Device removal must satisfy the profile constraints, otherwise the command
fails. The filesystem must be converted to profile(s) that would allow the
removal. This can typically happen when going down from 2 devices to 1 and
-using the RAID1 profile. See the example section below.
+using the RAID1 profile. See the *TYPICAL USECASES* section below.
+
The operation can take long as it needs to move all data from the device.
+
It is possible to delete the device that was used to mount the filesystem. The
-device entry in mount table will be replaced by another device name with the
-lowest device id.
+device entry in the mount table will be replaced by another device name with
+the lowest device id.
++
+If the filesystem is mounted in degraded mode (-o degraded), special term
+'missing' can be used for 'device'. In that case, the first device that is
+described by the filesystem metadata, but not present at the mount time will be
+removed.
++
+NOTE: In most cases, there is only one missing device in degraded mode,
+otherwise mount fails. If there are two or more devices missing (e.g. possible
+in RAID6), you need specify 'missing' as many times as the number of missing
+devices to remove all of them.
*delete* <device>|<devid> [<device>|<devid>...] <path>::
Alias of remove kept for backward compatibility
The device size of '/dev/sdb' as seen by the filesystem remains unchanged, but
the logical space from 50-100GiB will be unused.
+==== REMOVE DEVICE ====
+
+Device removal must satisfy the profile constraints, otherwise the command
+fails. For example:
+
+ $ btrfs device remove /dev/sda /mnt
+ ERROR: error removing device '/dev/sda': unable to go below two devices on raid1
+
+In order to remove a device, you need to convert the profile in this case:
+
+ $ btrfs balance start -mconvert=dup -dconvert=single /mnt
+ $ btrfs device remove /dev/sda /mnt
+
DEVICE STATS
------------
return !!ret;
}
+#define COMMON_USAGE_REMOVE_DELETE \
+ "If 'missing' is specified for <device>, the first device that is", \
+ "described by the filesystem metadata, but not present at the mount", \
+ "time will be removed. (only in degraded mode)"
+
static const char * const cmd_device_remove_usage[] = {
"btrfs device remove <device>|<devid> [<device>|<devid>...] <path>",
"Remove a device from a filesystem",
+ "",
+ COMMON_USAGE_REMOVE_DELETE,
NULL
};
static const char * const cmd_device_delete_usage[] = {
"btrfs device delete <device>|<devid> [<device>|<devid>...] <path>",
"Remove a device from a filesystem (alias of \"btrfs device remove\")",
+ "",
+ COMMON_USAGE_REMOVE_DELETE,
NULL
};