drm/i915/crt: convert to encoder disable/enable

CRT is the first output which can be cloned, hence we cannot (yet)
move the dpms handling over to disable/enable. This requires some more
smarts in intel_crtc_dpms first to set the display pipe status
depening upon encoder->connectors_active of all connected encoders.

Because that will happen in a separate step, don't touch the dpms
functions, yet.

v2: Be careful about clearing the _DISABLE flags for intermediate dpms
modes - otherwise we might clobber the crt state when another (cloned)
connector gets enabled.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 1d05b2d..543ea40 100644 (file)
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -61,6 +61,29 @@ static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
        return container_of(encoder, struct intel_crt, base);
 }
 
+static void intel_disable_crt(struct intel_encoder *encoder)
+{
+       struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+       struct intel_crt *crt = intel_encoder_to_crt(encoder);
+       u32 temp;
+
+       temp = I915_READ(crt->adpa_reg);
+       temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
+       temp &= ~ADPA_DAC_ENABLE;
+       I915_WRITE(crt->adpa_reg, temp);
+}
+
+static void intel_enable_crt(struct intel_encoder *encoder)
+{
+       struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+       struct intel_crt *crt = intel_encoder_to_crt(encoder);
+       u32 temp;
+
+       temp = I915_READ(crt->adpa_reg);
+       temp |= ADPA_DAC_ENABLE;
+       I915_WRITE(crt->adpa_reg, temp);
+}
+
 static void pch_crt_dpms(struct drm_encoder *encoder, int mode)
 {
        struct drm_device *dev = encoder->dev;
@@ -575,18 +598,20 @@ static void intel_crt_reset(struct drm_connector *connector)
 
 static const struct drm_encoder_helper_funcs pch_encoder_funcs = {
        .mode_fixup = intel_crt_mode_fixup,
-       .prepare = intel_encoder_prepare,
-       .commit = intel_encoder_commit,
+       .prepare = intel_encoder_noop,
+       .commit = intel_encoder_noop,
        .mode_set = intel_crt_mode_set,
        .dpms = pch_crt_dpms,
+       .disable = intel_encoder_disable,
 };
 
 static const struct drm_encoder_helper_funcs gmch_encoder_funcs = {
        .mode_fixup = intel_crt_mode_fixup,
-       .prepare = intel_encoder_prepare,
-       .commit = intel_encoder_commit,
+       .prepare = intel_encoder_noop,
+       .commit = intel_encoder_noop,
        .mode_set = intel_crt_mode_set,
        .dpms = gmch_crt_dpms,
+       .disable = intel_encoder_disable,
 };
 
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
@@ -682,6 +707,9 @@ void intel_crt_init(struct drm_device *dev)
        else
                crt->adpa_reg = ADPA;
 
+       crt->base.disable = intel_disable_crt;
+       crt->base.enable = intel_enable_crt;
+
        drm_encoder_helper_add(&crt->base.base, encoder_helper_funcs);
        drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);