ASoC: Intel: sof-rt5682: add MCLK support for BYT platform

The sof-rt5682 machine driver currently uses BCLK on BYT/Minnowboard
platform. The MCLK signal is available since the Turbot revision, so
enable MCLK on BYT/Minnowboard Turbot platform.

Signed-off-by: Xun Zhang <xun2.zhang@intel.com>
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c
index e2e5f97..f3d481b 100644 (file)
--- a/sound/soc/intel/boards/sof_rt5682.c
+++ b/sound/soc/intel/boards/sof_rt5682.c
@@ -9,6 +9,7 @@
 #include <linux/input.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 #include <linux/dmi.h>
 #include <sound/core.h>
 #include <sound/jack.h>
@@ -32,6 +33,7 @@
 #define SOF_RT5682_SSP_AMP_MASK                 (GENMASK(8, 6))
 #define SOF_RT5682_SSP_AMP(quirk)      \
        (((quirk) << SOF_RT5682_SSP_AMP_SHIFT) & SOF_RT5682_SSP_AMP_MASK)
+#define SOF_RT5682_MCLK_BYTCHT_EN              BIT(9)
 
 /* Default: MCLK on, MCLK 19.2M, SSP0  */
 static unsigned long sof_rt5682_quirk = SOF_RT5682_MCLK_EN |
@@ -48,6 +50,7 @@ struct sof_hdmi_pcm {
 };
 
 struct sof_card_private {
+       struct clk *mclk;
        struct snd_soc_jack sof_headset;
        struct list_head hdmi_pcm_list;
 };
@@ -62,6 +65,22 @@ static const struct dmi_system_id sof_rt5682_quirk_table[] = {
        {
                .callback = sof_rt5682_quirk_cb,
                .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max"),
+               },
+               .driver_data = (void *)(SOF_RT5682_SSP_CODEC(2)),
+       },
+       {
+               .callback = sof_rt5682_quirk_cb,
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "AAEON"),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "UP-CHT01"),
+               },
+               .driver_data = (void *)(SOF_RT5682_SSP_CODEC(2)),
+       },
+       {
+               .callback = sof_rt5682_quirk_cb,
+               .matches = {
                        DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
                        DMI_MATCH(DMI_PRODUCT_NAME, "WhiskeyLake Client"),
                },
@@ -127,6 +146,27 @@ static int sof_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
                                        RT5682_CLK_SEL_I2S1_ASRC);
        }
 
+       if (sof_rt5682_quirk & SOF_RT5682_MCLK_BYTCHT_EN) {
+               /*
+                * The firmware might enable the clock at
+                * boot (this information may or may not
+                * be reflected in the enable clock register).
+                * To change the rate we must disable the clock
+                * first to cover these cases. Due to common
+                * clock framework restrictions that do not allow
+                * to disable a clock that has not been enabled,
+                * we need to enable the clock first.
+                */
+               ret = clk_prepare_enable(ctx->mclk);
+               if (!ret)
+                       clk_disable_unprepare(ctx->mclk);
+
+               ret = clk_set_rate(ctx->mclk, 19200000);
+
+               if (ret)
+                       dev_err(rtd->dev, "unable to set MCLK rate\n");
+       }
+
        /*
         * Headset buttons map to the google Reference headset.
         * These can be configured by userspace.
@@ -161,10 +201,20 @@ static int sof_rt5682_hw_params(struct snd_pcm_substream *substream,
                                struct snd_pcm_hw_params *params)
 {
        struct snd_soc_pcm_runtime *rtd = substream->private_data;
+       struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
        struct snd_soc_dai *codec_dai = rtd->codec_dai;
        int clk_id, clk_freq, pll_out, ret;
 
        if (sof_rt5682_quirk & SOF_RT5682_MCLK_EN) {
+               if (sof_rt5682_quirk & SOF_RT5682_MCLK_BYTCHT_EN) {
+                       ret = clk_prepare_enable(ctx->mclk);
+                       if (ret < 0) {
+                               dev_err(rtd->dev,
+                                       "could not configure MCLK state");
+                               return ret;
+                       }
+               }
+
                clk_id = RT5682_PLL1_S_MCLK;
                if (sof_rt5682_quirk & SOF_RT5682_MCLK_24MHZ)
                        clk_freq = 24000000;
@@ -507,7 +557,9 @@ static int sof_audio_probe(struct platform_device *pdev)
                dmic_num = 0;
                hdmi_num = 0;
                /* default quirk for legacy cpu */
-               sof_rt5682_quirk = SOF_RT5682_SSP_CODEC(2);
+               sof_rt5682_quirk = SOF_RT5682_MCLK_EN |
+                                               SOF_RT5682_MCLK_BYTCHT_EN |
+                                               SOF_RT5682_SSP_CODEC(2);
        } else {
                dmic_num = 1;
                hdmi_num = 3;
@@ -515,6 +567,17 @@ static int sof_audio_probe(struct platform_device *pdev)
 
        dmi_check_system(sof_rt5682_quirk_table);
 
+       /* need to get main clock from pmc */
+       if (sof_rt5682_quirk & SOF_RT5682_MCLK_BYTCHT_EN) {
+               ctx->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+               ret = clk_prepare_enable(ctx->mclk);
+               if (ret < 0) {
+                       dev_err(&pdev->dev,
+                               "could not configure MCLK state");
+                       return ret;
+               }
+       }
+
        dev_dbg(&pdev->dev, "sof_rt5682_quirk = %lx\n", sof_rt5682_quirk);
 
        ssp_amp = (sof_rt5682_quirk & SOF_RT5682_SSP_AMP_MASK) >>