PCI: Add Loongson PCI Controller support
authorJiaxun Yang <jiaxun.yang@flygoat.com>
Tue, 26 May 2020 09:21:13 +0000 (17:21 +0800)
committerThomas Bogendoerfer <tsbogend@alpha.franken.de>
Wed, 27 May 2020 10:52:30 +0000 (12:52 +0200)
This controller can be found on Loongson-2K SoC, Loongson-3
systems with RS780E/LS7A PCH.

The RS780E part of code was previously located at
arch/mips/pci/ops-loongson3.c and now it can use generic PCI
driver implementation.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
drivers/pci/controller/Kconfig
drivers/pci/controller/Makefile
drivers/pci/controller/pci-loongson.c [new file with mode: 0644]

index 91bfdb7..ae36edb 100644 (file)
@@ -258,6 +258,16 @@ config PCI_HYPERV_INTERFACE
          The Hyper-V PCI Interface is a helper driver allows other drivers to
          have a common interface with the Hyper-V PCI frontend driver.
 
+config PCI_LOONGSON
+       bool "LOONGSON PCI Controller"
+       depends on MACH_LOONGSON64 || COMPILE_TEST
+       depends on OF
+       depends on PCI_QUIRKS
+       default MACH_LOONGSON64
+       help
+         Say Y here if you want to enable PCI controller support on
+         Loongson systems.
+
 source "drivers/pci/controller/dwc/Kconfig"
 source "drivers/pci/controller/mobiveil/Kconfig"
 source "drivers/pci/controller/cadence/Kconfig"
index 158c597..fbac4b0 100644 (file)
@@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
 obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
 obj-$(CONFIG_VMD) += vmd.o
 obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
+obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
 # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
 obj-y                          += dwc/
 obj-y                          += mobiveil/
diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
new file mode 100644 (file)
index 0000000..459009c
--- /dev/null
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Loongson PCI Host Controller Driver
+ *
+ * Copyright (C) 2020 Jiaxun Yang <jiaxun.yang@flygoat.com>
+ */
+
+#include <linux/of_device.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include "../pci.h"
+
+/* Device IDs */
+#define DEV_PCIE_PORT_0        0x7a09
+#define DEV_PCIE_PORT_1        0x7a19
+#define DEV_PCIE_PORT_2        0x7a29
+
+#define DEV_LS2K_APB   0x7a02
+#define DEV_LS7A_CONF  0x7a10
+#define DEV_LS7A_LPC   0x7a0c
+
+#define FLAG_CFG0      BIT(0)
+#define FLAG_CFG1      BIT(1)
+#define FLAG_DEV_FIX   BIT(2)
+
+struct loongson_pci {
+       void __iomem *cfg0_base;
+       void __iomem *cfg1_base;
+       struct platform_device *pdev;
+       u32 flags;
+};
+
+/* Fixup wrong class code in PCIe bridges */
+static void bridge_class_quirk(struct pci_dev *dev)
+{
+       dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON,
+                       DEV_PCIE_PORT_0, bridge_class_quirk);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON,
+                       DEV_PCIE_PORT_1, bridge_class_quirk);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON,
+                       DEV_PCIE_PORT_2, bridge_class_quirk);
+
+static void system_bus_quirk(struct pci_dev *pdev)
+{
+       /*
+        * The address space consumed by these devices is outside the
+        * resources of the host bridge.
+        */
+       pdev->mmio_always_on = 1;
+       pdev->non_compliant_bars = 1;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+                       DEV_LS2K_APB, system_bus_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+                       DEV_LS7A_CONF, system_bus_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+                       DEV_LS7A_LPC, system_bus_quirk);
+
+static void loongson_mrrs_quirk(struct pci_dev *dev)
+{
+       struct pci_bus *bus = dev->bus;
+       struct pci_dev *bridge;
+       static const struct pci_device_id bridge_devids[] = {
+               { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) },
+               { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) },
+               { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) },
+               { 0, },
+       };
+
+       /* look for the matching bridge */
+       while (!pci_is_root_bus(bus)) {
+               bridge = bus->self;
+               bus = bus->parent;
+               /*
+                * Some Loongson PCIe ports have a h/w limitation of
+                * 256 bytes maximum read request size. They can't handle
+                * anything larger than this. So force this limit on
+                * any devices attached under these ports.
+                */
+               if (pci_match_id(bridge_devids, bridge)) {
+                       if (pcie_get_readrq(dev) > 256) {
+                               pci_info(dev, "limiting MRRS to 256\n");
+                               pcie_set_readrq(dev, 256);
+                       }
+                       break;
+               }
+       }
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk);
+
+static void __iomem *cfg1_map(struct loongson_pci *priv, int bus,
+                               unsigned int devfn, int where)
+{
+       unsigned long addroff = 0x0;
+
+       if (bus != 0)
+               addroff |= BIT(28); /* Type 1 Access */
+       addroff |= (where & 0xff) | ((where & 0xf00) << 16);
+       addroff |= (bus << 16) | (devfn << 8);
+       return priv->cfg1_base + addroff;
+}
+
+static void __iomem *cfg0_map(struct loongson_pci *priv, int bus,
+                               unsigned int devfn, int where)
+{
+       unsigned long addroff = 0x0;
+
+       if (bus != 0)
+               addroff |= BIT(24); /* Type 1 Access */
+       addroff |= (bus << 16) | (devfn << 8) | where;
+       return priv->cfg0_base + addroff;
+}
+
+static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devfn,
+                              int where)
+{
+       unsigned char busnum = bus->number;
+       struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
+       struct loongson_pci *priv =  pci_host_bridge_priv(bridge);
+
+       /*
+        * Do not read more than one device on the bus other than
+        * the host bus. For our hardware the root bus is always bus 0.
+        */
+       if (priv->flags & FLAG_DEV_FIX && busnum != 0 &&
+               PCI_SLOT(devfn) > 0)
+               return NULL;
+
+       /* CFG0 can only access standard space */
+       if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base)
+               return cfg0_map(priv, busnum, devfn, where);
+
+       /* CFG1 can access extended space */
+       if (where < PCI_CFG_SPACE_EXP_SIZE && priv->cfg1_base)
+               return cfg1_map(priv, busnum, devfn, where);
+
+       return NULL;
+}
+
+static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+       int irq;
+       u8 val;
+
+       irq = of_irq_parse_and_map_pci(dev, slot, pin);
+       if (irq > 0)
+               return irq;
+
+       /* Care i8259 legacy systems */
+       pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &val);
+       /* i8259 only have 15 IRQs */
+       if (val > 15)
+               return 0;
+
+       return val;
+}
+
+/* H/w only accept 32-bit PCI operations */
+static struct pci_ops loongson_pci_ops = {
+       .map_bus = pci_loongson_map_bus,
+       .read   = pci_generic_config_read32,
+       .write  = pci_generic_config_write32,
+};
+
+static const struct of_device_id loongson_pci_of_match[] = {
+       { .compatible = "loongson,ls2k-pci",
+               .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), },
+       { .compatible = "loongson,ls7a-pci",
+               .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), },
+       { .compatible = "loongson,rs780e-pci",
+               .data = (void *)(FLAG_CFG0), },
+       {}
+};
+
+static int loongson_pci_probe(struct platform_device *pdev)
+{
+       struct loongson_pci *priv;
+       struct device *dev = &pdev->dev;
+       struct device_node *node = dev->of_node;
+       struct pci_host_bridge *bridge;
+       struct resource *regs;
+       int err;
+
+       if (!node)
+               return -ENODEV;
+
+       bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv));
+       if (!bridge)
+               return -ENODEV;
+
+       priv = pci_host_bridge_priv(bridge);
+       priv->pdev = pdev;
+       priv->flags = (unsigned long)of_device_get_match_data(dev);
+
+       regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!regs) {
+               dev_err(dev, "missing mem resources for cfg0\n");
+               return -EINVAL;
+       }
+
+       priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs);
+       if (IS_ERR(priv->cfg0_base))
+               return PTR_ERR(priv->cfg0_base);
+
+       /* CFG1 is optional */
+       if (priv->flags & FLAG_CFG1) {
+               regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+               if (!regs)
+                       dev_info(dev, "missing mem resource for cfg1\n");
+               else {
+                       priv->cfg1_base = devm_pci_remap_cfg_resource(dev, regs);
+                       if (IS_ERR(priv->cfg1_base))
+                               priv->cfg1_base = NULL;
+               }
+       }
+
+       err = pci_parse_request_of_pci_ranges(dev, &bridge->windows,
+                                               &bridge->dma_ranges, NULL);
+       if (err) {
+               dev_err(dev, "failed to get bridge resources\n");
+               return err;
+       }
+
+       bridge->dev.parent = dev;
+       bridge->sysdata = priv;
+       bridge->ops = &loongson_pci_ops;
+       bridge->map_irq = loongson_map_irq;
+
+       err = pci_host_probe(bridge);
+       if (err)
+               return err;
+
+       return 0;
+}
+
+static struct platform_driver loongson_pci_driver = {
+       .driver = {
+               .name = "loongson-pci",
+               .of_match_table = loongson_pci_of_match,
+       },
+       .probe = loongson_pci_probe,
+};
+builtin_platform_driver(loongson_pci_driver);