* Authors: AMD
*
*/
+#include <drm/drm_dsc.h>
#include "os_types.h"
#include "rc_calc.h"
break
-void get_qp_set(qp_set qps, enum colour_mode cm, enum bits_per_comp bpc, enum max_min max_min, float bpp)
+static void get_qp_set(qp_set qps, enum colour_mode cm, enum bits_per_comp bpc,
+ enum max_min max_min, float bpp)
{
int mode = MODE_SELECT(444, 422, 420);
int sel = table_hash(mode, bpc, max_min);
memcpy(qps, table[index].qps, sizeof(qp_set));
}
-double dsc_roundf(double num)
+static double dsc_roundf(double num)
{
if (num < 0.0)
num = num - 0.5;
return (int)(num);
}
-double dsc_ceil(double num)
+static double dsc_ceil(double num)
{
double retval = (int)num;
return (int)retval;
}
-void get_ofs_set(qp_set ofs, enum colour_mode mode, float bpp)
+static void get_ofs_set(qp_set ofs, enum colour_mode mode, float bpp)
{
int *p = ofs;
}
}
-int median3(int a, int b, int c)
+static int median3(int a, int b, int c)
{
if (a > b)
swap(a, b);
return b;
}
-void calc_rc_params(struct rc_params *rc, enum colour_mode cm, enum bits_per_comp bpc, float bpp, int slice_width, int slice_height, int minor_version)
+static void _do_calc_rc_params(struct rc_params *rc, enum colour_mode cm,
+ enum bits_per_comp bpc, u8 drm_bpp,
+ bool is_navite_422_or_420,
+ int slice_width, int slice_height,
+ int minor_version)
{
+ float bpp;
float bpp_group;
float initial_xmit_delay_factor;
int padding_pixels;
int i;
+ bpp = ((float)drm_bpp / 16.0);
+ /* in native_422 or native_420 modes, the bits_per_pixel is double the
+ * target bpp (the latter is what calc_rc_params expects)
+ */
+ if (is_navite_422_or_420)
+ bpp /= 2.0;
+
rc->rc_quant_incr_limit0 = ((bpc == BPC_8) ? 11 : (bpc == BPC_10 ? 15 : 19)) - ((minor_version == 1 && cm == CM_444) ? 1 : 0);
rc->rc_quant_incr_limit1 = ((bpc == BPC_8) ? 11 : (bpc == BPC_10 ? 15 : 19)) - ((minor_version == 1 && cm == CM_444) ? 1 : 0);
rc->rc_buf_thresh[13] = 8064;
}
+static u32 _do_bytes_per_pixel_calc(int slice_width, u8 drm_bpp,
+ bool is_navite_422_or_420)
+{
+ float bpp;
+ u32 bytes_per_pixel;
+ double d_bytes_per_pixel;
+
+ bpp = ((float)drm_bpp / 16.0);
+ d_bytes_per_pixel = dsc_ceil(bpp * slice_width / 8.0) / slice_width;
+ // TODO: Make sure the formula for calculating this is precise (ceiling
+ // vs. floor, and at what point they should be applied)
+ if (is_navite_422_or_420)
+ d_bytes_per_pixel /= 2;
+
+ bytes_per_pixel = (u32)dsc_ceil(d_bytes_per_pixel * 0x10000000);
+
+ return bytes_per_pixel;
+}
+
+static u32 _do_calc_dsc_bpp_x16(u32 stream_bandwidth_kbps, u32 pix_clk_100hz,
+ u32 bpp_increment_div)
+{
+ u32 dsc_target_bpp_x16;
+ float f_dsc_target_bpp;
+ float f_stream_bandwidth_100bps;
+ // bpp_increment_div is actually precision
+ u32 precision = bpp_increment_div;
+
+ f_stream_bandwidth_100bps = stream_bandwidth_kbps * 10.0f;
+ f_dsc_target_bpp = f_stream_bandwidth_100bps / pix_clk_100hz;
+
+ // Round down to the nearest precision stop to bring it into DSC spec
+ // range
+ dsc_target_bpp_x16 = (u32)(f_dsc_target_bpp * precision);
+ dsc_target_bpp_x16 = (dsc_target_bpp_x16 * 16) / precision;
+
+ return dsc_target_bpp_x16;
+}
+
+/**
+ * calc_rc_params - reads the user's cmdline mode
+ * @rc: DC internal DSC parameters
+ * @pps: DRM struct with all required DSC values
+ *
+ * This function expects a drm_dsc_config data struct with all the required DSC
+ * values previously filled out by our driver and based on this information it
+ * computes some of the DSC values.
+ *
+ * @note This calculation requires float point operation, most of it executes
+ * under kernel_fpu_{begin,end}.
+ */
+void calc_rc_params(struct rc_params *rc, const struct drm_dsc_config *pps)
+{
+ enum colour_mode mode;
+ enum bits_per_comp bpc;
+ bool is_navite_422_or_420;
+ u8 drm_bpp = pps->bits_per_pixel;
+ int slice_width = pps->slice_width;
+ int slice_height = pps->slice_height;
+
+ mode = pps->convert_rgb ? CM_RGB : (pps->simple_422 ? CM_444 :
+ (pps->native_422 ? CM_422 :
+ pps->native_420 ? CM_420 : CM_444));
+ bpc = (pps->bits_per_component == 8) ? BPC_8 : (pps->bits_per_component == 10)
+ ? BPC_10 : BPC_12;
+
+ is_navite_422_or_420 = pps->native_422 || pps->native_420;
+
+ DC_FP_START();
+ _do_calc_rc_params(rc, mode, bpc, drm_bpp, is_navite_422_or_420,
+ slice_width, slice_height,
+ pps->dsc_version_minor);
+ DC_FP_END();
+}
+
+/**
+ * calc_dsc_bytes_per_pixel - calculate bytes per pixel
+ * @pps: DRM struct with all required DSC values
+ *
+ * Based on the information inside drm_dsc_config, this function calculates the
+ * total of bytes per pixel.
+ *
+ * @note This calculation requires float point operation, most of it executes
+ * under kernel_fpu_{begin,end}.
+ *
+ * Return:
+ * Return the number of bytes per pixel
+ */
+u32 calc_dsc_bytes_per_pixel(const struct drm_dsc_config *pps)
+
+{
+ u32 ret;
+ u8 drm_bpp = pps->bits_per_pixel;
+ int slice_width = pps->slice_width;
+ bool is_navite_422_or_420 = pps->native_422 || pps->native_420;
+
+ DC_FP_START();
+ ret = _do_bytes_per_pixel_calc(slice_width, drm_bpp,
+ is_navite_422_or_420);
+ DC_FP_END();
+ return ret;
+}
+
+/**
+ * calc_dsc_bpp_x16 - retrieve the dsc bits per pixel
+ * @stream_bandwidth_kbps:
+ * @pix_clk_100hz:
+ * @bpp_increment_div:
+ *
+ * Calculate the total of bits per pixel for DSC configuration.
+ *
+ * @note This calculation requires float point operation, most of it executes
+ * under kernel_fpu_{begin,end}.
+ */
+u32 calc_dsc_bpp_x16(u32 stream_bandwidth_kbps, u32 pix_clk_100hz,
+ u32 bpp_increment_div)
+{
+ u32 dsc_bpp;
+
+ DC_FP_START();
+ dsc_bpp = _do_calc_dsc_bpp_x16(stream_bandwidth_kbps, pix_clk_100hz,
+ bpp_increment_div);
+ DC_FP_END();
+ return dsc_bpp;
+}
#include "dscc_types.h"
#include "rc_calc.h"
-double dsc_ceil(double num);
-
static void copy_pps_fields(struct drm_dsc_config *to, const struct drm_dsc_config *from)
{
to->line_buf_depth = from->line_buf_depth;
int dscc_compute_dsc_parameters(const struct drm_dsc_config *pps, struct dsc_parameters *dsc_params)
{
- enum colour_mode mode = pps->convert_rgb ? CM_RGB :
- (pps->simple_422 ? CM_444 :
- (pps->native_422 ? CM_422 :
- pps->native_420 ? CM_420 : CM_444));
- enum bits_per_comp bpc = (pps->bits_per_component == 8) ? BPC_8 :
- (pps->bits_per_component == 10) ? BPC_10 : BPC_12;
- float bpp = ((float) pps->bits_per_pixel / 16.0);
- int slice_width = pps->slice_width;
- int slice_height = pps->slice_height;
int ret;
struct rc_params rc;
struct drm_dsc_config dsc_cfg;
- double d_bytes_per_pixel = dsc_ceil(bpp * slice_width / 8.0) / slice_width;
-
- // TODO: Make sure the formula for calculating this is precise (ceiling vs. floor, and at what point they should be applied)
- if (pps->native_422 || pps->native_420)
- d_bytes_per_pixel /= 2;
-
- dsc_params->bytes_per_pixel = (uint32_t)dsc_ceil(d_bytes_per_pixel * 0x10000000);
-
- /* in native_422 or native_420 modes, the bits_per_pixel is double the target bpp
- * (the latter is what calc_rc_params expects)
- */
- if (pps->native_422 || pps->native_420)
- bpp /= 2.0;
+ dsc_params->bytes_per_pixel = calc_dsc_bytes_per_pixel(pps);
- calc_rc_params(&rc, mode, bpc, bpp, slice_width, slice_height, pps->dsc_version_minor);
+ calc_rc_params(&rc, pps);
dsc_params->pps = *pps;
dsc_params->pps.initial_scale_value = 8 * rc.rc_model_size / (rc.rc_model_size - rc.initial_fullness_offset);
projects / platform / kernel / linux-rpi.git / commitdiff