wl12xx: add dynamic_ps_timeout debugfs file

Enable read/write of dynamic_ps_timeout which controls the timeout
of the dynamic PS implemented in the FW.
dynamic_ps_timeout is the timeout (in msec) until going back to PS
when there's no Rx/Tx

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
index 5e96e05..156a774 100644 (file)
--- a/drivers/net/wireless/wl12xx/debugfs.c
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -312,6 +312,72 @@ static const struct file_operations start_recovery_ops = {
        .llseek = default_llseek,
 };
 
+static ssize_t dynamic_ps_timeout_read(struct file *file, char __user *user_buf,
+                         size_t count, loff_t *ppos)
+{
+       struct wl1271 *wl = file->private_data;
+
+       return wl1271_format_buffer(user_buf, count,
+                                   ppos, "%d\n",
+                                   wl->conf.conn.dynamic_ps_timeout);
+}
+
+static ssize_t dynamic_ps_timeout_write(struct file *file,
+                                   const char __user *user_buf,
+                                   size_t count, loff_t *ppos)
+{
+       struct wl1271 *wl = file->private_data;
+       struct wl12xx_vif *wlvif;
+       unsigned long value;
+       int ret;
+
+       ret = kstrtoul_from_user(user_buf, count, 10, &value);
+       if (ret < 0) {
+               wl1271_warning("illegal value in dynamic_ps");
+               return -EINVAL;
+       }
+
+       if (value < 1 || value > 65535) {
+               wl1271_warning("dyanmic_ps_timeout is not in valid range");
+               return -ERANGE;
+       }
+
+       mutex_lock(&wl->mutex);
+
+       wl->conf.conn.dynamic_ps_timeout = value;
+
+       if (wl->state == WL1271_STATE_OFF)
+               goto out;
+
+       ret = wl1271_ps_elp_wakeup(wl);
+       if (ret < 0)
+               goto out;
+
+       /* In case we're already in PSM, trigger it again to set new timeout
+        * immediately without waiting for re-association
+        */
+
+       wl12xx_for_each_wlvif_sta(wl, wlvif) {
+               if (test_bit(WLVIF_FLAG_PSM, &wlvif->flags))
+                       wl1271_ps_set_mode(wl, wlvif, STATION_AUTO_PS_MODE,
+                                          wlvif->basic_rate, true);
+
+       }
+
+       wl1271_ps_elp_sleep(wl);
+
+out:
+       mutex_unlock(&wl->mutex);
+       return count;
+}
+
+static const struct file_operations dynamic_ps_timeout_ops = {
+       .read = dynamic_ps_timeout_read,
+       .write = dynamic_ps_timeout_write,
+       .open = wl1271_open_file_generic,
+       .llseek = default_llseek,
+};
+
 static ssize_t driver_state_read(struct file *file, char __user *user_buf,
                                 size_t count, loff_t *ppos)
 {
@@ -887,6 +953,7 @@ static int wl1271_debugfs_add_files(struct wl1271 *wl,
        DEBUGFS_ADD(dtim_interval, rootdir);
        DEBUGFS_ADD(beacon_interval, rootdir);
        DEBUGFS_ADD(beacon_filtering, rootdir);
+       DEBUGFS_ADD(dynamic_ps_timeout, rootdir);
 
        streaming = debugfs_create_dir("rx_streaming", rootdir);
        if (!streaming || IS_ERR(streaming))