qlcnic: Add hwmon interface to export board temperature.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig
index c14bd31..b818432 100644 (file)
--- a/drivers/net/ethernet/qlogic/Kconfig
+++ b/drivers/net/ethernet/qlogic/Kconfig
@@ -66,6 +66,17 @@ config QLCNIC_VXLAN
          Say Y here if you want to enable hardware offload support for
          Virtual eXtensible Local Area Network (VXLAN) in the driver.
 
+config QLCNIC_HWMON
+       bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
+       depends on QLCNIC && HWMON
+       default y
+       ---help---
+         This configuration parameter can be used to read the
+         board temperature in Converged Ethernet devices
+         supported by qlcnic.
+
+         This data is available via the hwmon sysfs interface.
+
 config QLGE
        tristate "QLogic QLGE 10Gb Ethernet Driver Support"
        depends on PCI

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 7b52a88..381da04 100644 (file)
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -537,6 +537,7 @@ struct qlcnic_hardware_context {
        u8 phys_port_id[ETH_ALEN];
        u8 lb_mode;
        u16 vxlan_port;
+       struct device *hwmon_dev;
 };
 
 struct qlcnic_adapter_stats {
@@ -2361,4 +2362,18 @@ static inline u32 qlcnic_get_vnic_func_count(struct qlcnic_adapter *adapter)
        else
                return QLC_DEFAULT_VNIC_COUNT;
 }
+
+#ifdef CONFIG_QLCNIC_HWMON
+void qlcnic_register_hwmon_dev(struct qlcnic_adapter *);
+void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *);
+#else
+static inline void qlcnic_register_hwmon_dev(struct qlcnic_adapter *adapter)
+{
+       return;
+}
+static inline void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *adapter)
+{
+       return;
+}
+#endif
 #endif                         /* __QLCNIC_H_ */

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 73f908a..19878fb 100644 (file)
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -2593,7 +2593,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
                qlcnic_alloc_lb_filters_mem(adapter);
 
        qlcnic_add_sysfs(adapter);
-
+       qlcnic_register_hwmon_dev(adapter);
        return 0;
 
 err_out_disable_mbx_intr:
@@ -2700,6 +2700,8 @@ static void qlcnic_remove(struct pci_dev *pdev)
 
        qlcnic_remove_sysfs(adapter);
 
+       qlcnic_unregister_hwmon_dev(adapter);
+
        qlcnic_cleanup_pci_map(adapter->ahw);
 
        qlcnic_release_firmware(adapter);

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
index cd346e2..eee5fc9 100644 (file)
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
@@ -19,6 +19,10 @@
 #include <linux/sysfs.h>
 #include <linux/aer.h>
 #include <linux/log2.h>
+#ifdef CONFIG_QLCNIC_HWMON
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#endif
 
 #define QLC_STATUS_UNSUPPORTED_CMD     -2
 
@@ -1243,6 +1247,68 @@ static struct bin_attribute bin_attr_flash = {
        .write = qlcnic_83xx_sysfs_flash_write_handler,
 };
 
+#ifdef CONFIG_QLCNIC_HWMON
+
+static ssize_t qlcnic_hwmon_show_temp(struct device *dev,
+                                     struct device_attribute *dev_attr,
+                                     char *buf)
+{
+       struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
+       unsigned int temperature = 0, value = 0;
+
+       if (qlcnic_83xx_check(adapter))
+               value = QLCRDX(adapter->ahw, QLC_83XX_ASIC_TEMP);
+       else if (qlcnic_82xx_check(adapter))
+               value = QLC_SHARED_REG_RD32(adapter, QLCNIC_ASIC_TEMP);
+
+       temperature = qlcnic_get_temp_val(value);
+       /* display millidegree celcius */
+       temperature *= 1000;
+       return sprintf(buf, "%u\n", temperature);
+}
+
+/* hwmon-sysfs attributes */
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+                         qlcnic_hwmon_show_temp, NULL, 1);
+
+static struct attribute *qlcnic_hwmon_attrs[] = {
+       &sensor_dev_attr_temp1_input.dev_attr.attr,
+       NULL
+};
+
+ATTRIBUTE_GROUPS(qlcnic_hwmon);
+
+void qlcnic_register_hwmon_dev(struct qlcnic_adapter *adapter)
+{
+       struct device *dev = &adapter->pdev->dev;
+       struct device *hwmon_dev;
+
+       /* Skip hwmon registration for a VF device */
+       if (qlcnic_sriov_vf_check(adapter)) {
+               adapter->ahw->hwmon_dev = NULL;
+               return;
+       }
+       hwmon_dev = hwmon_device_register_with_groups(dev, qlcnic_driver_name,
+                                                     adapter,
+                                                     qlcnic_hwmon_groups);
+       if (IS_ERR(hwmon_dev)) {
+               dev_err(dev, "Cannot register with hwmon, err=%ld\n",
+                       PTR_ERR(hwmon_dev));
+               hwmon_dev = NULL;
+       }
+       adapter->ahw->hwmon_dev = hwmon_dev;
+}
+
+void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *adapter)
+{
+       struct device *hwmon_dev = adapter->ahw->hwmon_dev;
+       if (hwmon_dev) {
+               hwmon_device_unregister(hwmon_dev);
+               adapter->ahw->hwmon_dev = NULL;
+       }
+}
+#endif
+
 void qlcnic_create_sysfs_entries(struct qlcnic_adapter *adapter)
 {
        struct device *dev = &adapter->pdev->dev;