README: Drop unused CONFIG_SYS_LS_MC_FW_... options

Drop a few that are not used in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>

diff --git a/README b/README
index 5ffe14b..c233c8c 100644 (file)
--- a/README
+++ b/README
@@ -4812,10 +4812,6 @@ within that device.
        Specifies that QE/FMAN firmware is located on the primary SD/MMC
        device.  CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device.
 
-- CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH
-       Specifies that QE/FMAN firmware is located on the primary SPI
-       device.  CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device.
-
 - CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
        Specifies that QE/FMAN firmware is located in the remote (master)
        memory space.   CONFIG_SYS_FMAN_FW_ADDR is a virtual address which
@@ -4834,22 +4830,6 @@ within that device.
 - CONFIG_FSL_MC_ENET
        Enable the MC driver for Layerscape SoCs.
 
-- CONFIG_SYS_LS_MC_FW_ADDR
-       The address in the storage device where the firmware is located.  The
-       meaning of this address depends on which CONFIG_SYS_LS_MC_FW_IN_xxx macro
-       is also specified.
-
-- CONFIG_SYS_LS_MC_FW_LENGTH
-       The maximum possible size of the firmware.  The firmware binary format
-       has a field that specifies the actual size of the firmware, but it
-       might not be possible to read any part of the firmware unless some
-       local storage is allocated to hold the entire firmware first.
-
-- CONFIG_SYS_LS_MC_FW_IN_NOR
-       Specifies that MC firmware is located in NOR flash, mapped as
-       normal addressable memory via the LBC. CONFIG_SYS_LS_MC_FW_ADDR is the
-       virtual address in NOR flash.
-
 Freescale Layerscape Debug Server Support:
 -------------------------------------------
 The Freescale Layerscape Debug Server Support supports the loading of

diff --git a/include/configs/ls2080a_simu.h b/include/configs/ls2080a_simu.h
index 1851d41..f0ec6c4 100644 (file)
--- a/include/configs/ls2080a_simu.h
+++ b/include/configs/ls2080a_simu.h
@@ -146,9 +146,6 @@
 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR        0x580C00000ULL
 
 /* MC firmware */
-#define CONFIG_SYS_LS_MC_FW_IN_NOR
-#define CONFIG_SYS_LS_MC_FW_ADDR       0x580200000ULL
-
 #define CONFIG_SYS_LS_MC_DPL_IN_NOR
 #define CONFIG_SYS_LS_MC_DPL_ADDR      0x5806C0000ULL