#include <mach/tc.h>
#include <mach/mux.h>
#include <mach/flash.h>
-#include <../plat-omap/fpga.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
+#include "fpga.h"
/* fsample is pretty close to p2-sample */
#include <mach/mux.h>
#include <mach/flash.h>
-#include <../plat-omap/fpga.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/tc.h>
#include <mach/mux.h>
-#include <../plat-omap/fpga.h>
#include <mach/flash.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
+#include "fpga.h"
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <../plat-omap/fpga.h>
-
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
+#include "fpga.h"
static void fpga_mask_irq(struct irq_data *d)
{
/*
- * arch/arm/plat-omap/include/mach/fpga.h
- *
* Interrupt handler for OMAP-1510 FPGA
*
* Copyright (C) 2001 RidgeRun, Inc.
#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
-/* NOTE: most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
- /* offset 0x00 */
- u16 smc91x[8];
- /* offset 0x10 */
- u16 fpga_rev;
- u16 board_rev;
- u16 gpio_outputs;
- u16 leds;
- /* offset 0x18 */
- u16 misc_inputs;
- u16 lan_status;
- u16 lan_reset;
- u16 reserved0;
- /* offset 0x20 */
- u16 ps2_data;
- u16 ps2_ctrl;
- /* plus also 4 rs232 ports ... */
-};
-
/* LEDs definition on debug board (16 LEDs, all physically green) */
#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
#include <linux/platform_data/gpio-omap.h>
#include <linux/slab.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include "fpga.h"
-
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
* debug board (all green), accessed through FPGA registers.
*/
+/* NOTE: most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+ /* offset 0x00 */
+ u16 smc91x[8];
+ /* offset 0x10 */
+ u16 fpga_rev;
+ u16 board_rev;
+ u16 gpio_outputs;
+ u16 leds;
+ /* offset 0x18 */
+ u16 misc_inputs;
+ u16 lan_status;
+ u16 lan_reset;
+ u16 reserved0;
+ /* offset 0x20 */
+ u16 ps2_data;
+ u16 ps2_ctrl;
+ /* plus also 4 rs232 ports ... */
+};
+
static struct h2p2_dbg_fpga __iomem *fpga;
static u16 fpga_led_state;