/*
- * (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
+ * (c) 2003-2006 Advanced Micro Devices, Inc.
* Your use of this code is subject to the terms and conditions of the
* GNU general public license version 2. See "COPYING" or
* http://www.gnu.org/licenses/gpl.html
* Based upon datasheets & sample CPUs kindly provided by AMD.
*
* Valuable input gratefully received from Dave Jones, Pavel Machek,
- * Dominik Brodowski, and others.
+ * Dominik Brodowski, Jacob Shin, and others.
* Originally developed by Paul Devriendt.
* Processor information obtained from Chapter 9 (Power and Thermal Management)
* of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
-#define VERSION "version 1.60.2"
+#define VERSION "version 2.00.00"
#include "powernow-k8.h"
/* serialize freq changes */
static struct powernow_k8_data *powernow_data[NR_CPUS];
+static int cpu_family = CPU_OPTERON;
+
#ifndef CONFIG_SMP
static cpumask_t cpu_core_map[1];
#endif
return 800 + (fid * 100);
}
+
/* Return a frequency in KHz, given an input fid */
static u32 find_khz_freq_from_fid(u32 fid)
{
return 1000 * find_freq_from_fid(fid);
}
-/* Return a voltage in miliVolts, given an input vid */
-static u32 find_millivolts_from_vid(struct powernow_k8_data *data, u32 vid)
+/* Return a frequency in MHz, given an input fid and did */
+static u32 find_freq_from_fiddid(u32 fid, u32 did)
+{
+ return 100 * (fid + 0x10) >> did;
+}
+
+static u32 find_khz_freq_from_fiddid(u32 fid, u32 did)
{
- return 1550-vid*25;
+ return 1000 * find_freq_from_fiddid(fid, did);
+}
+
+static u32 find_fid_from_pstate(u32 pstate)
+{
+ u32 hi, lo;
+ rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi);
+ return lo & HW_PSTATE_FID_MASK;
+}
+
+static u32 find_did_from_pstate(u32 pstate)
+{
+ u32 hi, lo;
+ rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi);
+ return (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
}
/* Return the vco fid for an input fid
{
u32 lo, hi;
+ if (cpu_family)
+ return 0;
+
rdmsr(MSR_FIDVID_STATUS, lo, hi);
return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0;
}
u32 lo, hi;
u32 i = 0;
+ if (cpu_family) {
+ rdmsr(MSR_PSTATE_STATUS, lo, hi);
+ i = lo & HW_PSTATE_MASK;
+ rdmsr(MSR_PSTATE_DEF_BASE + i, lo, hi);
+ data->currfid = lo & HW_PSTATE_FID_MASK;
+ data->currdid = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
+ return 0;
+ }
do {
if (i++ > 10000) {
dprintk("detected change pending stuck\n");
do {
wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
if (i++ > 100) {
- printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+ printk(KERN_ERR PFX "Hardware error - pending bit very stuck - no further pstate changes possible\n");
return 1;
}
} while (query_current_values_with_pending_wait(data));
return 0;
}
-/* Change the fid and vid, by the 3 phases. */
+/* Change hardware pstate by single MSR write */
+static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
+{
+ wrmsr(MSR_PSTATE_CTRL, pstate, 0);
+ data->currfid = find_fid_from_pstate(pstate);
+ return 0;
+}
+
+/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */
static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid)
{
if (core_voltage_pre_transition(data, reqvid))
goto out;
eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
- if ((eax & CPUID_XFAM) != CPUID_XFAM_K8)
+ if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) &&
+ ((eax & CPUID_XFAM) < CPUID_XFAM_10H))
goto out;
- if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
- ((eax & CPUID_XMOD) > CPUID_XMOD_REV_G)) {
- printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
- goto out;
- }
+ if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
+ if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
+ ((eax & CPUID_XMOD) > CPUID_XMOD_REV_G)) {
+ printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
+ goto out;
+ }
- eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
- if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
- printk(KERN_INFO PFX
- "No frequency change capabilities detected\n");
- goto out;
- }
+ eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
+ if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
+ printk(KERN_INFO PFX
+ "No frequency change capabilities detected\n");
+ goto out;
+ }
- cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
- if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) {
- printk(KERN_INFO PFX "Power state transitions not supported\n");
- goto out;
+ cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
+ if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) {
+ printk(KERN_INFO PFX "Power state transitions not supported\n");
+ goto out;
+ }
+ } else { /* must be a HW Pstate capable processor */
+ cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
+ if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE)
+ cpu_family = CPU_HW_PSTATE;
+ else
+ goto out;
}
rc = 1;
{
int j;
for (j = 0; j < data->numps; j++) {
- if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID)
- printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x (%d mV)\n", j,
+ if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) {
+ if (cpu_family) {
+ printk(KERN_INFO PFX " %d : fid 0x%x gid 0x%x (%d MHz)\n", j, (data->powernow_table[j].index & 0xff00) >> 8,
+ (data->powernow_table[j].index & 0xff0000) >> 16,
+ data->powernow_table[j].frequency/1000);
+ } else {
+ printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x\n", j,
data->powernow_table[j].index & 0xff,
data->powernow_table[j].frequency/1000,
- data->powernow_table[j].index >> 8,
- find_millivolts_from_vid(data, data->powernow_table[j].index >> 8));
+ data->powernow_table[j].index >> 8);
+ }
+ }
}
if (data->batps)
printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps);
#ifdef CONFIG_X86_POWERNOW_K8_ACPI
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
{
- if (!data->acpi_data.state_count)
+ if (!data->acpi_data.state_count || cpu_family)
return;
data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
{
- int i;
- int cntlofreq = 0;
struct cpufreq_frequency_table *powernow_table;
+ int ret_val;
if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
dprintk("register performance failed: bad ACPI data\n");
goto err_out;
}
+ if (cpu_family)
+ ret_val = fill_powernow_table_pstate(data, powernow_table);
+ else
+ ret_val = fill_powernow_table_fidvid(data, powernow_table);
+ if (ret_val)
+ goto err_out_mem;
+
+ powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
+ powernow_table[data->acpi_data.state_count].index = 0;
+ data->powernow_table = powernow_table;
+
+ /* fill in data */
+ data->numps = data->acpi_data.state_count;
+ print_basics(data);
+ powernow_k8_acpi_pst_values(data, 0);
+
+ /* notify BIOS that we exist */
+ acpi_processor_notify_smm(THIS_MODULE);
+
+ return 0;
+
+err_out_mem:
+ kfree(powernow_table);
+
+err_out:
+ acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+
+ /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
+ data->acpi_data.state_count = 0;
+
+ return -ENODEV;
+}
+
+static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
+{
+ int i;
+
+ for (i = 0; i < data->acpi_data.state_count; i++) {
+ u32 index;
+ u32 hi = 0, lo = 0;
+ u32 fid;
+ u32 did;
+
+ index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
+ if (index > MAX_HW_PSTATE) {
+ printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index);
+ printk(KERN_ERR PFX "Please report to BIOS manufacturer\n");
+ }
+ rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
+ if (!(hi & HW_PSTATE_VALID_MASK)) {
+ dprintk("invalid pstate %d, ignoring\n", index);
+ powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ }
+
+ fid = lo & HW_PSTATE_FID_MASK;
+ did = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
+
+ dprintk(" %d : fid 0x%x, did 0x%x\n", index, fid, did);
+
+ powernow_table[i].index = index | (fid << HW_FID_INDEX_SHIFT) | (did << HW_DID_INDEX_SHIFT);
+
+ powernow_table[i].frequency = find_khz_freq_from_fiddid(fid, did);
+
+ if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
+ printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
+ powernow_table[i].frequency,
+ (unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
+ powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ }
+ }
+ return 0;
+}
+
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
+{
+ int i;
+ int cntlofreq = 0;
for (i = 0; i < data->acpi_data.state_count; i++) {
u32 fid;
u32 vid;
if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
(powernow_table[i].index != powernow_table[cntlofreq].index)) {
printk(KERN_ERR PFX "Too many lo freq table entries\n");
- goto err_out_mem;
+ return 1;
}
dprintk("double low frequency table entry, ignoring it.\n");
continue;
}
}
-
- powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
- powernow_table[data->acpi_data.state_count].index = 0;
- data->powernow_table = powernow_table;
-
- /* fill in data */
- data->numps = data->acpi_data.state_count;
- print_basics(data);
- powernow_k8_acpi_pst_values(data, 0);
-
- /* notify BIOS that we exist */
- acpi_processor_notify_smm(THIS_MODULE);
-
return 0;
-
-err_out_mem:
- kfree(powernow_table);
-
-err_out:
- acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
-
- /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
- data->acpi_data.state_count = 0;
-
- return -ENODEV;
}
static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
#endif /* CONFIG_X86_POWERNOW_K8_ACPI */
/* Take a frequency, and issue the fid/vid transition command */
-static int transition_frequency(struct powernow_k8_data *data, unsigned int index)
+static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned int index)
{
- u32 fid;
- u32 vid;
+ u32 fid = 0;
+ u32 vid = 0;
int res, i;
struct cpufreq_freqs freqs;
dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
+ /* fid/vid correctness check for k8 */
/* fid are the lower 8 bits of the index we stored into
- * the cpufreq frequency table in find_psb_table, vid are
- * the upper 8 bits.
+ * the cpufreq frequency table in find_psb_table, vid
+ * are the upper 8 bits.
*/
-
fid = data->powernow_table[index].index & 0xFF;
vid = (data->powernow_table[index].index & 0xFF00) >> 8;
dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
smp_processor_id(), fid, vid);
-
- freqs.cpu = data->cpu;
freqs.old = find_khz_freq_from_fid(data->currfid);
freqs.new = find_khz_freq_from_fid(fid);
- for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+
+ for_each_cpu_mask(i, *(data->available_cores)) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
res = transition_fid_vid(data, fid, vid);
-
freqs.new = find_khz_freq_from_fid(data->currfid);
- for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+
+ for_each_cpu_mask(i, *(data->available_cores)) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
+ return res;
+}
+
+/* Take a frequency, and issue the hardware pstate transition command */
+static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index)
+{
+ u32 fid = 0;
+ u32 did = 0;
+ u32 pstate = 0;
+ int res, i;
+ struct cpufreq_freqs freqs;
+
+ dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
+
+ /* get fid did for hardware pstate transition */
+ pstate = index & HW_PSTATE_MASK;
+ if (pstate > MAX_HW_PSTATE)
+ return 0;
+ fid = (index & HW_FID_INDEX_MASK) >> HW_FID_INDEX_SHIFT;
+ did = (index & HW_DID_INDEX_MASK) >> HW_DID_INDEX_SHIFT;
+ freqs.old = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+ freqs.new = find_khz_freq_from_fiddid(fid, did);
+
+ for_each_cpu_mask(i, *(data->available_cores)) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ }
+
+ res = transition_pstate(data, pstate);
+ data->currfid = find_fid_from_pstate(pstate);
+ data->currdid = find_did_from_pstate(pstate);
+ freqs.new = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+
+ for_each_cpu_mask(i, *(data->available_cores)) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
if (query_current_values_with_pending_wait(data))
goto err_out;
- dprintk("targ: curr fid 0x%x, vid 0x%x\n",
+ if (cpu_family)
+ dprintk("targ: curr fid 0x%x, did 0x%x\n",
+ data->currfid, data->currvid);
+ else {
+ dprintk("targ: curr fid 0x%x, vid 0x%x\n",
data->currfid, data->currvid);
- if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
- printk(KERN_INFO PFX
- "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
- checkfid, data->currfid, checkvid, data->currvid);
+ if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
+ printk(KERN_INFO PFX
+ "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
+ checkfid, data->currfid, checkvid, data->currvid);
+ }
}
if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
powernow_k8_acpi_pst_values(data, newstate);
- if (transition_frequency(data, newstate)) {
+ if (cpu_family)
+ ret = transition_frequency_pstate(data, newstate);
+ else
+ ret = transition_frequency_fidvid(data, newstate);
+ if (ret) {
printk(KERN_ERR PFX "transition frequency failed\n");
ret = 1;
mutex_unlock(&fidvid_mutex);
}
mutex_unlock(&fidvid_mutex);
- pol->cur = find_khz_freq_from_fid(data->currfid);
+ if (cpu_family)
+ pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+ else
+ pol->cur = find_khz_freq_from_fid(data->currfid);
ret = 0;
err_out:
* Use the PSB BIOS structure. This is only availabe on
* an UP version, and is deprecated by AMD.
*/
-
if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) {
printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
kfree(data);
return -ENODEV;
}
if (pol->cpu != 0) {
- printk(KERN_ERR PFX "init not cpu 0\n");
+ printk(KERN_ERR PFX "No _PSS objects for CPU other than CPU0\n");
kfree(data);
return -ENODEV;
}
if (query_current_values_with_pending_wait(data))
goto err_out;
- fidvid_msr_init();
+ if (!cpu_family)
+ fidvid_msr_init();
/* run on any CPU again */
set_cpus_allowed(current, oldmask);
pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
- pol->cpus = cpu_core_map[pol->cpu];
+ if (cpu_family)
+ pol->cpus = cpumask_of_cpu(pol->cpu);
+ else
+ pol->cpus = cpu_core_map[pol->cpu];
+ data->available_cores = &(pol->cpus);
/* Take a crude guess here.
* That guess was in microseconds, so multiply with 1000 */
pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US)
+ (3 * (1 << data->irt) * 10)) * 1000;
- pol->cur = find_khz_freq_from_fid(data->currfid);
+ if (cpu_family)
+ pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+ else
+ pol->cur = find_khz_freq_from_fid(data->currfid);
dprintk("policy current frequency %d kHz\n", pol->cur);
/* min/max the cpu is capable of */
cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
- printk("cpu_init done, current fid 0x%x, vid 0x%x\n",
- data->currfid, data->currvid);
+ if (cpu_family)
+ dprintk("cpu_init done, current fid 0x%x, did 0x%x\n",
+ data->currfid, data->currdid);
+ else
+ dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n",
+ data->currfid, data->currvid);
powernow_data[pol->cpu] = data;
}
if (supported_cpus == num_online_cpus()) {
- printk(KERN_INFO PFX "Found %d AMD Athlon 64 / Opteron "
- "processors (" VERSION ")\n", supported_cpus);
+ printk(KERN_INFO PFX "Found %d %s "
+ "processors (" VERSION ")\n", supported_cpus,
+ boot_cpu_data.x86_model_id);
return cpufreq_register_driver(&cpufreq_amd64_driver);
}
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff