#include <asm/machdep.h>
#include <asm/pci-bridge.h>
-#include <syslib/mpc52xx_pci.h>
-
extern int powersave_nap;
static void __init
lite5200_setup_cpu(void)
{
- struct mpc52xx_cdm __iomem *cdm;
struct mpc52xx_gpio __iomem *gpio;
struct mpc52xx_intr __iomem *intr;
- struct mpc52xx_xlb __iomem *xlb;
u32 port_config;
u32 intr_ctrl;
/* Map zones */
- cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
- xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
- if (!cdm || !gpio || !xlb || !intr) {
- printk("lite5200.c: Error while mapping CDM/GPIO/XLB/INTR during"
- "lite5200_setup_cpu\n");
+ if (!gpio || !intr) {
+ printk(KERN_ERR __FILE__ ": "
+ "Error while mapping GPIO/INTR during "
+ "lite5200_setup_cpu\n");
goto unmap_regs;
}
- /* Use internal 48 Mhz */
- out_8(&cdm->ext_48mhz_en, 0x00);
- out_8(&cdm->fd_enable, 0x01);
- if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
- out_be16(&cdm->fd_counters, 0x0001);
- else
- out_be16(&cdm->fd_counters, 0x5555);
-
/* Get port mux config */
port_config = in_be32(&gpio->port_config);
port_config &= ~0x00007000; /* Differential mode - USB1 only */
port_config |= 0x00001000;
+ /* ATA CS is on csb_4/5 */
+ port_config &= ~0x03000000;
+ port_config |= 0x01000000;
+
/* Commit port config */
out_be32(&gpio->port_config, port_config);
- /* Configure the XLB Arbiter */
- out_be32(&xlb->master_pri_enable, 0xff);
- out_be32(&xlb->master_priority, 0x11111111);
-
- /* Enable ram snooping for 1GB window */
- out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
- out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
-
/* IRQ[0-3] setup */
intr_ctrl = in_be32(&intr->ctrl);
intr_ctrl &= ~0x00ff0000;
/* Unmap reg zone */
unmap_regs:
- if (cdm) iounmap(cdm);
if (gpio) iounmap(gpio);
- if (xlb) iounmap(xlb);
if (intr) iounmap(intr);
}
lite5200_setup_arch(void)
{
/* CPU & Port mux setup */
- lite5200_setup_cpu();
+ mpc52xx_setup_cpu(); /* Generic */
+ lite5200_setup_cpu(); /* Platform specific */
#ifdef CONFIG_PCI
/* PCI Bridge setup */
#include <asm/pgtable.h>
#include <asm/ppcboot.h>
+#include <syslib/mpc52xx_pci.h>
+
extern bd_t __res;
static int core_mult[] = { /* CPU Frequency multiplier, taken */
tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000);
}
+
+void __init
+mpc52xx_setup_cpu(void)
+{
+ struct mpc52xx_cdm __iomem *cdm;
+ struct mpc52xx_xlb __iomem *xlb;
+
+ /* Map zones */
+ cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
+ xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
+
+ if (!cdm || !xlb) {
+ printk(KERN_ERR __FILE__ ": "
+ "Error while mapping CDM/XLB during "
+ "mpc52xx_setup_cpu\n");
+ goto unmap_regs;
+ }
+
+ /* Use internal 48 Mhz */
+ out_8(&cdm->ext_48mhz_en, 0x00);
+ out_8(&cdm->fd_enable, 0x01);
+ if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
+ out_be16(&cdm->fd_counters, 0x0001);
+ else
+ out_be16(&cdm->fd_counters, 0x5555);
+
+ /* Configure the XLB Arbiter priorities */
+ out_be32(&xlb->master_pri_enable, 0xff);
+ out_be32(&xlb->master_priority, 0x11111111);
+
+ /* Enable ram snooping for 1GB window */
+ out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
+ out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
+
+ /* Disable XLB pipelining */
+ /* (cfr errate 292. We could do this only just before ATA PIO
+ transaction and re-enable it after ...) */
+ out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
+
+ /* Unmap reg zone */
+unmap_regs:
+ if (cdm) iounmap(cdm);
+ if (xlb) iounmap(xlb);
+}
+
+
int mpc52xx_match_psc_function(int psc_idx, const char *func)
{
struct mpc52xx_psc_func *cf = mpc52xx_psc_functions;