* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include "sun5i.dtsi"
+
#include <dt-bindings/clock/sun5i-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/reset/sun5i-ccu.h>
/ {
- interrupt-parent = <&intc>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a8";
- reg = <0x0>;
- clocks = <&ccu CLK_CPU>;
- };
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- osc24M: clk@01c20050 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
-
- osc32k: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
- };
-
display-engine {
compatible = "allwinner,sun5i-a13-display-engine";
allwinner,pipelines = <&fe0>;
};
soc@01c00000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- sram-controller@01c00000 {
- compatible = "allwinner,sun4i-a10-sram-controller";
- reg = <0x01c00000 0x30>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- sram_a: sram@00000000 {
- compatible = "mmio-sram";
- reg = <0x00000000 0xc000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x00000000 0xc000>;
- };
-
- sram_d: sram@00010000 {
- compatible = "mmio-sram";
- reg = <0x00010000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x00010000 0x1000>;
-
- otg_sram: sram-section@0000 {
- compatible = "allwinner,sun4i-a10-sram-d";
- reg = <0x0000 0x1000>;
- status = "disabled";
- };
- };
- };
-
- dma: dma-controller@01c02000 {
- compatible = "allwinner,sun4i-a10-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <27>;
- clocks = <&ccu CLK_AHB_DMA>;
- #dma-cells = <2>;
- };
-
- nfc: nand@01c03000 {
- compatible = "allwinner,sun4i-a10-nand";
- reg = <0x01c03000 0x1000>;
- interrupts = <37>;
- clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 3>;
- dma-names = "rxtx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi0: spi@01c05000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c05000 0x1000>;
- interrupts = <10>;
- clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 27>,
- <&dma SUN4I_DMA_DEDICATED 26>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@01c06000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c06000 0x1000>;
- interrupts = <11>;
- clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 9>,
- <&dma SUN4I_DMA_DEDICATED 8>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- tve0: tv-encoder@01c0a000 {
- compatible = "allwinner,sun4i-a10-tv-encoder";
- reg = <0x01c0a000 0x1000>;
- clocks = <&ccu CLK_AHB_TVE>;
- resets = <&ccu RST_TVE>;
- status = "disabled";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tve0_in_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_out_tve0>;
- };
- };
- };
-
- tcon0: lcd-controller@01c0c000 {
- compatible = "allwinner,sun5i-a13-tcon";
- reg = <0x01c0c000 0x1000>;
- interrupts = <44>;
- resets = <&ccu RST_LCD>;
- reset-names = "lcd";
- clocks = <&ccu CLK_AHB_LCD>,
- <&ccu CLK_TCON_CH0>,
- <&ccu CLK_TCON_CH1>;
- clock-names = "ahb",
- "tcon-ch0",
- "tcon-ch1";
- clock-output-names = "tcon-pixel-clock";
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tcon0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- tcon0_in_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_out_tcon0>;
- };
- };
-
- tcon0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- tcon0_out_tve0: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&tve0_in_tcon0>;
- };
- };
- };
- };
-
- mmc0: mmc@01c0f000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
- clock-names = "ahb", "mmc";
- interrupts = <32>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc1: mmc@01c10000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c10000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
- clock-names = "ahb", "mmc";
- interrupts = <33>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc2: mmc@01c11000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
- clock-names = "ahb", "mmc";
- interrupts = <34>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- usb_otg: usb@01c13000 {
- compatible = "allwinner,sun4i-a10-musb";
- reg = <0x01c13000 0x0400>;
- clocks = <&ccu CLK_AHB_OTG>;
- interrupts = <38>;
- interrupt-names = "mc";
- phys = <&usbphy 0>;
- phy-names = "usb";
- extcon = <&usbphy 0>;
- allwinner,sram = <&otg_sram 1>;
- status = "disabled";
-
- dr_mode = "otg";
- };
-
- usbphy: phy@01c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-phy";
- reg = <0x01c13400 0x10 0x01c14800 0x4>;
- reg-names = "phy_ctrl", "pmu1";
- clocks = <&ccu CLK_USB_PHY0>;
- clock-names = "usb_phy";
- resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
- reset-names = "usb0_reset", "usb1_reset";
- status = "disabled";
- };
-
- ehci0: usb@01c14000 {
- compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
- reg = <0x01c14000 0x100>;
- interrupts = <39>;
- clocks = <&ccu CLK_AHB_EHCI>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci0: usb@01c14400 {
- compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
- reg = <0x01c14400 0x100>;
- interrupts = <40>;
- clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
- interrupts = <12>;
- clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 29>,
- <&dma SUN4I_DMA_DEDICATED 28>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- ccu: clock@01c20000 {
- compatible = "nextthing,gr8-ccu";
- reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
- clock-names = "hosc", "losc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- intc: interrupt-controller@01c20400 {
- compatible = "allwinner,sun4i-a10-ic";
- reg = <0x01c20400 0x400>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- pio: pinctrl@01c20800 {
- compatible = "nextthing,gr8-pinctrl";
- reg = <0x01c20800 0x400>;
- interrupts = <28>;
- clocks = <&ccu CLK_APB0_PIO>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <3>;
- #gpio-cells = <3>;
-
- i2c0_pins_a: i2c0@0 {
- pins = "PB0", "PB1";
- function = "i2c0";
- };
-
- i2c1_pins_a: i2c1@0 {
- pins = "PB15", "PB16";
- function = "i2c1";
- };
-
- i2c2_pins_a: i2c2@0 {
- pins = "PB17", "PB18";
- function = "i2c2";
- };
-
- i2s0_data_pins_a: i2s0-data@0 {
- pins = "PB6", "PB7", "PB8", "PB9";
- function = "i2s0";
- };
-
- i2s0_mclk_pins_a: i2s0-mclk@0 {
- pins = "PB5";
- function = "i2s0";
- };
-
- ir0_rx_pins_a: ir0@0 {
- pins = "PB4";
- function = "ir0";
- };
-
- lcd_rgb666_pins: lcd-rgb666@0 {
- pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
- "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
- "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
- "PD24", "PD25", "PD26", "PD27";
- function = "lcd0";
- };
-
- mmc0_pins_a: mmc0@0 {
- pins = "PF0", "PF1", "PF2", "PF3",
- "PF4", "PF5";
- function = "mmc0";
- drive-strength = <30>;
- };
-
- nand_pins_a: nand-base0@0 {
- pins = "PC0", "PC1", "PC2",
- "PC5", "PC8", "PC9", "PC10",
- "PC11", "PC12", "PC13", "PC14",
- "PC15";
- function = "nand0";
- };
-
- nand_cs0_pins_a: nand-cs@0 {
- pins = "PC4";
- function = "nand0";
- };
-
- nand_rb0_pins_a: nand-rb@0 {
- pins = "PC6";
- function = "nand0";
- };
-
- pwm0_pins_a: pwm0@0 {
- pins = "PB2";
- function = "pwm0";
- };
-
- pwm1_pins: pwm1 {
- pins = "PG13";
- function = "pwm1";
- };
-
- spdif_tx_pins_a: spdif@0 {
- pins = "PB10";
- function = "spdif";
- bias-pull-up;
- };
-
- uart1_pins_a: uart1@1 {
- pins = "PG3", "PG4";
- function = "uart1";
- };
-
- uart1_cts_rts_pins_a: uart1-cts-rts@0 {
- pins = "PG5", "PG6";
- function = "uart1";
- };
-
- uart2_pins_a: uart2@1 {
- pins = "PD2", "PD3";
- function = "uart2";
- };
-
- uart2_cts_rts_pins_a: uart2-cts-rts@0 {
- pins = "PD4", "PD5";
- function = "uart2";
- };
-
- uart3_pins_a: uart3@1 {
- pins = "PG9", "PG10";
- function = "uart3";
- };
-
- uart3_cts_rts_pins_a: uart3-cts-rts@0 {
- pins = "PG11", "PG12";
- function = "uart3";
- };
- };
-
pwm: pwm@01c20e00 {
compatible = "allwinner,sun5i-a10s-pwm";
reg = <0x01c20e00 0xc>;
status = "disabled";
};
- timer@01c20c00 {
- compatible = "allwinner,sun4i-a10-timer";
- reg = <0x01c20c00 0x90>;
- interrupts = <22>;
- clocks = <&ccu CLK_HOSC>;
- };
-
- wdt: watchdog@01c20c90 {
- compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- };
-
spdif: spdif@01c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-spdif";
status = "disabled";
};
- ir0: ir@01c21800 {
- compatible = "allwinner,sun4i-a10-ir";
- clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>;
- clock-names = "apb", "ir";
- interrupts = <5>;
- reg = <0x01c21800 0x40>;
- status = "disabled";
- };
-
i2s0: i2s@01c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
dma-names = "rx", "tx";
status = "disabled";
};
+ };
+};
- lradc: lradc@01c22800 {
- compatible = "allwinner,sun4i-a10-lradc-keys";
- reg = <0x01c22800 0x100>;
- interrupts = <31>;
- status = "disabled";
- };
-
- codec: codec@01c22c00 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec";
- reg = <0x01c22c00 0x40>;
- interrupts = <30>;
- clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
- clock-names = "apb", "codec";
- dmas = <&dma SUN4I_DMA_NORMAL 19>,
- <&dma SUN4I_DMA_NORMAL 19>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- rtp: rtp@01c25000 {
- compatible = "allwinner,sun5i-a13-ts";
- reg = <0x01c25000 0x100>;
- interrupts = <29>;
- #thermal-sensor-cells = <0>;
- };
-
- uart1: serial@01c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <2>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART1>;
- status = "disabled";
- };
-
- uart2: serial@01c28800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28800 0x400>;
- interrupts = <3>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART2>;
- status = "disabled";
- };
-
- uart3: serial@01c28c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28c00 0x400>;
- interrupts = <4>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_APB1_UART3>;
- status = "disabled";
- };
-
- i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <7>;
- clocks = <&ccu CLK_APB1_I2C0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <8>;
- clocks = <&ccu CLK_APB1_I2C1>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b400 0x400>;
- interrupts = <9>;
- clocks = <&ccu CLK_APB1_I2C2>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- timer@01c60000 {
- compatible = "allwinner,sun5i-a13-hstimer";
- reg = <0x01c60000 0x1000>;
- interrupts = <82>, <83>;
- clocks = <&ccu CLK_AHB_HSTIMER>;
- };
-
- fe0: display-frontend@01e00000 {
- compatible = "allwinner,sun5i-a13-display-frontend";
- reg = <0x01e00000 0x20000>;
- interrupts = <47>;
- clocks = <&ccu CLK_AHB_DE_FE>, <&ccu CLK_DE_FE>,
- <&ccu CLK_DRAM_DE_FE>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_FE>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- fe0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- fe0_out_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_in_fe0>;
- };
- };
- };
- };
-
- be0: display-backend@01e60000 {
- compatible = "allwinner,sun5i-a13-display-backend";
- reg = <0x01e60000 0x10000>;
- clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
- <&ccu CLK_DRAM_DE_BE>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&ccu RST_DE_BE>;
- status = "disabled";
+&ccu {
+ compatible = "nextthing,gr8-ccu";
+};
- assigned-clocks = <&ccu CLK_DE_BE>;
- assigned-clock-rates = <300000000>;
+&pio {
+ compatible = "nextthing,gr8-pinctrl";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ i2s0_data_pins_a: i2s0-data@0 {
+ pins = "PB6", "PB7", "PB8", "PB9";
+ function = "i2s0";
+ };
- be0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
+ i2s0_mclk_pins_a: i2s0-mclk@0 {
+ pins = "PB5";
+ function = "i2s0";
+ };
- be0_in_fe0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&fe0_out_be0>;
- };
- };
+ pwm1_pins: pwm1 {
+ pins = "PG13";
+ function = "pwm1";
+ };
- be0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
+ spdif_tx_pins_a: spdif@0 {
+ pins = "PB10";
+ function = "spdif";
+ bias-pull-up;
+ };
- be0_out_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_in_be0>;
- };
- };
- };
- };
+ uart1_cts_rts_pins_a: uart1-cts-rts@0 {
+ pins = "PG5", "PG6";
+ function = "uart1";
};
};
projects / platform / kernel / linux-rpi.git / commitdiff