serial: mxs-auart: Allow device tree probing

Allow device tree probing.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: <linux-serial@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Subodh Nijsure <snijsure@grid-net.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
new file mode 100644 (file)
index 0000000..2ee903f
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
@@ -0,0 +1,27 @@
+* Freescale MXS Application UART (AUART)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
+  imx23 and imx28.
+- reg : Address and length of the register set for the device
+- interrupts : Should contain the auart interrupt numbers
+
+Example:
+auart0: serial@8006a000 {
+       compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+       reg = <0x8006a000 0x2000>;
+       interrupts = <112 70 71>;
+};
+
+Note: Each auart port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+       serial0 = &auart0;
+       serial1 = &auart1;
+       serial2 = &auart2;
+       serial3 = &auart3;
+       serial4 = &auart4;
+};

diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index ec56d83..2e341b8 100644 (file)
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -33,6 +33,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/of_device.h>
 
 #include <asm/cacheflush.h>
 
@@ -675,6 +676,30 @@ static struct uart_driver auart_driver = {
 #endif
 };
 
+/*
+ * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it
+ * could successfully get all information from dt or a negative errno.
+ */
+static int serial_mxs_probe_dt(struct mxs_auart_port *s,
+               struct platform_device *pdev)
+{
+       struct device_node *np = pdev->dev.of_node;
+       int ret;
+
+       if (!np)
+               /* no device tree device */
+               return 1;
+
+       ret = of_alias_get_id(np, "serial");
+       if (ret < 0) {
+               dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
+               return ret;
+       }
+       s->port.line = ret;
+
+       return 0;
+}
+
 static int __devinit mxs_auart_probe(struct platform_device *pdev)
 {
        struct mxs_auart_port *s;
@@ -689,6 +714,12 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
                goto out;
        }
 
+       ret = serial_mxs_probe_dt(s, pdev);
+       if (ret > 0)
+               s->port.line = pdev->id < 0 ? 0 : pdev->id;
+       else if (ret < 0)
+               goto out_free;
+
        pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
        if (IS_ERR(pinctrl)) {
                ret = PTR_ERR(pinctrl);
@@ -711,7 +742,6 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
        s->port.membase = ioremap(r->start, resource_size(r));
        s->port.ops = &mxs_auart_ops;
        s->port.iotype = UPIO_MEM;
-       s->port.line = pdev->id < 0 ? 0 : pdev->id;
        s->port.fifosize = 16;
        s->port.uartclk = clk_get_rate(s->clk);
        s->port.type = PORT_IMX;
@@ -728,7 +758,7 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
 
        platform_set_drvdata(pdev, s);
 
-       auart_port[pdev->id] = s;
+       auart_port[s->port.line] = s;
 
        mxs_auart_reset(&s->port);
 
@@ -769,12 +799,19 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev)
        return 0;
 }
 
+static struct of_device_id mxs_auart_dt_ids[] = {
+       { .compatible = "fsl,imx23-auart", },
+       { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
+
 static struct platform_driver mxs_auart_driver = {
        .probe = mxs_auart_probe,
        .remove = __devexit_p(mxs_auart_remove),
        .driver = {
                .name = "mxs-auart",
                .owner = THIS_MODULE,
+               .of_match_table = mxs_auart_dt_ids,
        },
 };
 
@@ -807,3 +844,4 @@ module_init(mxs_auart_init);
 module_exit(mxs_auart_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Freescale MXS application uart driver");
+MODULE_ALIAS("platform:mxs-auart");