is because all such devices are initially set to runtime-suspended with
runtime PM disabled.
+ This feature also can be controlled by device drivers by using the
+ ``DPM_FLAG_NEVER_SKIP`` and ``DPM_FLAG_SMART_PREPARE`` driver power
+ management flags. [Typically, they are set at the time the driver is
+ probed against the device in question by passing them to the
+ :c:func:`dev_pm_set_driver_flags` helper function.] If the first of
+ these flags is set, the PM core will not apply the direct-complete
+ procedure described above to the given device and, consequenty, to any
+ of its ancestors. The second flag, when set, informs the middle layer
+ code (bus types, device types, PM domains, classes) that it should take
+ the return value of the ``->prepare`` callback provided by the driver
+ into account and it may only return a positive value from its own
+ ``->prepare`` callback if the driver's one also has returned a positive
+ value.
+
2. The ``->suspend`` methods should quiesce the device to stop it from
performing I/O. They also may save the device registers and put it into
the appropriate low-power state, depending on the bus type the device is
from their ``->prepare`` and ``->suspend`` callbacks (or equivalent) *before*
invoking device drivers' ``->suspend`` callbacks (or equivalent).
+Some bus types and PM domains have a policy to resume all devices from runtime
+suspend upfront in their ``->suspend`` callbacks, but that may not be really
+necessary if the driver of the device can cope with runtime-suspended devices.
+The driver can indicate that by setting ``DPM_FLAG_SMART_SUSPEND`` in
+:c:member:`power.driver_flags` at the probe time, by passing it to the
+:c:func:`dev_pm_set_driver_flags` helper. That also may cause middle-layer code
+(bus types, PM domains etc.) to skip the ``->suspend_late`` and
+``->suspend_noirq`` callbacks provided by the driver if the device remains in
+runtime suspend at the beginning of the ``suspend_late`` phase of system-wide
+suspend (or in the ``poweroff_late`` phase of hibernation), when runtime PM
+has been disabled for it, under the assumption that its state should not change
+after that point until the system-wide transition is over. If that happens, the
+driver's system-wide resume callbacks, if present, may still be invoked during
+the subsequent system-wide resume transition and the device's runtime power
+management status may be set to "active" before enabling runtime PM for it,
+so the driver must be prepared to cope with the invocation of its system-wide
+resume callbacks back-to-back with its ``->runtime_suspend`` one (without the
+intervening ``->runtime_resume`` and so on) and the final state of the device
+must reflect the "active" status for runtime PM in that case.
+
During system-wide resume from a sleep state it's easiest to put devices into
the full-power state, as explained in :file:`Documentation/power/runtime_pm.txt`.
Refer to that document for more information regarding this particular issue as
.suspend(), .freeze(), and .poweroff() members and one resume routine is to
be pointed to by the .resume(), .thaw(), and .restore() members.
+3.1.19. Driver Flags for Power Management
+
+The PM core allows device drivers to set flags that influence the handling of
+power management for the devices by the core itself and by middle layer code
+including the PCI bus type. The flags should be set once at the driver probe
+time with the help of the dev_pm_set_driver_flags() function and they should not
+be updated directly afterwards.
+
+The DPM_FLAG_NEVER_SKIP flag prevents the PM core from using the direct-complete
+mechanism allowing device suspend/resume callbacks to be skipped if the device
+is in runtime suspend when the system suspend starts. That also affects all of
+the ancestors of the device, so this flag should only be used if absolutely
+necessary.
+
+The DPM_FLAG_SMART_PREPARE flag instructs the PCI bus type to only return a
+positive value from pci_pm_prepare() if the ->prepare callback provided by the
+driver of the device returns a positive value. That allows the driver to opt
+out from using the direct-complete mechanism dynamically.
+
+The DPM_FLAG_SMART_SUSPEND flag tells the PCI bus type that from the driver's
+perspective the device can be safely left in runtime suspend during system
+suspend. That causes pci_pm_suspend(), pci_pm_freeze() and pci_pm_poweroff()
+to skip resuming the device from runtime suspend unless there are PCI-specific
+reasons for doing that. Also, it causes pci_pm_suspend_late/noirq(),
+pci_pm_freeze_late/noirq() and pci_pm_poweroff_late/noirq() to return early
+if the device remains in runtime suspend in the beginning of the "late" phase
+of the system-wide transition under way. Moreover, if the device is in
+runtime suspend in pci_pm_resume_noirq() or pci_pm_restore_noirq(), its runtime
+power management status will be changed to "active" (as it is going to be put
+into D0 going forward), but if it is in runtime suspend in pci_pm_thaw_noirq(),
+the function will set the power.direct_complete flag for it (to make the PM core
+skip the subsequent "thaw" callbacks for it) and return.
+
3.2. Device Runtime Power Management
------------------------------------
In addition to providing device power management callbacks PCI device drivers
#ifdef CONFIG_PM_SLEEP
static int acpi_lpss_suspend_late(struct device *dev)
{
- int ret = pm_generic_suspend_late(dev);
+ int ret;
+
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ return 0;
+ ret = pm_generic_suspend_late(dev);
return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
}
.complete = acpi_subsys_complete,
.suspend = acpi_subsys_suspend,
.suspend_late = acpi_lpss_suspend_late,
+ .suspend_noirq = acpi_subsys_suspend_noirq,
+ .resume_noirq = acpi_subsys_resume_noirq,
.resume_early = acpi_lpss_resume_early,
.freeze = acpi_subsys_freeze,
+ .freeze_late = acpi_subsys_freeze_late,
+ .freeze_noirq = acpi_subsys_freeze_noirq,
+ .thaw_noirq = acpi_subsys_thaw_noirq,
.poweroff = acpi_subsys_suspend,
.poweroff_late = acpi_lpss_suspend_late,
+ .poweroff_noirq = acpi_subsys_suspend_noirq,
+ .restore_noirq = acpi_subsys_resume_noirq,
.restore_early = acpi_lpss_resume_early,
#endif
.runtime_suspend = acpi_lpss_runtime_suspend,
u32 sys_target = acpi_target_system_state();
int ret, state;
- if (device_may_wakeup(dev) != !!adev->wakeup.prepare_count)
+ if (!pm_runtime_suspended(dev) || !adev ||
+ device_may_wakeup(dev) != !!adev->wakeup.prepare_count)
return true;
if (sys_target == ACPI_STATE_S0)
int acpi_subsys_prepare(struct device *dev)
{
struct acpi_device *adev = ACPI_COMPANION(dev);
- int ret;
- ret = pm_generic_prepare(dev);
- if (ret < 0)
- return ret;
+ if (dev->driver && dev->driver->pm && dev->driver->pm->prepare) {
+ int ret = dev->driver->pm->prepare(dev);
- if (!adev || !pm_runtime_suspended(dev))
- return 0;
+ if (ret < 0)
+ return ret;
+
+ if (!ret && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE))
+ return 0;
+ }
return !acpi_dev_needs_resume(dev, adev);
}
* acpi_subsys_suspend - Run the device driver's suspend callback.
* @dev: Device to handle.
*
- * Follow PCI and resume devices suspended at run time before running their
- * system suspend callbacks.
+ * Follow PCI and resume devices from runtime suspend before running their
+ * system suspend callbacks, unless the driver can cope with runtime-suspended
+ * devices during system suspend and there are no ACPI-specific reasons for
+ * resuming them.
*/
int acpi_subsys_suspend(struct device *dev)
{
- pm_runtime_resume(dev);
+ if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) ||
+ acpi_dev_needs_resume(dev, ACPI_COMPANION(dev)))
+ pm_runtime_resume(dev);
+
return pm_generic_suspend(dev);
}
EXPORT_SYMBOL_GPL(acpi_subsys_suspend);
*/
int acpi_subsys_suspend_late(struct device *dev)
{
- int ret = pm_generic_suspend_late(dev);
+ int ret;
+
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ return 0;
+
+ ret = pm_generic_suspend_late(dev);
return ret ? ret : acpi_dev_suspend(dev, device_may_wakeup(dev));
}
EXPORT_SYMBOL_GPL(acpi_subsys_suspend_late);
/**
+ * acpi_subsys_suspend_noirq - Run the device driver's "noirq" suspend callback.
+ * @dev: Device to suspend.
+ */
+int acpi_subsys_suspend_noirq(struct device *dev)
+{
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ return 0;
+
+ return pm_generic_suspend_noirq(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_suspend_noirq);
+
+/**
+ * acpi_subsys_resume_noirq - Run the device driver's "noirq" resume callback.
+ * @dev: Device to handle.
+ */
+int acpi_subsys_resume_noirq(struct device *dev)
+{
+ /*
+ * Devices with DPM_FLAG_SMART_SUSPEND may be left in runtime suspend
+ * during system suspend, so update their runtime PM status to "active"
+ * as they will be put into D0 going forward.
+ */
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ pm_runtime_set_active(dev);
+
+ return pm_generic_resume_noirq(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_resume_noirq);
+
+/**
* acpi_subsys_resume_early - Resume device using ACPI.
* @dev: Device to Resume.
*
* runtime-suspended devices should not be touched during freeze/thaw
* transitions.
*/
- pm_runtime_resume(dev);
+ if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND))
+ pm_runtime_resume(dev);
+
return pm_generic_freeze(dev);
}
EXPORT_SYMBOL_GPL(acpi_subsys_freeze);
+/**
+ * acpi_subsys_freeze_late - Run the device driver's "late" freeze callback.
+ * @dev: Device to handle.
+ */
+int acpi_subsys_freeze_late(struct device *dev)
+{
+
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ return 0;
+
+ return pm_generic_freeze_late(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_freeze_late);
+
+/**
+ * acpi_subsys_freeze_noirq - Run the device driver's "noirq" freeze callback.
+ * @dev: Device to handle.
+ */
+int acpi_subsys_freeze_noirq(struct device *dev)
+{
+
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ return 0;
+
+ return pm_generic_freeze_noirq(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_freeze_noirq);
+
+/**
+ * acpi_subsys_thaw_noirq - Run the device driver's "noirq" thaw callback.
+ * @dev: Device to handle.
+ */
+int acpi_subsys_thaw_noirq(struct device *dev)
+{
+ /*
+ * If the device is in runtime suspend, the "thaw" code may not work
+ * correctly with it, so skip the driver callback and make the PM core
+ * skip all of the subsequent "thaw" callbacks for the device.
+ */
+ if (dev_pm_smart_suspend_and_suspended(dev)) {
+ dev->power.direct_complete = true;
+ return 0;
+ }
+
+ return pm_generic_thaw_noirq(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_thaw_noirq);
#endif /* CONFIG_PM_SLEEP */
static struct dev_pm_domain acpi_general_pm_domain = {
.complete = acpi_subsys_complete,
.suspend = acpi_subsys_suspend,
.suspend_late = acpi_subsys_suspend_late,
+ .suspend_noirq = acpi_subsys_suspend_noirq,
+ .resume_noirq = acpi_subsys_resume_noirq,
.resume_early = acpi_subsys_resume_early,
.freeze = acpi_subsys_freeze,
+ .freeze_late = acpi_subsys_freeze_late,
+ .freeze_noirq = acpi_subsys_freeze_noirq,
+ .thaw_noirq = acpi_subsys_thaw_noirq,
.poweroff = acpi_subsys_suspend,
.poweroff_late = acpi_subsys_suspend_late,
+ .poweroff_noirq = acpi_subsys_suspend_noirq,
+ .restore_noirq = acpi_subsys_resume_noirq,
.restore_early = acpi_subsys_resume_early,
#endif
},
if (dev->pm_domain && dev->pm_domain->dismiss)
dev->pm_domain->dismiss(dev);
pm_runtime_reinit(dev);
+ dev_pm_set_driver_flags(dev, 0);
switch (ret) {
case -EPROBE_DEFER:
if (dev->pm_domain && dev->pm_domain->dismiss)
dev->pm_domain->dismiss(dev);
pm_runtime_reinit(dev);
+ dev_pm_set_driver_flags(dev, 0);
klist_remove(&dev->p->knode_driver);
device_pm_check_callbacks(dev);
/*------------------------- Resume routines -------------------------*/
/**
- * device_resume_noirq - Execute an "early resume" callback for given device.
+ * device_resume_noirq - Execute a "noirq resume" callback for given device.
* @dev: Device to handle.
* @state: PM transition of the system being carried out.
* @async: If true, the device is being resumed asynchronously.
goto Driver;
}
- if (dev->class) {
- if (dev->class->pm) {
- info = "class ";
- callback = pm_op(dev->class->pm, state);
- goto Driver;
- } else if (dev->class->resume) {
- info = "legacy class ";
- callback = dev->class->resume;
- goto End;
- }
+ if (dev->class && dev->class->pm) {
+ info = "class ";
+ callback = pm_op(dev->class->pm, state);
+ goto Driver;
}
if (dev->bus) {
}
/**
- * device_suspend_noirq - Execute a "late suspend" callback for given device.
+ * __device_suspend_noirq - Execute a "noirq suspend" callback for given device.
* @dev: Device to handle.
* @state: PM transition of the system being carried out.
* @async: If true, the device is being suspended asynchronously.
}
/**
- * device_suspend_late - Execute a "late suspend" callback for given device.
+ * __device_suspend_late - Execute a "late suspend" callback for given device.
* @dev: Device to handle.
* @state: PM transition of the system being carried out.
* @async: If true, the device is being suspended asynchronously.
}
/**
- * device_suspend - Execute "suspend" callbacks for given device.
+ * __device_suspend - Execute "suspend" callbacks for given device.
* @dev: Device to handle.
* @state: PM transition of the system being carried out.
* @async: If true, the device is being suspended asynchronously.
goto Run;
}
- if (dev->class) {
- if (dev->class->pm) {
- info = "class ";
- callback = pm_op(dev->class->pm, state);
- goto Run;
- } else if (dev->class->suspend) {
- pm_dev_dbg(dev, state, "legacy class ");
- error = legacy_suspend(dev, state, dev->class->suspend,
- "legacy class ");
- goto End;
- }
+ if (dev->class && dev->class->pm) {
+ info = "class ";
+ callback = pm_op(dev->class->pm, state);
+ goto Run;
}
if (dev->bus) {
if (dev->power.syscore)
return 0;
+ WARN_ON(dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) &&
+ !pm_runtime_enabled(dev));
+
/*
* If a device's parent goes into runtime suspend at the wrong time,
* it won't be possible to resume the device. To prevent this we
* applies to suspend transitions, however.
*/
spin_lock_irq(&dev->power.lock);
- dev->power.direct_complete = ret > 0 && state.event == PM_EVENT_SUSPEND;
+ dev->power.direct_complete = state.event == PM_EVENT_SUSPEND &&
+ pm_runtime_suspended(dev) && ret > 0 &&
+ !dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP);
spin_unlock_irq(&dev->power.lock);
return 0;
}
dev->power.no_pm_callbacks =
(!dev->bus || (pm_ops_is_empty(dev->bus->pm) &&
!dev->bus->suspend && !dev->bus->resume)) &&
- (!dev->class || (pm_ops_is_empty(dev->class->pm) &&
- !dev->class->suspend && !dev->class->resume)) &&
+ (!dev->class || pm_ops_is_empty(dev->class->pm)) &&
(!dev->type || pm_ops_is_empty(dev->type->pm)) &&
(!dev->pm_domain || pm_ops_is_empty(&dev->pm_domain->ops)) &&
(!dev->driver || (pm_ops_is_empty(dev->driver->pm) &&
!dev->driver->suspend && !dev->driver->resume));
spin_unlock_irq(&dev->power.lock);
}
+
+bool dev_pm_smart_suspend_and_suspended(struct device *dev)
+{
+ return dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) &&
+ pm_runtime_status_suspended(dev);
+}
*
* Check if the time is right and queue a suspend request.
*/
-static void pm_suspend_timer_fn(unsigned long data)
+static void pm_suspend_timer_fn(struct timer_list *t)
{
- struct device *dev = (struct device *)data;
+ struct device *dev = from_timer(dev, t, power.suspend_timer);
unsigned long flags;
unsigned long expires;
INIT_WORK(&dev->power.work, pm_runtime_work);
dev->power.timer_expires = 0;
- setup_timer(&dev->power.suspend_timer, pm_suspend_timer_fn,
- (unsigned long)dev);
+ timer_setup(&dev->power.suspend_timer, pm_suspend_timer_fn, 0);
init_waitqueue_head(&dev->power.wait_queue);
}
static DEFINE_SPINLOCK(events_lock);
-static void pm_wakeup_timer_fn(unsigned long data);
+static void pm_wakeup_timer_fn(struct timer_list *t);
static LIST_HEAD(wakeup_sources);
return;
spin_lock_init(&ws->lock);
- setup_timer(&ws->timer, pm_wakeup_timer_fn, (unsigned long)ws);
+ timer_setup(&ws->timer, pm_wakeup_timer_fn, 0);
ws->active = false;
ws->last_time = ktime_get();
* Use timer struct to check if the given source is initialized
* by wakeup_source_add.
*/
- return ws->timer.function != pm_wakeup_timer_fn ||
- ws->timer.data != (unsigned long)ws;
+ return ws->timer.function != (TIMER_FUNC_TYPE)pm_wakeup_timer_fn;
}
/*
* in @data if it is currently active and its timer has not been canceled and
* the expiration time of the timer is not in future.
*/
-static void pm_wakeup_timer_fn(unsigned long data)
+static void pm_wakeup_timer_fn(struct timer_list *t)
{
- struct wakeup_source *ws = (struct wakeup_source *)data;
+ struct wakeup_source *ws = from_timer(ws, t, timer);
unsigned long flags;
spin_lock_irqsave(&ws->lock, flags);
* becaue the HDA driver may require us to enable the audio power
* domain during system suspend.
*/
- pdev->dev_flags |= PCI_DEV_FLAGS_NEEDS_RESUME;
+ dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
ret = i915_driver_init_early(dev_priv, ent);
if (ret < 0)
* MEI requires to resume from runtime suspend mode
* in order to perform link reset flow upon system suspend.
*/
- pdev->dev_flags |= PCI_DEV_FLAGS_NEEDS_RESUME;
+ dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
/*
* ME maps runtime suspend/resume to D0i states,
* MEI requires to resume from runtime suspend mode
* in order to perform link reset flow upon system suspend.
*/
- pdev->dev_flags |= PCI_DEV_FLAGS_NEEDS_RESUME;
+ dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
/*
* TXE maps runtime suspend/resume to own power gating states,
if (drv && drv->pm && drv->pm->prepare) {
int error = drv->pm->prepare(dev);
- if (error)
+ if (error < 0)
return error;
+
+ if (!error && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE))
+ return 0;
}
return pci_dev_keep_suspended(to_pci_dev(dev));
}
if (!pm) {
pci_pm_default_suspend(pci_dev);
- goto Fixup;
+ return 0;
}
/*
- * PCI devices suspended at run time need to be resumed at this point,
- * because in general it is necessary to reconfigure them for system
- * suspend. Namely, if the device is supposed to wake up the system
- * from the sleep state, we may need to reconfigure it for this purpose.
- * In turn, if the device is not supposed to wake up the system from the
- * sleep state, we'll have to prevent it from signaling wake-up.
+ * PCI devices suspended at run time may need to be resumed at this
+ * point, because in general it may be necessary to reconfigure them for
+ * system suspend. Namely, if the device is expected to wake up the
+ * system from the sleep state, it may have to be reconfigured for this
+ * purpose, or if the device is not expected to wake up the system from
+ * the sleep state, it should be prevented from signaling wakeup events
+ * going forward.
+ *
+ * Also if the driver of the device does not indicate that its system
+ * suspend callbacks can cope with runtime-suspended devices, it is
+ * better to resume the device from runtime suspend here.
*/
- pm_runtime_resume(dev);
+ if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) ||
+ !pci_dev_keep_suspended(pci_dev))
+ pm_runtime_resume(dev);
pci_dev->state_saved = false;
if (pm->suspend) {
}
}
- Fixup:
- pci_fixup_device(pci_fixup_suspend, pci_dev);
-
return 0;
}
+static int pci_pm_suspend_late(struct device *dev)
+{
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ return 0;
+
+ pci_fixup_device(pci_fixup_suspend, to_pci_dev(dev));
+
+ return pm_generic_suspend_late(dev);
+}
+
static int pci_pm_suspend_noirq(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ return 0;
+
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_suspend_late(dev, PMSG_SUSPEND);
struct device_driver *drv = dev->driver;
int error = 0;
+ /*
+ * Devices with DPM_FLAG_SMART_SUSPEND may be left in runtime suspend
+ * during system suspend, so update their runtime PM status to "active"
+ * as they are going to be put into D0 shortly.
+ */
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ pm_runtime_set_active(dev);
+
pci_pm_default_resume_early(pci_dev);
if (pci_has_legacy_pm_support(pci_dev))
#else /* !CONFIG_SUSPEND */
#define pci_pm_suspend NULL
+#define pci_pm_suspend_late NULL
#define pci_pm_suspend_noirq NULL
#define pci_pm_resume NULL
#define pci_pm_resume_noirq NULL
* devices should not be touched during freeze/thaw transitions,
* however.
*/
- pm_runtime_resume(dev);
+ if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND))
+ pm_runtime_resume(dev);
pci_dev->state_saved = false;
if (pm->freeze) {
return error;
}
- if (pcibios_pm_ops.freeze)
- return pcibios_pm_ops.freeze(dev);
-
return 0;
}
+static int pci_pm_freeze_late(struct device *dev)
+{
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ return 0;
+
+ return pm_generic_freeze_late(dev);;
+}
+
static int pci_pm_freeze_noirq(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct device_driver *drv = dev->driver;
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ return 0;
+
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_suspend_late(dev, PMSG_FREEZE);
struct device_driver *drv = dev->driver;
int error = 0;
+ /*
+ * If the device is in runtime suspend, the code below may not work
+ * correctly with it, so skip that code and make the PM core skip all of
+ * the subsequent "thaw" callbacks for the device.
+ */
+ if (dev_pm_smart_suspend_and_suspended(dev)) {
+ dev->power.direct_complete = true;
+ return 0;
+ }
+
if (pcibios_pm_ops.thaw_noirq) {
error = pcibios_pm_ops.thaw_noirq(dev);
if (error)
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
int error = 0;
- if (pcibios_pm_ops.thaw) {
- error = pcibios_pm_ops.thaw(dev);
- if (error)
- return error;
- }
-
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume(dev);
if (!pm) {
pci_pm_default_suspend(pci_dev);
- goto Fixup;
+ return 0;
}
/* The reason to do that is the same as in pci_pm_suspend(). */
- pm_runtime_resume(dev);
+ if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) ||
+ !pci_dev_keep_suspended(pci_dev))
+ pm_runtime_resume(dev);
pci_dev->state_saved = false;
if (pm->poweroff) {
return error;
}
- Fixup:
- pci_fixup_device(pci_fixup_suspend, pci_dev);
+ return 0;
+}
- if (pcibios_pm_ops.poweroff)
- return pcibios_pm_ops.poweroff(dev);
+static int pci_pm_poweroff_late(struct device *dev)
+{
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ return 0;
- return 0;
+ pci_fixup_device(pci_fixup_suspend, to_pci_dev(dev));
+
+ return pm_generic_poweroff_late(dev);
}
static int pci_pm_poweroff_noirq(struct device *dev)
struct pci_dev *pci_dev = to_pci_dev(dev);
struct device_driver *drv = dev->driver;
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ return 0;
+
if (pci_has_legacy_pm_support(to_pci_dev(dev)))
return pci_legacy_suspend_late(dev, PMSG_HIBERNATE);
struct device_driver *drv = dev->driver;
int error = 0;
+ /* This is analogous to the pci_pm_resume_noirq() case. */
+ if (dev_pm_smart_suspend_and_suspended(dev))
+ pm_runtime_set_active(dev);
+
if (pcibios_pm_ops.restore_noirq) {
error = pcibios_pm_ops.restore_noirq(dev);
if (error)
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
int error = 0;
- if (pcibios_pm_ops.restore) {
- error = pcibios_pm_ops.restore(dev);
- if (error)
- return error;
- }
-
/*
* This is necessary for the hibernation error path in which restore is
* called without restoring the standard config registers of the device.
#else /* !CONFIG_HIBERNATE_CALLBACKS */
#define pci_pm_freeze NULL
+#define pci_pm_freeze_late NULL
#define pci_pm_freeze_noirq NULL
#define pci_pm_thaw NULL
#define pci_pm_thaw_noirq NULL
#define pci_pm_poweroff NULL
+#define pci_pm_poweroff_late NULL
#define pci_pm_poweroff_noirq NULL
#define pci_pm_restore NULL
#define pci_pm_restore_noirq NULL
.prepare = pci_pm_prepare,
.complete = pci_pm_complete,
.suspend = pci_pm_suspend,
+ .suspend_late = pci_pm_suspend_late,
.resume = pci_pm_resume,
.freeze = pci_pm_freeze,
+ .freeze_late = pci_pm_freeze_late,
.thaw = pci_pm_thaw,
.poweroff = pci_pm_poweroff,
+ .poweroff_late = pci_pm_poweroff_late,
.restore = pci_pm_restore,
.suspend_noirq = pci_pm_suspend_noirq,
.resume_noirq = pci_pm_resume_noirq,
if (!pm_runtime_suspended(dev)
|| pci_target_state(pci_dev, wakeup) != pci_dev->current_state
- || platform_pci_need_resume(pci_dev)
- || (pci_dev->dev_flags & PCI_DEV_FLAGS_NEEDS_RESUME))
+ || platform_pci_need_resume(pci_dev))
return false;
/*
int acpi_subsys_prepare(struct device *dev);
void acpi_subsys_complete(struct device *dev);
int acpi_subsys_suspend_late(struct device *dev);
+int acpi_subsys_suspend_noirq(struct device *dev);
+int acpi_subsys_resume_noirq(struct device *dev);
int acpi_subsys_resume_early(struct device *dev);
int acpi_subsys_suspend(struct device *dev);
int acpi_subsys_freeze(struct device *dev);
+int acpi_subsys_freeze_late(struct device *dev);
+int acpi_subsys_freeze_noirq(struct device *dev);
+int acpi_subsys_thaw_noirq(struct device *dev);
#else
static inline int acpi_dev_resume_early(struct device *dev) { return 0; }
static inline int acpi_subsys_prepare(struct device *dev) { return 0; }
static inline void acpi_subsys_complete(struct device *dev) {}
static inline int acpi_subsys_suspend_late(struct device *dev) { return 0; }
+static inline int acpi_subsys_suspend_noirq(struct device *dev) { return 0; }
+static inline int acpi_subsys_resume_noirq(struct device *dev) { return 0; }
static inline int acpi_subsys_resume_early(struct device *dev) { return 0; }
static inline int acpi_subsys_suspend(struct device *dev) { return 0; }
static inline int acpi_subsys_freeze(struct device *dev) { return 0; }
+static inline int acpi_subsys_freeze_late(struct device *dev) { return 0; }
+static inline int acpi_subsys_freeze_noirq(struct device *dev) { return 0; }
+static inline int acpi_subsys_thaw_noirq(struct device *dev) { return 0; }
#endif
#ifdef CONFIG_ACPI
* @devnode: Callback to provide the devtmpfs.
* @class_release: Called to release this class.
* @dev_release: Called to release the device.
- * @suspend: Used to put the device to sleep mode, usually to a low power
- * state.
- * @resume: Used to bring the device from the sleep mode.
* @shutdown_pre: Called at shut-down time before driver shutdown.
* @ns_type: Callbacks so sysfs can detemine namespaces.
* @namespace: Namespace of the device belongs to this class.
void (*class_release)(struct class *class);
void (*dev_release)(struct device *dev);
- int (*suspend)(struct device *dev, pm_message_t state);
- int (*resume)(struct device *dev);
int (*shutdown_pre)(struct device *dev);
const struct kobj_ns_type_operations *ns_type;
#endif
}
+static inline void dev_pm_set_driver_flags(struct device *dev, u32 flags)
+{
+ dev->power.driver_flags = flags;
+}
+
+static inline bool dev_pm_test_driver_flags(struct device *dev, u32 flags)
+{
+ return !!(dev->power.driver_flags & flags);
+}
+
static inline void device_lock(struct device *dev)
{
mutex_lock(&dev->mutex);
PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT = (__force pci_dev_flags_t) (1 << 9),
/* Do not use FLR even if device advertises PCI_AF_CAP */
PCI_DEV_FLAGS_NO_FLR_RESET = (__force pci_dev_flags_t) (1 << 10),
- /*
- * Resume before calling the driver's system suspend hooks, disabling
- * the direct_complete optimization.
- */
- PCI_DEV_FLAGS_NEEDS_RESUME = (__force pci_dev_flags_t) (1 << 11),
/* Don't use Relaxed Ordering for TLPs directed at this device */
- PCI_DEV_FLAGS_NO_RELAXED_ORDERING = (__force pci_dev_flags_t) (1 << 12),
+ PCI_DEV_FLAGS_NO_RELAXED_ORDERING = (__force pci_dev_flags_t) (1 << 11),
};
enum pci_irq_reroute_variant {
#endif
};
+/*
+ * Driver flags to control system suspend/resume behavior.
+ *
+ * These flags can be set by device drivers at the probe time. They need not be
+ * cleared by the drivers as the driver core will take care of that.
+ *
+ * NEVER_SKIP: Do not skip system suspend/resume callbacks for the device.
+ * SMART_PREPARE: Check the return value of the driver's ->prepare callback.
+ * SMART_SUSPEND: No need to resume the device from runtime suspend.
+ *
+ * Setting SMART_PREPARE instructs bus types and PM domains which may want
+ * system suspend/resume callbacks to be skipped for the device to return 0 from
+ * their ->prepare callbacks if the driver's ->prepare callback returns 0 (in
+ * other words, the system suspend/resume callbacks can only be skipped for the
+ * device if its driver doesn't object against that). This flag has no effect
+ * if NEVER_SKIP is set.
+ *
+ * Setting SMART_SUSPEND instructs bus types and PM domains which may want to
+ * runtime resume the device upfront during system suspend that doing so is not
+ * necessary from the driver's perspective. It also may cause them to skip
+ * invocations of the ->suspend_late and ->suspend_noirq callbacks provided by
+ * the driver if they decide to leave the device in runtime suspend.
+ */
+#define DPM_FLAG_NEVER_SKIP BIT(0)
+#define DPM_FLAG_SMART_PREPARE BIT(1)
+#define DPM_FLAG_SMART_SUSPEND BIT(2)
+
struct dev_pm_info {
pm_message_t power_state;
unsigned int can_wakeup:1;
bool is_late_suspended:1;
bool early_init:1; /* Owned by the PM core */
bool direct_complete:1; /* Owned by the PM core */
+ u32 driver_flags;
spinlock_t lock;
#ifdef CONFIG_PM_SLEEP
struct list_head entry;
extern int pm_generic_poweroff(struct device *dev);
extern void pm_generic_complete(struct device *dev);
+extern bool dev_pm_smart_suspend_and_suspended(struct device *dev);
+
#else /* !CONFIG_PM_SLEEP */
#define device_pm_lock() do {} while (0)