/* Scan Commands, Responses, Notifications */
-/* Masks for iwl_scan_channel.type flags */
-#define SCAN_CHANNEL_TYPE_ACTIVE BIT(0)
-#define SCAN_CHANNEL_NARROW_BAND BIT(22)
-
/* Max number of IEs for direct SSID scans in a command */
#define PROBE_OPTION_MAX 20
/**
- * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table
- * @channel: band is selected by iwl_scan_cmd "flags" field
- * @tx_gain: gain for analog radio
- * @dsp_atten: gain for DSP
- * @active_dwell: dwell time for active scan in TU, typically 5-50
- * @passive_dwell: dwell time for passive scan in TU, typically 20-500
- * @type: type is broken down to these bits:
- * bit 0: 0 = passive, 1 = active
- * bits 1-20: SSID direct bit map. If any of these bits is set then
- * the corresponding SSID IE is transmitted in probe request
- * (bit i adds IE in position i to the probe request)
- * bit 22: channel width, 0 = regular, 1 = TGj narrow channel
- *
- * @iteration_count:
- * @iteration_interval:
- * This struct is used once for each channel in the scan list.
- * Each channel can independently select:
- * 1) SSID for directed active scans
- * 2) Txpower setting (for rate specified within Tx command)
- * 3) How long to stay on-channel (behavior may be modified by quiet_time,
- * quiet_plcp_th, good_CRC_th)
- *
- * To avoid uCode errors, make sure the following are true (see comments
- * under struct iwl_scan_cmd about max_out_time and quiet_time):
- * 1) If using passive_dwell (i.e. passive_dwell != 0):
- * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0)
- * 2) quiet_time <= active_dwell
- * 3) If restricting off-channel time (i.e. max_out_time !=0):
- * passive_dwell < max_out_time
- * active_dwell < max_out_time
- */
-struct iwl_scan_channel {
- __le32 type;
- __le16 channel;
- __le16 iteration_count;
- __le32 iteration_interval;
- __le16 active_dwell;
- __le16 passive_dwell;
-} __packed; /* SCAN_CHANNEL_CONTROL_API_S_VER_1 */
-
-/**
* struct iwl_ssid_ie - directed scan network information element
*
* Up to 20 of these may appear in REPLY_SCAN_CMD,
u8 ssid[IEEE80211_MAX_SSID_LEN];
} __packed; /* SCAN_DIRECT_SSID_IE_API_S_VER_1 */
-/**
- * iwl_scan_flags - masks for scan command flags
- *@SCAN_FLAGS_PERIODIC_SCAN:
- *@SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX:
- *@SCAN_FLAGS_DELAYED_SCAN_LOWBAND:
- *@SCAN_FLAGS_DELAYED_SCAN_HIGHBAND:
- *@SCAN_FLAGS_FRAGMENTED_SCAN:
- *@SCAN_FLAGS_PASSIVE2ACTIVE: use active scan on channels that was active
- * in the past hour, even if they are marked as passive.
- */
-enum iwl_scan_flags {
- SCAN_FLAGS_PERIODIC_SCAN = BIT(0),
- SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX = BIT(1),
- SCAN_FLAGS_DELAYED_SCAN_LOWBAND = BIT(2),
- SCAN_FLAGS_DELAYED_SCAN_HIGHBAND = BIT(3),
- SCAN_FLAGS_FRAGMENTED_SCAN = BIT(4),
- SCAN_FLAGS_PASSIVE2ACTIVE = BIT(5),
-};
-
-/**
- * enum iwl_scan_type - Scan types for scan command
- * @SCAN_TYPE_FORCED:
- * @SCAN_TYPE_BACKGROUND:
- * @SCAN_TYPE_OS:
- * @SCAN_TYPE_ROAMING:
- * @SCAN_TYPE_ACTION:
- * @SCAN_TYPE_DISCOVERY:
- * @SCAN_TYPE_DISCOVERY_FORCED:
- */
-enum iwl_scan_type {
- SCAN_TYPE_FORCED = 0,
- SCAN_TYPE_BACKGROUND = 1,
- SCAN_TYPE_OS = 2,
- SCAN_TYPE_ROAMING = 3,
- SCAN_TYPE_ACTION = 4,
- SCAN_TYPE_DISCOVERY = 5,
- SCAN_TYPE_DISCOVERY_FORCED = 6,
-}; /* SCAN_ACTIVITY_TYPE_E_VER_1 */
-
-/**
- * struct iwl_scan_cmd - scan request command
- * ( SCAN_REQUEST_CMD = 0x80 )
- * @len: command length in bytes
- * @scan_flags: scan flags from SCAN_FLAGS_*
- * @channel_count: num of channels in channel list
- * (1 - ucode_capa.n_scan_channels)
- * @quiet_time: in msecs, dwell this time for active scan on quiet channels
- * @quiet_plcp_th: quiet PLCP threshold (channel is quiet if less than
- * this number of packets were received (typically 1)
- * @passive2active: is auto switching from passive to active during scan allowed
- * @rxchain_sel_flags: RXON_RX_CHAIN_*
- * @max_out_time: in TUs, max out of serving channel time
- * @suspend_time: how long to pause scan when returning to service channel:
- * bits 0-19: beacon interal in TUs (suspend before executing)
- * bits 20-23: reserved
- * bits 24-31: number of beacons (suspend between channels)
- * @rxon_flags: RXON_FLG_*
- * @filter_flags: RXON_FILTER_*
- * @tx_cmd: for active scans (zero for passive), w/o payload,
- * no RS so specify TX rate
- * @direct_scan: direct scan SSIDs
- * @type: one of SCAN_TYPE_*
- * @repeats: how many time to repeat the scan
- */
-struct iwl_scan_cmd {
- __le16 len;
- u8 scan_flags;
- u8 channel_count;
- __le16 quiet_time;
- __le16 quiet_plcp_th;
- __le16 passive2active;
- __le16 rxchain_sel_flags;
- __le32 max_out_time;
- __le32 suspend_time;
- /* RX_ON_FLAGS_API_S_VER_1 */
- __le32 rxon_flags;
- __le32 filter_flags;
- struct iwl_tx_cmd tx_cmd;
- struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
- __le32 type;
- __le32 repeats;
-
- /*
- * Probe request frame, followed by channel list.
- *
- * Size of probe request frame is specified by byte count in tx_cmd.
- * Channel list follows immediately after probe request frame.
- * Number of channels in list is specified by channel_count.
- * Each channel in list is of type:
- *
- * struct iwl_scan_channel channels[0];
- *
- * NOTE: Only one band of channels can be scanned per pass. You
- * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
- * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION)
- * before requesting another scan.
- */
- u8 data[0];
-} __packed; /* SCAN_REQUEST_FIXED_PART_API_S_VER_5 */
-
-/* Response to scan request contains only status with one of these values */
-#define SCAN_RESPONSE_OK 0x1
-#define SCAN_RESPONSE_ERROR 0x2
-
-/*
- * SCAN_ABORT_CMD = 0x81
- * When scan abort is requested, the command has no fields except the common
- * header. The response contains only a status with one of these values.
- */
-#define SCAN_ABORT_POSSIBLE 0x1
-#define SCAN_ABORT_IGNORED 0x2 /* no pending scans */
-
-/* TODO: complete documentation */
-#define SCAN_OWNER_STATUS 0x1
-#define MEASURE_OWNER_STATUS 0x2
-
-/**
- * struct iwl_scan_start_notif - notifies start of scan in the device
- * ( SCAN_START_NOTIFICATION = 0x82 )
- * @tsf_low: TSF timer (lower half) in usecs
- * @tsf_high: TSF timer (higher half) in usecs
- * @beacon_timer: structured as follows:
- * bits 0:19 - beacon interval in usecs
- * bits 20:23 - reserved (0)
- * bits 24:31 - number of beacons
- * @channel: which channel is scanned
- * @band: 0 for 5.2 GHz, 1 for 2.4 GHz
- * @status: one of *_OWNER_STATUS
- */
-struct iwl_scan_start_notif {
- __le32 tsf_low;
- __le32 tsf_high;
- __le32 beacon_timer;
- u8 channel;
- u8 band;
- u8 reserved[2];
- __le32 status;
-} __packed; /* SCAN_START_NTF_API_S_VER_1 */
-
-/* scan results probe_status first bit indicates success */
-#define SCAN_PROBE_STATUS_OK 0
-#define SCAN_PROBE_STATUS_TX_FAILED BIT(0)
-/* error statuses combined with TX_FAILED */
-#define SCAN_PROBE_STATUS_FAIL_TTL BIT(1)
-#define SCAN_PROBE_STATUS_FAIL_BT BIT(2)
-
/* How many statistics are gathered for each channel */
#define SCAN_RESULTS_STATISTICS 1
return band == IEEE80211_BAND_2GHZ ? 100 + 20 : 100 + 10;
}
-static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd,
- struct cfg80211_scan_request *req,
- bool basic_ssid,
- struct iwl_mvm_scan_params *params)
-{
- struct iwl_scan_channel *chan = (struct iwl_scan_channel *)
- (cmd->data + le16_to_cpu(cmd->tx_cmd.len));
- int i;
- int type = BIT(req->n_ssids) - 1;
- enum ieee80211_band band = req->channels[0]->band;
-
- if (!basic_ssid)
- type |= BIT(req->n_ssids);
-
- for (i = 0; i < cmd->channel_count; i++) {
- chan->channel = cpu_to_le16(req->channels[i]->hw_value);
- chan->type = cpu_to_le32(type);
- if (req->channels[i]->flags & IEEE80211_CHAN_NO_IR)
- chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE);
- chan->active_dwell = cpu_to_le16(params->dwell[band].active);
- chan->passive_dwell = cpu_to_le16(params->dwell[band].passive);
- chan->iteration_count = cpu_to_le16(1);
- chan++;
- }
-}
-
-/*
- * Fill in probe request with the following parameters:
- * TA is our vif HW address, which mac80211 ensures we have.
- * Packet is broadcasted, so this is both SA and DA.
- * The probe request IE is made out of two: first comes the most prioritized
- * SSID if a directed scan is requested. Second comes whatever extra
- * information was given to us as the scan request IE.
- */
-static u16 iwl_mvm_fill_probe_req(struct ieee80211_mgmt *frame, const u8 *ta,
- int n_ssids, const u8 *ssid, int ssid_len,
- const u8 *band_ie, int band_ie_len,
- const u8 *common_ie, int common_ie_len,
- int left)
-{
- int len = 0;
- u8 *pos = NULL;
-
- /* Make sure there is enough space for the probe request,
- * two mandatory IEs and the data */
- left -= 24;
- if (left < 0)
- return 0;
-
- frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
- eth_broadcast_addr(frame->da);
- memcpy(frame->sa, ta, ETH_ALEN);
- eth_broadcast_addr(frame->bssid);
- frame->seq_ctrl = 0;
-
- len += 24;
-
- /* for passive scans, no need to fill anything */
- if (n_ssids == 0)
- return (u16)len;
-
- /* points to the payload of the request */
- pos = &frame->u.probe_req.variable[0];
-
- /* fill in our SSID IE */
- left -= ssid_len + 2;
- if (left < 0)
- return 0;
- *pos++ = WLAN_EID_SSID;
- *pos++ = ssid_len;
- if (ssid && ssid_len) { /* ssid_len may be == 0 even if ssid is valid */
- memcpy(pos, ssid, ssid_len);
- pos += ssid_len;
- }
-
- len += ssid_len + 2;
-
- if (WARN_ON(left < band_ie_len + common_ie_len))
- return len;
-
- if (band_ie && band_ie_len) {
- memcpy(pos, band_ie, band_ie_len);
- pos += band_ie_len;
- len += band_ie_len;
- }
-
- if (common_ie && common_ie_len) {
- memcpy(pos, common_ie, common_ie_len);
- pos += common_ie_len;
- len += common_ie_len;
- }
-
- return (u16)len;
-}
-
static void iwl_mvm_scan_condition_iterator(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
{
int max_probe_len;
- if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN)
- max_probe_len = SCAN_OFFLOAD_PROBE_REQ_SIZE;
- else
- max_probe_len = mvm->fw->ucode_capa.max_probe_length;
+ max_probe_len = SCAN_OFFLOAD_PROBE_REQ_SIZE;
/* we create the 802.11 header and SSID element */
max_probe_len -= 24 + 2;
- /* basic ssid is added only for hw_scan with and old api */
- if (!(mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID) &&
- !(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN) &&
- !is_sched_scan)
- max_probe_len -= 32;
-
/* DS parameter set element is added on 2.4GHZ band if required */
if (iwl_mvm_rrm_scan_needed(mvm))
max_probe_len -= 3;
{
int max_ie_len = iwl_mvm_max_scan_ie_fw_cmd_room(mvm, is_sched_scan);
- if (!(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN))
- return max_ie_len;
-
/* TODO: [BUG] This function should return the maximum allowed size of
* scan IEs, however the LMAC scan api contains both 2GHZ and 5GHZ IEs
* in the same command. So the correct implementation of this function
return max_ie_len;
}
-int iwl_mvm_scan_request(struct iwl_mvm *mvm,
- struct ieee80211_vif *vif,
- struct cfg80211_scan_request *req)
-{
- struct iwl_host_cmd hcmd = {
- .id = SCAN_REQUEST_CMD,
- .len = { 0, },
- .data = { mvm->scan_cmd, },
- .dataflags = { IWL_HCMD_DFL_NOCOPY, },
- };
- struct iwl_scan_cmd *cmd = mvm->scan_cmd;
- int ret;
- u32 status;
- int ssid_len = 0;
- u8 *ssid = NULL;
- bool basic_ssid = !(mvm->fw->ucode_capa.flags &
- IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID);
- struct iwl_mvm_scan_params params = {};
-
- lockdep_assert_held(&mvm->mutex);
-
- /* we should have failed registration if scan_cmd was NULL */
- if (WARN_ON(mvm->scan_cmd == NULL))
- return -ENOMEM;
-
- IWL_DEBUG_SCAN(mvm, "Handling mac80211 scan request\n");
- mvm->scan_status = IWL_MVM_SCAN_OS;
- memset(cmd, 0, ksize(cmd));
-
- cmd->channel_count = (u8)req->n_channels;
- cmd->quiet_time = cpu_to_le16(IWL_ACTIVE_QUIET_TIME);
- cmd->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH);
- cmd->rxchain_sel_flags = iwl_mvm_scan_rx_chain(mvm);
-
- iwl_mvm_scan_calc_params(mvm, vif, req->n_ssids, req->flags, ¶ms);
- cmd->max_out_time = cpu_to_le32(params.max_out_time);
- cmd->suspend_time = cpu_to_le32(params.suspend_time);
- if (params.passive_fragmented)
- cmd->scan_flags |= SCAN_FLAGS_FRAGMENTED_SCAN;
-
- cmd->rxon_flags = iwl_mvm_scan_rxon_flags(req->channels[0]->band);
- cmd->filter_flags = cpu_to_le32(MAC_FILTER_ACCEPT_GRP |
- MAC_FILTER_IN_BEACON);
-
- if (vif->type == NL80211_IFTYPE_P2P_DEVICE)
- cmd->type = cpu_to_le32(SCAN_TYPE_DISCOVERY_FORCED);
- else
- cmd->type = cpu_to_le32(SCAN_TYPE_FORCED);
-
- cmd->repeats = cpu_to_le32(1);
-
- /*
- * If the user asked for passive scan, don't change to active scan if
- * you see any activity on the channel - remain passive.
- */
- if (req->n_ssids > 0) {
- cmd->passive2active = cpu_to_le16(1);
- cmd->scan_flags |= SCAN_FLAGS_PASSIVE2ACTIVE;
- if (basic_ssid) {
- ssid = req->ssids[0].ssid;
- ssid_len = req->ssids[0].ssid_len;
- }
- } else {
- cmd->passive2active = 0;
- cmd->scan_flags &= ~SCAN_FLAGS_PASSIVE2ACTIVE;
- }
-
- iwl_mvm_scan_fill_ssids(cmd->direct_scan, req->ssids, req->n_ssids,
- basic_ssid ? 1 : 0);
-
- cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL |
- 3 << TX_CMD_FLG_BT_PRIO_POS);
-
- cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id;
- cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE);
- cmd->tx_cmd.rate_n_flags =
- iwl_mvm_scan_rate_n_flags(mvm, req->channels[0]->band,
- req->no_cck);
-
- cmd->tx_cmd.len =
- cpu_to_le16(iwl_mvm_fill_probe_req(
- (struct ieee80211_mgmt *)cmd->data,
- vif->addr,
- req->n_ssids, ssid, ssid_len,
- req->ie, req->ie_len, NULL, 0,
- mvm->fw->ucode_capa.max_probe_length));
-
- iwl_mvm_scan_fill_channels(cmd, req, basic_ssid, ¶ms);
-
- cmd->len = cpu_to_le16(sizeof(struct iwl_scan_cmd) +
- le16_to_cpu(cmd->tx_cmd.len) +
- (cmd->channel_count * sizeof(struct iwl_scan_channel)));
- hcmd.len[0] = le16_to_cpu(cmd->len);
-
- status = SCAN_RESPONSE_OK;
- ret = iwl_mvm_send_cmd_status(mvm, &hcmd, &status);
- if (!ret && status == SCAN_RESPONSE_OK) {
- IWL_DEBUG_SCAN(mvm, "Scan request was sent successfully\n");
- } else {
- /*
- * If the scan failed, it usually means that the FW was unable
- * to allocate the time events. Warn on it, but maybe we
- * should try to send the command again with different params.
- */
- IWL_ERR(mvm, "Scan failed! status 0x%x ret %d\n",
- status, ret);
- mvm->scan_status = IWL_MVM_SCAN_NONE;
- ret = -EIO;
- }
- return ret;
-}
-
-int iwl_mvm_rx_scan_response(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
- struct iwl_device_cmd *cmd)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl_cmd_response *resp = (void *)pkt->data;
-
- IWL_DEBUG_SCAN(mvm, "Scan response received. status 0x%x\n",
- le32_to_cpu(resp->status));
- return 0;
-}
-
int iwl_mvm_rx_scan_offload_iter_complete_notif(struct iwl_mvm *mvm,
struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd)
return 0;
}
-int iwl_mvm_rx_scan_complete(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb,
- struct iwl_device_cmd *cmd)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl_scan_complete_notif *notif = (void *)pkt->data;
-
- lockdep_assert_held(&mvm->mutex);
-
- IWL_DEBUG_SCAN(mvm, "Scan complete: status=0x%x scanned channels=%d\n",
- notif->status, notif->scanned_channels);
-
- if (mvm->scan_status == IWL_MVM_SCAN_OS)
- mvm->scan_status = IWL_MVM_SCAN_NONE;
- ieee80211_scan_completed(mvm->hw, notif->status != SCAN_COMP_STATUS_OK);
-
- iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
-
- return 0;
-}
-
int iwl_mvm_rx_scan_offload_results(struct iwl_mvm *mvm,
struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd)
{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
-
- if (!(mvm->fw->ucode_capa.capa[0] & IWL_UCODE_TLV_CAPA_UMAC_SCAN) &&
- !(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN)) {
- struct iwl_sched_scan_results *notif = (void *)pkt->data;
-
- if (!(notif->client_bitmap & SCAN_CLIENT_SCHED_SCAN))
- return 0;
- }
-
IWL_DEBUG_SCAN(mvm, "Scheduled scan results\n");
ieee80211_sched_scan_results(mvm->hw);
return 0;
}
-static bool iwl_mvm_scan_abort_notif(struct iwl_notif_wait_data *notif_wait,
- struct iwl_rx_packet *pkt, void *data)
-{
- struct iwl_mvm *mvm =
- container_of(notif_wait, struct iwl_mvm, notif_wait);
- struct iwl_scan_complete_notif *notif;
- u32 *resp;
-
- switch (pkt->hdr.cmd) {
- case SCAN_ABORT_CMD:
- resp = (void *)pkt->data;
- if (*resp == CAN_ABORT_STATUS) {
- IWL_DEBUG_SCAN(mvm,
- "Scan can be aborted, wait until completion\n");
- return false;
- }
-
- /*
- * If scan cannot be aborted, it means that we had a
- * SCAN_COMPLETE_NOTIFICATION in the pipe and it called
- * ieee80211_scan_completed already.
- */
- IWL_DEBUG_SCAN(mvm, "Scan cannot be aborted, exit now: %d\n",
- *resp);
- return true;
-
- case SCAN_COMPLETE_NOTIFICATION:
- notif = (void *)pkt->data;
- IWL_DEBUG_SCAN(mvm, "Scan aborted: status 0x%x\n",
- notif->status);
- return true;
-
- default:
- WARN_ON(1);
- return false;
- };
-}
-
-static int iwl_mvm_cancel_regular_scan(struct iwl_mvm *mvm)
-{
- struct iwl_notification_wait wait_scan_abort;
- static const u8 scan_abort_notif[] = { SCAN_ABORT_CMD,
- SCAN_COMPLETE_NOTIFICATION };
- int ret;
-
- iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_abort,
- scan_abort_notif,
- ARRAY_SIZE(scan_abort_notif),
- iwl_mvm_scan_abort_notif, NULL);
-
- ret = iwl_mvm_send_cmd_pdu(mvm, SCAN_ABORT_CMD, 0, 0, NULL);
- if (ret) {
- IWL_ERR(mvm, "Couldn't send SCAN_ABORT_CMD: %d\n", ret);
- /* mac80211's state will be cleaned in the nic_restart flow */
- goto out_remove_notif;
- }
-
- return iwl_wait_notification(&mvm->notif_wait, &wait_scan_abort, HZ);
-
-out_remove_notif:
- iwl_remove_notification(&mvm->notif_wait, &wait_scan_abort);
- return ret;
-}
-
int iwl_mvm_rx_scan_offload_complete_notif(struct iwl_mvm *mvm,
struct iwl_rx_cmd_buffer *rxb,
struct iwl_device_cmd *cmd)
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
- u8 status, ebs_status;
-
- if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN) {
- struct iwl_periodic_scan_complete *scan_notif;
+ struct iwl_periodic_scan_complete *scan_notif;
- scan_notif = (void *)pkt->data;
- status = scan_notif->status;
- ebs_status = scan_notif->ebs_status;
- } else {
- struct iwl_scan_offload_complete *scan_notif;
+ scan_notif = (void *)pkt->data;
- scan_notif = (void *)pkt->data;
- status = scan_notif->status;
- ebs_status = scan_notif->ebs_status;
- }
/* scan status must be locked for proper checking */
lockdep_assert_held(&mvm->mutex);
"%s completed, status %s, EBS status %s\n",
mvm->scan_status == IWL_MVM_SCAN_SCHED ?
"Scheduled scan" : "Scan",
- status == IWL_SCAN_OFFLOAD_COMPLETED ?
+ scan_notif->status == IWL_SCAN_OFFLOAD_COMPLETED ?
"completed" : "aborted",
- ebs_status == IWL_SCAN_EBS_SUCCESS ?
+ scan_notif->ebs_status == IWL_SCAN_EBS_SUCCESS ?
"success" : "failed");
} else if (mvm->scan_status == IWL_MVM_SCAN_OS) {
mvm->scan_status = IWL_MVM_SCAN_NONE;
ieee80211_scan_completed(mvm->hw,
- status == IWL_SCAN_OFFLOAD_ABORTED);
+ scan_notif->status == IWL_SCAN_OFFLOAD_ABORTED);
iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
}
- if (ebs_status)
+ if (scan_notif->ebs_status)
mvm->last_ebs_successful = false;
return 0;
}
-static void iwl_scan_offload_build_tx_cmd(struct iwl_mvm *mvm,
- struct ieee80211_vif *vif,
- struct ieee80211_scan_ies *ies,
- enum ieee80211_band band,
- struct iwl_tx_cmd *cmd,
- u8 *data)
-{
- u16 cmd_len;
-
- cmd->tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL);
- cmd->life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE);
- cmd->sta_id = mvm->aux_sta.sta_id;
-
- cmd->rate_n_flags = iwl_mvm_scan_rate_n_flags(mvm, band, false);
-
- cmd_len = iwl_mvm_fill_probe_req((struct ieee80211_mgmt *)data,
- vif->addr,
- 1, NULL, 0,
- ies->ies[band], ies->len[band],
- ies->common_ies, ies->common_ie_len,
- SCAN_OFFLOAD_PROBE_REQ_SIZE);
- cmd->len = cpu_to_le16(cmd_len);
-}
-
-static void iwl_build_scan_cmd(struct iwl_mvm *mvm,
- struct ieee80211_vif *vif,
- struct cfg80211_sched_scan_request *req,
- struct iwl_scan_offload_cmd *scan,
- struct iwl_mvm_scan_params *params)
-{
- scan->channel_count = req->n_channels;
- scan->quiet_time = cpu_to_le16(IWL_ACTIVE_QUIET_TIME);
- scan->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH);
- scan->good_CRC_th = IWL_GOOD_CRC_TH_DEFAULT;
- scan->rx_chain = iwl_mvm_scan_rx_chain(mvm);
-
- scan->max_out_time = cpu_to_le32(params->max_out_time);
- scan->suspend_time = cpu_to_le32(params->suspend_time);
-
- scan->filter_flags |= cpu_to_le32(MAC_FILTER_ACCEPT_GRP |
- MAC_FILTER_IN_BEACON);
- scan->scan_type = cpu_to_le32(SCAN_TYPE_BACKGROUND);
- scan->rep_count = cpu_to_le32(1);
-
- if (params->passive_fragmented)
- scan->scan_flags |= SCAN_FLAGS_FRAGMENTED_SCAN;
-}
-
static int iwl_ssid_exist(u8 *ssid, u8 ssid_len, struct iwl_ssid_ie *ssid_list)
{
int i;
}
}
-static void iwl_build_channel_cfg(struct iwl_mvm *mvm,
- struct cfg80211_sched_scan_request *req,
- u8 *channels_buffer,
- enum ieee80211_band band,
- int *head,
- u32 ssid_bitmap,
- struct iwl_mvm_scan_params *params)
-{
- u32 n_channels = mvm->fw->ucode_capa.n_scan_channels;
- __le32 *type = (__le32 *)channels_buffer;
- __le16 *channel_number = (__le16 *)(type + n_channels);
- __le16 *iter_count = channel_number + n_channels;
- __le32 *iter_interval = (__le32 *)(iter_count + n_channels);
- u8 *active_dwell = (u8 *)(iter_interval + n_channels);
- u8 *passive_dwell = active_dwell + n_channels;
- int i, index = 0;
-
- for (i = 0; i < req->n_channels; i++) {
- struct ieee80211_channel *chan = req->channels[i];
-
- if (chan->band != band)
- continue;
-
- index = *head;
- (*head)++;
-
- channel_number[index] = cpu_to_le16(chan->hw_value);
- active_dwell[index] = params->dwell[band].active;
- passive_dwell[index] = params->dwell[band].passive;
-
- iter_count[index] = cpu_to_le16(1);
- iter_interval[index] = 0;
-
- if (!(chan->flags & IEEE80211_CHAN_NO_IR))
- type[index] |=
- cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_ACTIVE);
-
- type[index] |= cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_FULL |
- IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL);
-
- if (chan->flags & IEEE80211_CHAN_NO_HT40)
- type[index] |=
- cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_NARROW);
-
- /* scan for all SSIDs from req->ssids */
- type[index] |= cpu_to_le32(ssid_bitmap);
- }
-}
-
-int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
- struct ieee80211_vif *vif,
- struct cfg80211_sched_scan_request *req,
- struct ieee80211_scan_ies *ies)
-{
- int band_2ghz = mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels;
- int band_5ghz = mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
- int head = 0;
- u32 ssid_bitmap;
- int cmd_len;
- int ret;
- u8 *probes;
- bool basic_ssid = !(mvm->fw->ucode_capa.flags &
- IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID);
-
- struct iwl_scan_offload_cfg *scan_cfg;
- struct iwl_host_cmd cmd = {
- .id = SCAN_OFFLOAD_CONFIG_CMD,
- };
- struct iwl_mvm_scan_params params = {};
-
- lockdep_assert_held(&mvm->mutex);
-
- cmd_len = sizeof(struct iwl_scan_offload_cfg) +
- mvm->fw->ucode_capa.n_scan_channels * IWL_SCAN_CHAN_SIZE +
- 2 * SCAN_OFFLOAD_PROBE_REQ_SIZE;
-
- scan_cfg = kzalloc(cmd_len, GFP_KERNEL);
- if (!scan_cfg)
- return -ENOMEM;
-
- probes = scan_cfg->data +
- mvm->fw->ucode_capa.n_scan_channels * IWL_SCAN_CHAN_SIZE;
-
- iwl_mvm_scan_calc_params(mvm, vif, req->n_ssids, 0, ¶ms);
- iwl_build_scan_cmd(mvm, vif, req, &scan_cfg->scan_cmd, ¶ms);
- scan_cfg->scan_cmd.len = cpu_to_le16(cmd_len);
-
- iwl_scan_offload_build_ssid(req, scan_cfg->scan_cmd.direct_scan,
- &ssid_bitmap, basic_ssid);
- /* build tx frames for supported bands */
- if (band_2ghz) {
- iwl_scan_offload_build_tx_cmd(mvm, vif, ies,
- IEEE80211_BAND_2GHZ,
- &scan_cfg->scan_cmd.tx_cmd[0],
- probes);
- iwl_build_channel_cfg(mvm, req, scan_cfg->data,
- IEEE80211_BAND_2GHZ, &head,
- ssid_bitmap, ¶ms);
- }
- if (band_5ghz) {
- iwl_scan_offload_build_tx_cmd(mvm, vif, ies,
- IEEE80211_BAND_5GHZ,
- &scan_cfg->scan_cmd.tx_cmd[1],
- probes +
- SCAN_OFFLOAD_PROBE_REQ_SIZE);
- iwl_build_channel_cfg(mvm, req, scan_cfg->data,
- IEEE80211_BAND_5GHZ, &head,
- ssid_bitmap, ¶ms);
- }
-
- cmd.data[0] = scan_cfg;
- cmd.len[0] = cmd_len;
- cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
-
- IWL_DEBUG_SCAN(mvm, "Sending scheduled scan config\n");
-
- ret = iwl_mvm_send_cmd(mvm, &cmd);
- kfree(scan_cfg);
- return ret;
-}
-
int iwl_mvm_config_sched_scan_profiles(struct iwl_mvm *mvm,
struct cfg80211_sched_scan_request *req)
{
return true;
}
-int iwl_mvm_sched_scan_start(struct iwl_mvm *mvm,
- struct cfg80211_sched_scan_request *req)
-{
- struct iwl_scan_offload_req scan_req = {
- .watchdog = IWL_SCHED_SCAN_WATCHDOG,
-
- .schedule_line[0].iterations = IWL_FAST_SCHED_SCAN_ITERATIONS,
- .schedule_line[0].delay = cpu_to_le16(req->interval / 1000),
- .schedule_line[0].full_scan_mul = 1,
-
- .schedule_line[1].iterations = 0xff,
- .schedule_line[1].delay = cpu_to_le16(req->interval / 1000),
- .schedule_line[1].full_scan_mul = IWL_FULL_SCAN_MULTIPLIER,
- };
-
- if (iwl_mvm_scan_pass_all(mvm, req))
- scan_req.flags |= cpu_to_le16(IWL_SCAN_OFFLOAD_FLAG_PASS_ALL);
-
- if (mvm->last_ebs_successful &&
- mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_EBS_SUPPORT)
- scan_req.flags |=
- cpu_to_le16(IWL_SCAN_OFFLOAD_FLAG_EBS_ACCURATE_MODE);
-
- return iwl_mvm_send_cmd_pdu(mvm, SCAN_OFFLOAD_REQUEST_CMD, 0,
- sizeof(scan_req), &scan_req);
-}
-
int iwl_mvm_scan_offload_start(struct iwl_mvm *mvm,
struct ieee80211_vif *vif,
struct cfg80211_sched_scan_request *req,
if (ret)
return ret;
ret = iwl_mvm_sched_scan_umac(mvm, vif, req, ies);
- } else if ((mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN)) {
- mvm->scan_status = IWL_MVM_SCAN_SCHED;
- ret = iwl_mvm_config_sched_scan_profiles(mvm, req);
- if (ret)
- return ret;
- ret = iwl_mvm_unified_sched_scan_lmac(mvm, vif, req, ies);
} else {
mvm->scan_status = IWL_MVM_SCAN_SCHED;
- ret = iwl_mvm_config_sched_scan(mvm, vif, req, ies);
- if (ret)
- return ret;
ret = iwl_mvm_config_sched_scan_profiles(mvm, req);
if (ret)
return ret;
- ret = iwl_mvm_sched_scan_start(mvm, req);
+ ret = iwl_mvm_unified_sched_scan_lmac(mvm, vif, req, ies);
}
return ret;
/* Exit instantly with error when device is not ready
* to receive scan abort command or it does not perform
* scheduled scan currently */
- if (mvm->scan_status != IWL_MVM_SCAN_SCHED &&
- (!(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN) ||
- mvm->scan_status != IWL_MVM_SCAN_OS))
+ if (mvm->scan_status == IWL_MVM_SCAN_NONE)
return -EIO;
ret = iwl_mvm_send_cmd_status(mvm, &cmd, &status);
if (iwl_mvm_is_radio_killed(mvm))
goto out;
- if (mvm->scan_status != IWL_MVM_SCAN_SCHED &&
- (!(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN) ||
- mvm->scan_status != IWL_MVM_SCAN_OS)) {
- IWL_DEBUG_SCAN(mvm, "No scan to stop\n");
- return 0;
- }
-
iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_done,
scan_done_notif,
ARRAY_SIZE(scan_done_notif),
return 0;
}
- if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN)
- return iwl_mvm_scan_offload_stop(mvm, true);
- return iwl_mvm_cancel_regular_scan(mvm);
+ return iwl_mvm_scan_offload_stop(mvm, true);
}
/* UMAC scan API */
mvm->fw->ucode_capa.n_scan_channels +
sizeof(struct iwl_scan_req_umac_tail);
- if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN)
- return sizeof(struct iwl_scan_req_unified_lmac) +
- sizeof(struct iwl_scan_channel_cfg_lmac) *
- mvm->fw->ucode_capa.n_scan_channels +
- sizeof(struct iwl_scan_probe_req);
-
- return sizeof(struct iwl_scan_cmd) +
- mvm->fw->ucode_capa.max_probe_length +
- mvm->fw->ucode_capa.n_scan_channels *
- sizeof(struct iwl_scan_channel);
+ return sizeof(struct iwl_scan_req_unified_lmac) +
+ sizeof(struct iwl_scan_channel_cfg_lmac) *
+ mvm->fw->ucode_capa.n_scan_channels +
+ sizeof(struct iwl_scan_probe_req);
}
projects / sdk / emulator / emulator-kernel.git / commitdiff