arm: dts: dm8x: Non-functional changes sync with v6.3-rc6

This is a collection of all the whitespace, renames, comment, and other
changes that should not change the DT functionality from Linux v6.3-rc6.

Signed-off-by: Andrew Davis <afd@ti.com>

diff --git a/arch/arm/dts/da850-evm.dts b/arch/arm/dts/da850-evm.dts
index 7e865bb..378af9f 100644 (file)
--- a/arch/arm/dts/da850-evm.dts
+++ b/arch/arm/dts/da850-evm.dts
@@ -52,15 +52,15 @@
                enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
 
                panel-info {
-                       ac-bias         = <255>;
-                       ac-bias-intrpt  = <0>;
-                       dma-burst-sz    = <16>;
-                       bpp             = <16>;
-                       fdd             = <0x80>;
-                       sync-edge       = <0>;
-                       sync-ctrl       = <1>;
-                       raster-order    = <0>;
-                       fifo-th         = <0>;
+                       ac-bias = <255>;
+                       ac-bias-intrpt = <0>;
+                       dma-burst-sz = <16>;
+                       bpp = <16>;
+                       fdd = <0x80>;
+                       sync-edge = <0>;
+                       sync-ctrl = <1>;
+                       raster-order = <0>;
+                       fifo-th = <0>;
                };
 
                display-timings {
@@ -265,7 +265,7 @@
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
-       flash: m25p80@0 {
+       flash: flash@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "m25p64";

diff --git a/arch/arm/dts/da850-lego-ev3.dts b/arch/arm/dts/da850-lego-ev3.dts
index 6d781d5..7207d12 100644 (file)
--- a/arch/arm/dts/da850-lego-ev3.dts
+++ b/arch/arm/dts/da850-lego-ev3.dts
@@ -22,7 +22,7 @@
                stdout-path = &serial1;
        };
 
-       memory {
+       memory@c0000000 {
                device_type = "memory";
                reg = <0xc0000000 0x04000000>;
        };

diff --git a/arch/arm/dts/da850.dtsi b/arch/arm/dts/da850.dtsi
index e6e78b8..c96f64b 100644 (file)
--- a/arch/arm/dts/da850.dtsi
+++ b/arch/arm/dts/da850.dtsi
@@ -369,7 +369,7 @@
                edma0: edma@0 {
                        compatible = "ti,edma3-tpcc";
                        /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
-                       reg =   <0x0 0x8000>;
+                       reg = <0x0 0x8000>;
                        reg-names = "edma3_cc";
                        interrupts = <11 12>;
                        interrupt-names = "edma3_ccint", "edma3_ccerrint";
@@ -380,14 +380,14 @@
                };
                edma0_tptc0: tptc@8000 {
                        compatible = "ti,edma3-tptc";
-                       reg =   <0x8000 0x400>;
+                       reg = <0x8000 0x400>;
                        interrupts = <13>;
                        interrupt-names = "edm3_tcerrint";
                        power-domains = <&psc0 1>;
                };
                edma0_tptc1: tptc@8400 {
                        compatible = "ti,edma3-tptc";
-                       reg =   <0x8400 0x400>;
+                       reg = <0x8400 0x400>;
                        interrupts = <32>;
                        interrupt-names = "edm3_tcerrint";
                        power-domains = <&psc0 2>;
@@ -395,7 +395,7 @@
                edma1: edma@230000 {
                        compatible = "ti,edma3-tpcc";
                        /* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
-                       reg =   <0x230000 0x8000>;
+                       reg = <0x230000 0x8000>;
                        reg-names = "edma3_cc";
                        interrupts = <93 94>;
                        interrupt-names = "edma3_ccint", "edma3_ccerrint";
@@ -406,7 +406,7 @@
                };
                edma1_tptc0: tptc@238000 {
                        compatible = "ti,edma3-tptc";
-                       reg =   <0x238000 0x400>;
+                       reg = <0x238000 0x400>;
                        interrupts = <95>;
                        interrupt-names = "edm3_tcerrint";
                        power-domains = <&psc1 21>;
@@ -543,7 +543,7 @@
                        power-domains = <&psc1 17>;
                        status = "disabled";
                };
-               ecap0: ecap@306000 {
+               ecap0: pwm@306000 {
                        compatible = "ti,da850-ecap", "ti,am3352-ecap",
                                     "ti,am33xx-ecap";
                        #pwm-cells = <3>;
@@ -553,7 +553,7 @@
                        power-domains = <&psc1 20>;
                        status = "disabled";
                };
-               ecap1: ecap@307000 {
+               ecap1: pwm@307000 {
                        compatible = "ti,da850-ecap", "ti,am3352-ecap",
                                     "ti,am33xx-ecap";
                        #pwm-cells = <3>;
@@ -563,7 +563,7 @@
                        power-domains = <&psc1 20>;
                        status = "disabled";
                };
-               ecap2: ecap@308000 {
+               ecap2: pwm@308000 {
                        compatible = "ti,da850-ecap", "ti,am3352-ecap",
                                     "ti,am33xx-ecap";
                        #pwm-cells = <3>;
@@ -627,7 +627,7 @@
 
                        cppi41dma: dma-controller@201000 {
                                compatible = "ti,da830-cppi41";
-                               reg =  <0x201000 0x1000
+                               reg = <0x201000 0x1000
                                        0x202000 0x1000
                                        0x204000 0x4000>;
                                reg-names = "controller",

diff --git a/arch/arm/dts/dm8168-evm.dts b/arch/arm/dts/dm8168-evm.dts
index 2a457c9..70255ab 100644 (file)
--- a/arch/arm/dts/dm8168-evm.dts
+++ b/arch/arm/dts/dm8168-evm.dts
@@ -116,19 +116,19 @@
                        label = "X-Loader";
                        reg = <0 0x80000>;
                };
-               partition@0x80000 {
+               partition@80000 {
                        label = "U-Boot";
                        reg = <0x80000 0x1c0000>;
                };
-               partition@0x1c0000 {
+               partition@1c0000 {
                        label = "Environment";
                        reg = <0x240000 0x40000>;
                };
-               partition@0x280000 {
+               partition@280000 {
                        label = "Kernel";
                        reg = <0x280000 0x500000>;
                };
-               partition@0x780000 {
+               partition@780000 {
                        label = "Filesystem";
                        reg = <0x780000 0xf880000>;
                };
@@ -139,7 +139,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&mcspi1_pins>;
 
-       m25p80@0 {
+       flash@0 {
                compatible = "w25x32";
                spi-max-frequency = <48000000>;
                reg = <0>;

diff --git a/arch/arm/dts/dm816x.dtsi b/arch/arm/dts/dm816x.dtsi
index ae2d938..c4a8653 100644 (file)
--- a/arch/arm/dts/dm816x.dtsi
+++ b/arch/arm/dts/dm816x.dtsi
@@ -63,8 +63,11 @@
                ranges;
 
                prcm: prcm@48180000 {
-                       compatible = "ti,dm816-prcm";
+                       compatible = "ti,dm816-prcm", "simple-bus";
                        reg = <0x48180000 0x4000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x48180000 0x4000>;
 
                        prcm_clocks: clocks {
                                #address-cells = <1>;
@@ -86,6 +89,8 @@
                        dm816x_pinmux: pinmux@800 {
                                compatible = "pinctrl-single";
                                reg = <0x800 0x50a>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
                                #pinctrl-cells = <1>;
                                pinctrl-single,register-width = <16>;
                                pinctrl-single,function-mask = <0xf>;
@@ -121,6 +126,8 @@
                        };
 
                        scrm_clocks: clocks {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
                        };
 
                        scrm_clockdomains: clockdomains {
@@ -228,7 +235,7 @@
                        #mbox-cells = <1>;
                        ti,mbox-num-users = <4>;
                        ti,mbox-num-fifos = <12>;
-                       mbox_dsp: mbox_dsp {
+                       mbox_dsp: mbox-dsp {
                                ti,mbox-tx = <3 0 0>;
                                ti,mbox-rx = <0 0 0>;
                        };
@@ -364,7 +371,7 @@
                        ti,timer-pwm;
                };
 
-               uart1: uart@48020000 {
+               uart1: serial@48020000 {
                        compatible = "ti,am3352-uart", "ti,omap3-uart";
                        ti,hwmods = "uart1";
                        reg = <0x48020000 0x2000>;
@@ -374,7 +381,7 @@
                        dma-names = "tx", "rx";
                };
 
-               uart2: uart@48022000 {
+               uart2: serial@48022000 {
                        compatible = "ti,am3352-uart", "ti,omap3-uart";
                        ti,hwmods = "uart2";
                        reg = <0x48022000 0x2000>;
@@ -384,7 +391,7 @@
                        dma-names = "tx", "rx";
                };
 
-               uart3: uart@48024000 {
+               uart3: serial@48024000 {
                        compatible = "ti,am3352-uart", "ti,omap3-uart";
                        ti,hwmods = "uart3";
                        reg = <0x48024000 0x2000>;