arm: Remove more remnants of bcmcygnus

Remove some leftover files from the bcmcygnus platform.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bdd535f..97c25b4 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -357,7 +357,7 @@ config SYS_ARM_ARCH
 
 choice
        prompt "Select the ARM data write cache policy"
-       default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || TARGET_BCMNS || RZA1
+       default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMNS || RZA1
        default SYS_ARM_CACHE_WRITEBACK
 
 config SYS_ARM_CACHE_WRITEBACK
@@ -668,19 +668,6 @@ config TARGET_VEXPRESS_CA9X4
        select CPU_V7A
        select PL011_SERIAL
 
-config TARGET_BCMCYGNUS
-       bool "Support bcmcygnus"
-       select CPU_V7A
-       select GPIO_EXTRA_HEADER
-       select IPROC
-       imply BCM_SF2_ETH
-       imply BCM_SF2_ETH_GMAC
-       imply CMD_HASH
-       imply CRC32_VERIFY
-       imply FAT_WRITE
-       imply HASH_VERIFY
-       imply NETDEVICES
-
 config TARGET_BCMNS
        bool "Support Broadcom Northstar"
        select CPU_V7A

diff --git a/board/broadcom/bcm_ep/Makefile b/board/broadcom/bcm_ep/Makefile
deleted file mode 100644 (file)
index 29a3ea7..0000000
--- a/board/broadcom/bcm_ep/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2014 Broadcom Corporation.
-
-obj-y  += board.o

diff --git a/board/broadcom/bcm_ep/board.c b/board/broadcom/bcm_ep/board.c
deleted file mode 100644 (file)
index e91fa40..0000000
--- a/board/broadcom/bcm_ep/board.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Broadcom Corporation.
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <net.h>
-#include <asm/cache.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <config.h>
-#include <netdev.h>
-#include <asm/system.h>
-#include <asm/iproc-common/armpll.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * board_init - early hardware init
- */
-int board_init(void)
-{
-       /*
-        * Address of boot parameters passed to kernel
-        * Use default offset 0x100
-        */
-       gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
-
-       return 0;
-}
-
-/*
- * dram_init - sets u-boot's idea of sdram size
- */
-int dram_init(void)
-{
-       gd->ram_size = get_ram_size((long *)CFG_SYS_SDRAM_BASE,
-                                   CFG_SYS_SDRAM_SIZE);
-       return 0;
-}
-
-int dram_init_banksize(void)
-{
-       gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
-       gd->bd->bi_dram[0].size = gd->ram_size;
-
-       return 0;
-}
-
-int board_early_init_f(void)
-{
-       uint32_t status = 0;
-
-       /* Setup PLL if required */
-#if defined(CONFIG_ARMCLK)
-       armpll_config(CONFIG_ARMCLK);
-#endif
-
-       return status;
-}
-
-#ifdef CONFIG_ARMV7_NONSEC
-void smp_set_core_boot_addr(unsigned long addr, int corenr)
-{
-}
-
-void smp_kick_all_cpus(void)
-{
-}
-
-void smp_waitloop(unsigned previous_address)
-{
-}
-#endif
-
-#ifdef CONFIG_BCM_SF2_ETH
-int board_eth_init(struct bd_info *bis)
-{
-       int rc = -1;
-       printf("Registering BCM sf2 eth\n");
-       rc = bcm_sf2_eth_register(bis, 0);
-       return rc;
-}
-#endif