ARM: dts: mxs: Add the LCD to the 10049 board

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index dd91244..cabc33a 100644 (file)
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -30,9 +30,11 @@
                                        reg = <0>;
                                        fsl,pinmux-ids = <
                                                0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+                                               0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */
                                                0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
                                                0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
                                                0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+                                               0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */
                                        >;
                                        fsl,drive-strength = <0>;
                                        fsl,voltage = <1>;
@@ -43,12 +45,25 @@
                                        reg = <0>;
                                        fsl,pinmux-ids = <
                                                0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+                                               0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
                                        >;
                                        fsl,drive-strength = <0>;
                                        fsl,voltage = <1>;
                                        fsl,pull-up = <1>;
                                };
 
+                               spi2_pins_cfa10049: spi2-cfa10049@0 {
+                                       reg = <0>;
+                                       fsl,pinmux-ids = <
+                                               0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
+                                               0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
+                                               0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+                                       >;
+                                       fsl,drive-strength = <1>;
+                                       fsl,voltage = <1>;
+                                       fsl,pull-up = <1>;
+                               };
+
                                spi3_pins_cfa10049: spi3-cfa10049@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
@@ -62,10 +77,63 @@
                                        fsl,voltage = <1>;
                                        fsl,pull-up = <1>;
                                };
+
+                               lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
+                                       reg = <0>;
+                                       fsl,pinmux-ids = <
+                                               0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+                                               0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+                                               0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+                                               0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+                                               0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+                                               0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+                                               0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+                                               0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+                                               0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+                                               0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+                                               0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+                                               0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+                                               0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+                                               0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+                                               0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+                                               0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+                                               0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+                                               0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+                                       >;
+                                       fsl,drive-strength = <0>;
+                                       fsl,voltage = <1>;
+                                       fsl,pull-up = <0>;
+                               };
+
+                               lcdif_pins_cfa10049: lcdif-evk@0 {
+                                       reg = <0>;
+                                       fsl,pinmux-ids = <
+                                               0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+                                               0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+                                               0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+                                               0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+                                       >;
+                                       fsl,drive-strength = <0>;
+                                       fsl,voltage = <1>;
+                                       fsl,pull-up = <0>;
+                               };
+                       };
+
+                       lcdif@80030000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&lcdif_18bit_pins_cfa10049
+                                            &lcdif_pins_cfa10049>;
+                               status = "okay";
                        };
                };
 
                apbx@80040000 {
+                       pwm: pwm@80064000 {
+                               pinctrl-names = "default", "default";
+                               pinctrl-1 = <&pwm3_pins_b>;
+                               status = "okay";
+                       };
+
                        i2c1: i2c@8005a000 {
                                pinctrl-names = "default";
                                pinctrl-0 = <&i2c1_pins_a>;
@@ -147,6 +215,30 @@
                };
        };
 
+       spi2 {
+               compatible = "spi-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&spi2_pins_cfa10049>;
+               status = "okay";
+               gpio-sck = <&gpio2 16 0>;
+               gpio-mosi = <&gpio2 17 0>;
+               gpio-miso = <&gpio2 18 0>;
+               cs-gpios = <&gpio3 23 0>;
+               num-chipselects = <1>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               hx8357: hx8357@0 {
+                       compatible = "himax,hx8357b", "himax,hx8357";
+                       reg = <0>;
+                       spi-max-frequency = <100000>;
+                       spi-cpol;
+                       spi-cpha;
+                       gpios-reset = <&gpio3 30 0>;
+                       im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
+               };
+       };
+
        spi3 {
                compatible = "spi-gpio";
                pinctrl-names = "default";
@@ -183,4 +275,11 @@
                        spi-max-frequency = <100000>;
                };
        };
+
+       backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm 3 5000000>;
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <6>;
+       };
 };

diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 19c5aeb..7147dfc 100644 (file)
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -119,6 +119,23 @@ static struct fb_videomode apf28dev_video_modes[] = {
        },
 };
 
+static struct fb_videomode cfa10049_video_modes[] = {
+       {
+               .name           = "Himax HX8357-B",
+               .refresh        = 60,
+               .xres           = 320,
+               .yres           = 480,
+               .pixclock       = 108506, /* picosecond (9.216 MHz) */
+               .left_margin    = 2,
+               .right_margin   = 2,
+               .upper_margin   = 2,
+               .lower_margin   = 2,
+               .hsync_len      = 15,
+               .vsync_len      = 15,
+               .sync           = FB_SYNC_DATA_ENABLE_HIGH_ACT
+       },
+};
+
 static struct mxsfb_platform_data mxsfb_pdata __initdata;
 
 /*
@@ -399,6 +416,11 @@ static void __init cfa10037_init(void)
 {
        enable_clk_enet_out();
        update_fec_mac_prop(OUI_CRYSTALFONTZ);
+
+       mxsfb_pdata.mode_list = cfa10049_video_modes;
+       mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
+       mxsfb_pdata.default_bpp = 32;
+       mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
 }
 
 static void __init apf28_init(void)