gpio: stmpe: enforce device tree only mode
authorLinus Walleij <linus.walleij@linaro.org>
Tue, 13 Jan 2015 07:00:29 +0000 (08:00 +0100)
committerLinus Walleij <linus.walleij@linaro.org>
Tue, 20 Jan 2015 10:03:22 +0000 (11:03 +0100)
Require that device tree be used with STMPE (all platforms use this)
and enforce OF_GPIO, then delete the platform data.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers/gpio/Kconfig
drivers/gpio/gpio-stmpe.c
include/linux/mfd/stmpe.h

index 4187fcb..22b4656 100644 (file)
@@ -644,6 +644,7 @@ config GPIO_SX150X
 config GPIO_STMPE
        bool "STMPE GPIOs"
        depends on MFD_STMPE
+       depends on OF_GPIO
        select GPIOLIB_IRQCHIP
        help
          This enables support for the GPIOs found on the STMPE I/O
index 85c5b19..dabfb99 100644 (file)
@@ -30,7 +30,7 @@ struct stmpe_gpio {
        struct stmpe *stmpe;
        struct device *dev;
        struct mutex irq_lock;
-       unsigned norequest_mask;
+       u32 norequest_mask;
        /* Caches of interrupt control registers for bus_lock */
        u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
        u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
@@ -340,13 +340,10 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 {
        struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
        struct device_node *np = pdev->dev.of_node;
-       struct stmpe_gpio_platform_data *pdata;
        struct stmpe_gpio *stmpe_gpio;
        int ret;
        int irq = 0;
 
-       pdata = stmpe->pdata->gpio;
-
        irq = platform_get_irq(pdev, 0);
 
        stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL);
@@ -360,19 +357,14 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
        stmpe_gpio->chip = template_chip;
        stmpe_gpio->chip.ngpio = stmpe->num_gpios;
        stmpe_gpio->chip.dev = &pdev->dev;
-#ifdef CONFIG_OF
        stmpe_gpio->chip.of_node = np;
-#endif
        stmpe_gpio->chip.base = -1;
 
        if (IS_ENABLED(CONFIG_DEBUG_FS))
                 stmpe_gpio->chip.dbg_show = stmpe_dbg_show;
 
-       if (pdata)
-               stmpe_gpio->norequest_mask = pdata->norequest_mask;
-       else if (np)
-               of_property_read_u32(np, "st,norequest-mask",
-                               &stmpe_gpio->norequest_mask);
+       of_property_read_u32(np, "st,norequest-mask",
+                       &stmpe_gpio->norequest_mask);
 
        if (irq < 0)
                dev_info(&pdev->dev,
@@ -414,9 +406,6 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
                                             NULL);
        }
 
-       if (pdata && pdata->setup)
-               pdata->setup(stmpe, stmpe_gpio->chip.base);
-
        platform_set_drvdata(pdev, stmpe_gpio);
 
        return 0;
@@ -433,15 +422,9 @@ static int stmpe_gpio_remove(struct platform_device *pdev)
 {
        struct stmpe_gpio *stmpe_gpio = platform_get_drvdata(pdev);
        struct stmpe *stmpe = stmpe_gpio->stmpe;
-       struct stmpe_gpio_platform_data *pdata = stmpe->pdata->gpio;
-
-       if (pdata && pdata->remove)
-               pdata->remove(stmpe, stmpe_gpio->chip.base);
 
        gpiochip_remove(&stmpe_gpio->chip);
-
        stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
-
        kfree(stmpe_gpio);
 
        return 0;
index f742b67..c9d8690 100644 (file)
@@ -118,20 +118,6 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
 #define STMPE_GPIO_NOREQ_811_TOUCH     (0xf0)
 
 /**
- * struct stmpe_gpio_platform_data - STMPE GPIO platform data
- * @norequest_mask: bitmask specifying which GPIOs should _not_ be
- *                 requestable due to different usage (e.g. touch, keypad)
- *                 STMPE_GPIO_NOREQ_* macros can be used here.
- * @setup: board specific setup callback.
- * @remove: board specific remove callback
- */
-struct stmpe_gpio_platform_data {
-       unsigned norequest_mask;
-       void (*setup)(struct stmpe *stmpe, unsigned gpio_base);
-       void (*remove)(struct stmpe *stmpe, unsigned gpio_base);
-};
-
-/**
  * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
  * data
  * @sample_time: ADC converstion time in number of clock.
@@ -182,7 +168,6 @@ struct stmpe_ts_platform_data {
  * @irq_over_gpio: true if gpio is used to get irq
  * @irq_gpio: gpio number over which irq will be requested (significant only if
  *           irq_over_gpio is true)
- * @gpio: GPIO-specific platform data
  * @ts: touchscreen-specific platform data
  */
 struct stmpe_platform_data {
@@ -194,7 +179,6 @@ struct stmpe_platform_data {
        int irq_gpio;
        int autosleep_timeout;
 
-       struct stmpe_gpio_platform_data *gpio;
        struct stmpe_ts_platform_data *ts;
 };