serial: 8250: Add Quark X1000 to 8250_pci.c

Quark X1000 contains two designware derived 8250 serial ports.
Each port has a unique PCI configuration space consisting of
BAR0:UART BAR1:DMA respectively.

Unlike the standard 8250 the register width is 32 bits for RHR,IER etc
The Quark UART has a fundamental clock @ 44.2368 MHz allowing for a
bitrate of up to about 2.76 megabits per second.

This patch enables standard 8250 mode

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 61830b1792ebfcf17acc8063a4a8a01a6f79a20a..14d3e6be880010575d56a888494463d1702a27f4 100644 (file)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1788,6 +1788,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_COMMTECH_4222PCIE        0x0022
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
 #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
+#define PCI_DEVICE_ID_INTEL_QRK_UART   0x0936
 
 #define PCI_VENDOR_ID_SUNIX            0x1fd4
 #define PCI_DEVICE_ID_SUNIX_1999       0x1999
@@ -1898,6 +1899,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
                .subdevice      = PCI_ANY_ID,
                .setup          = byt_serial_setup,
        },
+       {
+               .vendor         = PCI_VENDOR_ID_INTEL,
+               .device         = PCI_DEVICE_ID_INTEL_QRK_UART,
+               .subvendor      = PCI_ANY_ID,
+               .subdevice      = PCI_ANY_ID,
+               .setup          = pci_default_setup,
+       },
        /*
         * ITE
         */
@@ -2740,6 +2748,7 @@ enum pci_board_num_t {
        pbn_ADDIDATA_PCIe_8_3906250,
        pbn_ce4100_1_115200,
        pbn_byt,
+       pbn_qrk,
        pbn_omegapci,
        pbn_NETMOS9900_2s_115200,
        pbn_brcm_trumanage,
@@ -3490,6 +3499,12 @@ static struct pciserial_board pci_boards[] = {
                .uart_offset    = 0x80,
                .reg_shift      = 2,
        },
+       [pbn_qrk] = {
+               .flags          = FL_BASE0,
+               .num_ports      = 1,
+               .base_baud      = 2764800,
+               .reg_shift      = 2,
+       },
        [pbn_omegapci] = {
                .flags          = FL_BASE0,
                .num_ports      = 8,
@@ -5191,6 +5206,12 @@ static struct pci_device_id serial_pci_tbl[] = {
                PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
                pbn_byt },
 
+       /*
+        * Intel Quark x1000
+        */
+       {       PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART,
+               PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+               pbn_qrk },
        /*
         * Cronyx Omega PCI
         */