* This driver also supports the G781 from GMT. This device is compatible
* with the ADM1032.
*
+ * This driver also supports TMP451 from Texas Instruments. This device is
+ * supported in both compatibility and extended mode. It's mostly compatible
+ * with ADT7461 except for local temperature low byte register and max
+ * conversion rate.
+ *
* Since the LM90 was the first chipset supported by this driver, most
* comments will refer to this chipset, but are actually general and
* concern all supported chipsets, unless mentioned otherwise.
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
- max6646, w83l771, max6696, sa56004, g781 };
+ max6646, w83l771, max6696, sa56004, g781, tmp451 };
/*
* The LM90 registers
#define LM90_DEF_CONVRATE_RVAL 6 /* Def conversion rate register value */
#define LM90_MAX_CONVRATE_MS 16000 /* Maximum conversion rate in ms */
+/* TMP451 registers */
+#define TMP451_REG_R_LOCAL_TEMPL 0x15
+
/*
* Device flags
*/
{ "nct1008", adt7461 },
{ "w83l771", w83l771 },
{ "sa56004", sa56004 },
+ { "tmp451", tmp451 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm90_id);
.max_convrate = 9,
.reg_local_ext = SA56004_REG_R_LOCAL_TEMPL,
},
+ [tmp451] = {
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+ | LM90_HAVE_BROKEN_ALERT,
+ .alert_alarms = 0x7c,
+ .max_convrate = 9,
+ .reg_local_ext = TMP451_REG_R_LOCAL_TEMPL,
+ }
};
/*
struct lm90_data *data = lm90_update_device(dev);
int temp;
- if (data->kind == adt7461)
+ if (data->kind == adt7461 || data->kind == tmp451)
temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
else if (data->kind == max6646)
temp = temp_from_u8(data->temp8[attr->index]);
val -= 16000;
mutex_lock(&data->update_lock);
- if (data->kind == adt7461)
+ if (data->kind == adt7461 || data->kind == tmp451)
data->temp8[nr] = temp_to_u8_adt7461(data, val);
else if (data->kind == max6646)
data->temp8[nr] = temp_to_u8(val);
struct lm90_data *data = lm90_update_device(dev);
int temp;
- if (data->kind == adt7461)
+ if (data->kind == adt7461 || data->kind == tmp451)
temp = temp_from_u16_adt7461(data, data->temp11[attr->index]);
else if (data->kind == max6646)
temp = temp_from_u16(data->temp11[attr->index]);
val -= 16000;
mutex_lock(&data->update_lock);
- if (data->kind == adt7461)
+ if (data->kind == adt7461 || data->kind == tmp451)
data->temp11[index] = temp_to_u16_adt7461(data, val);
else if (data->kind == max6646)
data->temp11[index] = temp_to_u8(val) << 8;
struct lm90_data *data = lm90_update_device(dev);
int temp;
- if (data->kind == adt7461)
+ if (data->kind == adt7461 || data->kind == tmp451)
temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
else if (data->kind == max6646)
temp = temp_from_u8(data->temp8[attr->index]);
return err;
mutex_lock(&data->update_lock);
- if (data->kind == adt7461)
+ if (data->kind == adt7461 || data->kind == tmp451)
temp = temp_from_u8_adt7461(data, data->temp8[LOCAL_CRIT]);
else if (data->kind == max6646)
temp = temp_from_u8(data->temp8[LOCAL_CRIT]);
&& (config1 & 0x3F) == 0x00
&& convrate <= 0x08)
name = "g781";
+ } else
+ if (address == 0x4C
+ && man_id == 0x55) { /* Texas Instruments */
+ int local_ext;
+
+ local_ext = i2c_smbus_read_byte_data(client,
+ TMP451_REG_R_LOCAL_TEMPL);
+
+ if (chip_id == 0x00 /* TMP451 */
+ && (config1 & 0x1B) == 0x00
+ && convrate <= 0x09
+ && (local_ext & 0x0F) == 0x00)
+ name = "tmp451";
}
if (!name) { /* identification failed */
data->config_orig = config;
/* Check Temperature Range Select */
- if (data->kind == adt7461) {
+ if (data->kind == adt7461 || data->kind == tmp451) {
if (config & 0x04)
data->flags |= LM90_FLAG_ADT7461_EXT;
}