev_priv->pm_rps_events & (GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED);
mask &= dev_priv->pm_rps_events;
- /* IVB and SNB hard hangs on looping batchbuffer
- * if GEN6_PM_UP_EI_EXPIRED is masked.
- */
- if (INTEL_INFO(dev_priv->dev)->gen <= 7 && !IS_HASWELL(dev_priv->dev))
- mask |= GEN6_PM_RP_UP_EI_EXPIRED;
-
- if (IS_GEN8(dev_priv->dev))
- mask |= GEN8_PMINTR_REDIRECT_TO_NON_DISP;
-
- return ~mask;
+ return gen6_sanitize_rps_pm_mask(dev_priv, ~mask);
}
/* gen6_set_rps is called to update the frequency request, but should also be
return;
/* Mask turbo interrupt so that they will not come in between */
- I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
+ I915_WRITE(GEN6_PMINTRMSK,
+ gen6_sanitize_rps_pm_mask(dev_priv, ~0));
vlv_force_gfx_clock(dev_priv, true);
radeon_ring_write(ring, 0);
radeon_ring_write(ring, 1 << vm_id);
+ /* wait for the invalidate to complete */
+ radeon_ring_write(ring, PACKET3(PACKET3_WAIT_REG_MEM, 5));
+ radeon_ring_write(ring, (WAIT_REG_MEM_OPERATION(0) | /* wait */
+ WAIT_REG_MEM_FUNCTION(0) | /* always */
+ WAIT_REG_MEM_ENGINE(0))); /* me */
+ radeon_ring_write(ring, VM_INVALIDATE_REQUEST >> 2);
+ radeon_ring_write(ring, 0);
+ radeon_ring_write(ring, 0); /* ref */
+ radeon_ring_write(ring, 0); /* mask */
+ radeon_ring_write(ring, 0x20); /* poll interval */
+
/* compute doesn't have PFP */
if (usepfp) {
/* sync PFP to ME, otherwise we might get invalid PFP reads */
void cik_dma_vm_flush(struct radeon_device *rdev, struct radeon_ring *ring,
unsigned vm_id, uint64_t pd_addr)
{
+ u32 extra_bits = (SDMA_POLL_REG_MEM_EXTRA_OP(0) |
+ SDMA_POLL_REG_MEM_EXTRA_FUNC(0)); /* always */
+
radeon_ring_write(ring, SDMA_PACKET(SDMA_OPCODE_SRBM_WRITE, 0, 0xf000));
if (vm_id < 8) {
radeon_ring_write(ring, (VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (vm_id << 2)) >> 2);
radeon_ring_write(ring, SDMA_PACKET(SDMA_OPCODE_SRBM_WRITE, 0, 0xf000));
radeon_ring_write(ring, VM_INVALIDATE_REQUEST >> 2);
radeon_ring_write(ring, 1 << vm_id);
+
+ radeon_ring_write(ring, SDMA_PACKET(SDMA_OPCODE_POLL_REG_MEM, 0, extra_bits));
+ radeon_ring_write(ring, VM_INVALIDATE_REQUEST >> 2);
+ radeon_ring_write(ring, 0);
+ radeon_ring_write(ring, 0); /* reference */
+ radeon_ring_write(ring, 0); /* mask */
+ radeon_ring_write(ring, (0xfff << 16) | 10); /* retry count, poll interval */
}
radeon_ring_write(ring, PACKET0(VM_INVALIDATE_REQUEST, 0));
radeon_ring_write(ring, 1 << vm_id);
+ /* wait for the invalidate to complete */
+ radeon_ring_write(ring, PACKET3(PACKET3_WAIT_REG_MEM, 5));
+ radeon_ring_write(ring, (WAIT_REG_MEM_FUNCTION(0) | /* always */
+ WAIT_REG_MEM_ENGINE(0))); /* me */
+ radeon_ring_write(ring, VM_INVALIDATE_REQUEST >> 2);
+ radeon_ring_write(ring, 0);
+ radeon_ring_write(ring, 0); /* ref */
+ radeon_ring_write(ring, 0); /* mask */
+ radeon_ring_write(ring, 0x20); /* poll interval */
+
/* sync PFP to ME, otherwise we might get invalid PFP reads */
radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0));
radeon_ring_write(ring, 0x0);
radeon_ring_write(ring, DMA_PACKET(DMA_PACKET_SRBM_WRITE, 0, 0, 0));
radeon_ring_write(ring, (0xf << 16) | (VM_INVALIDATE_REQUEST >> 2));
radeon_ring_write(ring, 1 << vm_id);
+
+ /* wait for invalidate to complete */
+ radeon_ring_write(ring, DMA_SRBM_READ_PACKET);
+ radeon_ring_write(ring, (0xff << 20) | (VM_INVALIDATE_REQUEST >> 2));
+ radeon_ring_write(ring, 0); /* mask */
+ radeon_ring_write(ring, 0); /* value */
}
#define PACKET3_MEM_SEMAPHORE 0x39
#define PACKET3_MPEG_INDEX 0x3A
#define PACKET3_WAIT_REG_MEM 0x3C
+#define WAIT_REG_MEM_FUNCTION(x) ((x) << 0)
+ /* 0 - always
+ * 1 - <
+ * 2 - <=
+ * 3 - ==
+ * 4 - !=
+ * 5 - >=
+ * 6 - >
+ */
+#define WAIT_REG_MEM_MEM_SPACE(x) ((x) << 4)
+ /* 0 - reg
+ * 1 - mem
+ */
+#define WAIT_REG_MEM_ENGINE(x) ((x) << 8)
+ /* 0 - me
+ * 1 - pfp
+ */
#define PACKET3_MEM_WRITE 0x3D
#define PACKET3_PFP_SYNC_ME 0x42
#define PACKET3_SURFACE_SYNC 0x43
(1 << 21) | \
(((n) & 0xFFFFF) << 0))
+#define DMA_SRBM_POLL_PACKET ((9 << 28) | \
+ (1 << 27) | \
+ (1 << 26))
+
+#define DMA_SRBM_READ_PACKET ((9 << 28) | \
+ (1 << 27))
+
/* async DMA Packet types */
#define DMA_PACKET_WRITE 0x2
#define DMA_PACKET_COPY 0x3
.set_wptr = &r100_gfx_set_wptr,
};
+static struct radeon_asic_ring rv515_gfx_ring = {
+ .ib_execute = &r100_ring_ib_execute,
+ .emit_fence = &r300_fence_ring_emit,
+ .emit_semaphore = &r100_semaphore_ring_emit,
+ .cs_parse = &r300_cs_parse,
+ .ring_start = &rv515_ring_start,
+ .ring_test = &r100_ring_test,
+ .ib_test = &r100_ib_test,
+ .is_lockup = &r100_gpu_is_lockup,
+ .get_rptr = &r100_gfx_get_rptr,
+ .get_wptr = &r100_gfx_get_wptr,
+ .set_wptr = &r100_gfx_set_wptr,
+};
+
static struct radeon_asic r300_asic = {
.init = &r300_init,
.fini = &r300_fini,
.set_page = &rv370_pcie_gart_set_page,
},
.ring = {
- [RADEON_RING_TYPE_GFX_INDEX] = &r300_gfx_ring
+ [RADEON_RING_TYPE_GFX_INDEX] = &rv515_gfx_ring
},
.irq = {
.set = &rs600_irq_set,
.set_page = &rv370_pcie_gart_set_page,
},
.ring = {
- [RADEON_RING_TYPE_GFX_INDEX] = &r300_gfx_ring
+ [RADEON_RING_TYPE_GFX_INDEX] = &rv515_gfx_ring
},
.irq = {
.set = &rs600_irq_set,
error_free:
drm_free_large(vm_bos);
- if (r)
+ if (r && r != -ERESTARTSYS)
DRM_ERROR("Couldn't update BO_VA (%d)\n", r);
}
return ret;
}
+struct radeon_dpm_quirk {
+ u32 chip_vendor;
+ u32 chip_device;
+ u32 subsys_vendor;
+ u32 subsys_device;
+};
+
+/* cards with dpm stability problems */
+static struct radeon_dpm_quirk radeon_dpm_quirk_list[] = {
+ /* TURKS - https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1386534 */
+ { PCI_VENDOR_ID_ATI, 0x6759, 0x1682, 0x3195 },
+ /* TURKS - https://bugzilla.kernel.org/show_bug.cgi?id=83731 */
+ { PCI_VENDOR_ID_ATI, 0x6840, 0x1179, 0xfb81 },
+ { 0, 0, 0, 0 },
+};
+
int radeon_pm_init(struct radeon_device *rdev)
{
+ struct radeon_dpm_quirk *p = radeon_dpm_quirk_list;
+ bool disable_dpm = false;
+
+ /* Apply dpm quirks */
+ while (p && p->chip_device != 0) {
+ if (rdev->pdev->vendor == p->chip_vendor &&
+ rdev->pdev->device == p->chip_device &&
+ rdev->pdev->subsystem_vendor == p->subsys_vendor &&
+ rdev->pdev->subsystem_device == p->subsys_device) {
+ disable_dpm = true;
+ break;
+ }
+ ++p;
+ }
+
/* enable dpm on rv6xx+ */
switch (rdev->family) {
case CHIP_RV610:
(!(rdev->flags & RADEON_IS_IGP)) &&
(!rdev->smc_fw))
rdev->pm.pm_method = PM_METHOD_PROFILE;
+ else if (disable_dpm && (radeon_dpm == -1))
+ rdev->pm.pm_method = PM_METHOD_PROFILE;
else if (radeon_dpm == 0)
rdev->pm.pm_method = PM_METHOD_PROFILE;
else
radeon_ring_write(ring, 0);
radeon_ring_write(ring, 1 << vm_id);
+ /* wait for the invalidate to complete */
+ radeon_ring_write(ring, PACKET3(PACKET3_WAIT_REG_MEM, 5));
+ radeon_ring_write(ring, (WAIT_REG_MEM_FUNCTION(0) | /* always */
+ WAIT_REG_MEM_ENGINE(0))); /* me */
+ radeon_ring_write(ring, VM_INVALIDATE_REQUEST >> 2);
+ radeon_ring_write(ring, 0);
+ radeon_ring_write(ring, 0); /* ref */
+ radeon_ring_write(ring, 0); /* mask */
+ radeon_ring_write(ring, 0x20); /* poll interval */
+
/* sync PFP to ME, otherwise we might get invalid PFP reads */
radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0));
radeon_ring_write(ring, 0x0);
radeon_ring_write(ring, DMA_PACKET(DMA_PACKET_SRBM_WRITE, 0, 0, 0, 0));
radeon_ring_write(ring, (0xf << 16) | (VM_INVALIDATE_REQUEST >> 2));
radeon_ring_write(ring, 1 << vm_id);
+
+ /* wait for invalidate to complete */
+ radeon_ring_write(ring, DMA_PACKET(DMA_PACKET_POLL_REG_MEM, 0, 0, 0, 0));
+ radeon_ring_write(ring, VM_INVALIDATE_REQUEST);
+ radeon_ring_write(ring, 0xff << 16); /* retry */
+ radeon_ring_write(ring, 1 << vm_id); /* mask */
+ radeon_ring_write(ring, 0); /* value */
+ radeon_ring_write(ring, (0 << 28) | 0x20); /* func(always) | poll interval */
}
/**
return ret;
}
+struct si_dpm_quirk {
+ u32 chip_vendor;
+ u32 chip_device;
+ u32 subsys_vendor;
+ u32 subsys_device;
+ u32 max_sclk;
+ u32 max_mclk;
+};
+
+/* cards with dpm stability problems */
+static struct si_dpm_quirk si_dpm_quirk_list[] = {
+ /* PITCAIRN - https://bugs.freedesktop.org/show_bug.cgi?id=76490 */
+ { PCI_VENDOR_ID_ATI, 0x6810, 0x1462, 0x3036, 0, 120000 },
+ { 0, 0, 0, 0 },
+};
+
static void si_apply_state_adjust_rules(struct radeon_device *rdev,
struct radeon_ps *rps)
{
u32 mclk, sclk;
u16 vddc, vddci;
u32 max_sclk_vddc, max_mclk_vddci, max_mclk_vddc;
+ u32 max_sclk = 0, max_mclk = 0;
int i;
+ struct si_dpm_quirk *p = si_dpm_quirk_list;
+
+ /* Apply dpm quirks */
+ while (p && p->chip_device != 0) {
+ if (rdev->pdev->vendor == p->chip_vendor &&
+ rdev->pdev->device == p->chip_device &&
+ rdev->pdev->subsystem_vendor == p->subsys_vendor &&
+ rdev->pdev->subsystem_device == p->subsys_device) {
+ max_sclk = p->max_sclk;
+ max_mclk = p->max_mclk;
+ break;
+ }
+ ++p;
+ }
if ((rdev->pm.dpm.new_active_crtc_count > 1) ||
ni_dpm_vblank_too_short(rdev))
if (ps->performance_levels[i].mclk > max_mclk_vddc)
ps->performance_levels[i].mclk = max_mclk_vddc;
}
+ if (max_mclk) {
+ if (ps->performance_levels[i].mclk > max_mclk)
+ ps->performance_levels[i].mclk = max_mclk;
+ }
+ if (max_sclk) {
+ if (ps->performance_levels[i].sclk > max_sclk)
+ ps->performance_levels[i].sclk = max_sclk;
+ }
}
/* XXX validate the min clocks required for display */
#define PACKET3_MPEG_INDEX 0x3A
#define PACKET3_COPY_DW 0x3B
#define PACKET3_WAIT_REG_MEM 0x3C
+#define WAIT_REG_MEM_FUNCTION(x) ((x) << 0)
+ /* 0 - always
+ * 1 - <
+ * 2 - <=
+ * 3 - ==
+ * 4 - !=
+ * 5 - >=
+ * 6 - >
+ */
+#define WAIT_REG_MEM_MEM_SPACE(x) ((x) << 4)
+ /* 0 - reg
+ * 1 - mem
+ */
+#define WAIT_REG_MEM_ENGINE(x) ((x) << 8)
+ /* 0 - me
+ * 1 - pfp
+ */
#define PACKET3_MEM_WRITE 0x3D
#define PACKET3_COPY_DATA 0x40
#define PACKET3_CP_DMA 0x41
#define DMA_PACKET_TRAP 0x7
#define DMA_PACKET_SRBM_WRITE 0x9
#define DMA_PACKET_CONSTANT_FILL 0xd
+#define DMA_PACKET_POLL_REG_MEM 0xe
#define DMA_PACKET_NOP 0xf
#define VCE_STATUS 0x20004
struct mlx4_dev *dev = to_mdev(qp->device)->dev;
int err = 0;
- if (dev->caps.tunnel_offload_mode != MLX4_TUNNEL_OFFLOAD_MODE_VXLAN)
+ if (dev->caps.tunnel_offload_mode != MLX4_TUNNEL_OFFLOAD_MODE_VXLAN ||
+ dev->caps.dmfs_high_steer_mode == MLX4_STEERING_DMFS_A0_STATIC)
return 0; /* do nothing */
ib_flow = flow_attr + 1;
case 7:
case 8:
case 9:
+ case 10:
+ case 13:
etd->hw_version = 4;
break;
default:
},
},
{
+ /* Acer Aspire 7738 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7738"),
+ },
+ },
+ {
/* Gericom Bellagio */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Gericom"),
{ }
};
+/*
+ * Some laptops need keyboard reset before probing for the trackpad to get
+ * it detected, initialised & finally work.
+ */
+static const struct dmi_system_id __initconst i8042_dmi_kbdreset_table[] = {
+ {
+ /* Gigabyte P35 v2 - Elantech touchpad */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P35V2"),
+ },
+ },
+ {
+ /* Aorus branded Gigabyte X3 Plus - Elantech touchpad */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X3"),
+ },
+ },
+ {
+ /* Gigabyte P34 - Elantech touchpad */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P34"),
+ },
+ },
+ { }
+};
+
#endif /* CONFIG_X86 */
#ifdef CONFIG_PNP
if (dmi_check_system(i8042_dmi_dritek_table))
i8042_dritek = true;
+ if (dmi_check_system(i8042_dmi_kbdreset_table))
+ i8042_kbdreset = true;
+
/*
* A20 was already enabled during early kernel init. But some buggy
* BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to
module_param_named(notimeout, i8042_notimeout, bool, 0);
MODULE_PARM_DESC(notimeout, "Ignore timeouts signalled by i8042");
+static bool i8042_kbdreset;
+module_param_named(kbdreset, i8042_kbdreset, bool, 0);
+MODULE_PARM_DESC(kbdreset, "Reset device connected to KBD port");
+
#ifdef CONFIG_X86
static bool i8042_dritek;
module_param_named(dritek, i8042_dritek, bool, 0);
return -1;
/*
+ * Reset keyboard (needed on some laptops to successfully detect
+ * touchpad, e.g., some Gigabyte laptop models with Elantech
+ * touchpads).
+ */
+ if (i8042_kbdreset) {
+ pr_warn("Attempting to reset device connected to KBD port\n");
+ i8042_kbd_write(NULL, (unsigned char) 0xff);
+ }
+
+/*
* Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and
* used it for a PCI card or somethig else.
*/
return ret;
}
- ret = mfd_add_devices(da9052->dev, -1, da9052_subdev_info,
+ ret = mfd_add_devices(da9052->dev, PLATFORM_DEVID_AUTO,
+ da9052_subdev_info,
ARRAY_SIZE(da9052_subdev_info), NULL, 0, NULL);
if (ret) {
dev_err(da9052->dev, "mfd_add_devices failed: %d\n", ret);
#ifdef CONFIG_PM
static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
{
- struct rtsx_ucr *ucr =
- (struct rtsx_ucr *)usb_get_intfdata(intf);
-
dev_dbg(&intf->dev, "%s called with pm message 0x%04x\n",
__func__, message.event);
- /*
- * Call to make sure LED is off during suspend to save more power.
- * It is NOT a permanent state and could be turned on anytime later.
- * Thus no need to call turn_on when resunming.
- */
- mutex_lock(&ucr->dev_mutex);
- rtsx_usb_turn_off_led(ucr);
- mutex_unlock(&ucr->dev_mutex);
-
return 0;
}
}
EXPORT_SYMBOL_GPL(tps65218_clear_bits);
+static const struct regmap_range tps65218_yes_ranges[] = {
+ regmap_reg_range(TPS65218_REG_INT1, TPS65218_REG_INT2),
+ regmap_reg_range(TPS65218_REG_STATUS, TPS65218_REG_STATUS),
+};
+
+static const struct regmap_access_table tps65218_volatile_table = {
+ .yes_ranges = tps65218_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(tps65218_yes_ranges),
+};
+
static struct regmap_config tps65218_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
+ .volatile_table = &tps65218_volatile_table,
};
static const struct regmap_irq tps65218_irqs[] = {
.num_regs = 2,
.mask_base = TPS65218_REG_INT_MASK1,
+ .status_base = TPS65218_REG_INT1,
};
static const struct of_device_id of_tps65218_match_table[] = {
mask = 1 << raminit->bits.start | 1 << raminit->bits.done;
regmap_read(raminit->syscon, raminit->reg, &ctrl);
- /* We clear the done and start bit first. The start bit is
+ /* We clear the start bit first. The start bit is
* looking at the 0 -> transition, but is not self clearing;
- * And we clear the init done bit as well.
* NOTE: DONE must be written with 1 to clear it.
+ * We can't clear the DONE bit here using regmap_update_bits()
+ * as it will bypass the write if initial condition is START:0 DONE:1
+ * e.g. on DRA7 which needs START pulse.
*/
- ctrl &= ~(1 << raminit->bits.start);
- ctrl |= 1 << raminit->bits.done;
- regmap_write(raminit->syscon, raminit->reg, ctrl);
+ ctrl &= ~mask; /* START = 0, DONE = 0 */
+ regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl);
- ctrl &= ~(1 << raminit->bits.done);
- c_can_hw_raminit_wait_syscon(priv, mask, ctrl);
+ /* check if START bit is 0. Ignore DONE bit for now
+ * as it can be either 0 or 1.
+ */
+ c_can_hw_raminit_wait_syscon(priv, 1 << raminit->bits.start, ctrl);
if (enable) {
- /* Set start bit and wait for the done bit. */
+ /* Clear DONE bit & set START bit. */
ctrl |= 1 << raminit->bits.start;
- regmap_write(raminit->syscon, raminit->reg, ctrl);
-
+ /* DONE must be written with 1 to clear it */
+ ctrl |= 1 << raminit->bits.done;
+ regmap_update_bits(raminit->syscon, raminit->reg, mask, ctrl);
+ /* prevent further clearing of DONE bit */
+ ctrl &= ~(1 << raminit->bits.done);
/* clear START bit if start pulse is needed */
if (raminit->needs_pulse) {
ctrl &= ~(1 << raminit->bits.start);
- regmap_write(raminit->syscon, raminit->reg, ctrl);
+ regmap_update_bits(raminit->syscon, raminit->reg,
+ mask, ctrl);
}
ctrl |= 1 << raminit->bits.done;
if (dev->flags & IFF_UP)
return -EBUSY;
cm = nla_data(data[IFLA_CAN_CTRLMODE]);
- if (cm->flags & ~priv->ctrlmode_supported)
+
+ /* check whether changed bits are allowed to be modified */
+ if (cm->mask & ~priv->ctrlmode_supported)
return -EOPNOTSUPP;
+
+ /* clear bits to be modified and copy the flag values */
priv->ctrlmode &= ~cm->mask;
- priv->ctrlmode |= cm->flags;
+ priv->ctrlmode |= (cm->flags & cm->mask);
/* CAN_CTRLMODE_FD can only be set when driver supports FD */
if (priv->ctrlmode & CAN_CTRLMODE_FD)
priv->can.data_bittiming_const = &m_can_data_bittiming_const;
priv->can.do_set_mode = m_can_set_mode;
priv->can.do_get_berr_counter = m_can_get_berr_counter;
+
+ /* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.1 */
+ priv->can.ctrlmode = CAN_CTRLMODE_FD_NON_ISO;
+
+ /* CAN_CTRLMODE_FD_NON_ISO can not be changed with M_CAN IP v3.0.1 */
priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
CAN_CTRLMODE_LISTENONLY |
CAN_CTRLMODE_BERR_REPORTING |
skb = alloc_can_err_skb(priv->netdev, &cf);
if (skb) {
cf->can_id |= CAN_ERR_RESTARTED;
- netif_rx(skb);
stats->rx_packets++;
stats->rx_bytes += cf->can_dlc;
+ netif_rx(skb);
} else {
netdev_err(priv->netdev,
"No memory left for err_skb\n");
priv->can.state = new_state;
- netif_rx(skb);
-
stats->rx_packets++;
stats->rx_bytes += cf->can_dlc;
+ netif_rx(skb);
}
static void kvaser_usb_rx_can_err(const struct kvaser_usb_net_priv *priv,
stats->rx_over_errors++;
stats->rx_errors++;
- netif_rx(skb);
-
stats->rx_packets++;
stats->rx_bytes += cf->can_dlc;
+ netif_rx(skb);
}
}
cf->can_dlc);
}
- netif_rx(skb);
-
stats->rx_packets++;
stats->rx_bytes += cf->can_dlc;
+ netif_rx(skb);
}
static void kvaser_usb_start_chip_reply(const struct kvaser_usb *dev,
if (err)
netdev_warn(netdev, "Cannot stop device, error %d\n", err);
+ /* reset tx contexts */
+ kvaser_usb_unlink_tx_urbs(priv);
+
priv->can.state = CAN_STATE_STOPPED;
close_candev(priv->netdev);
if (!urb) {
netdev_err(netdev, "No memory left for URBs\n");
stats->tx_dropped++;
- goto nourbmem;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
}
buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC);
if (!buf) {
stats->tx_dropped++;
+ dev_kfree_skb(skb);
goto nobufmem;
}
}
}
+ /* This should never happen; it implies a flow control bug */
if (!context) {
netdev_warn(netdev, "cannot find free context\n");
ret = NETDEV_TX_BUSY;
if (unlikely(err)) {
can_free_echo_skb(netdev, context->echo_index);
- skb = NULL; /* set to NULL to avoid double free in
- * dev_kfree_skb(skb) */
-
atomic_dec(&priv->active_tx_urbs);
usb_unanchor_urb(urb);
kfree(buf);
nobufmem:
usb_free_urb(urb);
-nourbmem:
- dev_kfree_skb(skb);
return ret;
}
struct kvaser_usb_net_priv *priv;
int i, err;
+ err = kvaser_usb_send_simple_msg(dev, CMD_RESET_CHIP, channel);
+ if (err)
+ return err;
+
netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS);
if (!netdev) {
dev_err(&intf->dev, "Cannot alloc candev\n");
usb_set_intfdata(intf, dev);
- for (i = 0; i < MAX_NET_DEVICES; i++)
- kvaser_usb_send_simple_msg(dev, CMD_RESET_CHIP, i);
-
err = kvaser_usb_get_software_info(dev);
if (err) {
dev_err(&intf->dev,
bgmac->int_status = 0;
}
- if (handled < weight)
+ if (handled < weight) {
napi_complete(napi);
-
- bgmac_chip_intrs_on(bgmac);
+ bgmac_chip_intrs_on(bgmac);
+ }
return handled;
}
if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n");
+ netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT);
+
err = bgmac_mii_register(bgmac);
if (err) {
bgmac_err(bgmac, "Cannot register MDIO\n");
netif_carrier_off(net_dev);
- netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT);
-
return 0;
err_mii_unregister:
{
struct bgmac *bgmac = bcma_get_drvdata(core);
- netif_napi_del(&bgmac->napi);
unregister_netdev(bgmac->net_dev);
bgmac_mii_unregister(bgmac);
+ netif_napi_del(&bgmac->napi);
bgmac_dma_free(bgmac);
bcma_set_drvdata(core, NULL);
free_netdev(bgmac->net_dev);
* distinguish various types of transports (VxLAN, GRE, NVGRE ..). So, offload
* is expected to work across all types of IP tunnels once exported. Skyhawk
* supports offloads for either VxLAN or NVGRE, exclusively. So we export VxLAN
- * offloads in hw_enc_features only when a VxLAN port is added. Note this only
- * ensures that other tunnels work fine while VxLAN offloads are not enabled.
+ * offloads in hw_enc_features only when a VxLAN port is added. If other (non
+ * VxLAN) tunnels are configured while VxLAN offloads are enabled, offloads for
+ * those other tunnels are unexported on the fly through ndo_features_check().
*
* Skyhawk supports VxLAN offloads only for one UDP dport. So, if the stack
* adds more than one port, disable offloads and don't re-enable them again
struct net_device *dev,
netdev_features_t features)
{
- return vxlan_features_check(skb, features);
+ struct be_adapter *adapter = netdev_priv(dev);
+ u8 l4_hdr = 0;
+
+ /* The code below restricts offload features for some tunneled packets.
+ * Offload features for normal (non tunnel) packets are unchanged.
+ */
+ if (!skb->encapsulation ||
+ !(adapter->flags & BE_FLAGS_VXLAN_OFFLOADS))
+ return features;
+
+ /* It's an encapsulated packet and VxLAN offloads are enabled. We
+ * should disable tunnel offload features if it's not a VxLAN packet,
+ * as tunnel offloads have been enabled only for VxLAN. This is done to
+ * allow other tunneled traffic like GRE work fine while VxLAN
+ * offloads are configured in Skyhawk-R.
+ */
+ switch (vlan_get_protocol(skb)) {
+ case htons(ETH_P_IP):
+ l4_hdr = ip_hdr(skb)->protocol;
+ break;
+ case htons(ETH_P_IPV6):
+ l4_hdr = ipv6_hdr(skb)->nexthdr;
+ break;
+ default:
+ return features;
+ }
+
+ if (l4_hdr != IPPROTO_UDP ||
+ skb->inner_protocol_type != ENCAP_TYPE_ETHER ||
+ skb->inner_protocol != htons(ETH_P_TEB) ||
+ skb_inner_mac_header(skb) - skb_transport_header(skb) !=
+ sizeof(struct udphdr) + sizeof(struct vxlanhdr))
+ return features & ~(NETIF_F_ALL_CSUM | NETIF_F_GSO_MASK);
+
+ return features;
}
#endif
{
int err;
- if (priv->mdev->dev->caps.tunnel_offload_mode != MLX4_TUNNEL_OFFLOAD_MODE_VXLAN)
+ if (priv->mdev->dev->caps.tunnel_offload_mode != MLX4_TUNNEL_OFFLOAD_MODE_VXLAN ||
+ priv->mdev->dev->caps.dmfs_high_steer_mode == MLX4_STEERING_DMFS_A0_STATIC)
return 0; /* do nothing */
err = mlx4_tunnel_steer_add(priv->mdev->dev, addr, priv->port, qpn,
struct mlx4_dev_cap *dev_cap)
{
if (dev->caps.steering_mode == MLX4_STEERING_MODE_DEVICE_MANAGED &&
- dev_cap->flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS &&
- dev->caps.dmfs_high_steer_mode != MLX4_STEERING_DMFS_A0_STATIC)
+ dev_cap->flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS)
dev->caps.tunnel_offload_mode = MLX4_TUNNEL_OFFLOAD_MODE_VXLAN;
else
dev->caps.tunnel_offload_mode = MLX4_TUNNEL_OFFLOAD_MODE_NONE;
if (sp->s2io_entries[i].in_use == MSIX_FLG) {
if (sp->s2io_entries[i].type ==
MSIX_RING_TYPE) {
- sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
+ snprintf(sp->desc[i],
+ sizeof(sp->desc[i]),
+ "%s:MSI-X-%d-RX",
dev->name, i);
err = request_irq(sp->entries[i].vector,
s2io_msix_ring_handle,
sp->s2io_entries[i].arg);
} else if (sp->s2io_entries[i].type ==
MSIX_ALARM_TYPE) {
- sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
+ snprintf(sp->desc[i],
+ sizeof(sp->desc[i]),
+ "%s:MSI-X-%d-TX",
dev->name, i);
err = request_irq(sp->entries[i].vector,
s2io_msix_fifo_handle,
"%s: UDP Fragmentation Offload(UFO) enabled\n",
dev->name);
/* Initialize device name */
- sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
+ snprintf(sp->name, sizeof(sp->name), "%s Neterion %s", dev->name,
+ sp->product_name);
if (vlan_tag_strip)
sp->vlan_strip_flag = 1;
EESR_ECI,
.fdr_value = 0x00000f0f,
+ .trscer_err_mask = DESC_I_RINT8,
+
.apr = 1,
.mpr = 1,
.tpauser = 1,
EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE |
EESR_ECI,
- .trscer_err_mask = DESC_I_RINT8,
-
.apr = 1,
.mpr = 1,
.tpauser = 1,
unsigned long flags;
int ret;
+ if (!mdp->phydev)
+ return -ENODEV;
+
spin_lock_irqsave(&mdp->lock, flags);
ret = phy_ethtool_gset(mdp->phydev, ecmd);
spin_unlock_irqrestore(&mdp->lock, flags);
unsigned long flags;
int ret;
+ if (!mdp->phydev)
+ return -ENODEV;
+
spin_lock_irqsave(&mdp->lock, flags);
/* disable tx and rx */
unsigned long flags;
int ret;
+ if (!mdp->phydev)
+ return -ENODEV;
+
spin_lock_irqsave(&mdp->lock, flags);
ret = phy_start_aneg(mdp->phydev);
spin_unlock_irqrestore(&mdp->lock, flags);
if (mdp->phydev) {
phy_stop(mdp->phydev);
phy_disconnect(mdp->phydev);
+ mdp->phydev = NULL;
}
free_irq(ndev->irq, ndev);
struct sh_eth_private *mdp = netdev_priv(ndev);
int i, ret;
- if (unlikely(!mdp->cd->tsu))
+ if (!mdp->cd->tsu)
return 0;
for (i = 0; i < SH_ETH_TSU_CAM_ENTRIES; i++) {
void *reg_offset = sh_eth_tsu_get_offset(mdp, TSU_ADRH0);
int i;
- if (unlikely(!mdp->cd->tsu))
+ if (!mdp->cd->tsu)
return;
for (i = 0; i < SH_ETH_TSU_CAM_ENTRIES; i++, reg_offset += 8) {
}
}
-/* Multicast reception directions set */
-static void sh_eth_set_multicast_list(struct net_device *ndev)
+/* Update promiscuous flag and multicast filter */
+static void sh_eth_set_rx_mode(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u32 ecmr_bits;
/* Initial condition is MCT = 1, PRM = 0.
* Depending on ndev->flags, set PRM or clear MCT
*/
- ecmr_bits = (sh_eth_read(ndev, ECMR) & ~ECMR_PRM) | ECMR_MCT;
+ ecmr_bits = sh_eth_read(ndev, ECMR) & ~ECMR_PRM;
+ if (mdp->cd->tsu)
+ ecmr_bits |= ECMR_MCT;
if (!(ndev->flags & IFF_MULTICAST)) {
sh_eth_tsu_purge_mcast(ndev);
}
}
}
- } else {
- /* Normal, unicast/broadcast-only mode. */
- ecmr_bits = (ecmr_bits & ~ECMR_PRM) | ECMR_MCT;
}
/* update the ethernet mode */
.ndo_stop = sh_eth_close,
.ndo_start_xmit = sh_eth_start_xmit,
.ndo_get_stats = sh_eth_get_stats,
+ .ndo_set_rx_mode = sh_eth_set_rx_mode,
.ndo_tx_timeout = sh_eth_tx_timeout,
.ndo_do_ioctl = sh_eth_do_ioctl,
.ndo_validate_addr = eth_validate_addr,
.ndo_stop = sh_eth_close,
.ndo_start_xmit = sh_eth_start_xmit,
.ndo_get_stats = sh_eth_get_stats,
- .ndo_set_rx_mode = sh_eth_set_multicast_list,
+ .ndo_set_rx_mode = sh_eth_set_rx_mode,
.ndo_vlan_rx_add_vid = sh_eth_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = sh_eth_vlan_rx_kill_vid,
.ndo_tx_timeout = sh_eth_tx_timeout,
/* allocate memory for RX skbuff array */
rx_ring->rx_skbuff_dma = kmalloc_array(rx_rsize,
sizeof(dma_addr_t), GFP_KERNEL);
- if (rx_ring->rx_skbuff_dma == NULL)
- goto dmamem_err;
+ if (!rx_ring->rx_skbuff_dma) {
+ dma_free_coherent(priv->device,
+ rx_rsize * sizeof(struct sxgbe_rx_norm_desc),
+ rx_ring->dma_rx, rx_ring->dma_rx_phy);
+ goto error;
+ }
rx_ring->rx_skbuff = kmalloc_array(rx_rsize,
sizeof(struct sk_buff *), GFP_KERNEL);
- if (rx_ring->rx_skbuff == NULL)
- goto rxbuff_err;
+ if (!rx_ring->rx_skbuff) {
+ kfree(rx_ring->rx_skbuff_dma);
+ goto error;
+ }
/* initialise the buffers */
for (desc_index = 0; desc_index < rx_rsize; desc_index++) {
err_init_rx_buffers:
while (--desc_index >= 0)
free_rx_ring(priv->device, rx_ring, desc_index);
- kfree(rx_ring->rx_skbuff);
-rxbuff_err:
- kfree(rx_ring->rx_skbuff_dma);
-dmamem_err:
- dma_free_coherent(priv->device,
- rx_rsize * sizeof(struct sxgbe_rx_norm_desc),
- rx_ring->dma_rx, rx_ring->dma_rx_phy);
error:
return -ENOMEM;
}
}
}
- /* Get MAC address if available (DT) */
- if (mac)
- ether_addr_copy(priv->dev->dev_addr, mac);
-
priv = sxgbe_drv_probe(&(pdev->dev), plat_dat, addr);
if (!priv) {
pr_err("%s: main driver probe failed\n", __func__);
goto err_drv_remove;
}
+ /* Get MAC address if available (DT) */
+ if (mac)
+ ether_addr_copy(priv->dev->dev_addr, mac);
+
/* Get the TX/RX IRQ numbers */
for (i = 0, chan = 1; i < SXGBE_TX_QUEUES; i++) {
priv->txq[i]->irq_no = irq_of_parse_and_map(node, chan++);
unsigned short vid)
{
int ret;
- int unreg_mcast_mask;
+ int unreg_mcast_mask = 0;
+ u32 port_mask;
- if (priv->ndev->flags & IFF_ALLMULTI)
- unreg_mcast_mask = ALE_ALL_PORTS;
- else
- unreg_mcast_mask = ALE_PORT_1 | ALE_PORT_2;
+ if (priv->data.dual_emac) {
+ port_mask = (1 << (priv->emac_port + 1)) | ALE_PORT_HOST;
+
+ if (priv->ndev->flags & IFF_ALLMULTI)
+ unreg_mcast_mask = port_mask;
+ } else {
+ port_mask = ALE_ALL_PORTS;
+
+ if (priv->ndev->flags & IFF_ALLMULTI)
+ unreg_mcast_mask = ALE_ALL_PORTS;
+ else
+ unreg_mcast_mask = ALE_PORT_1 | ALE_PORT_2;
+ }
- ret = cpsw_ale_add_vlan(priv->ale, vid,
- ALE_ALL_PORTS << priv->host_port,
- 0, ALE_ALL_PORTS << priv->host_port,
+ ret = cpsw_ale_add_vlan(priv->ale, vid, port_mask, 0, port_mask,
unreg_mcast_mask << priv->host_port);
if (ret != 0)
return ret;
goto clean_vid;
ret = cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
- ALE_ALL_PORTS << priv->host_port,
- ALE_VLAN, vid, 0);
+ port_mask, ALE_VLAN, vid, 0);
if (ret != 0)
goto clean_vlan_ucast;
return 0;
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_mdio.h>
#include <linux/of_irq.h>
#include <linux/of_net.h>
u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS];
u32 rx_addr_type;
const char *phy_id;
-#ifdef CONFIG_OF
struct device_node *phy_node;
-#endif
struct phy_device *phydev;
spinlock_t lock;
/*platform specific members*/
if (priv->int_disable)
priv->int_disable();
+ /* NOTE: Rx Threshold and Misc interrupts are not enabled */
+
+ /* ack rxen only then a new pulse will be generated */
+ emac_write(EMAC_DM646X_MACEOIVECTOR,
+ EMAC_DM646X_MAC_EOI_C0_RXEN);
+
+ /* ack txen- only then a new pulse will be generated */
+ emac_write(EMAC_DM646X_MACEOIVECTOR,
+ EMAC_DM646X_MAC_EOI_C0_TXEN);
+
local_irq_restore(flags);
} else {
* register */
/* NOTE: Rx Threshold and Misc interrupts are not enabled */
-
- /* ack rxen only then a new pulse will be generated */
- emac_write(EMAC_DM646X_MACEOIVECTOR,
- EMAC_DM646X_MAC_EOI_C0_RXEN);
-
- /* ack txen- only then a new pulse will be generated */
- emac_write(EMAC_DM646X_MACEOIVECTOR,
- EMAC_DM646X_MAC_EOI_C0_TXEN);
-
} else {
/* Set DM644x control registers for interrupt control */
emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1);
int i = 0;
struct emac_priv *priv = netdev_priv(ndev);
- pm_runtime_get(&priv->pdev->dev);
+ ret = pm_runtime_get_sync(&priv->pdev->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&priv->pdev->dev);
+ dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
+ __func__, ret);
+ return ret;
+ }
netif_carrier_off(ndev);
for (cnt = 0; cnt < ETH_ALEN; cnt++)
cpdma_ctlr_start(priv->dma);
priv->phydev = NULL;
+
+ if (priv->phy_node) {
+ priv->phydev = of_phy_connect(ndev, priv->phy_node,
+ &emac_adjust_link, 0, 0);
+ if (!priv->phydev) {
+ dev_err(emac_dev, "could not connect to phy %s\n",
+ priv->phy_node->full_name);
+ ret = -ENODEV;
+ goto err;
+ }
+ }
+
/* use the first phy on the bus if pdata did not give us a phy id */
- if (!priv->phy_id) {
+ if (!priv->phydev && !priv->phy_id) {
struct device *phy;
phy = bus_find_device(&mdio_bus_type, NULL, NULL,
priv->phy_id = dev_name(phy);
}
- if (priv->phy_id && *priv->phy_id) {
+ if (!priv->phydev && priv->phy_id && *priv->phy_id) {
priv->phydev = phy_connect(ndev, priv->phy_id,
&emac_adjust_link,
PHY_INTERFACE_MODE_MII);
"(mii_bus:phy_addr=%s, id=%x)\n",
priv->phydev->drv->name, dev_name(&priv->phydev->dev),
priv->phydev->phy_id);
- } else {
+ }
+
+ if (!priv->phydev) {
/* No PHY , fix the link, speed and duplex settings */
dev_notice(emac_dev, "no phy, defaulting to 100/full\n");
priv->link = 1;
struct emac_priv *priv = netdev_priv(ndev);
u32 mac_control;
u32 stats_clear_mask;
+ int err;
+
+ err = pm_runtime_get_sync(&priv->pdev->dev);
+ if (err < 0) {
+ pm_runtime_put_noidle(&priv->pdev->dev);
+ dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
+ __func__, err);
+ return &ndev->stats;
+ }
/* update emac hardware stats and reset the registers*/
ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN);
emac_write(EMAC_TXUNDERRUN, stats_clear_mask);
+ pm_runtime_put(&priv->pdev->dev);
+
return &ndev->stats;
}
static int davinci_emac_probe(struct platform_device *pdev)
{
int rc = 0;
- struct resource *res;
+ struct resource *res, *res_ctrl;
struct net_device *ndev;
struct emac_priv *priv;
unsigned long hw_ram_addr;
return -EBUSY;
}
emac_bus_frequency = clk_get_rate(emac_clk);
+ devm_clk_put(&pdev->dev, emac_clk);
/* TODO: Probe PHY here if possible */
rc = PTR_ERR(priv->remap_addr);
goto no_pdata;
}
+
+ res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res_ctrl) {
+ priv->ctrl_base =
+ devm_ioremap_resource(&pdev->dev, res_ctrl);
+ if (IS_ERR(priv->ctrl_base))
+ goto no_pdata;
+ } else {
+ priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset;
+ }
+
priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset;
ndev->base_addr = (unsigned long)priv->remap_addr;
- priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset;
-
hw_ram_addr = pdata->hw_ram_addr;
if (!hw_ram_addr)
hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset;
ndev->ethtool_ops = ðtool_ops;
netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
+ pm_runtime_enable(&pdev->dev);
+ rc = pm_runtime_get_sync(&pdev->dev);
+ if (rc < 0) {
+ pm_runtime_put_noidle(&pdev->dev);
+ dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n",
+ __func__, rc);
+ goto no_cpdma_chan;
+ }
+
/* register the network device */
SET_NETDEV_DEV(ndev, &pdev->dev);
rc = register_netdev(ndev);
if (rc) {
dev_err(&pdev->dev, "error in register_netdev\n");
rc = -ENODEV;
+ pm_runtime_put(&pdev->dev);
goto no_cpdma_chan;
}
"(regs: %p, irq: %d)\n",
(void *)priv->emac_base_phys, ndev->irq);
}
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_resume(&pdev->dev);
+ pm_runtime_put(&pdev->dev);
return 0;
.hw_ram_addr = 0x01e20000,
};
+static const struct emac_platform_data dm816_emac_data = {
+ .version = EMAC_VERSION_2,
+};
+
static const struct of_device_id davinci_emac_of_match[] = {
{.compatible = "ti,davinci-dm6467-emac", },
{.compatible = "ti,am3517-emac", .data = &am3517_emac_data, },
+ {.compatible = "ti,dm816-emac", .data = &dm816_emac_data, },
{},
};
MODULE_DEVICE_TABLE(of, davinci_emac_of_match);
index &= ~3;
}
- generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
-
- data |= __le32_to_cpu(tmp) & ~mask;
tmp = __cpu_to_le32(data);
generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
index &= ~3;
}
- generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
-
- data |= __le32_to_cpu(tmp) & ~mask;
tmp = __cpu_to_le32(data);
generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
ocp_reg_write(tp, OCP_SRAM_DATA, data);
}
-static u16 sram_read(struct r8152 *tp, u16 addr)
-{
- ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
- return ocp_reg_read(tp, OCP_SRAM_DATA);
-}
-
static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
{
struct r8152 *tp = netdev_priv(netdev);
data = ocp_reg_read(tp, OCP_POWER_CFG);
data |= EN_10M_PLLOFF;
ocp_reg_write(tp, OCP_POWER_CFG, data);
- data = sram_read(tp, SRAM_IMPEDANCE);
- data &= ~RX_DRIVING_MASK;
- sram_write(tp, SRAM_IMPEDANCE, data);
+ sram_write(tp, SRAM_IMPEDANCE, 0x0b13);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
ocp_data |= PFM_PWM_SWITCH;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
- data = sram_read(tp, SRAM_LPF_CFG);
- data |= LPF_AUTO_TUNE;
- sram_write(tp, SRAM_LPF_CFG, data);
+ /* Enable LPF corner auto tune */
+ sram_write(tp, SRAM_LPF_CFG, 0xf70f);
- data = sram_read(tp, SRAM_10M_AMP1);
- data |= GDAC_IB_UPALL;
- sram_write(tp, SRAM_10M_AMP1, data);
- data = sram_read(tp, SRAM_10M_AMP2);
- data |= AMP_DN;
- sram_write(tp, SRAM_10M_AMP2, data);
+ /* Adjust 10M Amplitude */
+ sram_write(tp, SRAM_10M_AMP1, 0x00af);
+ sram_write(tp, SRAM_10M_AMP2, 0x0208);
set_bit(PHY_RESET, &tp->flags);
}
if (pctldev == NULL)
return;
- mutex_lock(&pinctrldev_list_mutex);
mutex_lock(&pctldev->mutex);
-
pinctrl_remove_device_debugfs(pctldev);
+ mutex_unlock(&pctldev->mutex);
if (!IS_ERR(pctldev->p))
pinctrl_put(pctldev->p);
+ mutex_lock(&pinctrldev_list_mutex);
+ mutex_lock(&pctldev->mutex);
/* TODO: check that no pinmuxes are still active? */
list_del(&pctldev->node);
/* Destroy descriptor tree */
{
struct irq_chip *chip = irq_get_chip(irq);
struct rockchip_pin_bank *bank = irq_get_handler_data(irq);
- u32 polarity = 0, data = 0;
u32 pend;
- bool edge_changed = false;
- unsigned long flags;
dev_dbg(bank->drvdata->dev, "got irq for bank %s\n", bank->name);
pend = readl_relaxed(bank->reg_base + GPIO_INT_STATUS);
- if (bank->toggle_edge_mode) {
- polarity = readl_relaxed(bank->reg_base +
- GPIO_INT_POLARITY);
- data = readl_relaxed(bank->reg_base + GPIO_EXT_PORT);
- }
-
while (pend) {
unsigned int virq;
* needs manual intervention.
*/
if (bank->toggle_edge_mode & BIT(irq)) {
- if (data & BIT(irq))
- polarity &= ~BIT(irq);
- else
- polarity |= BIT(irq);
+ u32 data, data_old, polarity;
+ unsigned long flags;
- edge_changed = true;
- }
+ data = readl_relaxed(bank->reg_base + GPIO_EXT_PORT);
+ do {
+ spin_lock_irqsave(&bank->slock, flags);
- generic_handle_irq(virq);
- }
+ polarity = readl_relaxed(bank->reg_base +
+ GPIO_INT_POLARITY);
+ if (data & BIT(irq))
+ polarity &= ~BIT(irq);
+ else
+ polarity |= BIT(irq);
+ writel(polarity,
+ bank->reg_base + GPIO_INT_POLARITY);
- if (bank->toggle_edge_mode && edge_changed) {
- /* Interrupt params should only be set with ints disabled */
- spin_lock_irqsave(&bank->slock, flags);
+ spin_unlock_irqrestore(&bank->slock, flags);
- data = readl_relaxed(bank->reg_base + GPIO_INTEN);
- writel_relaxed(0, bank->reg_base + GPIO_INTEN);
- writel(polarity, bank->reg_base + GPIO_INT_POLARITY);
- writel(data, bank->reg_base + GPIO_INTEN);
+ data_old = data;
+ data = readl_relaxed(bank->reg_base +
+ GPIO_EXT_PORT);
+ } while ((data & BIT(irq)) != (data_old & BIT(irq)));
+ }
- spin_unlock_irqrestore(&bank->slock, flags);
+ generic_handle_irq(virq);
}
chained_irq_exit(chip, desc);
/* load the gpio chip */
xway_chip.dev = &pdev->dev;
- of_gpiochip_add(&xway_chip);
ret = gpiochip_add(&xway_chip);
if (ret) {
- of_gpiochip_remove(&xway_chip);
dev_err(&pdev->dev, "Failed to register gpio chip\n");
return ret;
}
static void msm_pinctrl_setup_pm_reset(struct msm_pinctrl *pctrl)
{
- int i = 0;
+ int i;
const struct msm_function *func = pctrl->soc->functions;
- for (; i <= pctrl->soc->nfunctions; i++)
+ for (i = 0; i < pctrl->soc->nfunctions; i++)
if (!strcmp(func[i].name, "ps_hold")) {
pctrl->restart_nb.notifier_call = msm_ps_hold_restart;
pctrl->restart_nb.priority = 128;
extern int lockdep_genl_is_held(void);
#endif
+/* for synchronisation between af_netlink and genetlink */
+extern atomic_t genl_sk_destructing_cnt;
+extern wait_queue_head_t genl_sk_destructing_waitq;
+
/**
* rcu_dereference_genl - rcu_dereference with debug checking
* @p: The pointer to read, prior to dereferencing
ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity
* led */
ATA_FLAG_NO_DIPM = (1 << 23), /* host not happy with DIPM */
+ ATA_FLAG_LOWTAG = (1 << 24), /* host wants lowest available tag */
/* bits 24:31 of ap->flags are reserved for LLD specific flags */
ATA_HORKAGE_NO_NCQ_TRIM = (1 << 19), /* don't use queued TRIM */
ATA_HORKAGE_NOLPM = (1 << 20), /* don't use LPM */
ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21), /* some WDs have broken LPM */
+ ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
#define module_put_and_exit(code) __module_put_and_exit(THIS_MODULE, code)
#ifdef CONFIG_MODULE_UNLOAD
-unsigned long module_refcount(struct module *mod);
+int module_refcount(struct module *mod);
void __symbol_put(const char *symbol);
#define symbol_put(x) __symbol_put(VMLINUX_SYMBOL_STR(x))
void symbol_put_addr(void *addr);
void *module_alloc(unsigned long size);
/* Free memory returned from module_alloc. */
-void module_free(struct module *mod, void *module_region);
+void module_memfree(void *module_region);
/*
* Apply the given relocation to the (simplified) ELF. Return -error
/* Any cleanup needed when module leaves. */
void module_arch_cleanup(struct module *mod);
+/* Any cleanup before freeing mod->module_init */
+void module_arch_freeing_init(struct module *mod);
#endif
* @maxattr: maximum number of attributes supported
* @netnsok: set to true if the family can handle network
* namespaces and should be presented in all of them
+ * @parallel_ops: operations can be called in parallel and aren't
+ * synchronized by the core genetlink code
* @pre_doit: called before an operation's doit callback, it may
* do additional, common, filtering and return an error
* @post_doit: called after an operation's doit callback, it may
* undo operations done by pre_doit, for example release locks
* @mcast_bind: a socket bound to the given multicast group (which
* is given as the offset into the groups array)
- * @mcast_unbind: a socket was unbound from the given multicast group
+ * @mcast_unbind: a socket was unbound from the given multicast group.
+ * Note that unbind() will not be called symmetrically if the
+ * generic netlink family is removed while there are still open
+ * sockets.
* @attrbuf: buffer to store parsed attributes
* @family_list: family list
* @mcgrps: multicast groups used by this family (private)
#define CAN_CTRLMODE_BERR_REPORTING 0x10 /* Bus-error reporting */
#define CAN_CTRLMODE_FD 0x20 /* CAN FD mode */
#define CAN_CTRLMODE_PRESUME_ACK 0x40 /* Ignore missing CAN ACKs */
+#define CAN_CTRLMODE_FD_NON_ISO 0x80 /* CAN FD in non-ISO mode */
/*
* CAN device statistics
* The complete sysfs path is then /sys/devices/virtual/input/--NAME--
* Usually, it is in the form "inputN"
*/
-#define UI_GET_SYSNAME(len) _IOC(_IOC_READ, UINPUT_IOCTL_BASE, 300, len)
+#define UI_GET_SYSNAME(len) _IOC(_IOC_READ, UINPUT_IOCTL_BASE, 44, len)
/**
* UI_GET_VERSION - Return version of uinput protocol
* the integer pointed to by the ioctl argument. The protocol version
* is hard-coded in the kernel and is independent of the uinput device.
*/
-#define UI_GET_VERSION _IOR(UINPUT_IOCTL_BASE, 301, unsigned int)
+#define UI_GET_VERSION _IOR(UINPUT_IOCTL_BASE, 45, unsigned int)
/*
* To write a force-feedback-capable driver, the upload_effect
void bpf_jit_binary_free(struct bpf_binary_header *hdr)
{
- module_free(NULL, hdr);
+ module_memfree(hdr);
}
#endif /* CONFIG_BPF_JIT */
kdb_printf("%-20s%8u 0x%p ", mod->name,
mod->core_size, (void *)mod);
#ifdef CONFIG_MODULE_UNLOAD
- kdb_printf("%4ld ", module_refcount(mod));
+ kdb_printf("%4d ", module_refcount(mod));
#endif
if (mod->state == MODULE_STATE_GOING)
kdb_printf(" (Unloading)");
static void free_insn_page(void *page)
{
- module_free(NULL, page);
+ module_memfree(page);
}
struct kprobe_insn_cache kprobe_insn_slots = {
return 0;
}
-unsigned long module_refcount(struct module *mod)
+/**
+ * module_refcount - return the refcount or -1 if unloading
+ *
+ * @mod: the module we're checking
+ *
+ * Returns:
+ * -1 if the module is in the process of unloading
+ * otherwise the number of references in the kernel to the module
+ */
+int module_refcount(struct module *mod)
{
- return (unsigned long)atomic_read(&mod->refcnt) - MODULE_REF_BASE;
+ return atomic_read(&mod->refcnt) - MODULE_REF_BASE;
}
EXPORT_SYMBOL(module_refcount);
struct module_use *use;
int printed_something = 0;
- seq_printf(m, " %lu ", module_refcount(mod));
+ seq_printf(m, " %i ", module_refcount(mod));
/*
* Always include a trailing , so userspace can differentiate
static ssize_t show_refcnt(struct module_attribute *mattr,
struct module_kobject *mk, char *buffer)
{
- return sprintf(buffer, "%lu\n", module_refcount(mk->mod));
+ return sprintf(buffer, "%i\n", module_refcount(mk->mod));
}
static struct module_attribute modinfo_refcnt =
static void unset_module_init_ro_nx(struct module *mod) { }
#endif
-void __weak module_free(struct module *mod, void *module_region)
+void __weak module_memfree(void *module_region)
{
vfree(module_region);
}
{
}
+void __weak module_arch_freeing_init(struct module *mod)
+{
+}
+
/* Free a module, remove from lists, etc. */
static void free_module(struct module *mod)
{
/* This may be NULL, but that's OK */
unset_module_init_ro_nx(mod);
- module_free(mod, mod->module_init);
+ module_arch_freeing_init(mod);
+ module_memfree(mod->module_init);
kfree(mod->args);
percpu_modfree(mod);
/* Finally, free the core (containing the module structure) */
unset_module_core_ro_nx(mod);
- module_free(mod, mod->module_core);
+ module_memfree(mod->module_core);
#ifdef CONFIG_MPU
update_protections(current->mm);
*/
kmemleak_ignore(ptr);
if (!ptr) {
- module_free(mod, mod->module_core);
+ module_memfree(mod->module_core);
return -ENOMEM;
}
memset(ptr, 0, mod->init_size);
static void module_deallocate(struct module *mod, struct load_info *info)
{
percpu_modfree(mod);
- module_free(mod, mod->module_init);
- module_free(mod, mod->module_core);
+ module_arch_freeing_init(mod);
+ module_memfree(mod->module_init);
+ module_memfree(mod->module_core);
}
int __weak module_finalize(const Elf_Ehdr *hdr,
#endif
}
+/* For freeing module_init on success, in case kallsyms traversing */
+struct mod_initfree {
+ struct rcu_head rcu;
+ void *module_init;
+};
+
+static void do_free_init(struct rcu_head *head)
+{
+ struct mod_initfree *m = container_of(head, struct mod_initfree, rcu);
+ module_memfree(m->module_init);
+ kfree(m);
+}
+
/* This is where the real work happens */
static int do_init_module(struct module *mod)
{
int ret = 0;
+ struct mod_initfree *freeinit;
+
+ freeinit = kmalloc(sizeof(*freeinit), GFP_KERNEL);
+ if (!freeinit) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ freeinit->module_init = mod->module_init;
/*
* We want to find out whether @mod uses async during init. Clear
if (mod->init != NULL)
ret = do_one_initcall(mod->init);
if (ret < 0) {
- /*
- * Init routine failed: abort. Try to protect us from
- * buggy refcounters.
- */
- mod->state = MODULE_STATE_GOING;
- synchronize_sched();
- module_put(mod);
- blocking_notifier_call_chain(&module_notify_list,
- MODULE_STATE_GOING, mod);
- free_module(mod);
- wake_up_all(&module_wq);
- return ret;
+ goto fail_free_freeinit;
}
if (ret > 0) {
pr_warn("%s: '%s'->init suspiciously returned %d, it should "
mod->strtab = mod->core_strtab;
#endif
unset_module_init_ro_nx(mod);
- module_free(mod, mod->module_init);
+ module_arch_freeing_init(mod);
mod->module_init = NULL;
mod->init_size = 0;
mod->init_ro_size = 0;
mod->init_text_size = 0;
+ /*
+ * We want to free module_init, but be aware that kallsyms may be
+ * walking this with preempt disabled. In all the failure paths,
+ * we call synchronize_rcu/synchronize_sched, but we don't want
+ * to slow down the success path, so use actual RCU here.
+ */
+ call_rcu(&freeinit->rcu, do_free_init);
mutex_unlock(&module_mutex);
wake_up_all(&module_wq);
return 0;
+
+fail_free_freeinit:
+ kfree(freeinit);
+fail:
+ /* Try to protect us from buggy refcounters. */
+ mod->state = MODULE_STATE_GOING;
+ synchronize_sched();
+ module_put(mod);
+ blocking_notifier_call_chain(&module_notify_list,
+ MODULE_STATE_GOING, mod);
+ free_module(mod);
+ wake_up_all(&module_wq);
+ return ret;
}
static int may_init_module(void)
mk->mp->grp.attrs = new_attrs;
/* Tack new one on the end. */
+ memset(&mk->mp->attrs[mk->mp->num], 0, sizeof(mk->mp->attrs[0]));
sysfs_attr_init(&mk->mp->attrs[mk->mp->num].mattr.attr);
mk->mp->attrs[mk->mp->num].param = kp;
mk->mp->attrs[mk->mp->num].mattr.show = param_attr_show;
/* Do not allow runtime DAC changes to make param writable. */
if ((kp->perm & (S_IWUSR | S_IWGRP | S_IWOTH)) != 0)
mk->mp->attrs[mk->mp->num].mattr.store = param_attr_store;
+ else
+ mk->mp->attrs[mk->mp->num].mattr.store = NULL;
mk->mp->attrs[mk->mp->num].mattr.attr.name = (char *)name;
mk->mp->attrs[mk->mp->num].mattr.attr.mode = kp->perm;
mk->mp->num++;
* spin_lock_irq(pool->lock) which may be released and regrabbed
* multiple times. Does GFP_KERNEL allocations. Called only from
* manager.
- *
- * Return:
- * %false if no action was taken and pool->lock stayed locked, %true
- * otherwise.
*/
-static bool maybe_create_worker(struct worker_pool *pool)
+static void maybe_create_worker(struct worker_pool *pool)
__releases(&pool->lock)
__acquires(&pool->lock)
{
- if (!need_to_create_worker(pool))
- return false;
restart:
spin_unlock_irq(&pool->lock);
*/
if (need_to_create_worker(pool))
goto restart;
- return true;
}
/**
* multiple times. Does GFP_KERNEL allocations.
*
* Return:
- * %false if the pool don't need management and the caller can safely start
- * processing works, %true indicates that the function released pool->lock
- * and reacquired it to perform some management function and that the
- * conditions that the caller verified while holding the lock before
- * calling the function might no longer be true.
+ * %false if the pool doesn't need management and the caller can safely
+ * start processing works, %true if management function was performed and
+ * the conditions that the caller verified before calling the function may
+ * no longer be true.
*/
static bool manage_workers(struct worker *worker)
{
struct worker_pool *pool = worker->pool;
- bool ret = false;
/*
* Anyone who successfully grabs manager_arb wins the arbitration
* actual management, the pool may stall indefinitely.
*/
if (!mutex_trylock(&pool->manager_arb))
- return ret;
+ return false;
- ret |= maybe_create_worker(pool);
+ maybe_create_worker(pool);
mutex_unlock(&pool->manager_arb);
- return ret;
+ return true;
}
/**
oldsd->output_queue = NULL;
oldsd->output_queue_tailp = &oldsd->output_queue;
}
- /* Append NAPI poll list from offline CPU. */
- if (!list_empty(&oldsd->poll_list)) {
- list_splice_init(&oldsd->poll_list, &sd->poll_list);
- raise_softirq_irqoff(NET_RX_SOFTIRQ);
+ /* Append NAPI poll list from offline CPU, with one exception :
+ * process_backlog() must be called by cpu owning percpu backlog.
+ * We properly handle process_queue & input_pkt_queue later.
+ */
+ while (!list_empty(&oldsd->poll_list)) {
+ struct napi_struct *napi = list_first_entry(&oldsd->poll_list,
+ struct napi_struct,
+ poll_list);
+
+ list_del_init(&napi->poll_list);
+ if (napi->poll == process_backlog)
+ napi->state = 0;
+ else
+ ____napi_schedule(sd, napi);
}
raise_softirq_irqoff(NET_TX_SOFTIRQ);
netif_rx_internal(skb);
input_queue_head_incr(oldsd);
}
- while ((skb = __skb_dequeue(&oldsd->input_pkt_queue))) {
+ while ((skb = skb_dequeue(&oldsd->input_pkt_queue))) {
netif_rx_internal(skb);
input_queue_head_incr(oldsd);
}
memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err));
sin = &errhdr.offender;
- sin->sin_family = AF_UNSPEC;
+ memset(sin, 0, sizeof(*sin));
if (serr->ee.ee_origin == SO_EE_ORIGIN_ICMP ||
ipv4_pktinfo_prepare_errqueue(sk, skb, serr->ee.ee_origin)) {
- struct inet_sock *inet = inet_sk(sk);
-
sin->sin_family = AF_INET;
sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
- sin->sin_port = 0;
- memset(&sin->sin_zero, 0, sizeof(sin->sin_zero));
- if (inet->cmsg_flags)
+ if (inet_sk(sk)->cmsg_flags)
ip_cmsg_recv(msg, skb);
}
memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err));
sin = &errhdr.offender;
- sin->sin6_family = AF_UNSPEC;
+ memset(sin, 0, sizeof(*sin));
+
if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) {
sin->sin6_family = AF_INET6;
- sin->sin6_flowinfo = 0;
- sin->sin6_port = 0;
if (np->rxopt.all) {
if (serr->ee.ee_origin != SO_EE_ORIGIN_ICMP &&
serr->ee.ee_origin != SO_EE_ORIGIN_ICMP6)
ipv6_iface_scope_id(&sin->sin6_addr,
IP6CB(skb)->iif);
} else {
- struct inet_sock *inet = inet_sk(sk);
-
ipv6_addr_set_v4mapped(ip_hdr(skb)->saddr,
&sin->sin6_addr);
- sin->sin6_scope_id = 0;
- if (inet->cmsg_flags)
+ if (inet_sk(sk)->cmsg_flags)
ip_cmsg_recv(msg, skb);
}
}
struct net *net = dev_net(dst->dev);
rt6->rt6i_flags |= RTF_MODIFIED;
- if (mtu < IPV6_MIN_MTU) {
- u32 features = dst_metric(dst, RTAX_FEATURES);
+ if (mtu < IPV6_MIN_MTU)
mtu = IPV6_MIN_MTU;
- features |= RTAX_FEATURE_ALLFRAG;
- dst_metric_set(dst, RTAX_FEATURES, features);
- }
+
dst_metric_set(dst, RTAX_MTU, mtu);
rt6_update_expires(rt6, net->ipv6.sysctl.ip6_rt_mtu_expires);
}
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- bool ret;
+ bool ret = false;
int ac;
if (local->hw.queues < IEEE80211_NUM_ACS)
#include <linux/rhashtable.h>
#include <asm/cacheflush.h>
#include <linux/hash.h>
+#include <linux/genetlink.h>
#include <net/net_namespace.h>
#include <net/sock.h>
__sk_del_bind_node(sk);
netlink_update_listeners(sk);
}
+ if (sk->sk_protocol == NETLINK_GENERIC)
+ atomic_inc(&genl_sk_destructing_cnt);
netlink_table_ungrab();
}
* will be purged.
*/
+ /* must not acquire netlink_table_lock in any way again before unbind
+ * and notifying genetlink is done as otherwise it might deadlock
+ */
+ if (nlk->netlink_unbind) {
+ int i;
+
+ for (i = 0; i < nlk->ngroups; i++)
+ if (test_bit(i, nlk->groups))
+ nlk->netlink_unbind(sock_net(sk), i + 1);
+ }
+ if (sk->sk_protocol == NETLINK_GENERIC &&
+ atomic_dec_return(&genl_sk_destructing_cnt) == 0)
+ wake_up(&genl_sk_destructing_waitq);
+
sock->sk = NULL;
wake_up_interruptible_all(&nlk->wait);
netlink_table_ungrab();
}
- if (nlk->netlink_unbind) {
- int i;
-
- for (i = 0; i < nlk->ngroups; i++)
- if (test_bit(i, nlk->groups))
- nlk->netlink_unbind(sock_net(sk), i + 1);
- }
kfree(nlk->groups);
nlk->groups = NULL;
#define _AF_NETLINK_H
#include <linux/rhashtable.h>
+#include <linux/atomic.h>
#include <net/sock.h>
#define NLGRPSZ(x) (ALIGN(x, sizeof(unsigned long) * 8) / 8)
static DEFINE_MUTEX(genl_mutex); /* serialization of message processing */
static DECLARE_RWSEM(cb_lock);
+atomic_t genl_sk_destructing_cnt = ATOMIC_INIT(0);
+DECLARE_WAIT_QUEUE_HEAD(genl_sk_destructing_waitq);
+
void genl_lock(void)
{
mutex_lock(&genl_mutex);
genl_lock_all();
- genl_unregister_mc_groups(family);
-
list_for_each_entry(rc, genl_family_chain(family->id), family_list) {
if (family->id != rc->id || strcmp(rc->name, family->name))
continue;
+ genl_unregister_mc_groups(family);
+
list_del(&rc->family_list);
family->n_ops = 0;
- genl_unlock_all();
+ up_write(&cb_lock);
+ wait_event(genl_sk_destructing_waitq,
+ atomic_read(&genl_sk_destructing_cnt) == 0);
+ genl_unlock();
kfree(family->attrbuf);
genl_ctrl_event(CTRL_CMD_DELFAMILY, family, NULL, 0);
static int genl_bind(struct net *net, int group)
{
- int i, err = 0;
+ int i, err = -ENOENT;
down_read(&cb_lock);
for (i = 0; i < GENL_FAM_TAB_SIZE; i++) {
static void genl_unbind(struct net *net, int group)
{
int i;
- bool found = false;
down_read(&cb_lock);
for (i = 0; i < GENL_FAM_TAB_SIZE; i++) {
if (f->mcast_unbind)
f->mcast_unbind(net, fam_grp);
- found = true;
break;
}
}
}
up_read(&cb_lock);
-
- WARN_ON(!found);
}
static int __net_init genl_pernet_init(struct net *net)
sctp_assoc_t associd = 0;
sctp_cmsgs_t cmsgs = { NULL };
sctp_scope_t scope;
- bool fill_sinfo_ttl = false;
+ bool fill_sinfo_ttl = false, wait_connect = false;
struct sctp_datamsg *datamsg;
int msg_flags = msg->msg_flags;
__u16 sinfo_flags = 0;
if (err < 0)
goto out_free;
+ wait_connect = true;
pr_debug("%s: we associated primitively\n", __func__);
}
sctp_datamsg_put(datamsg);
err = msg_len;
+ if (unlikely(wait_connect)) {
+ timeo = sock_sndtimeo(sk, msg_flags & MSG_DONTWAIT);
+ sctp_wait_for_connect(asoc, &timeo);
+ }
+
/* If we are already past ASSOCIATE, the lower
* layers are responsible for association cleanup.
*/
static bool reg_wdev_chan_valid(struct wiphy *wiphy, struct wireless_dev *wdev)
{
- struct ieee80211_channel *ch;
struct cfg80211_chan_def chandef;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
- bool ret = true;
+ enum nl80211_iftype iftype;
wdev_lock(wdev);
+ iftype = wdev->iftype;
+ /* make sure the interface is active */
if (!wdev->netdev || !netif_running(wdev->netdev))
- goto out;
+ goto wdev_inactive_unlock;
- switch (wdev->iftype) {
+ switch (iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
if (!wdev->beacon_interval)
- goto out;
-
- ret = cfg80211_reg_can_beacon(wiphy,
- &wdev->chandef, wdev->iftype);
+ goto wdev_inactive_unlock;
+ chandef = wdev->chandef;
break;
case NL80211_IFTYPE_ADHOC:
if (!wdev->ssid_len)
- goto out;
-
- ret = cfg80211_reg_can_beacon(wiphy,
- &wdev->chandef, wdev->iftype);
+ goto wdev_inactive_unlock;
+ chandef = wdev->chandef;
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
if (!wdev->current_bss ||
!wdev->current_bss->pub.channel)
- goto out;
+ goto wdev_inactive_unlock;
- ch = wdev->current_bss->pub.channel;
- if (rdev->ops->get_channel &&
- !rdev_get_channel(rdev, wdev, &chandef))
- ret = cfg80211_chandef_usable(wiphy, &chandef,
- IEEE80211_CHAN_DISABLED);
- else
- ret = !(ch->flags & IEEE80211_CHAN_DISABLED);
+ if (!rdev->ops->get_channel ||
+ rdev_get_channel(rdev, wdev, &chandef))
+ cfg80211_chandef_create(&chandef,
+ wdev->current_bss->pub.channel,
+ NL80211_CHAN_NO_HT);
break;
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
break;
}
-out:
wdev_unlock(wdev);
- return ret;
+
+ switch (iftype) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_GO:
+ case NL80211_IFTYPE_ADHOC:
+ return cfg80211_reg_can_beacon(wiphy, &chandef, iftype);
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_P2P_CLIENT:
+ return cfg80211_chandef_usable(wiphy, &chandef,
+ IEEE80211_CHAN_DISABLED);
+ default:
+ break;
+ }
+
+ return true;
+
+wdev_inactive_unlock:
+ wdev_unlock(wdev);
+ return true;
}
static void reg_leave_invalid_chans(struct wiphy *wiphy)
# force flags for this arch
$ld .= " -m shlelf_linux";
$objcopy .= " -O elf32-sh-linux";
- $cc .= " -m32";
} elsif ($arch eq "powerpc") {
$local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";
#define CYCLES_PER_SECOND 8000
#define TICKS_PER_SECOND (TICKS_PER_CYCLE * CYCLES_PER_SECOND)
-#define TRANSFER_DELAY_TICKS 0x2e00 /* 479.17 µs */
+/*
+ * Nominally 3125 bytes/second, but the MIDI port's clock might be
+ * 1% too slow, and the bus clock 100 ppm too fast.
+ */
+#define MIDI_BYTES_PER_SECOND 3093
+
+/*
+ * Several devices look only at the first eight data blocks.
+ * In any case, this is more than enough for the MIDI data rate.
+ */
+#define MAX_MIDI_RX_BLOCKS 8
+
+#define TRANSFER_DELAY_TICKS 0x2e00 /* 479.17 µs */
/* isochronous header parameters */
#define ISO_DATA_LENGTH_SHIFT 16
s->callbacked = false;
s->sync_slave = NULL;
- s->rx_blocks_for_midi = UINT_MAX;
-
return 0;
}
EXPORT_SYMBOL(amdtp_stream_init);
for (i = 0; i < pcm_channels; i++)
s->pcm_positions[i] = i;
s->midi_position = s->pcm_channels;
+
+ /*
+ * We do not know the actual MIDI FIFO size of most devices. Just
+ * assume two bytes, i.e., one byte can be received over the bus while
+ * the previous one is transmitted over MIDI.
+ * (The value here is adjusted for midi_ratelimit_per_packet().)
+ */
+ s->midi_fifo_limit = rate - MIDI_BYTES_PER_SECOND * s->syt_interval + 1;
}
EXPORT_SYMBOL(amdtp_stream_set_parameters);
}
}
+/*
+ * To avoid sending MIDI bytes at too high a rate, assume that the receiving
+ * device has a FIFO, and track how much it is filled. This values increases
+ * by one whenever we send one byte in a packet, but the FIFO empties at
+ * a constant rate independent of our packet rate. One packet has syt_interval
+ * samples, so the number of bytes that empty out of the FIFO, per packet(!),
+ * is MIDI_BYTES_PER_SECOND * syt_interval / sample_rate. To avoid storing
+ * fractional values, the values in midi_fifo_used[] are measured in bytes
+ * multiplied by the sample rate.
+ */
+static bool midi_ratelimit_per_packet(struct amdtp_stream *s, unsigned int port)
+{
+ int used;
+
+ used = s->midi_fifo_used[port];
+ if (used == 0) /* common shortcut */
+ return true;
+
+ used -= MIDI_BYTES_PER_SECOND * s->syt_interval;
+ used = max(used, 0);
+ s->midi_fifo_used[port] = used;
+
+ return used < s->midi_fifo_limit;
+}
+
+static void midi_rate_use_one_byte(struct amdtp_stream *s, unsigned int port)
+{
+ s->midi_fifo_used[port] += amdtp_rate_table[s->sfc];
+}
+
static void amdtp_fill_midi(struct amdtp_stream *s,
__be32 *buffer, unsigned int frames)
{
u8 *b;
for (f = 0; f < frames; f++) {
- buffer[s->midi_position] = 0;
b = (u8 *)&buffer[s->midi_position];
port = (s->data_block_counter + f) % 8;
- if ((f >= s->rx_blocks_for_midi) ||
- (s->midi[port] == NULL) ||
- (snd_rawmidi_transmit(s->midi[port], b + 1, 1) <= 0))
- b[0] = 0x80;
- else
+ if (f < MAX_MIDI_RX_BLOCKS &&
+ midi_ratelimit_per_packet(s, port) &&
+ s->midi[port] != NULL &&
+ snd_rawmidi_transmit(s->midi[port], &b[1], 1) == 1) {
+ midi_rate_use_one_byte(s, port);
b[0] = 0x81;
+ } else {
+ b[0] = 0x80;
+ b[1] = 0;
+ }
+ b[2] = 0;
+ b[3] = 0;
buffer += s->data_block_quadlets;
}
bool double_pcm_frames;
struct snd_rawmidi_substream *midi[AMDTP_MAX_CHANNELS_FOR_MIDI * 8];
+ int midi_fifo_limit;
+ int midi_fifo_used[AMDTP_MAX_CHANNELS_FOR_MIDI * 8];
/* quirk: fixed interval of dbc between previos/current packets. */
unsigned int tx_dbc_interval;
- /* quirk: the first count of data blocks in an rx packet for MIDI */
- unsigned int rx_blocks_for_midi;
-
bool callbacked;
wait_queue_head_t callback_wait;
struct amdtp_stream *sync_slave;
amdtp_stream_destroy(&bebob->rx_stream);
destroy_both_connections(bebob);
}
- /*
- * The firmware for these devices ignore MIDI messages in more than
- * first 8 data blocks of an received AMDTP packet.
- */
- if (bebob->spec == &maudio_fw410_spec ||
- bebob->spec == &maudio_special_spec)
- bebob->rx_stream.rx_blocks_for_midi = 8;
end:
return err;
}
destroy_stream(efw, &efw->tx_stream);
goto end;
}
- /*
- * Fireworks ignores MIDI messages in more than first 8 data
- * blocks of an received AMDTP packet.
- */
- efw->rx_stream.rx_blocks_for_midi = 8;
/* set IEC61883 compliant mode (actually not fully compliant...) */
err = snd_efw_command_set_tx_mode(efw, SND_EFW_TRANSPORT_MODE_IEC61883);
case USB_ID(0x046d, 0x0807): /* Logitech Webcam C500 */
case USB_ID(0x046d, 0x0808):
case USB_ID(0x046d, 0x0809):
+ case USB_ID(0x046d, 0x0819): /* Logitech Webcam C210 */
case USB_ID(0x046d, 0x081b): /* HD Webcam c310 */
case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */
projects / platform / kernel / linux-rpi.git / commitdiff