return err ? -EOPNOTSUPP : 0;
}
-static int rocker_port_change_proto_down(struct net_device *dev,
- bool proto_down)
-{
- struct rocker_port *rocker_port = netdev_priv(dev);
-
- if (rocker_port->dev->flags & IFF_UP)
- rocker_port_set_enable(rocker_port, !proto_down);
- rocker_port->dev->proto_down = proto_down;
- return 0;
-}
-
static void rocker_port_neigh_destroy(struct net_device *dev,
struct neighbour *n)
{
.ndo_set_mac_address = rocker_port_set_mac_address,
.ndo_change_mtu = rocker_port_change_mtu,
.ndo_get_phys_port_name = rocker_port_get_phys_port_name,
- .ndo_change_proto_down = rocker_port_change_proto_down,
.ndo_neigh_destroy = rocker_port_neigh_destroy,
.ndo_get_port_parent_id = rocker_port_get_port_parent_id,
};
#endif
.ndo_get_iflink = macvlan_dev_get_iflink,
.ndo_features_check = passthru_features_check,
- .ndo_change_proto_down = dev_change_proto_down_generic,
};
void macvlan_common_setup(struct net_device *dev)
dev->max_mtu = ETH_MAX_MTU;
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
netif_keep_dst(dev);
- dev->priv_flags |= IFF_UNICAST_FLT;
+ dev->priv_flags |= IFF_UNICAST_FLT | IFF_CHANGE_PROTO_DOWN;
dev->netdev_ops = &macvlan_netdev_ops;
dev->needs_free_netdev = true;
dev->header_ops = &macvlan_hard_header_ops;
.ndo_fdb_dump = vxlan_fdb_dump,
.ndo_fdb_get = vxlan_fdb_get,
.ndo_fill_metadata_dst = vxlan_fill_metadata_dst,
- .ndo_change_proto_down = dev_change_proto_down_generic,
};
static const struct net_device_ops vxlan_netdev_raw_ops = {
dev->hw_features |= NETIF_F_RXCSUM;
dev->hw_features |= NETIF_F_GSO_SOFTWARE;
netif_keep_dst(dev);
- dev->priv_flags |= IFF_NO_QUEUE;
+ dev->priv_flags |= IFF_NO_QUEUE | IFF_CHANGE_PROTO_DOWN;
/* MTU range: 68 - 65535 */
dev->min_mtu = ETH_MIN_MTU;
* TX queue.
* int (*ndo_get_iflink)(const struct net_device *dev);
* Called to get the iflink value of this device.
- * void (*ndo_change_proto_down)(struct net_device *dev,
- * bool proto_down);
- * This function is used to pass protocol port error state information
- * to the switch driver. The switch driver can react to the proto_down
- * by doing a phys down on the associated switch port.
* int (*ndo_fill_metadata_dst)(struct net_device *dev, struct sk_buff *skb);
* This function is used to get egress tunnel information for given skb.
* This is useful for retrieving outer tunnel header parameters while
int queue_index,
u32 maxrate);
int (*ndo_get_iflink)(const struct net_device *dev);
- int (*ndo_change_proto_down)(struct net_device *dev,
- bool proto_down);
int (*ndo_fill_metadata_dst)(struct net_device *dev,
struct sk_buff *skb);
void (*ndo_set_rx_headroom)(struct net_device *dev,
* @IFF_LIVE_RENAME_OK: rename is allowed while device is up and running
* @IFF_TX_SKB_NO_LINEAR: device/driver is capable of xmitting frames with
* skb_headlen(skb) == 0 (data starts from frag0)
+ * @IFF_CHANGE_PROTO_DOWN: device supports setting carrier via IFLA_PROTO_DOWN
*/
enum netdev_priv_flags {
IFF_802_1Q_VLAN = 1<<0,
IFF_L3MDEV_RX_HANDLER = 1<<29,
IFF_LIVE_RENAME_OK = 1<<30,
IFF_TX_SKB_NO_LINEAR = 1<<31,
+ IFF_CHANGE_PROTO_DOWN = BIT_ULL(32),
};
#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
/* Read-mostly cache-line for fast-path access */
unsigned int flags;
- unsigned int priv_flags;
+ unsigned long long priv_flags;
const struct net_device_ops *netdev_ops;
int ifindex;
unsigned short gflags;
struct netdev_phys_item_id *ppid, bool recurse);
bool netdev_port_same_parent_id(struct net_device *a, struct net_device *b);
int dev_change_proto_down(struct net_device *dev, bool proto_down);
-int dev_change_proto_down_generic(struct net_device *dev, bool proto_down);
void dev_change_proto_down_reason(struct net_device *dev, unsigned long mask,
u32 value);
struct sk_buff *validate_xmit_skb_list(struct sk_buff *skb, struct net_device *dev, bool *again);
stats = dev_get_stats(vlandev, &temp);
seq_printf(seq,
- "%s VID: %d REORDER_HDR: %i dev->priv_flags: %hx\n",
+ "%s VID: %d REORDER_HDR: %i dev->priv_flags: %llx\n",
vlandev->name, vlan->vlan_id,
(int)(vlan->flags & 1), vlandev->priv_flags);
EXPORT_SYMBOL(netdev_port_same_parent_id);
/**
- * dev_change_proto_down - update protocol port state information
+ * dev_change_proto_down - set carrier according to proto_down.
+ *
* @dev: device
* @proto_down: new value
- *
- * This info can be used by switch drivers to set the phys state of the
- * port.
*/
int dev_change_proto_down(struct net_device *dev, bool proto_down)
{
- const struct net_device_ops *ops = dev->netdev_ops;
-
- if (!ops->ndo_change_proto_down)
+ if (!(dev->priv_flags & IFF_CHANGE_PROTO_DOWN))
return -EOPNOTSUPP;
if (!netif_device_present(dev))
return -ENODEV;
- return ops->ndo_change_proto_down(dev, proto_down);
-}
-EXPORT_SYMBOL(dev_change_proto_down);
-
-/**
- * dev_change_proto_down_generic - generic implementation for
- * ndo_change_proto_down that sets carrier according to
- * proto_down.
- *
- * @dev: device
- * @proto_down: new value
- */
-int dev_change_proto_down_generic(struct net_device *dev, bool proto_down)
-{
if (proto_down)
netif_carrier_off(dev);
else
dev->proto_down = proto_down;
return 0;
}
-EXPORT_SYMBOL(dev_change_proto_down_generic);
+EXPORT_SYMBOL(dev_change_proto_down);
/**
* dev_change_proto_down_reason - proto down reason
struct device_attribute *attr,
const char *buf, size_t len)
{
- struct net_device *netdev = to_net_dev(dev);
-
- /* The check is also done in change_proto_down; this helps returning
- * early without hitting the trylock/restart in netdev_store.
- */
- if (!netdev->netdev_ops->ndo_change_proto_down)
- return -EOPNOTSUPP;
-
return netdev_store(dev, attr, buf, len, change_proto_down);
}
NETDEVICE_SHOW_RW(proto_down, fmt_dec);
struct netlink_ext_ack *extack)
{
struct nlattr *pdreason[IFLA_PROTO_DOWN_REASON_MAX + 1];
- const struct net_device_ops *ops = dev->netdev_ops;
unsigned long mask = 0;
u32 value;
bool proto_down;
int err;
- if (!ops->ndo_change_proto_down) {
+ if (!(dev->priv_flags & IFF_CHANGE_PROTO_DOWN)) {
NL_SET_ERR_MSG(extack, "Protodown not supported by device");
return -EOPNOTSUPP;
}