V4L/DVB (12740): em28xx: better describe vinctrl registers

Properly document the video input control register, in preparation for the
addition of VBI support.  Note this patch makes no functional changes.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 7e3c782..cc80723 100644 (file)
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -2570,7 +2570,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
         * Default format, used for tvp5150 or saa711x output formats
         */
        dev->vinmode = 0x10;
-       dev->vinctl  = 0x11;
+       dev->vinctl  = EM28XX_VINCTRL_INTERLACED |
+                      EM28XX_VINCTRL_CCIR656_ENABLE;
 
        /* Do board specific init and eeprom reading */
        em28xx_card_setup(dev);

diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index 6bf84bd..3bf69f9 100644 (file)
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -86,7 +86,19 @@
 #define EM28XX_XCLK_FREQUENCY_24MHZ    0x0b
 
 #define EM28XX_R10_VINMODE     0x10
+
 #define EM28XX_R11_VINCTRL     0x11
+
+/* em28xx Video Input Control Register 0x11 */
+#define EM28XX_VINCTRL_VBI_SLICED      0x80
+#define EM28XX_VINCTRL_VBI_RAW         0x40
+#define EM28XX_VINCTRL_VOUT_MODE_IN    0x20 /* HREF,VREF,VACT in output */
+#define EM28XX_VINCTRL_CCIR656_ENABLE  0x10
+#define EM28XX_VINCTRL_VBI_16BIT_RAW   0x08 /* otherwise 8-bit raw */
+#define EM28XX_VINCTRL_FID_ON_HREF     0x04
+#define EM28XX_VINCTRL_DUAL_EDGE_STROBE        0x02
+#define EM28XX_VINCTRL_INTERLACED      0x01
+
 #define EM28XX_R12_VINENABLE   0x12    /* */
 
 #define EM28XX_R14_GAMMA       0x14