2008-03-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ Use `install' with multiple files at once for some primaries.
+ With nobase targets, at most 50 files are installed at once,
+ to avoid quadratic string concatenation and line length limits.
+ This isn't yet done with base targets. One hope is that there,
+ the typical file name length is lower. If this turns out to be
+ a problem, it should be revisited.
+
+ * lib/am/inst-vars.am (am__nobase_list): New helper macro for
+ installation of multiple nobase files at once: sorts and lists
+ files keyed by their target directory.
+ * lib/am/data.am (%DIR%%PRIMARY%_INSTALL): No need to set it to
+ $(install_sh_DATA) any more, not even for nobase targets.
+ (install-%DIR%%PRIMARY%): Split base and nobase cases.
+ Rewrite to pass lists of files which all go in the same
+ directory to `install'. In the nobase case, make use of
+ $(am__nobase_list) and $(MKDIR_P) each directory before
+ populating it. Take care of files in source and build trees,
+ and avoid creating directories where no files are to be
+ installed.
+ * lib/am/libs.am (%DIR%LIBRARIES_INSTALL): Likewise.
+ (install-%DIR%LIBRARIES): Likewise.
+ * lib/am/python.am (%DIR%PYTHON_INSTALL): Likewise.
+ (install-%DIR%PYTHON): Likewise. Also take care to keep note of
+ a list for byte compilation after installation.
+ * lib/am/texinfos.am (install-dvi-am, install-html-am)
+ (install-info-am, install-pdf-am, install-ps-am): Use file lists
+ to install multiple files at once.
+ * NEWS: Update.
+ Suggested by Akim Demaille.
+
+2008-03-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
Require unreleased Autoconf for fixed AC_PROG_INSTALL.
* m4/init.m4 (AM_INIT_AUTOMAKE): Bump AC_PREREQ to 2.61-341,
regenerate files.
New in 1.10a:
+* Version requirements:
+
+ - Autoconf 2.61a-341 or greater is required.
+
* Changes to aclocal:
- The autoconf version check implemented by aclocal in aclocal.m4
- install-sh supports -C, which does not update the installed file
(and its time stamps) if the contents did not change.
+ - `make install' now installs multiple files in one `install' invocation
+ for files with DATA, HEADERS, PYTHON, LIBRARIES and TEXINFOS primaries.
+
- The "deleted header file problem" for *.m4 files is avoided by
stub rules. This allows `make' to trigger a rerun of `aclocal'
also if some previously needed macro file has been removed.
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__nobase_list = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == 50) { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir " " files[dir] }'
dist_docDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_doc_DATA) $(dist_noinst_DATA)
ETAGS = etags
install-dist_docDATA: $(dist_doc_DATA)
@$(NORMAL_INSTALL)
test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
- @list='$(dist_doc_DATA)'; for p in $$list; do \
+ @list='$(dist_doc_DATA)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(dist_docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
- $(dist_docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(dist_docDATA_INSTALL) $$list2 '$(DESTDIR)$(docdir)'"; \
+ $(dist_docDATA_INSTALL) $$list2 "$(DESTDIR)$(docdir)"; }
uninstall-dist_docDATA:
@$(NORMAL_UNINSTALL)
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
- @list='$(DVIS)'; for p in $$list; do \
+ @list='$(DVIS)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(dvidir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(dvidir)'"; \
+ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(dvidir)"; }
install-exec-am:
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
+ @list='$(HTMLS)'; list2=; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
+ list2="$$list2 $$d$$p"; \
fi; \
- done
+ done; \
+ test -z "$$list2" || { \
+ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(htmldir)"; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
+ list='$(INFO_DEPS)'; list2=; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
- relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
- echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
- $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
+ list2="$$list2 $$ifile"; \
else : ; fi; \
done; \
- done
+ done; \
+ test -z "$$list2" || { \
+ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(infodir)'"; \
+ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(infodir)"; }
@$(POST_INSTALL)
@if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
+ @list='$(PDFS)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(pdfdir)"; }
install-ps: install-ps-am
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
- @list='$(PSS)'; for p in $$list; do \
+ @list='$(PSS)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(psdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(psdir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(psdir)'"; \
+ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(psdir)"; }
installcheck-am:
maintainer-clean: maintainer-clean-am
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__nobase_list = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == 50) { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir " " files[dir] }'
am__installdirs = "$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(perllibdir)"
dist_perllibDATA_INSTALL = $(INSTALL_DATA)
nodist_perllibDATA_INSTALL = $(INSTALL_DATA)
install-dist_perllibDATA: $(dist_perllib_DATA)
@$(NORMAL_INSTALL)
test -z "$(perllibdir)" || $(MKDIR_P) "$(DESTDIR)$(perllibdir)"
- @list='$(dist_perllib_DATA)'; for p in $$list; do \
+ @list='$(dist_perllib_DATA)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(dist_perllibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(perllibdir)/$$f'"; \
- $(dist_perllibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(perllibdir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(dist_perllibDATA_INSTALL) $$list2 '$(DESTDIR)$(perllibdir)'"; \
+ $(dist_perllibDATA_INSTALL) $$list2 "$(DESTDIR)$(perllibdir)"; }
uninstall-dist_perllibDATA:
@$(NORMAL_UNINSTALL)
install-nodist_perllibDATA: $(nodist_perllib_DATA)
@$(NORMAL_INSTALL)
test -z "$(perllibdir)" || $(MKDIR_P) "$(DESTDIR)$(perllibdir)"
- @list='$(nodist_perllib_DATA)'; for p in $$list; do \
+ @list='$(nodist_perllib_DATA)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(nodist_perllibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(perllibdir)/$$f'"; \
- $(nodist_perllibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(perllibdir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(nodist_perllibDATA_INSTALL) $$list2 '$(DESTDIR)$(perllibdir)'"; \
+ $(nodist_perllibDATA_INSTALL) $$list2 "$(DESTDIR)$(perllibdir)"; }
uninstall-nodist_perllibDATA:
@$(NORMAL_UNINSTALL)
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__nobase_list = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == 50) { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir " " files[dir] }'
am__installdirs = "$(DESTDIR)$(pkgvdatadir)" "$(DESTDIR)$(scriptdir)"
dist_pkgvdataDATA_INSTALL = $(INSTALL_DATA)
dist_scriptDATA_INSTALL = $(INSTALL_DATA)
install-dist_pkgvdataDATA: $(dist_pkgvdata_DATA)
@$(NORMAL_INSTALL)
test -z "$(pkgvdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgvdatadir)"
- @list='$(dist_pkgvdata_DATA)'; for p in $$list; do \
+ @list='$(dist_pkgvdata_DATA)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(dist_pkgvdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgvdatadir)/$$f'"; \
- $(dist_pkgvdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgvdatadir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(dist_pkgvdataDATA_INSTALL) $$list2 '$(DESTDIR)$(pkgvdatadir)'"; \
+ $(dist_pkgvdataDATA_INSTALL) $$list2 "$(DESTDIR)$(pkgvdatadir)"; }
uninstall-dist_pkgvdataDATA:
@$(NORMAL_UNINSTALL)
install-dist_scriptDATA: $(dist_script_DATA)
@$(NORMAL_INSTALL)
test -z "$(scriptdir)" || $(MKDIR_P) "$(DESTDIR)$(scriptdir)"
- @list='$(dist_script_DATA)'; for p in $$list; do \
+ @list='$(dist_script_DATA)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(dist_scriptDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(scriptdir)/$$f'"; \
- $(dist_scriptDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(scriptdir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(dist_scriptDATA_INSTALL) $$list2 '$(DESTDIR)$(scriptdir)'"; \
+ $(dist_scriptDATA_INSTALL) $$list2 "$(DESTDIR)$(scriptdir)"; }
uninstall-dist_scriptDATA:
@$(NORMAL_UNINSTALL)
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__nobase_list = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == 50) { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir " " files[dir] }'
am__installdirs = "$(DESTDIR)$(amdir)"
dist_amDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_am_DATA)
install-dist_amDATA: $(dist_am_DATA)
@$(NORMAL_INSTALL)
test -z "$(amdir)" || $(MKDIR_P) "$(DESTDIR)$(amdir)"
- @list='$(dist_am_DATA)'; for p in $$list; do \
+ @list='$(dist_am_DATA)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(dist_amDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(amdir)/$$f'"; \
- $(dist_amDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(amdir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(dist_amDATA_INSTALL) $$list2 '$(DESTDIR)$(amdir)'"; \
+ $(dist_amDATA_INSTALL) $$list2 "$(DESTDIR)$(amdir)"; }
uninstall-dist_amDATA:
@$(NORMAL_UNINSTALL)
## automake - create Makefile.in from Makefile.am
-## Copyright (C) 1994, 1995, 1996, 1998, 1999, 2001, 2003, 2004, 2006, 2007
-## Free Software Foundation, Inc.
+## Copyright (C) 1994, 1995, 1996, 1998, 1999, 2001, 2003, 2004, 2006,
+## 2007, 2008 Free Software Foundation, Inc.
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
if %?INSTALL%
am__installdirs += "$(DESTDIR)$(%NDIR%dir)"
-?BASE?%DIR%%PRIMARY%_INSTALL = $(INSTALL_%ONE_PRIMARY%)
-?!BASE?%DIR%%PRIMARY%_INSTALL = $(install_sh_DATA)
+%DIR%%PRIMARY%_INSTALL = $(INSTALL_%ONE_PRIMARY%)
.PHONY install-%EXEC?exec:data%-am: install-%DIR%%PRIMARY%
install-%DIR%%PRIMARY%: $(%DIR%_%PRIMARY%)
@$(NORMAL_INSTALL)
test -z "$(%NDIR%dir)" || $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)"
-?!BASE? @$(am__vpath_adj_setup) \
+if %?BASE%
## Funny invocation because Makefile variable can be empty, leading to
## a syntax error in sh.
- %BASE?@%list='$(%DIR%_%PRIMARY%)'; for p in $$list; do \
+ @list='$(%DIR%_%PRIMARY%)'; list2=; for p in $$list; do \
## A file can be in the source directory or the build directory.
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
## If the _%PRIMARY% variable has an entry like foo/bar, install it as
## $(destdir)/bar, not $(destdir)/foo/bar. The user can make a
## new dir variable or use a nobase_ target for the latter case.
- %BASE?$(am__strip_dir):$(am__vpath_adj)% \
- echo " $(%DIR%%PRIMARY%_INSTALL) '$$d$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
- $(%DIR%%PRIMARY%_INSTALL) "$$d$$p" "$(DESTDIR)$(%NDIR%dir)/$$f"; \
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(%DIR%%PRIMARY%_INSTALL) $$list2 '$(DESTDIR)$(%NDIR%dir)'"; \
+ $(%DIR%%PRIMARY%_INSTALL) $$list2 "$(DESTDIR)$(%NDIR%dir)"; }
+else !%?BASE%
+ @list='$(%DIR%_%PRIMARY%)'; $(am__nobase_list) | \
+ while read dir files; do \
+ xfiles=; for file in $$files; do \
+ if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+ else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+ test -z "$$xfiles" || { \
+ test "x$$dir" = x. || { \
+ echo "$(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \
+ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)/$$dir"; }; \
+ echo " $(%DIR%%PRIMARY%_INSTALL) $$xfiles '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \
+ $(%DIR%%PRIMARY%_INSTALL) $$xfiles "$(DESTDIR)$(%NDIR%dir)/$$dir"; }; \
done
+endif !%?BASE%
endif %?INSTALL%
## automake - create Makefile.in from Makefile.am
-## Copyright (C) 2004, 2007 Free Software Foundation, Inc.
+## Copyright (C) 2004, 2007, 2008 Free Software Foundation, Inc.
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
esac;
## Strip all directories.
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+## Take a $list of nobase files, collect them, indexed by their
+## srcdir-stripped dirnames. For up to 50 files, output a line
+## containing the dirname and the files, space-separated.
+## The arbitrary limit helps avoid the quadratic scaling exhibited by
+## string concatenation in most shells, and should avoid line length
+## limitations, while still offering only negligible performance impact
+## through spawning more install commands than absolutely needed.
+am__nobase_list = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == 50) { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir " " files[dir] }'
endif %?FIRST%
## automake - create Makefile.in from Makefile.am
-## Copyright (C) 1994, 1995, 1996, 1998, 1999, 2001, 2002, 2003, 2004, 2006, 2007
-## Free Software Foundation, Inc.
+## Copyright (C) 1994, 1995, 1996, 1998, 1999, 2001, 2002, 2003, 2004, 2006,
+## 2007, 2008 Free Software Foundation, Inc.
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
if %?INSTALL%
am__installdirs += "$(DESTDIR)$(%NDIR%dir)"
-%DIR%LIBRARIES_INSTALL = %BASE?$(INSTALL_DATA):$(install_sh_DATA)%
+%DIR%LIBRARIES_INSTALL = $(INSTALL_DATA)
.PHONY install-%EXEC?exec:data%-am: install-%DIR%LIBRARIES
install-%DIR%LIBRARIES: $(%DIR%_LIBRARIES)
@$(NORMAL_INSTALL)
test -z "$(%NDIR%dir)" || $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)"
+if %?BASE%
## Funny invocation because Makefile variable can be empty, leading to
## a syntax error in sh.
- @list='$(%DIR%_LIBRARIES)'; for p in $$list; do \
+ @list='$(%DIR%_LIBRARIES)'; list2=; for p in $$list; do \
if test -f $$p; then \
-## Compute basename of source file. Unless this is a nobase_ target, we
-## want to install 'python/foo.py' as '$(DESTDIR)$(%NDIR%dir)/foo.yo',
-## not '$(DESTDIR)$(%NDIR%dir)/python/foo.yo'.
- %BASE?$(am__strip_dir):f=$$p;% \
- echo " $(%DIR%LIBRARIES_INSTALL) '$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
- $(%DIR%LIBRARIES_INSTALL) "$$p" "$(DESTDIR)$(%NDIR%dir)/$$f"; \
+ list2="$$list2 $$p"; \
else :; fi; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(%DIR%LIBRARIES_INSTALL) $$list2 '$(DESTDIR)$(%NDIR%dir)'"; \
+ $(%DIR%LIBRARIES_INSTALL) $$list2 "$(DESTDIR)$(%NDIR%dir)"; }
+else !%?BASE%
+## Funny invocation because Makefile variable can be empty, leading to
+## a syntax error in sh.
+ @list='$(%DIR%_LIBRARIES)'; $(am__nobase_list) | \
+ while read dir files; do \
+ xfiles=; for p in $$files; do \
+ if test -f "$$p"; then xfiles="$$xfiles $$p"; else :; fi; done; \
+ test -z "$$xfiles" || { \
+ test "x$$dir" = x. || { \
+ echo "$(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \
+ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)/$$dir"; }; \
+ echo " $(%DIR%%PRIMARY%_INSTALL) $$xfiles '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \
+ $(%DIR%%PRIMARY%_INSTALL) $$xfiles "$(DESTDIR)$(%NDIR%dir)/$$dir"; }; \
done
+endif !%?BASE%
## We do two loops here so that $(POST_INSTALL) can be empty. If we
## merge the two loops, we get a syntax error from sh. Anyway, having
## $(POST_INSTALL) in the middle of the loop essentially renders it
## automake - create Makefile.in from Makefile.am
-## Copyright (C) 1999, 2001, 2003, 2004, 2006, 2007 Free Software Foundation, Inc.
+## Copyright (C) 1999, 2001, 2003, 2004, 2006, 2007, 2008 Free Software
+## Foundation, Inc.
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
if %?INSTALL%
am__installdirs += "$(DESTDIR)$(%NDIR%dir)"
-%DIR%PYTHON_INSTALL = %BASE?$(INSTALL_DATA):$(install_sh_DATA)%
+%DIR%PYTHON_INSTALL = $(INSTALL_DATA)
.PHONY install-%EXEC?exec:data%-am: install-%DIR%PYTHON
install-%DIR%PYTHON: $(%DIR%_PYTHON)
@$(NORMAL_INSTALL)
test -z "$(%NDIR%dir)" || $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)"
-?!BASE? @$(am__vpath_adj_setup) \
- %BASE?@%list='$(%DIR%_PYTHON)'; dlist=''; for p in $$list; do\
+if %?BASE%
+ @list='$(%DIR%_PYTHON)'; dlist=''; list2=''; for p in $$list; do\
## A file can be in the source directory or the build directory.
if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
if test -f $$b$$p; then \
## Compute basename of source file. Unless this is a nobase_ target, we
## want to install 'python/foo.py' as '$(DESTDIR)$(%NDIR%dir)/foo.py',
## not '$(DESTDIR)$(%NDIR%dir)/python/foo.py'.
- %BASE?$(am__strip_dir):$(am__vpath_adj)% \
+ $(am__strip_dir) \
dlist="$$dlist $$f"; \
-## Don't perform translation, since script name is important.
- echo " $(%DIR%PYTHON_INSTALL) '$$b$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
- $(%DIR%PYTHON_INSTALL) "$$b$$p" "$(DESTDIR)$(%NDIR%dir)/$$f"; \
+ list2="$$list2 $$b$$p"; \
else :; fi; \
done; \
+ test -z "$$list2" || { \
+## Don't perform translation, since script name is important.
+ echo " $(%DIR%PYTHON_INSTALL) $$list2 '$(DESTDIR)$(%NDIR%dir)'"; \
+ $(%DIR%PYTHON_INSTALL) $$list2 "$(DESTDIR)$(%NDIR%dir)"; }; \
## Byte-compile must be done at install time, since file times are
## encoded in the actual files.
if test -n "$$dlist"; then \
PYTHON=$(PYTHON) $(py_compile) --destdir "$(DESTDIR)" --basedir "$(%NDIR%dir)" $$dlist; \
fi; \
else :; fi
+else !%?BASE%
+ @list='$(%DIR%_PYTHON)'; $(am__nobase_list) | \
+ while read dir files; do \
+ xfiles=; for p in $$files; do \
+## A file can be in the source directory or the build directory.
+ if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
+ if test -f "$$b$$p"; then xfiles="$$xfiles $$b$$p"; dlist="$$dlist $$p"; \
+ else :; fi; done; \
+ test -z "$$xfiles" || { \
+ test "x$$dir" = x. || { \
+ echo "$(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \
+ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)/$$dir"; }; \
+## Don't perform translation, since script name is important.
+ echo " $(%DIR%PYTHON_INSTALL) $$xfiles '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \
+ $(%DIR%PYTHON_INSTALL) $$xfiles "$(DESTDIR)$(%NDIR%dir)/$$dir"; }; \
+## Byte-compile must be done at install time, since file times are
+## encoded in the actual files.
+ if test -n "$$dlist"; then \
+ if test -z "$(DESTDIR)"; then \
+ PYTHON=$(PYTHON) $(py_compile) --basedir "$(%NDIR%dir)" $$dlist; \
+ else \
+ PYTHON=$(PYTHON) $(py_compile) --destdir "$(DESTDIR)" --basedir "$(%NDIR%dir)" $$dlist; \
+ fi; \
+ else :; fi \
+ done
+endif !%?BASE%
endif %?INSTALL%
## automake - create Makefile.in from Makefile.am
## Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-## 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+## 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
- @list='$(DVIS)'; for p in $$list; do \
+ @list='$(DVIS)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(dvidir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(dvidir)'"; \
+ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(dvidir)"; }
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; for p in $$list; do \
+ @list='$(HTMLS)'; list2=; for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
else \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
+ list2="$$list2 $$d$$p"; \
fi; \
- done
+ done; \
+ test -z "$$list2" || { \
+ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(htmldir)"; }
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
+ list='$(INFO_DEPS)'; list2=; \
for file in $$list; do \
## Strip possible $(srcdir) prefix.
case $$file in \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
-## Strip directory
- relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
- echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
- $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
+ list2="$$list2 $$ifile"; \
else : ; fi; \
done; \
- done
+ done; \
+ test -z "$$list2" || { \
+ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(infodir)'"; \
+ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(infodir)"; }
@$(POST_INSTALL)
## Only run this code if install-info actually exists, and it is not
## the Debian install-info. FIXME: once Debian install-info goes
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; for p in $$list; do \
+ @list='$(PDFS)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(pdfdir)"; }
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
- @list='$(PSS)'; for p in $$list; do \
+ @list='$(PSS)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(psdir)/$$f'"; \
- $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(psdir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(psdir)'"; \
+ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(psdir)"; }
else ! %?LOCAL-TEXIS%
install-dvi-am:
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__nobase_list = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == 50) { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir " " files[dir] }'
am__installdirs = "$(DESTDIR)$(m4datadir)"
dist_m4dataDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_m4data_DATA)
install-dist_m4dataDATA: $(dist_m4data_DATA)
@$(NORMAL_INSTALL)
test -z "$(m4datadir)" || $(MKDIR_P) "$(DESTDIR)$(m4datadir)"
- @list='$(dist_m4data_DATA)'; for p in $$list; do \
+ @list='$(dist_m4data_DATA)'; list2=; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- echo " $(dist_m4dataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(m4datadir)/$$f'"; \
- $(dist_m4dataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(m4datadir)/$$f"; \
- done
+ list2="$$list2 $$d$$p"; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(dist_m4dataDATA_INSTALL) $$list2 '$(DESTDIR)$(m4datadir)'"; \
+ $(dist_m4dataDATA_INSTALL) $$list2 "$(DESTDIR)$(m4datadir)"; }
uninstall-dist_m4dataDATA:
@$(NORMAL_UNINSTALL)
projects / platform / upstream / automake.git / commitdiff