[media] cxd2820r: use Kernel GPIO for GPIO access
authorAntti Palosaari <crope@iki.fi>
Fri, 20 Jul 2012 00:10:36 +0000 (21:10 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Thu, 27 Sep 2012 17:33:58 +0000 (14:33 -0300)
Currently there is LNA behind cxd2820r demodulator GPIO. Use
Kernel GPIO interface to access those GPIOs.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb-frontends/cxd2820r.h
drivers/media/dvb-frontends/cxd2820r_c.c
drivers/media/dvb-frontends/cxd2820r_core.c
drivers/media/dvb-frontends/cxd2820r_priv.h
drivers/media/dvb-frontends/cxd2820r_t.c
drivers/media/dvb-frontends/cxd2820r_t2.c
drivers/media/usb/dvb-usb-v2/anysee.c
drivers/media/usb/em28xx/em28xx-dvb.c

index 5aa306e..6acc21c 100644 (file)
@@ -62,14 +62,6 @@ struct cxd2820r_config {
         * Values: 0, 1
         */
        bool spec_inv;
-
-       /* GPIOs for all used modes.
-        * Default: none, disabled
-        * Values: <see above>
-        */
-       u8 gpio_dvbt[3];
-       u8 gpio_dvbt2[3];
-       u8 gpio_dvbc[3];
 };
 
 
@@ -77,12 +69,14 @@ struct cxd2820r_config {
        (defined(CONFIG_DVB_CXD2820R_MODULE) && defined(MODULE))
 extern struct dvb_frontend *cxd2820r_attach(
        const struct cxd2820r_config *config,
-       struct i2c_adapter *i2c
+       struct i2c_adapter *i2c,
+       int *gpio_chip_base
 );
 #else
 static inline struct dvb_frontend *cxd2820r_attach(
        const struct cxd2820r_config *config,
-       struct i2c_adapter *i2c
+       struct i2c_adapter *i2c,
+       int *gpio_chip_base
 )
 {
        printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
index d2a0c28..125a440 100644 (file)
@@ -50,11 +50,6 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe)
        dev_dbg(&priv->i2c->dev, "%s: frequency=%d symbol_rate=%d\n", __func__,
                        c->frequency, c->symbol_rate);
 
-       /* update GPIOs */
-       ret = cxd2820r_gpio(fe);
-       if (ret)
-               goto error;
-
        /* program tuner */
        if (fe->ops.tuner_ops.set_params)
                fe->ops.tuner_ops.set_params(fe);
index a3656ba..4bd42f2 100644 (file)
@@ -168,30 +168,15 @@ int cxd2820r_wr_reg_mask(struct cxd2820r_priv *priv, u32 reg, u8 val,
        return cxd2820r_wr_reg(priv, reg, val);
 }
 
-int cxd2820r_gpio(struct dvb_frontend *fe)
+int cxd2820r_gpio(struct dvb_frontend *fe, u8 *gpio)
 {
        struct cxd2820r_priv *priv = fe->demodulator_priv;
        int ret, i;
-       u8 *gpio, tmp0, tmp1;
+       u8 tmp0, tmp1;
 
        dev_dbg(&priv->i2c->dev, "%s: delsys=%d\n", __func__,
                        fe->dtv_property_cache.delivery_system);
 
-       switch (fe->dtv_property_cache.delivery_system) {
-       case SYS_DVBT:
-               gpio = priv->cfg.gpio_dvbt;
-               break;
-       case SYS_DVBT2:
-               gpio = priv->cfg.gpio_dvbt2;
-               break;
-       case SYS_DVBC_ANNEX_AC:
-               gpio = priv->cfg.gpio_dvbc;
-               break;
-       default:
-               ret = -EINVAL;
-               goto error;
-       }
-
        /* update GPIOs only when needed */
        if (!memcmp(gpio, priv->gpio, sizeof(priv->gpio)))
                return 0;
@@ -582,9 +567,19 @@ static int cxd2820r_get_frontend_algo(struct dvb_frontend *fe)
 static void cxd2820r_release(struct dvb_frontend *fe)
 {
        struct cxd2820r_priv *priv = fe->demodulator_priv;
+       int ret;
 
        dev_dbg(&priv->i2c->dev, "%s\n", __func__);
 
+#ifdef CONFIG_GPIOLIB
+       /* remove GPIOs */
+       if (priv->gpio_chip.label) {
+               ret = gpiochip_remove(&priv->gpio_chip);
+               if (ret)
+                       dev_err(&priv->i2c->dev, "%s: gpiochip_remove() " \
+                                       "failed=%d\n", KBUILD_MODNAME, ret);
+       }
+#endif
        kfree(priv);
        return;
 }
@@ -599,6 +594,49 @@ static int cxd2820r_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
        return cxd2820r_wr_reg_mask(priv, 0xdb, enable ? 1 : 0, 0x1);
 }
 
+#ifdef CONFIG_GPIOLIB
+static int cxd2820r_gpio_direction_output(struct gpio_chip *chip, unsigned nr,
+               int val)
+{
+       struct cxd2820r_priv *priv =
+                       container_of(chip, struct cxd2820r_priv, gpio_chip);
+       u8 gpio[GPIO_COUNT];
+
+       dev_dbg(&priv->i2c->dev, "%s: nr=%d val=%d\n", __func__, nr, val);
+
+       memcpy(gpio, priv->gpio, sizeof(gpio));
+       gpio[nr] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | (val << 2);
+
+       return cxd2820r_gpio(&priv->fe, gpio);
+}
+
+static void cxd2820r_gpio_set(struct gpio_chip *chip, unsigned nr, int val)
+{
+       struct cxd2820r_priv *priv =
+                       container_of(chip, struct cxd2820r_priv, gpio_chip);
+       u8 gpio[GPIO_COUNT];
+
+       dev_dbg(&priv->i2c->dev, "%s: nr=%d val=%d\n", __func__, nr, val);
+
+       memcpy(gpio, priv->gpio, sizeof(gpio));
+       gpio[nr] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | (val << 2);
+
+       (void) cxd2820r_gpio(&priv->fe, gpio);
+
+       return;
+}
+
+static int cxd2820r_gpio_get(struct gpio_chip *chip, unsigned nr)
+{
+       struct cxd2820r_priv *priv =
+                       container_of(chip, struct cxd2820r_priv, gpio_chip);
+
+       dev_dbg(&priv->i2c->dev, "%s: nr=%d\n", __func__, nr);
+
+       return (priv->gpio[nr] >> 2) & 0x01;
+}
+#endif
+
 static const struct dvb_frontend_ops cxd2820r_ops = {
        .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
        /* default: DVB-T/T2 */
@@ -645,15 +683,20 @@ static const struct dvb_frontend_ops cxd2820r_ops = {
 };
 
 struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg,
-               struct i2c_adapter *i2c)
+               struct i2c_adapter *i2c, int *gpio_chip_base
+)
 {
-       struct cxd2820r_priv *priv = NULL;
+       struct cxd2820r_priv *priv;
        int ret;
        u8 tmp;
 
        priv = kzalloc(sizeof (struct cxd2820r_priv), GFP_KERNEL);
-       if (!priv)
+       if (!priv) {
+               ret = -ENOMEM;
+               dev_err(&i2c->dev, "%s: kzalloc() failed\n",
+                               KBUILD_MODNAME);
                goto error;
+       }
 
        priv->i2c = i2c;
        memcpy(&priv->cfg, cfg, sizeof (struct cxd2820r_config));
@@ -664,10 +707,35 @@ struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg,
        if (ret || tmp != 0xe1)
                goto error;
 
+#ifdef CONFIG_GPIOLIB
+       /* add GPIOs */
+       if (gpio_chip_base) {
+               priv->gpio_chip.label = KBUILD_MODNAME;
+               priv->gpio_chip.dev = &priv->i2c->dev;
+               priv->gpio_chip.owner = THIS_MODULE;
+               priv->gpio_chip.direction_output =
+                               cxd2820r_gpio_direction_output;
+               priv->gpio_chip.set = cxd2820r_gpio_set;
+               priv->gpio_chip.get = cxd2820r_gpio_get;
+               priv->gpio_chip.base = -1; /* dynamic allocation */
+               priv->gpio_chip.ngpio = GPIO_COUNT;
+               priv->gpio_chip.can_sleep = 1;
+               ret = gpiochip_add(&priv->gpio_chip);
+               if (ret)
+                       goto error;
+
+               dev_dbg(&priv->i2c->dev, "%s: gpio_chip.base=%d\n", __func__,
+                               priv->gpio_chip.base);
+
+               *gpio_chip_base = priv->gpio_chip.base;
+       }
+#endif
+
        memcpy(&priv->fe.ops, &cxd2820r_ops, sizeof (struct dvb_frontend_ops));
        priv->fe.demodulator_priv = priv;
        return &priv->fe;
 error:
+       dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret);
        kfree(priv);
        return NULL;
 }
index 9396492..7ff5f60 100644 (file)
@@ -26,6 +26,7 @@
 #include "dvb_frontend.h"
 #include "dvb_math.h"
 #include "cxd2820r.h"
+#include <linux/gpio.h>
 
 struct reg_val_mask {
        u32 reg;
@@ -41,7 +42,11 @@ struct cxd2820r_priv {
        bool ber_running;
 
        u8 bank[2];
-       u8 gpio[3];
+#define GPIO_COUNT 3
+       u8 gpio[GPIO_COUNT];
+#ifdef CONFIG_GPIOLIB
+       struct gpio_chip gpio_chip;
+#endif
 
        fe_delivery_system_t delivery_system;
        bool last_tune_failed; /* for switch between T and T2 tune */
@@ -51,7 +56,7 @@ struct cxd2820r_priv {
 
 extern int cxd2820r_debug;
 
-int cxd2820r_gpio(struct dvb_frontend *fe);
+int cxd2820r_gpio(struct dvb_frontend *fe, u8 *gpio);
 
 int cxd2820r_wr_reg_mask(struct cxd2820r_priv *priv, u32 reg, u8 val,
        u8 mask);
index af5890e..fa184ca 100644 (file)
@@ -74,11 +74,6 @@ int cxd2820r_set_frontend_t(struct dvb_frontend *fe)
                return -EINVAL;
        }
 
-       /* update GPIOs */
-       ret = cxd2820r_gpio(fe);
-       if (ret)
-               goto error;
-
        /* program tuner */
        if (fe->ops.tuner_ops.set_params)
                fe->ops.tuner_ops.set_params(fe);
index 653c56e..e82d82a 100644 (file)
@@ -92,11 +92,6 @@ int cxd2820r_set_frontend_t2(struct dvb_frontend *fe)
                return -EINVAL;
        }
 
-       /* update GPIOs */
-       ret = cxd2820r_gpio(fe);
-       if (ret)
-               goto error;
-
        /* program tuner */
        if (fe->ops.tuner_ops.set_params)
                fe->ops.tuner_ops.set_params(fe);
index b430bca..6705d81 100644 (file)
@@ -874,7 +874,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 
                /* attach demod */
                adap->fe[0] = dvb_attach(cxd2820r_attach,
-                               &anysee_cxd2820r_config, &d->i2c_adap);
+                               &anysee_cxd2820r_config, &d->i2c_adap, NULL);
 
                state->has_ci = true;
 
index a16531f..34c5ea9 100644 (file)
@@ -28,6 +28,7 @@
 #include <media/videobuf-vmalloc.h>
 #include <media/tuner.h>
 #include "tuner-simple.h"
+#include <linux/gpio.h>
 
 #include "lgdt330x.h"
 #include "lgdt3305.h"
@@ -610,11 +611,6 @@ static struct tda10023_config em28xx_tda10023_config = {
 static struct cxd2820r_config em28xx_cxd2820r_config = {
        .i2c_address = (0xd8 >> 1),
        .ts_mode = CXD2820R_TS_SERIAL,
-
-       /* enable LNA for DVB-T, DVB-T2 and DVB-C */
-       .gpio_dvbt[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L,
-       .gpio_dvbt2[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L,
-       .gpio_dvbc[0] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | CXD2820R_GPIO_L,
 };
 
 static struct tda18271_config em28xx_cxd2820r_tda18271_config = {
@@ -813,7 +809,7 @@ static void em28xx_unregister_dvb(struct em28xx_dvb *dvb)
 
 static int em28xx_dvb_init(struct em28xx *dev)
 {
-       int result = 0, mfe_shared = 0;
+       int result = 0, mfe_shared = 0, gpio_chip_base;
        struct em28xx_dvb *dvb;
 
        if (!dev->board.has_dvb) {
@@ -961,7 +957,8 @@ static int em28xx_dvb_init(struct em28xx *dev)
        case EM28174_BOARD_PCTV_290E:
                dvb->fe[0] = dvb_attach(cxd2820r_attach,
                                        &em28xx_cxd2820r_config,
-                                       &dev->i2c_adap);
+                                       &dev->i2c_adap,
+                                       &gpio_chip_base);
                if (dvb->fe[0]) {
                        /* FE 0 attach tuner */
                        if (!dvb_attach(tda18271_attach,
@@ -975,6 +972,16 @@ static int em28xx_dvb_init(struct em28xx *dev)
                                goto out_free;
                        }
                }
+
+               /* enable LNA for DVB-T, DVB-T2 and DVB-C */
+               result = gpio_request_one(gpio_chip_base, GPIOF_INIT_LOW,
+                               "LNA");
+               if (result)
+                       em28xx_errdev("gpio request failed %d\n", result);
+               else
+                       gpio_free(gpio_chip_base);
+
+               result = 0; /* continue even set LNA fails */
                break;
        case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
        {