configs: ls2088ardb: enable DM_GPIO and CMD_GPIO

Enable DM_GPIO and CMD_GPIO for board ls2088ardb

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
index 4dbdc1f..7d7443e 100644 (file)
--- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
@@ -17,9 +17,11 @@ CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=10
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_DM_GPIO=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y

diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig
index f81e2ae..58757f2 100644 (file)
--- a/configs/ls2088ardb_qspi_defconfig
+++ b/configs/ls2088ardb_qspi_defconfig
@@ -20,9 +20,11 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_DM_GPIO=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y

diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
index ccf79c1..bd7b4df 100644 (file)
--- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y

diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig
index 4277f9c..2c60c85 100644 (file)
--- a/configs/ls2088ardb_tfa_defconfig
+++ b/configs/ls2088ardb_tfa_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y