mtd: nand: mxc: use dev_dbg to print debug messages

When a struct device * is around use dev_dbg instead of pr_debug
to give the messages more context.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 04d31af..f3be0b2 100644 (file)
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -415,7 +415,7 @@ static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
  * waits for completion. */
 static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
 {
-       pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+       dev_dbg(host->dev, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
 
        writew(cmd, NFC_V1_V2_FLASH_CMD);
        writew(NFC_CMD, NFC_V1_V2_CONFIG2);
@@ -431,7 +431,7 @@ static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
                        udelay(1);
                }
                if (max_retries < 0)
-                       pr_debug("%s: RESET failed\n", __func__);
+                       dev_dbg(host->dev, "%s: RESET failed\n", __func__);
        } else {
                /* Wait for operation to complete */
                wait_op_done(host, useirq);
@@ -454,7 +454,7 @@ static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
  * a NAND command. */
 static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
 {
-       pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
+       dev_dbg(host->dev, "send_addr(host, 0x%x %d)\n", addr, islast);
 
        writew(addr, NFC_V1_V2_FLASH_ADDR);
        writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
@@ -607,7 +607,7 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
        uint16_t ecc_status = get_ecc_status_v1(host);
 
        if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
-               pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+               dev_dbg(host->dev, "HWECC uncorrectable 2-bit ECC error\n");
                return -EBADMSG;
        }
 
@@ -642,7 +642,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
                ecc_stat >>= 4;
        } while (--no_subpages);
 
-       pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
+       dev_dbg(host->dev, "%d Symbol Correctable RS-ECC Error\n", ret);
 
        return ret;
 }
@@ -673,7 +673,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
                host->buf_start++;
        }
 
-       pr_debug("%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start);
+       dev_dbg(host->dev, "%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start);
        return ret;
 }
 
@@ -1211,7 +1211,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
        struct nand_chip *nand_chip = mtd_to_nand(mtd);
        struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
 
-       pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+       dev_dbg(host->dev, "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
              command, column, page_addr);
 
        /* Reset command state information */