* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.13
+ * mpi2_cnfg.h Version: 02.00.14
*
* Version History
* ---------------
* Added Ethernet configuration pages.
* 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
* Added SAS PHY Page 4 structure and defines.
+ * 02-10-10 02.00.14 Modified the comments for the configuration page
+ * structures that contain an array of data. The host
+ * should use the "count" field in the page data (e.g. the
+ * NumPhys field) to determine the number of valid elements
+ * in the array.
+ * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
+ * Added PowerManagementCapabilities to IO Unit Page 7.
+ * Added PortWidthModGroup field to
+ * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
* --------------------------------------------------------------------------
*/
#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083)
#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084)
#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085)
-#define MPI2_MFGPAGE_DEVID_SAS2208_7 (0x0086)
-#define MPI2_MFGPAGE_DEVID_SAS2208_8 (0x0087)
+#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086)
+#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087)
+#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E)
/* Manufacturing Page 0 */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
+ * one and check the value returned for GPIOCount at runtime.
*/
#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1)
/*
* Upper layer code (drivers, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumDmaEngines at runtime.
+ * one and check the value returned for NumDmaEngines at runtime.
*/
#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
U8 PCIeWidth; /* 0x06 */
U8 PCIeSpeed; /* 0x07 */
U32 ProcessorState; /* 0x08 */
- U32 Reserved2; /* 0x0C */
+ U32 PowerManagementCapabilities; /* 0x0C */
U16 IOCTemperature; /* 0x10 */
U8 IOCTemperatureUnits; /* 0x12 */
U8 IOCSpeed; /* 0x13 */
} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t;
-#define MPI2_IOUNITPAGE7_PAGEVERSION (0x00)
+#define MPI2_IOUNITPAGE7_PAGEVERSION (0x01)
/* defines for IO Unit Page 7 PCIeWidth field */
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
+/* defines for IO Unit Page 7 PowerManagementCapabilities field */
+#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400)
+#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200)
+#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100)
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008)
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004)
+
+
/* defines for IO Unit Page 7 IOCTemperatureUnits field */
#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
+ * one and check the value returned for NumPhysDisks at runtime.
*/
#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumPhysDiskPaths at runtime.
+ * one and check the value returned for NumPhysDiskPaths at runtime.
*/
#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT0_PHY_MAX
#define MPI2_SAS_IOUNIT0_PHY_MAX (1)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT1_PHY_MAX
#define MPI2_SAS_IOUNIT1_PHY_MAX (1)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * four and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT4_PHY_MAX
#define MPI2_SAS_IOUNIT4_PHY_MAX (4)
typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
U8 ControlFlags; /* 0x00 */
- U8 Reserved1; /* 0x01 */
+ U8 PortWidthModGroup; /* 0x01 */
U16 InactivityTimerExponent; /* 0x02 */
U8 SATAPartialTimeout; /* 0x04 */
U8 Reserved2; /* 0x05 */
#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02)
#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01)
+/* defines for PortWidthModeGroup field */
+#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF)
+
/* defines for InactivityTimerExponent field */
#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000)
#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
#define MPI2_SAS_IOUNIT5_PHY_MAX (1)
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t;
-#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x00)
+#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01)
+
+
+/* SAS IO Unit Page 6 */
+
+typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
+ U8 CurrentStatus; /* 0x00 */
+ U8 CurrentModulation; /* 0x01 */
+ U8 CurrentUtilization; /* 0x02 */
+ U8 Reserved1; /* 0x03 */
+ U32 Reserved2; /* 0x04 */
+} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+ MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+ Mpi2SasIOUnit6PortWidthModGroupStatus_t,
+ MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t;
+
+/* defines for CurrentStatus field */
+#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00)
+#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01)
+#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02)
+#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03)
+#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04)
+#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07)
+
+/* defines for CurrentModulation field */
+#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00)
+#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01)
+#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02)
+#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
+#define MPI2_SAS_IOUNIT6_GROUP_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U32 Reserved2; /* 0x0C */
+ U8 NumGroups; /* 0x10 */
+ U8 Reserved3; /* 0x11 */
+ U16 Reserved4; /* 0x12 */
+ MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
+ PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_6,
+ MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
+ Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t;
+
+#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00)
+
+
+/* SAS IO Unit Page 7 */
+
+typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
+ U8 Flags; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+ U8 Threshold75Pct; /* 0x04 */
+ U8 Threshold50Pct; /* 0x05 */
+ U8 Threshold25Pct; /* 0x06 */
+ U8 Reserved3; /* 0x07 */
+} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+ MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+ Mpi2SasIOUnit7PortWidthModGroupSettings_t,
+ MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t;
+
+/* defines for Flags field */
+#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01)
+
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
+#define MPI2_SAS_IOUNIT7_GROUP_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U8 SamplingInterval; /* 0x08 */
+ U8 WindowLength; /* 0x09 */
+ U16 Reserved1; /* 0x0A */
+ U32 Reserved2; /* 0x0C */
+ U32 Reserved3; /* 0x10 */
+ U8 NumGroups; /* 0x14 */
+ U8 Reserved4; /* 0x15 */
+ U16 Reserved5; /* 0x16 */
+ MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
+ PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_7,
+ MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
+ Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t;
+
+#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00)
+
+
+/* SAS IO Unit Page 8 */
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U32 PowerManagementCapabilities;/* 0x0C */
+ U32 Reserved2; /* 0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_8,
+ MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
+ Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t;
+
+#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00)
+
+/* defines for PowerManagementCapabilities field */
+#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x000001000)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x000000800)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x000000400)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x000000200)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x000000100)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x000000010)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x000000008)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x000000004)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x000000002)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x000000001)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ * one and check the value returned for NumPhyEvents at runtime.
*/
#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
#define MPI2_SASPHY2_PHY_EVENT_MAX (1)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ * one and check the value returned for NumPhyEvents at runtime.
*/
#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
#define MPI2_SASPHY3_PHY_EVENT_MAX (1)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumLogEntries at runtime.
*/
#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
#define MPI2_LOG_0_NUM_LOG_ENTRIES (1)
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumElements at runtime.
*/
#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1)
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.13
+ * mpi2_ioc.h Version: 02.00.14
*
* Version History
* ---------------
* (MPI2_FW_HEADER_PID_).
* Modified values for SAS ProductID Family
* (MPI2_FW_HEADER_PID_FAMILY_).
+ * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines.
+ * Added PowerManagementControl Request structures and
+ * defines.
* --------------------------------------------------------------------------
*/
#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022)
#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024)
+#define MPI2_EVENT_SAS_QUIESCE (0x0025)
/* Log Entry Added Event data */
* */
+/* SAS Quiesce Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
+ U8 ReasonCode; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+ U32 Reserved3; /* 0x04 */
+} MPI2_EVENT_DATA_SAS_QUIESCE,
+ MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
+ Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t;
+
+/* SAS Quiesce Event data ReasonCode values */
+#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01)
+#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02)
+
+
/* Host Based Discovery Phy Event data */
typedef struct _MPI2_EVENT_HBD_PHY_SAS {
#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07)
#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08)
#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09)
+#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A)
#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
/* FWDownload TransactionContext Element */
#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
#define MPI2_FW_HEADER_PID_PROD_A (0x0000)
-#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200)
#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700)
#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14)
+/****************************************************************************
+* PowerManagementControl message
+****************************************************************************/
+
+/* PowerManagementControl Request message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
+ U8 Feature; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U8 ChainOffset; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 Reserved2; /* 0x04 */
+ U8 Reserved3; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved4; /* 0x0A */
+ U8 Parameter1; /* 0x0C */
+ U8 Parameter2; /* 0x0D */
+ U8 Parameter3; /* 0x0E */
+ U8 Parameter4; /* 0x0F */
+ U32 Reserved5; /* 0x10 */
+ U32 Reserved6; /* 0x14 */
+} MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
+ Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t;
+
+/* defines for the Feature field */
+#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01)
+#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02)
+#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03)
+#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04)
+#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80)
+#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF)
+
+/* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
+/* Parameter1 contains a PHY number */
+/* Parameter2 indicates power condition action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01)
+#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02)
+#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03)
+/* Parameter3 and Parameter4 are reserved */
+
+/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
+ * Feature */
+/* Parameter1 contains SAS port width modulation group number */
+/* Parameter2 indicates IOC action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01)
+#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02)
+#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03)
+/* Parameter3 indicates desired modulation level using these defines */
+#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00)
+#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01)
+#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02)
+#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03)
+/* Parameter4 is reserved */
+
+/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
+/* Parameter1 indicates desired PCIe link speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00)
+#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01)
+#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02)
+/* Parameter2 indicates desired PCIe link width using these defines */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01)
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02)
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04)
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08)
+/* Parameter3 and Parameter4 are reserved */
+
+/* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
+/* Parameter1 indicates desired IOC hardware clock speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01)
+#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02)
+#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04)
+#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08)
+/* Parameter2, Parameter3, and Parameter4 are reserved */
+
+
+/* PowerManagementControl Reply message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
+ U8 Feature; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U8 MsgLength; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 Reserved2; /* 0x04 */
+ U8 Reserved3; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved4; /* 0x0A */
+ U16 Reserved5; /* 0x0C */
+ U16 IOCStatus; /* 0x0E */
+ U32 IOCLogInfo; /* 0x10 */
+} MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
+ Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t;
+
+
#endif
projects / platform / kernel / linux-rpi.git / commitdiff