| USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, &buf, 4);
if (unlikely(ret < 0))
- netdev_warn(dev->net,
- "Failed to read reg index 0x%08x: %d", index, ret);
+ netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
+ index, ret);
le32_to_cpus(&buf);
*data = buf;
| USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, &buf, 4);
if (unlikely(ret < 0))
- netdev_warn(dev->net,
- "Failed to write reg index 0x%08x: %d", index, ret);
+ netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
+ index, ret);
return ret;
}
do {
ret = smsc75xx_read_reg(dev, MII_ACCESS, &val);
- check_warn_return(ret, "Error reading MII_ACCESS");
+ check_warn_return(ret, "Error reading MII_ACCESS\n");
if (!(val & MII_ACCESS_BUSY))
return 0;
/* confirm MII not busy */
ret = smsc75xx_phy_wait_not_busy(dev);
- check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read");
+ check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read\n");
/* set the address, index & direction (read from PHY) */
phy_id &= dev->mii.phy_id_mask;
| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
| MII_ACCESS_READ | MII_ACCESS_BUSY;
ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
- check_warn_goto_done(ret, "Error writing MII_ACCESS");
+ check_warn_goto_done(ret, "Error writing MII_ACCESS\n");
ret = smsc75xx_phy_wait_not_busy(dev);
- check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx);
+ check_warn_goto_done(ret, "Timed out reading MII reg %02X\n", idx);
ret = smsc75xx_read_reg(dev, MII_DATA, &val);
- check_warn_goto_done(ret, "Error reading MII_DATA");
+ check_warn_goto_done(ret, "Error reading MII_DATA\n");
ret = (u16)(val & 0xFFFF);
/* confirm MII not busy */
ret = smsc75xx_phy_wait_not_busy(dev);
- check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write");
+ check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write\n");
val = regval;
ret = smsc75xx_write_reg(dev, MII_DATA, val);
- check_warn_goto_done(ret, "Error writing MII_DATA");
+ check_warn_goto_done(ret, "Error writing MII_DATA\n");
/* set the address, index & direction (write to PHY) */
phy_id &= dev->mii.phy_id_mask;
| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
| MII_ACCESS_WRITE | MII_ACCESS_BUSY;
ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
- check_warn_goto_done(ret, "Error writing MII_ACCESS");
+ check_warn_goto_done(ret, "Error writing MII_ACCESS\n");
ret = smsc75xx_phy_wait_not_busy(dev);
- check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx);
+ check_warn_goto_done(ret, "Timed out writing MII reg %02X\n", idx);
done:
mutex_unlock(&dev->phy_mutex);
do {
ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
- check_warn_return(ret, "Error reading E2P_CMD");
+ check_warn_return(ret, "Error reading E2P_CMD\n");
if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT))
break;
} while (!time_after(jiffies, start_time + HZ));
if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) {
- netdev_warn(dev->net, "EEPROM read operation timeout");
+ netdev_warn(dev->net, "EEPROM read operation timeout\n");
return -EIO;
}
do {
ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
- check_warn_return(ret, "Error reading E2P_CMD");
+ check_warn_return(ret, "Error reading E2P_CMD\n");
if (!(val & E2P_CMD_BUSY))
return 0;
udelay(40);
} while (!time_after(jiffies, start_time + HZ));
- netdev_warn(dev->net, "EEPROM is busy");
+ netdev_warn(dev->net, "EEPROM is busy\n");
return -EIO;
}
for (i = 0; i < length; i++) {
val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR);
ret = smsc75xx_write_reg(dev, E2P_CMD, val);
- check_warn_return(ret, "Error writing E2P_CMD");
+ check_warn_return(ret, "Error writing E2P_CMD\n");
ret = smsc75xx_wait_eeprom(dev);
if (ret < 0)
return ret;
ret = smsc75xx_read_reg(dev, E2P_DATA, &val);
- check_warn_return(ret, "Error reading E2P_DATA");
+ check_warn_return(ret, "Error reading E2P_DATA\n");
data[i] = val & 0xFF;
offset++;
/* Issue write/erase enable command */
val = E2P_CMD_BUSY | E2P_CMD_EWEN;
ret = smsc75xx_write_reg(dev, E2P_CMD, val);
- check_warn_return(ret, "Error writing E2P_CMD");
+ check_warn_return(ret, "Error writing E2P_CMD\n");
ret = smsc75xx_wait_eeprom(dev);
if (ret < 0)
/* Fill data register */
val = data[i];
ret = smsc75xx_write_reg(dev, E2P_DATA, val);
- check_warn_return(ret, "Error writing E2P_DATA");
+ check_warn_return(ret, "Error writing E2P_DATA\n");
/* Send "write" command */
val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR);
ret = smsc75xx_write_reg(dev, E2P_CMD, val);
- check_warn_return(ret, "Error writing E2P_CMD");
+ check_warn_return(ret, "Error writing E2P_CMD\n");
ret = smsc75xx_wait_eeprom(dev);
if (ret < 0)
for (i = 0; i < 100; i++) {
u32 dp_sel;
ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
- check_warn_return(ret, "Error reading DP_SEL");
+ check_warn_return(ret, "Error reading DP_SEL\n");
if (dp_sel & DP_SEL_DPRDY)
return 0;
udelay(40);
}
- netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out");
+ netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out\n");
return -EIO;
}
mutex_lock(&pdata->dataport_mutex);
ret = smsc75xx_dataport_wait_not_busy(dev);
- check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry");
+ check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry\n");
ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
- check_warn_goto_done(ret, "Error reading DP_SEL");
+ check_warn_goto_done(ret, "Error reading DP_SEL\n");
dp_sel &= ~DP_SEL_RSEL;
dp_sel |= ram_select;
ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel);
- check_warn_goto_done(ret, "Error writing DP_SEL");
+ check_warn_goto_done(ret, "Error writing DP_SEL\n");
for (i = 0; i < length; i++) {
ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i);
- check_warn_goto_done(ret, "Error writing DP_ADDR");
+ check_warn_goto_done(ret, "Error writing DP_ADDR\n");
ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]);
- check_warn_goto_done(ret, "Error writing DP_DATA");
+ check_warn_goto_done(ret, "Error writing DP_DATA\n");
ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE);
- check_warn_goto_done(ret, "Error writing DP_CMD");
+ check_warn_goto_done(ret, "Error writing DP_CMD\n");
ret = smsc75xx_dataport_wait_not_busy(dev);
- check_warn_goto_done(ret, "smsc75xx_dataport_write timeout");
+ check_warn_goto_done(ret, "smsc75xx_dataport_write timeout\n");
}
done:
struct usbnet *dev = pdata->dev;
int ret;
- netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x",
- pdata->rfe_ctl);
+ netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x\n",
+ pdata->rfe_ctl);
smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN,
DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table);
ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
- check_warn(ret, "Error writing RFE_CRL");
+ check_warn(ret, "Error writing RFE_CRL\n");
}
static void smsc75xx_set_multicast(struct net_device *netdev)
pdata->multicast_hash_table[i] = 0;
if (dev->net->flags & IFF_PROMISC) {
- netif_dbg(dev, drv, dev->net, "promiscuous mode enabled");
+ netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n");
pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU;
} else if (dev->net->flags & IFF_ALLMULTI) {
- netif_dbg(dev, drv, dev->net, "receive all multicast enabled");
+ netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n");
pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF;
} else if (!netdev_mc_empty(dev->net)) {
struct netdev_hw_addr *ha;
- netif_dbg(dev, drv, dev->net, "receive multicast hash filter");
+ netif_dbg(dev, drv, dev->net, "receive multicast hash filter\n");
pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF;
(1 << (bitnum % 32));
}
} else {
- netif_dbg(dev, drv, dev->net, "receive own packets only");
+ netif_dbg(dev, drv, dev->net, "receive own packets only\n");
pdata->rfe_ctl |= RFE_CTL_DPF;
}
if (cap & FLOW_CTRL_RX)
flow |= FLOW_RX_FCEN;
- netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s",
- (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
- (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
+ netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n",
+ (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
+ (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
} else {
- netif_dbg(dev, link, dev->net, "half duplex");
+ netif_dbg(dev, link, dev->net, "half duplex\n");
}
ret = smsc75xx_write_reg(dev, FLOW, flow);
- check_warn_return(ret, "Error writing FLOW");
+ check_warn_return(ret, "Error writing FLOW\n");
ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow);
- check_warn_return(ret, "Error writing FCT_FLOW");
+ check_warn_return(ret, "Error writing FCT_FLOW\n");
return 0;
}
PHY_INT_SRC_CLEAR_ALL);
ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
- check_warn_return(ret, "Error writing INT_STS");
+ check_warn_return(ret, "Error writing INT_STS\n");
mii_check_media(mii, 1, 1);
mii_ethtool_gset(&dev->mii, &ecmd);
lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
- netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x"
- " rmtadv: %04x", ethtool_cmd_speed(&ecmd),
- ecmd.duplex, lcladv, rmtadv);
+ netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
+ ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv);
return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
}
u32 intdata;
if (urb->actual_length != 4) {
- netdev_warn(dev->net,
- "unexpected urb length %d", urb->actual_length);
+ netdev_warn(dev->net, "unexpected urb length %d\n",
+ urb->actual_length);
return;
}
memcpy(&intdata, urb->transfer_buffer, 4);
le32_to_cpus(&intdata);
- netif_dbg(dev, link, dev->net, "intdata: 0x%08X", intdata);
+ netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata);
if (intdata & INT_ENP_PHY_INT)
usbnet_defer_kevent(dev, EVENT_LINK_RESET);
else
- netdev_warn(dev->net,
- "unexpected interrupt, intdata=0x%08X", intdata);
+ netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n",
+ intdata);
}
static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
struct usbnet *dev = netdev_priv(netdev);
if (ee->magic != LAN75XX_EEPROM_MAGIC) {
- netdev_warn(dev->net,
- "EEPROM: magic value mismatch: 0x%x", ee->magic);
+ netdev_warn(dev->net, "EEPROM: magic value mismatch: 0x%x\n",
+ ee->magic);
return -EINVAL;
}
if (is_valid_ether_addr(dev->net->dev_addr)) {
/* eeprom values are valid so use them */
netif_dbg(dev, ifup, dev->net,
- "MAC address read from EEPROM");
+ "MAC address read from EEPROM\n");
return;
}
}
/* no eeprom, or eeprom values are invalid. generate random MAC */
eth_hw_addr_random(dev->net);
- netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr");
+ netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
}
static int smsc75xx_set_mac_address(struct usbnet *dev)
u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi);
- check_warn_return(ret, "Failed to write RX_ADDRH: %d", ret);
+ check_warn_return(ret, "Failed to write RX_ADDRH: %d\n", ret);
ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo);
- check_warn_return(ret, "Failed to write RX_ADDRL: %d", ret);
+ check_warn_return(ret, "Failed to write RX_ADDRL: %d\n", ret);
addr_hi |= ADDR_FILTX_FB_VALID;
ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi);
- check_warn_return(ret, "Failed to write ADDR_FILTX: %d", ret);
+ check_warn_return(ret, "Failed to write ADDR_FILTX: %d\n", ret);
ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo);
- check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d", ret);
+ check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d\n", ret);
return 0;
}
do {
msleep(10);
bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
- check_warn_return(bmcr, "Error reading MII_BMCR");
+ check_warn_return(bmcr, "Error reading MII_BMCR\n");
timeout++;
} while ((bmcr & BMCR_RESET) && (timeout < 100));
if (timeout >= 100) {
- netdev_warn(dev->net, "timeout on PHY Reset");
+ netdev_warn(dev->net, "timeout on PHY Reset\n");
return -EIO;
}
/* read and write to clear phy interrupt status */
ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
- check_warn_return(ret, "Error reading PHY_INT_SRC");
+ check_warn_return(ret, "Error reading PHY_INT_SRC\n");
smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff);
smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
PHY_INT_MASK_DEFAULT);
mii_nway_restart(&dev->mii);
- netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
+ netif_dbg(dev, ifup, dev->net, "phy initialised successfully\n");
return 0;
}
bool rxenabled;
ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
- check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
+ check_warn_return(ret, "Failed to read MAC_RX: %d\n", ret);
rxenabled = ((buf & MAC_RX_RXEN) != 0);
if (rxenabled) {
buf &= ~MAC_RX_RXEN;
ret = smsc75xx_write_reg(dev, MAC_RX, buf);
- check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+ check_warn_return(ret, "Failed to write MAC_RX: %d\n", ret);
}
/* add 4 to size for FCS */
buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE);
ret = smsc75xx_write_reg(dev, MAC_RX, buf);
- check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+ check_warn_return(ret, "Failed to write MAC_RX: %d\n", ret);
if (rxenabled) {
buf |= MAC_RX_RXEN;
ret = smsc75xx_write_reg(dev, MAC_RX, buf);
- check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+ check_warn_return(ret, "Failed to write MAC_RX: %d\n", ret);
}
return 0;
struct usbnet *dev = netdev_priv(netdev);
int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
- check_warn_return(ret, "Failed to set mac rx frame length");
+ check_warn_return(ret, "Failed to set mac rx frame length\n");
return usbnet_change_mtu(netdev, new_mtu);
}
/* it's racing here! */
ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
- check_warn_return(ret, "Error writing RFE_CTL");
+ check_warn_return(ret, "Error writing RFE_CTL\n");
return 0;
}
ret = __smsc75xx_read_reg(dev, PMT_CTL, &buf, in_pm);
- check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
+ check_warn_return(ret, "Failed to read PMT_CTL: %d\n", ret);
if (buf & PMT_CTL_DEV_RDY)
return 0;
timeout++;
} while (timeout < 100);
- netdev_warn(dev->net, "timeout waiting for device ready");
+ netdev_warn(dev->net, "timeout waiting for device ready\n");
return -EIO;
}
u32 buf;
int ret = 0, timeout;
- netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset");
+ netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset\n");
ret = smsc75xx_wait_ready(dev, 0);
- check_warn_return(ret, "device not ready in smsc75xx_reset");
+ check_warn_return(ret, "device not ready in smsc75xx_reset\n");
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
- check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+ check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
buf |= HW_CFG_LRST;
ret = smsc75xx_write_reg(dev, HW_CFG, buf);
- check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+ check_warn_return(ret, "Failed to write HW_CFG: %d\n", ret);
timeout = 0;
do {
msleep(10);
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
- check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+ check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
timeout++;
} while ((buf & HW_CFG_LRST) && (timeout < 100));
if (timeout >= 100) {
- netdev_warn(dev->net, "timeout on completion of Lite Reset");
+ netdev_warn(dev->net, "timeout on completion of Lite Reset\n");
return -EIO;
}
- netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY");
+ netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY\n");
ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
- check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
+ check_warn_return(ret, "Failed to read PMT_CTL: %d\n", ret);
buf |= PMT_CTL_PHY_RST;
ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
- check_warn_return(ret, "Failed to write PMT_CTL: %d", ret);
+ check_warn_return(ret, "Failed to write PMT_CTL: %d\n", ret);
timeout = 0;
do {
msleep(10);
ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
- check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
+ check_warn_return(ret, "Failed to read PMT_CTL: %d\n", ret);
timeout++;
} while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
if (timeout >= 100) {
- netdev_warn(dev->net, "timeout waiting for PHY Reset");
+ netdev_warn(dev->net, "timeout waiting for PHY Reset\n");
return -EIO;
}
- netif_dbg(dev, ifup, dev->net, "PHY reset complete");
+ netif_dbg(dev, ifup, dev->net, "PHY reset complete\n");
smsc75xx_init_mac_address(dev);
ret = smsc75xx_set_mac_address(dev);
- check_warn_return(ret, "Failed to set mac address");
+ check_warn_return(ret, "Failed to set mac address\n");
- netif_dbg(dev, ifup, dev->net, "MAC Address: %pM", dev->net->dev_addr);
+ netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n",
+ dev->net->dev_addr);
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
- check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+ check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x", buf);
+ netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n",
+ buf);
buf |= HW_CFG_BIR;
ret = smsc75xx_write_reg(dev, HW_CFG, buf);
- check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+ check_warn_return(ret, "Failed to write HW_CFG: %d\n", ret);
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
- check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+ check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after "
- "writing HW_CFG_BIR: 0x%08x", buf);
+ netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after writing HW_CFG_BIR: 0x%08x\n",
+ buf);
if (!turbo_mode) {
buf = 0;
dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
}
- netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld",
- (ulong)dev->rx_urb_size);
+ netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
+ (ulong)dev->rx_urb_size);
ret = smsc75xx_write_reg(dev, BURST_CAP, buf);
- check_warn_return(ret, "Failed to write BURST_CAP: %d", ret);
+ check_warn_return(ret, "Failed to write BURST_CAP: %d\n", ret);
ret = smsc75xx_read_reg(dev, BURST_CAP, &buf);
- check_warn_return(ret, "Failed to read BURST_CAP: %d", ret);
+ check_warn_return(ret, "Failed to read BURST_CAP: %d\n", ret);
netif_dbg(dev, ifup, dev->net,
- "Read Value from BURST_CAP after writing: 0x%08x", buf);
+ "Read Value from BURST_CAP after writing: 0x%08x\n", buf);
ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
- check_warn_return(ret, "Failed to write BULK_IN_DLY: %d", ret);
+ check_warn_return(ret, "Failed to write BULK_IN_DLY: %d\n", ret);
ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf);
- check_warn_return(ret, "Failed to read BULK_IN_DLY: %d", ret);
+ check_warn_return(ret, "Failed to read BULK_IN_DLY: %d\n", ret);
netif_dbg(dev, ifup, dev->net,
- "Read Value from BULK_IN_DLY after writing: 0x%08x", buf);
+ "Read Value from BULK_IN_DLY after writing: 0x%08x\n", buf);
if (turbo_mode) {
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
- check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+ check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
+ netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x\n", buf);
buf |= (HW_CFG_MEF | HW_CFG_BCE);
ret = smsc75xx_write_reg(dev, HW_CFG, buf);
- check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+ check_warn_return(ret, "Failed to write HW_CFG: %d\n", ret);
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
- check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+ check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
+ netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x\n", buf);
}
/* set FIFO sizes */
buf = (MAX_RX_FIFO_SIZE - 512) / 512;
ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf);
- check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d", ret);
+ check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x", buf);
+ netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x\n", buf);
buf = (MAX_TX_FIFO_SIZE - 512) / 512;
ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf);
- check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d", ret);
+ check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x", buf);
+ netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x\n", buf);
ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
- check_warn_return(ret, "Failed to write INT_STS: %d", ret);
+ check_warn_return(ret, "Failed to write INT_STS: %d\n", ret);
ret = smsc75xx_read_reg(dev, ID_REV, &buf);
- check_warn_return(ret, "Failed to read ID_REV: %d", ret);
+ check_warn_return(ret, "Failed to read ID_REV: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf);
+ netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", buf);
ret = smsc75xx_read_reg(dev, E2P_CMD, &buf);
- check_warn_return(ret, "Failed to read E2P_CMD: %d", ret);
+ check_warn_return(ret, "Failed to read E2P_CMD: %d\n", ret);
/* only set default GPIO/LED settings if no EEPROM is detected */
if (!(buf & E2P_CMD_LOADED)) {
ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
- check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret);
+ check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d\n",
+ ret);
buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
- check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret);
+ check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d\n",
+ ret);
}
ret = smsc75xx_write_reg(dev, FLOW, 0);
- check_warn_return(ret, "Failed to write FLOW: %d", ret);
+ check_warn_return(ret, "Failed to write FLOW: %d\n", ret);
ret = smsc75xx_write_reg(dev, FCT_FLOW, 0);
- check_warn_return(ret, "Failed to write FCT_FLOW: %d", ret);
+ check_warn_return(ret, "Failed to write FCT_FLOW: %d\n", ret);
/* Don't need rfe_ctl_lock during initialisation */
ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
- check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
+ check_warn_return(ret, "Failed to read RFE_CTL: %d\n", ret);
pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF;
ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
- check_warn_return(ret, "Failed to write RFE_CTL: %d", ret);
+ check_warn_return(ret, "Failed to write RFE_CTL: %d\n", ret);
ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
- check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
+ check_warn_return(ret, "Failed to read RFE_CTL: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
+ netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x\n",
+ pdata->rfe_ctl);
/* Enable or disable checksum offload engines */
smsc75xx_set_features(dev->net, dev->net->features);
smsc75xx_set_multicast(dev->net);
ret = smsc75xx_phy_initialize(dev);
- check_warn_return(ret, "Failed to initialize PHY: %d", ret);
+ check_warn_return(ret, "Failed to initialize PHY: %d\n", ret);
ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf);
- check_warn_return(ret, "Failed to read INT_EP_CTL: %d", ret);
+ check_warn_return(ret, "Failed to read INT_EP_CTL: %d\n", ret);
/* enable PHY interrupts */
buf |= INT_ENP_PHY_INT;
ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
- check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret);
+ check_warn_return(ret, "Failed to write INT_EP_CTL: %d\n", ret);
/* allow mac to detect speed and duplex from phy */
ret = smsc75xx_read_reg(dev, MAC_CR, &buf);
- check_warn_return(ret, "Failed to read MAC_CR: %d", ret);
+ check_warn_return(ret, "Failed to read MAC_CR: %d\n", ret);
buf |= (MAC_CR_ADD | MAC_CR_ASD);
ret = smsc75xx_write_reg(dev, MAC_CR, buf);
- check_warn_return(ret, "Failed to write MAC_CR: %d", ret);
+ check_warn_return(ret, "Failed to write MAC_CR: %d\n", ret);
ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
- check_warn_return(ret, "Failed to read MAC_TX: %d", ret);
+ check_warn_return(ret, "Failed to read MAC_TX: %d\n", ret);
buf |= MAC_TX_TXEN;
ret = smsc75xx_write_reg(dev, MAC_TX, buf);
- check_warn_return(ret, "Failed to write MAC_TX: %d", ret);
+ check_warn_return(ret, "Failed to write MAC_TX: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x", buf);
+ netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x\n", buf);
ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf);
- check_warn_return(ret, "Failed to read FCT_TX_CTL: %d", ret);
+ check_warn_return(ret, "Failed to read FCT_TX_CTL: %d\n", ret);
buf |= FCT_TX_CTL_EN;
ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf);
- check_warn_return(ret, "Failed to write FCT_TX_CTL: %d", ret);
+ check_warn_return(ret, "Failed to write FCT_TX_CTL: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf);
+ netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf);
ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
- check_warn_return(ret, "Failed to set max rx frame length");
+ check_warn_return(ret, "Failed to set max rx frame length\n");
ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
- check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
+ check_warn_return(ret, "Failed to read MAC_RX: %d\n", ret);
buf |= MAC_RX_RXEN;
ret = smsc75xx_write_reg(dev, MAC_RX, buf);
- check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+ check_warn_return(ret, "Failed to write MAC_RX: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x", buf);
+ netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x\n", buf);
ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf);
- check_warn_return(ret, "Failed to read FCT_RX_CTL: %d", ret);
+ check_warn_return(ret, "Failed to read FCT_RX_CTL: %d\n", ret);
buf |= FCT_RX_CTL_EN;
ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf);
- check_warn_return(ret, "Failed to write FCT_RX_CTL: %d", ret);
+ check_warn_return(ret, "Failed to write FCT_RX_CTL: %d\n", ret);
- netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x", buf);
+ netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x\n", buf);
- netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0");
+ netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0\n");
return 0;
}
printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
ret = usbnet_get_endpoints(dev, intf);
- check_warn_return(ret, "usbnet_get_endpoints failed: %d", ret);
+ check_warn_return(ret, "usbnet_get_endpoints failed: %d\n", ret);
dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv),
GFP_KERNEL);
pdata = (struct smsc75xx_priv *)(dev->data[0]);
if (!pdata) {
- netdev_warn(dev->net, "Unable to allocate smsc75xx_priv");
+ netdev_warn(dev->net, "Unable to allocate smsc75xx_priv\n");
return -ENOMEM;
}
{
struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
if (pdata) {
- netif_dbg(dev, ifdown, dev->net, "free pdata");
+ netif_dbg(dev, ifdown, dev->net, "free pdata\n");
kfree(pdata);
pdata = NULL;
dev->data[0] = 0;
int ret;
ret = smsc75xx_write_reg(dev, cfg_base, wuf_cfg);
- check_warn_return(ret, "Error writing WUF_CFGX");
+ check_warn_return(ret, "Error writing WUF_CFGX\n");
ret = smsc75xx_write_reg(dev, mask_base, wuf_mask1);
- check_warn_return(ret, "Error writing WUF_MASKX");
+ check_warn_return(ret, "Error writing WUF_MASKX\n");
ret = smsc75xx_write_reg(dev, mask_base + 4, 0);
- check_warn_return(ret, "Error writing WUF_MASKX");
+ check_warn_return(ret, "Error writing WUF_MASKX\n");
ret = smsc75xx_write_reg(dev, mask_base + 8, 0);
- check_warn_return(ret, "Error writing WUF_MASKX");
+ check_warn_return(ret, "Error writing WUF_MASKX\n");
ret = smsc75xx_write_reg(dev, mask_base + 12, 0);
- check_warn_return(ret, "Error writing WUF_MASKX");
+ check_warn_return(ret, "Error writing WUF_MASKX\n");
return 0;
}
u32 val;
ret = usbnet_suspend(intf, message);
- check_warn_return(ret, "usbnet_suspend error");
+ check_warn_return(ret, "usbnet_suspend error\n");
/* if no wol options set, enter lowest power SUSPEND2 mode */
if (!(pdata->wolopts & SUPPORTED_WAKE)) {
- netdev_info(dev->net, "entering SUSPEND2 mode");
+ netdev_info(dev->net, "entering SUSPEND2 mode\n");
/* disable energy detect (link up) & wake up events */
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val &= ~(WUCSR_MPEN | WUCSR_WUEN);
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
- check_warn_return(ret, "Error reading PMT_CTL");
+ check_warn_return(ret, "Error reading PMT_CTL\n");
val &= ~(PMT_CTL_ED_EN | PMT_CTL_WOL_EN);
ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
- check_warn_return(ret, "Error writing PMT_CTL");
+ check_warn_return(ret, "Error writing PMT_CTL\n");
/* enter suspend2 mode */
ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
- check_warn_return(ret, "Error reading PMT_CTL");
+ check_warn_return(ret, "Error reading PMT_CTL\n");
val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST);
val |= PMT_CTL_SUS_MODE_2;
ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
- check_warn_return(ret, "Error writing PMT_CTL");
+ check_warn_return(ret, "Error writing PMT_CTL\n");
return 0;
}
/* disable all filters */
for (i = 0; i < WUF_NUM; i++) {
ret = smsc75xx_write_reg_nopm(dev, WUF_CFGX + i * 4, 0);
- check_warn_return(ret, "Error writing WUF_CFGX");
+ check_warn_return(ret, "Error writing WUF_CFGX\n");
}
if (pdata->wolopts & WAKE_MCAST) {
const u8 mcast[] = {0x01, 0x00, 0x5E};
- netdev_info(dev->net, "enabling multicast detection");
+ netdev_info(dev->net, "enabling multicast detection\n");
val = WUF_CFGX_EN | WUF_CFGX_ATYPE_MULTICAST
| smsc_crc(mcast, 3);
ret = smsc75xx_write_wuff(dev, filter++, val, 0x0007);
- check_warn_return(ret, "Error writing wakeup filter");
+ check_warn_return(ret, "Error writing wakeup filter\n");
}
if (pdata->wolopts & WAKE_ARP) {
const u8 arp[] = {0x08, 0x06};
- netdev_info(dev->net, "enabling ARP detection");
+ netdev_info(dev->net, "enabling ARP detection\n");
val = WUF_CFGX_EN | WUF_CFGX_ATYPE_ALL | (0x0C << 16)
| smsc_crc(arp, 2);
ret = smsc75xx_write_wuff(dev, filter++, val, 0x0003);
- check_warn_return(ret, "Error writing wakeup filter");
+ check_warn_return(ret, "Error writing wakeup filter\n");
}
/* clear any pending pattern match packet status */
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val |= WUCSR_WUFR;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
- netdev_info(dev->net, "enabling packet match detection");
+ netdev_info(dev->net, "enabling packet match detection\n");
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val |= WUCSR_WUEN;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
} else {
- netdev_info(dev->net, "disabling packet match detection");
+ netdev_info(dev->net, "disabling packet match detection\n");
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val &= ~WUCSR_WUEN;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
}
/* disable magic, bcast & unicast wakeup sources */
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val &= ~(WUCSR_MPEN | WUCSR_BCST_EN | WUCSR_PFDA_EN);
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
if (pdata->wolopts & WAKE_MAGIC) {
- netdev_info(dev->net, "enabling magic packet wakeup");
+ netdev_info(dev->net, "enabling magic packet wakeup\n");
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
/* clear any pending magic packet status */
val |= WUCSR_MPR | WUCSR_MPEN;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
}
if (pdata->wolopts & WAKE_BCAST) {
- netdev_info(dev->net, "enabling broadcast detection");
+ netdev_info(dev->net, "enabling broadcast detection\n");
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val |= WUCSR_BCAST_FR | WUCSR_BCST_EN;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
}
if (pdata->wolopts & WAKE_UCAST) {
- netdev_info(dev->net, "enabling unicast detection");
+ netdev_info(dev->net, "enabling unicast detection\n");
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val |= WUCSR_WUFR | WUCSR_PFDA_EN;
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
}
/* enable receiver to enable frame reception */
ret = smsc75xx_read_reg_nopm(dev, MAC_RX, &val);
- check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
+ check_warn_return(ret, "Failed to read MAC_RX: %d\n", ret);
val |= MAC_RX_RXEN;
ret = smsc75xx_write_reg_nopm(dev, MAC_RX, val);
- check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+ check_warn_return(ret, "Failed to write MAC_RX: %d\n", ret);
/* some wol options are enabled, so enter SUSPEND0 */
- netdev_info(dev->net, "entering SUSPEND0 mode");
+ netdev_info(dev->net, "entering SUSPEND0 mode\n");
ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
- check_warn_return(ret, "Error reading PMT_CTL");
+ check_warn_return(ret, "Error reading PMT_CTL\n");
val &= (~(PMT_CTL_SUS_MODE | PMT_CTL_PHY_RST));
val |= PMT_CTL_SUS_MODE_0 | PMT_CTL_WOL_EN | PMT_CTL_WUPS;
ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
- check_warn_return(ret, "Error writing PMT_CTL");
+ check_warn_return(ret, "Error writing PMT_CTL\n");
smsc75xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP);
u32 val;
if (pdata->wolopts) {
- netdev_info(dev->net, "resuming from SUSPEND0");
+ netdev_info(dev->net, "resuming from SUSPEND0\n");
smsc75xx_clear_feature(dev, USB_DEVICE_REMOTE_WAKEUP);
/* Disable wakeup sources */
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val &= ~(WUCSR_WUEN | WUCSR_MPEN | WUCSR_PFDA_EN
| WUCSR_BCST_EN);
ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
/* clear wake-up status */
ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
- check_warn_return(ret, "Error reading PMT_CTL");
+ check_warn_return(ret, "Error reading PMT_CTL\n");
val &= ~PMT_CTL_WOL_EN;
val |= PMT_CTL_WUPS;
ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
- check_warn_return(ret, "Error writing PMT_CTL");
+ check_warn_return(ret, "Error writing PMT_CTL\n");
} else {
- netdev_info(dev->net, "resuming from SUSPEND2");
+ netdev_info(dev->net, "resuming from SUSPEND2\n");
ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
- check_warn_return(ret, "Error reading PMT_CTL");
+ check_warn_return(ret, "Error reading PMT_CTL\n");
val |= PMT_CTL_PHY_PWRUP;
ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
- check_warn_return(ret, "Error writing PMT_CTL");
+ check_warn_return(ret, "Error writing PMT_CTL\n");
}
ret = smsc75xx_wait_ready(dev, 1);
- check_warn_return(ret, "device not ready in smsc75xx_resume");
+ check_warn_return(ret, "device not ready in smsc75xx_resume\n");
return usbnet_resume(intf);
}
if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
netif_dbg(dev, rx_err, dev->net,
- "Error rx_cmd_a=0x%08x", rx_cmd_a);
+ "Error rx_cmd_a=0x%08x\n", rx_cmd_a);
dev->net->stats.rx_errors++;
dev->net->stats.rx_dropped++;
/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
if (unlikely(size > (ETH_FRAME_LEN + 12))) {
netif_dbg(dev, rx_err, dev->net,
- "size err rx_cmd_a=0x%08x", rx_cmd_a);
+ "size err rx_cmd_a=0x%08x\n",
+ rx_cmd_a);
return 0;
}
ax_skb = skb_clone(skb, GFP_ATOMIC);
if (unlikely(!ax_skb)) {
- netdev_warn(dev->net, "Error allocating skb");
+ netdev_warn(dev->net, "Error allocating skb\n");
return 0;
}
}
if (unlikely(skb->len < 0)) {
- netdev_warn(dev->net, "invalid rx length<0 %d", skb->len);
+ netdev_warn(dev->net, "invalid rx length<0 %d\n", skb->len);
return 0;
}
| USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, &buf, 4);
if (unlikely(ret < 0))
- netdev_warn(dev->net,
- "Failed to read reg index 0x%08x: %d", index, ret);
+ netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
+ index, ret);
le32_to_cpus(&buf);
*data = buf;
| USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, &buf, 4);
if (unlikely(ret < 0))
- netdev_warn(dev->net,
- "Failed to write reg index 0x%08x: %d", index, ret);
+ netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
+ index, ret);
return ret;
}
do {
ret = __smsc95xx_read_reg(dev, MII_ADDR, &val, in_pm);
- check_warn_return(ret, "Error reading MII_ACCESS");
+ check_warn_return(ret, "Error reading MII_ACCESS\n");
if (!(val & MII_BUSY_))
return 0;
} while (!time_after(jiffies, start_time + HZ));
/* confirm MII not busy */
ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
- check_warn_goto_done(ret, "MII is busy in smsc95xx_mdio_read");
+ check_warn_goto_done(ret, "MII is busy in smsc95xx_mdio_read\n");
/* set the address, index & direction (read from PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_;
ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
- check_warn_goto_done(ret, "Error writing MII_ADDR");
+ check_warn_goto_done(ret, "Error writing MII_ADDR\n");
ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
- check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx);
+ check_warn_goto_done(ret, "Timed out reading MII reg %02X\n", idx);
ret = __smsc95xx_read_reg(dev, MII_DATA, &val, in_pm);
- check_warn_goto_done(ret, "Error reading MII_DATA");
+ check_warn_goto_done(ret, "Error reading MII_DATA\n");
ret = (u16)(val & 0xFFFF);
/* confirm MII not busy */
ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
- check_warn_goto_done(ret, "MII is busy in smsc95xx_mdio_write");
+ check_warn_goto_done(ret, "MII is busy in smsc95xx_mdio_write\n");
val = regval;
ret = __smsc95xx_write_reg(dev, MII_DATA, val, in_pm);
- check_warn_goto_done(ret, "Error writing MII_DATA");
+ check_warn_goto_done(ret, "Error writing MII_DATA\n");
/* set the address, index & direction (write to PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_;
ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
- check_warn_goto_done(ret, "Error writing MII_ADDR");
+ check_warn_goto_done(ret, "Error writing MII_ADDR\n");
ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
- check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx);
+ check_warn_goto_done(ret, "Timed out writing MII reg %02X\n", idx);
done:
mutex_unlock(&dev->phy_mutex);
do {
ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
- check_warn_return(ret, "Error reading E2P_CMD");
+ check_warn_return(ret, "Error reading E2P_CMD\n");
if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
break;
udelay(40);
do {
ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
- check_warn_return(ret, "Error reading E2P_CMD");
+ check_warn_return(ret, "Error reading E2P_CMD\n");
if (!(val & E2P_CMD_BUSY_))
return 0;
for (i = 0; i < length; i++) {
val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
ret = smsc95xx_write_reg(dev, E2P_CMD, val);
- check_warn_return(ret, "Error writing E2P_CMD");
+ check_warn_return(ret, "Error writing E2P_CMD\n");
ret = smsc95xx_wait_eeprom(dev);
if (ret < 0)
return ret;
ret = smsc95xx_read_reg(dev, E2P_DATA, &val);
- check_warn_return(ret, "Error reading E2P_DATA");
+ check_warn_return(ret, "Error reading E2P_DATA\n");
data[i] = val & 0xFF;
offset++;
/* Issue write/erase enable command */
val = E2P_CMD_BUSY_ | E2P_CMD_EWEN_;
ret = smsc95xx_write_reg(dev, E2P_CMD, val);
- check_warn_return(ret, "Error writing E2P_DATA");
+ check_warn_return(ret, "Error writing E2P_DATA\n");
ret = smsc95xx_wait_eeprom(dev);
if (ret < 0)
/* Fill data register */
val = data[i];
ret = smsc95xx_write_reg(dev, E2P_DATA, val);
- check_warn_return(ret, "Error writing E2P_DATA");
+ check_warn_return(ret, "Error writing E2P_DATA\n");
/* Send "write" command */
val = E2P_CMD_BUSY_ | E2P_CMD_WRITE_ | (offset & E2P_CMD_ADDR_);
ret = smsc95xx_write_reg(dev, E2P_CMD, val);
- check_warn_return(ret, "Error writing E2P_CMD");
+ check_warn_return(ret, "Error writing E2P_CMD\n");
ret = smsc95xx_wait_eeprom(dev);
if (ret < 0)
/* Initiate async writes, as we can't wait for completion here */
ret = smsc95xx_write_reg_async(dev, HASHH, &pdata->hash_hi);
- check_warn(ret, "failed to initiate async write to HASHH");
+ check_warn(ret, "failed to initiate async write to HASHH\n");
ret = smsc95xx_write_reg_async(dev, HASHL, &pdata->hash_lo);
- check_warn(ret, "failed to initiate async write to HASHL");
+ check_warn(ret, "failed to initiate async write to HASHL\n");
ret = smsc95xx_write_reg_async(dev, MAC_CR, &pdata->mac_cr);
- check_warn(ret, "failed to initiate async write to MAC_CR");
+ check_warn(ret, "failed to initiate async write to MAC_CR\n");
}
static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
u32 flow, afc_cfg = 0;
int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg);
- check_warn_return(ret, "Error reading AFC_CFG");
+ check_warn_return(ret, "Error reading AFC_CFG\n");
if (duplex == DUPLEX_FULL) {
u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
}
ret = smsc95xx_write_reg(dev, FLOW, flow);
- check_warn_return(ret, "Error writing FLOW");
+ check_warn_return(ret, "Error writing FLOW\n");
ret = smsc95xx_write_reg(dev, AFC_CFG, afc_cfg);
- check_warn_return(ret, "Error writing AFC_CFG");
+ check_warn_return(ret, "Error writing AFC_CFG\n");
return 0;
}
/* clear interrupt status */
ret = smsc95xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
- check_warn_return(ret, "Error reading PHY_INT_SRC");
+ check_warn_return(ret, "Error reading PHY_INT_SRC\n");
ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
- check_warn_return(ret, "Error writing INT_STS");
+ check_warn_return(ret, "Error writing INT_STS\n");
mii_check_media(mii, 1, 1);
mii_ethtool_gset(&dev->mii, &ecmd);
spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
- check_warn_return(ret, "Error writing MAC_CR");
+ check_warn_return(ret, "Error writing MAC_CR\n");
ret = smsc95xx_phy_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
- check_warn_return(ret, "Error updating PHY flow control");
+ check_warn_return(ret, "Error updating PHY flow control\n");
return 0;
}
/* read to clear */
ret = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
- check_warn_return(ret, "Failed to read PHY_INT_SRC during init");
+ check_warn_return(ret, "Failed to read PHY_INT_SRC during init\n");
smsc95xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
PHY_INT_MASK_DEFAULT_);
if (ret < 0)
return ret;
- netif_dbg(dev, ifup, dev->net,
- "MAC Address: %pM\n", dev->net->dev_addr);
+ netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n",
+ dev->net->dev_addr);
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
- netif_dbg(dev, ifup, dev->net,
- "Read Value from HW_CFG : 0x%08x\n", read_buf);
+ netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n",
+ read_buf);
read_buf |= HW_CFG_BIR_;
dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
}
- netif_dbg(dev, ifup, dev->net,
- "rx_urb_size=%ld\n", (ulong)dev->rx_urb_size);
+ netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
+ (ulong)dev->rx_urb_size);
ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
check_warn_return(ret, "Failed to write BURST_CAP: %d\n", ret);
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
- netif_dbg(dev, ifup, dev->net,
- "Read Value from HW_CFG: 0x%08x\n", read_buf);
+ netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG: 0x%08x\n",
+ read_buf);
if (turbo_mode)
read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
/* Enable or disable checksum offload engines */
ret = smsc95xx_set_features(dev->net, dev->net->features);
- check_warn_return(ret, "Failed to set checksum offload features");
+ check_warn_return(ret, "Failed to set checksum offload features\n");
smsc95xx_set_multicast(dev->net);
ret = smsc95xx_phy_initialize(dev);
- check_warn_return(ret, "Failed to init PHY");
+ check_warn_return(ret, "Failed to init PHY\n");
ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
check_warn_return(ret, "Failed to read INT_EP_CTL: %d\n", ret);
check_warn_return(ret, "Failed to write INT_EP_CTL: %d\n", ret);
ret = smsc95xx_start_tx_path(dev);
- check_warn_return(ret, "Failed to start TX path");
+ check_warn_return(ret, "Failed to start TX path\n");
ret = smsc95xx_start_rx_path(dev, 0);
- check_warn_return(ret, "Failed to start RX path");
+ check_warn_return(ret, "Failed to start RX path\n");
netif_dbg(dev, ifup, dev->net, "smsc95xx_reset, return 0\n");
return 0;
struct mii_if_info *mii = &dev->mii;
int ret;
- netdev_dbg(dev->net, "enabling PHY wakeup interrupts");
+ netdev_dbg(dev->net, "enabling PHY wakeup interrupts\n");
/* read to clear */
ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_SRC);
- check_warn_return(ret, "Error reading PHY_INT_SRC");
+ check_warn_return(ret, "Error reading PHY_INT_SRC\n");
/* enable interrupt source */
ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_MASK);
- check_warn_return(ret, "Error reading PHY_INT_MASK");
+ check_warn_return(ret, "Error reading PHY_INT_MASK\n");
ret |= mask;
/* first, a dummy read, needed to latch some MII phys */
ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
- check_warn_return(ret, "Error reading MII_BMSR");
+ check_warn_return(ret, "Error reading MII_BMSR\n");
ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
- check_warn_return(ret, "Error reading MII_BMSR");
+ check_warn_return(ret, "Error reading MII_BMSR\n");
return !!(ret & BMSR_LSTATUS);
}
int ret;
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
- check_warn_return(ret, "Error reading PM_CTRL");
+ check_warn_return(ret, "Error reading PM_CTRL\n");
val &= (~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_));
val |= PM_CTL_SUS_MODE_0;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
- check_warn_return(ret, "Error writing PM_CTRL");
+ check_warn_return(ret, "Error writing PM_CTRL\n");
/* clear wol status */
val &= ~PM_CTL_WUPS_;
val |= PM_CTL_WUPS_ED_;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
- check_warn_return(ret, "Error writing PM_CTRL");
+ check_warn_return(ret, "Error writing PM_CTRL\n");
/* read back PM_CTRL */
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
- check_warn_return(ret, "Error reading PM_CTRL");
+ check_warn_return(ret, "Error reading PM_CTRL\n");
smsc95xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP);
/* enable energy detect power-down mode */
ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_MODE_CTRL_STS);
- check_warn_return(ret, "Error reading PHY_MODE_CTRL_STS");
+ check_warn_return(ret, "Error reading PHY_MODE_CTRL_STS\n");
ret |= MODE_CTRL_STS_EDPWRDOWN_;
/* enter SUSPEND1 mode */
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
- check_warn_return(ret, "Error reading PM_CTRL");
+ check_warn_return(ret, "Error reading PM_CTRL\n");
val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
val |= PM_CTL_SUS_MODE_1;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
- check_warn_return(ret, "Error writing PM_CTRL");
+ check_warn_return(ret, "Error writing PM_CTRL\n");
/* clear wol status, enable energy detection */
val &= ~PM_CTL_WUPS_;
val |= (PM_CTL_WUPS_ED_ | PM_CTL_ED_EN_);
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
- check_warn_return(ret, "Error writing PM_CTRL");
+ check_warn_return(ret, "Error writing PM_CTRL\n");
smsc95xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP);
int ret;
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
- check_warn_return(ret, "Error reading PM_CTRL");
+ check_warn_return(ret, "Error reading PM_CTRL\n");
val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
val |= PM_CTL_SUS_MODE_2;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
- check_warn_return(ret, "Error writing PM_CTRL");
+ check_warn_return(ret, "Error writing PM_CTRL\n");
return 0;
}
int ret;
ret = usbnet_suspend(intf, message);
- check_warn_return(ret, "usbnet_suspend error");
+ check_warn_return(ret, "usbnet_suspend error\n");
/* determine if link is up using only _nopm functions */
link_up = smsc95xx_link_ok_nopm(dev);
*/
if (!(pdata->wolopts & SUPPORTED_WAKE) ||
!(link_up || (pdata->wolopts & WAKE_PHY))) {
- netdev_info(dev->net, "entering SUSPEND2 mode");
+ netdev_info(dev->net, "entering SUSPEND2 mode\n");
/* disable energy detect (link up) & wake up events */
ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val &= ~(WUCSR_MPEN_ | WUCSR_WAKE_EN_);
ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
- check_warn_return(ret, "Error reading PM_CTRL");
+ check_warn_return(ret, "Error reading PM_CTRL\n");
val &= ~(PM_CTL_ED_EN_ | PM_CTL_WOL_EN_);
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
- check_warn_return(ret, "Error writing PM_CTRL");
+ check_warn_return(ret, "Error writing PM_CTRL\n");
return smsc95xx_enter_suspend2(dev);
}
if (pdata->wolopts & WAKE_PHY) {
ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
(PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_LINK_DOWN_));
- check_warn_return(ret, "error enabling PHY wakeup ints");
+ check_warn_return(ret, "error enabling PHY wakeup ints\n");
/* if link is down then configure EDPD and enter SUSPEND1,
* otherwise enter SUSPEND0 below
*/
if (!link_up) {
- netdev_info(dev->net, "entering SUSPEND1 mode");
+ netdev_info(dev->net, "entering SUSPEND1 mode\n");
return smsc95xx_enter_suspend1(dev);
}
}
if (pdata->wolopts & WAKE_BCAST) {
const u8 bcast[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
- netdev_info(dev->net, "enabling broadcast detection");
+ netdev_info(dev->net, "enabling broadcast detection\n");
filter_mask[filter * 4] = 0x003F;
filter_mask[filter * 4 + 1] = 0x00;
filter_mask[filter * 4 + 2] = 0x00;
if (pdata->wolopts & WAKE_MCAST) {
const u8 mcast[] = {0x01, 0x00, 0x5E};
- netdev_info(dev->net, "enabling multicast detection");
+ netdev_info(dev->net, "enabling multicast detection\n");
filter_mask[filter * 4] = 0x0007;
filter_mask[filter * 4 + 1] = 0x00;
filter_mask[filter * 4 + 2] = 0x00;
if (pdata->wolopts & WAKE_ARP) {
const u8 arp[] = {0x08, 0x06};
- netdev_info(dev->net, "enabling ARP detection");
+ netdev_info(dev->net, "enabling ARP detection\n");
filter_mask[filter * 4] = 0x0003;
filter_mask[filter * 4 + 1] = 0x00;
filter_mask[filter * 4 + 2] = 0x00;
}
if (pdata->wolopts & WAKE_UCAST) {
- netdev_info(dev->net, "enabling unicast detection");
+ netdev_info(dev->net, "enabling unicast detection\n");
filter_mask[filter * 4] = 0x003F;
filter_mask[filter * 4 + 1] = 0x00;
filter_mask[filter * 4 + 2] = 0x00;
ret = smsc95xx_write_reg_nopm(dev, WUFF, filter_mask[i]);
if (ret < 0)
kfree(filter_mask);
- check_warn_return(ret, "Error writing WUFF");
+ check_warn_return(ret, "Error writing WUFF\n");
}
kfree(filter_mask);
for (i = 0; i < (wuff_filter_count / 4); i++) {
ret = smsc95xx_write_reg_nopm(dev, WUFF, command[i]);
- check_warn_return(ret, "Error writing WUFF");
+ check_warn_return(ret, "Error writing WUFF\n");
}
for (i = 0; i < (wuff_filter_count / 4); i++) {
ret = smsc95xx_write_reg_nopm(dev, WUFF, offset[i]);
- check_warn_return(ret, "Error writing WUFF");
+ check_warn_return(ret, "Error writing WUFF\n");
}
for (i = 0; i < (wuff_filter_count / 2); i++) {
ret = smsc95xx_write_reg_nopm(dev, WUFF, crc[i]);
- check_warn_return(ret, "Error writing WUFF");
+ check_warn_return(ret, "Error writing WUFF\n");
}
/* clear any pending pattern match packet status */
ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val |= WUCSR_WUFR_;
ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
}
if (pdata->wolopts & WAKE_MAGIC) {
/* clear any pending magic packet status */
ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val |= WUCSR_MPR_;
ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
}
/* enable/disable wakeup sources */
ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
- netdev_info(dev->net, "enabling pattern match wakeup");
+ netdev_info(dev->net, "enabling pattern match wakeup\n");
val |= WUCSR_WAKE_EN_;
} else {
- netdev_info(dev->net, "disabling pattern match wakeup");
+ netdev_info(dev->net, "disabling pattern match wakeup\n");
val &= ~WUCSR_WAKE_EN_;
}
if (pdata->wolopts & WAKE_MAGIC) {
- netdev_info(dev->net, "enabling magic packet wakeup");
+ netdev_info(dev->net, "enabling magic packet wakeup\n");
val |= WUCSR_MPEN_;
} else {
- netdev_info(dev->net, "disabling magic packet wakeup");
+ netdev_info(dev->net, "disabling magic packet wakeup\n");
val &= ~WUCSR_MPEN_;
}
ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
/* enable wol wakeup source */
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
- check_warn_return(ret, "Error reading PM_CTRL");
+ check_warn_return(ret, "Error reading PM_CTRL\n");
val |= PM_CTL_WOL_EN_;
val |= PM_CTL_ED_EN_;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
- check_warn_return(ret, "Error writing PM_CTRL");
+ check_warn_return(ret, "Error writing PM_CTRL\n");
/* enable receiver to enable frame reception */
smsc95xx_start_rx_path(dev, 1);
/* some wol options are enabled, so enter SUSPEND0 */
- netdev_info(dev->net, "entering SUSPEND0 mode");
+ netdev_info(dev->net, "entering SUSPEND0 mode\n");
return smsc95xx_enter_suspend0(dev);
}
/* clear wake-up sources */
ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
- check_warn_return(ret, "Error reading WUCSR");
+ check_warn_return(ret, "Error reading WUCSR\n");
val &= ~(WUCSR_WAKE_EN_ | WUCSR_MPEN_);
ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
- check_warn_return(ret, "Error writing WUCSR");
+ check_warn_return(ret, "Error writing WUCSR\n");
/* clear wake-up status */
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
- check_warn_return(ret, "Error reading PM_CTRL");
+ check_warn_return(ret, "Error reading PM_CTRL\n");
val &= ~PM_CTL_WOL_EN_;
val |= PM_CTL_WUPS_;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
- check_warn_return(ret, "Error writing PM_CTRL");
+ check_warn_return(ret, "Error writing PM_CTRL\n");
}
ret = usbnet_resume(intf);
- check_warn_return(ret, "usbnet_resume error");
+ check_warn_return(ret, "usbnet_resume error\n");
return 0;
}
projects / platform / kernel / linux-rpi.git / commitdiff