configs: ls1028a: Enable DM support for pcf2127 rtc

Enable related configs on all ls1028aqds boards to support pcf2127
rtc DM function.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Alex Marginean <alexm.osslist@gmail.com>
Tested-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 860eabe..489e9b0 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -40,14 +40,6 @@ config ARCH_LS1028A
        select ARCH_EARLY_INIT_R
        select BOARD_EARLY_INIT_F
        select SYS_I2C_MXC
-       select SYS_I2C_MXC_I2C1
-       select SYS_I2C_MXC_I2C2
-       select SYS_I2C_MXC_I2C3
-       select SYS_I2C_MXC_I2C4
-       select SYS_I2C_MXC_I2C5
-       select SYS_I2C_MXC_I2C6
-       select SYS_I2C_MXC_I2C7
-       select SYS_I2C_MXC_I2C8
        select SYS_FSL_ERRATUM_A008997
        select SYS_FSL_ERRATUM_A009007
        select SYS_FSL_ERRATUM_A008514 if !TFABOOT

diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
index c5c5190..3170d81 100644 (file)
--- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028AQDS=y
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SECURE_BOOT=y
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
@@ -8,7 +9,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -31,6 +31,12 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
@@ -51,6 +57,8 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y

diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig
index 7cfcaf0..2da7b1d 100644 (file)
--- a/configs/ls1028aqds_tfa_defconfig
+++ b/configs/ls1028aqds_tfa_defconfig
@@ -1,13 +1,13 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028AQDS=y
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -34,6 +34,12 @@ CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
@@ -54,6 +60,8 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y

diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
index e59ab58..c1e88b5 100644 (file)
--- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028ARDB=y
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SECURE_BOOT=y
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
@@ -8,7 +9,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -31,6 +31,12 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
@@ -51,6 +57,8 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y

diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index ddb1453..4d0c12f 100644 (file)
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -1,13 +1,13 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028ARDB=y
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -34,6 +34,12 @@ CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
@@ -54,6 +60,8 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y