[PATCH] ppc64: Fix result code handling in prom_init

prom_init(), the trampoline code that "talks" to Open Firmware during
early boot, has various issues with managing OF result codes. Some of my
recent fixups in fact made the problem worse on some platforms.

This patch reworks it all. Tested on g5, Maple, POWER3 and POWER5.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c
index 3de950d..1ac531b 100644 (file)
--- a/arch/ppc64/kernel/prom_init.c
+++ b/arch/ppc64/kernel/prom_init.c
@@ -211,13 +211,23 @@ struct {
  */
 #define ADDR(x)                (u32) ((unsigned long)(x) - offset)
 
+/*
+ * Error results ... some OF calls will return "-1" on error, some
+ * will return 0, some will return either. To simplify, here are
+ * macros to use with any ihandle or phandle return value to check if
+ * it is valid
+ */
+
+#define PROM_ERROR             (-1u)
+#define PHANDLE_VALID(p)       ((p) != 0 && (p) != PROM_ERROR)
+#define IHANDLE_VALID(i)       ((i) != 0 && (i) != PROM_ERROR)
+
+
 /* This is the one and *ONLY* place where we actually call open
  * firmware from, since we need to make sure we're running in 32b
  * mode when we do.  We switch back to 64b mode upon return.
  */
 
-#define PROM_ERROR     (-1)
-
 static int __init call_prom(const char *service, int nargs, int nret, ...)
 {
        int i;
@@ -587,14 +597,13 @@ static void __init prom_send_capabilities(void)
 {
        unsigned long offset = reloc_offset();
        ihandle elfloader;
-       int ret;
 
        elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
        if (elfloader == 0) {
                prom_printf("couldn't open /packages/elf-loader\n");
                return;
        }
-       ret = call_prom("call-method", 3, 1, ADDR("process-elf-header"),
+       call_prom("call-method", 3, 1, ADDR("process-elf-header"),
                        elfloader, ADDR(&fake_elf));
        call_prom("close", 1, 0, elfloader);
 }
@@ -646,7 +655,7 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align)
            base = _ALIGN_UP(base + 0x100000, align)) {
                prom_debug("    trying: 0x%x\n\r", base);
                addr = (unsigned long)prom_claim(base, size, 0);
-               if ((int)addr != PROM_ERROR)
+               if (addr != PROM_ERROR)
                        break;
                addr = 0;
                if (align == 0)
@@ -708,7 +717,7 @@ static unsigned long __init alloc_down(unsigned long size, unsigned long align,
        for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align))  {
                prom_debug("    trying: 0x%x\n\r", base);
                addr = (unsigned long)prom_claim(base, size, 0);
-               if ((int)addr != PROM_ERROR)
+               if (addr != PROM_ERROR)
                        break;
                addr = 0;
        }
@@ -902,18 +911,19 @@ static void __init prom_instantiate_rtas(void)
 {
        unsigned long offset = reloc_offset();
        struct prom_t *_prom = PTRRELOC(&prom);
-       phandle prom_rtas, rtas_node;
+       phandle rtas_node;
+       ihandle rtas_inst;
        u32 base, entry = 0;
        u32 size = 0;
 
        prom_debug("prom_instantiate_rtas: start...\n");
 
-       prom_rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
-       prom_debug("prom_rtas: %x\n", prom_rtas);
-       if (prom_rtas == (phandle) -1)
+       rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas"));
+       prom_debug("rtas_node: %x\n", rtas_node);
+       if (!PHANDLE_VALID(rtas_node))
                return;
 
-       prom_getprop(prom_rtas, "rtas-size", &size, sizeof(size));
+       prom_getprop(rtas_node, "rtas-size", &size, sizeof(size));
        if (size == 0)
                return;
 
@@ -922,14 +932,18 @@ static void __init prom_instantiate_rtas(void)
                prom_printf("RTAS allocation failed !\n");
                return;
        }
-       prom_printf("instantiating rtas at 0x%x", base);
 
-       rtas_node = call_prom("open", 1, 1, ADDR("/rtas"));
-       prom_printf("...");
+       rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
+       if (!IHANDLE_VALID(rtas_inst)) {
+               prom_printf("opening rtas package failed");
+               return;
+       }
+
+       prom_printf("instantiating rtas at 0x%x ...", base);
 
        if (call_prom("call-method", 3, 2,
                      ADDR("instantiate-rtas"),
-                     rtas_node, base) != PROM_ERROR) {
+                     rtas_inst, base) != PROM_ERROR) {
                entry = (long)_prom->args.rets[1];
        }
        if (entry == 0) {
@@ -940,8 +954,8 @@ static void __init prom_instantiate_rtas(void)
 
        reserve_mem(base, size);
 
-       prom_setprop(prom_rtas, "linux,rtas-base", &base, sizeof(base));
-       prom_setprop(prom_rtas, "linux,rtas-entry", &entry, sizeof(entry));
+       prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base));
+       prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry));
 
        prom_debug("rtas base     = 0x%x\n", base);
        prom_debug("rtas entry    = 0x%x\n", entry);
@@ -1062,7 +1076,7 @@ static void __init prom_initialize_tce_table(void)
 
                prom_printf("opening PHB %s", path);
                phb_node = call_prom("open", 1, 1, path);
-               if ( (long)phb_node <= 0)
+               if (phb_node == 0)
                        prom_printf("... failed\n");
                else
                        prom_printf("... done\n");
@@ -1279,12 +1293,12 @@ static void __init prom_init_client_services(unsigned long pp)
 
        /* get a handle for the stdout device */
        _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen"));
-       if ((long)_prom->chosen <= 0)
+       if (!PHANDLE_VALID(_prom->chosen))
                prom_panic("cannot find chosen"); /* msg won't be printed :( */
 
        /* get device tree root */
        _prom->root = call_prom("finddevice", 1, 1, ADDR("/"));
-       if ((long)_prom->root <= 0)
+       if (!PHANDLE_VALID(_prom->root))
                prom_panic("cannot find device tree root"); /* msg won't be printed :( */
 }
 
@@ -1356,9 +1370,8 @@ static int __init prom_find_machine_type(void)
        }
        /* Default to pSeries. We need to know if we are running LPAR */
        rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
-       if (rtas != (phandle) -1) {
-               unsigned long x;
-               x = prom_getproplen(rtas, "ibm,hypertas-functions");
+       if (!PHANDLE_VALID(rtas)) {
+               int x = prom_getproplen(rtas, "ibm,hypertas-functions");
                if (x != PROM_ERROR) {
                        prom_printf("Hypertas detected, assuming LPAR !\n");
                        return PLATFORM_PSERIES_LPAR;
@@ -1426,12 +1439,13 @@ static void __init prom_check_displays(void)
                 * leave some room at the end of the path for appending extra
                 * arguments
                 */
-               if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) < 0)
+               if (call_prom("package-to-path", 3, 1, node, path,
+                             PROM_SCRATCH_SIZE-10) == PROM_ERROR)
                        continue;
                prom_printf("found display   : %s, opening ... ", path);
                
                ih = call_prom("open", 1, 1, path);
-               if (ih == (ihandle)0 || ih == (ihandle)-1) {
+               if (ih == 0) {
                        prom_printf("failed\n");
                        continue;
                }
@@ -1514,6 +1528,12 @@ static unsigned long __init dt_find_string(char *str)
        return 0;
 }
 
+/*
+ * The Open Firmware 1275 specification states properties must be 31 bytes or
+ * less, however not all firmwares obey this. Make it 64 bytes to be safe.
+ */
+#define MAX_PROPERTY_NAME 64
+
 static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start,
                                         unsigned long *mem_end)
 {
@@ -1527,10 +1547,12 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start,
        /* get and store all property names */
        prev_name = RELOC("");
        for (;;) {
-               
-               /* 32 is max len of name including nul. */
-               namep = make_room(mem_start, mem_end, 32, 1);
-               if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) {
+               int rc;
+
+               /* 64 is max len of name including nul. */
+               namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1);
+               rc = call_prom("nextprop", 3, 1, node, prev_name, namep);
+               if (rc != 1) {
                        /* No more nodes: unwind alloc */
                        *mem_start = (unsigned long)namep;
                        break;
@@ -1555,12 +1577,6 @@ static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start,
        }
 }
 
-/*
- * The Open Firmware 1275 specification states properties must be 31 bytes or
- * less, however not all firmwares obey this. Make it 64 bytes to be safe.
- */
-#define MAX_PROPERTY_NAME 64
-
 static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
                                        unsigned long *mem_end)
 {
@@ -1607,7 +1623,10 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
        prev_name = RELOC("");
        sstart = (char *)RELOC(dt_string_start);
        for (;;) {
-               if (call_prom("nextprop", 3, 1, node, prev_name, pname) <= 0)
+               int rc;
+
+               rc = call_prom("nextprop", 3, 1, node, prev_name, pname);
+               if (rc != 1)
                        break;
 
                /* find string offset */
@@ -1623,7 +1642,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
                l = call_prom("getproplen", 2, 1, node, pname);
 
                /* sanity checks */
-               if (l < 0)
+               if (l == PROM_ERROR)
                        continue;
                if (l > MAX_PROPERTY_LENGTH) {
                        prom_printf("WARNING: ignoring large property ");
@@ -1771,17 +1790,18 @@ static void __init fixup_device_tree(void)
 
        /* Some G5s have a missing interrupt definition, fix it up here */
        u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000"));
-       if ((long)u3 <= 0)
+       if (!PHANDLE_VALID(u3))
                return;
        i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000"));
-       if ((long)i2c <= 0)
+       if (!PHANDLE_VALID(i2c))
                return;
        mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000"));
-       if ((long)mpic <= 0)
+       if (!PHANDLE_VALID(mpic))
                return;
 
        /* check if proper rev of u3 */
-       if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0)
+       if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
+           == PROM_ERROR)
                return;
        if (u3_rev != 0x35)
                return;