/ {
lcd{
- compatible = "amlogic, sm1";
+ compatible = "amlogic, lcd-sm1";
dev_name = "lcd";
mode = "tablet";
status = "okay";
* power value:(0=output low, 1=output high, 2=input)
* power delay:(unit in ms)
*/
- lcd_cpu-gpios = <&gpio GPIOZ_9 GPIO_ACTIVE_HIGH
- &gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
- lcd_cpu_gpio_names = "GPIOZ_9","GPIOZ_8";
+ lcd_cpu-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH
+ &gpio GPIOH_7 GPIO_ACTIVE_HIGH>;
+ lcd_cpu_gpio_names = "GPIOH_4","GPIOH_7";
lcd_0{
model_name = "B080XAN01";
0xff 0 0 0>;
backlight_index = <0>;
};
+ lcd_7{
+ model_name = "EK79007";
+ interface = "mipi";
+ basic_setting = <1024 600 /*h_active, v_active*/
+ 1354 636 /*h_period, v_period*/
+ 8 /*lcd_bits*/
+ 119 80>; /*screen_widht, screen_height*/
+ lcd_timing = <10 160 0 /*hs_width,hs_bp,hs_pol*/
+ 1 23 0>; /*vs_width,vs_bp,vs_pol*/
+ clk_attr = <0 /*fr_adj_type(0=clock,1=htotal,2=vtotal)*/
+ 0 /*clk_ss_level*/
+ 1 /*clk_auto_generate*/
+ 51668640>; /*pixel_clk(unit in Hz)*/
+ mipi_attr = <4 /*lane_num*/
+ 1000 /*bit_rate_max(MHz)*/
+ 0 /*factor(*100, default 0 for auto)*/
+ 1 /*operation_mode_init(0=video, 1=command)*/
+ 0 /*operation_mode_display(0=video, 1=command)*/
+ 2 /*
+ *video_mode_type
+ *(0=sync_pulse,1=sync_event,2=burst)
+ */
+ 1 /*clk_always_hs(0=disable,1=enable)*/
+ 0>; /*phy_switch(0=auto,1=standard,2=slow)*/
+ /* dsi_init: data_type, num, data... */
+ dsi_init_on = <0xff 0xff>; /* ending flag */
+ dsi_init_off = <0xff 0xff>; /* ending flag */
+ /* extern_init: 0xff for invalid */
+ extern_init = <6>;
+ /* power step: type,index,value,delay(ms) */
+ power_on_step = <
+ 0 0 1 10
+ 0 1 0 100
+ 0 0 0 200
+ 0 1 1 100
+ 2 0 0 100
+ 0xff 0 0 0>;
+ power_off_step = <
+ 2 0 0 0
+ 0 1 0 100
+ 0 0 1 100
+ 0xff 0 0 0>;
+ backlight_index = <0>;
+ };
};
lcd_extern{
0xff 150 /* delay 150ms */
0xff 0xff>; /*ending*/
};
+ extern_6{
+ index = <6>;
+ extern_name = "mipi_default"; /* LD055LF1 */
+ status = "okay";
+ type = <2>; /* 0=i2c, 1=spi, 2=mipi */
+ cmd_size = <0xff>;
+ init_on = <
+ 0x15 2 0x80 0xAC
+ 0x15 2 0x81 0xB8
+ 0x15 2 0x82 0x09
+ 0x15 2 0x83 0x78
+ 0x15 2 0x84 0x7F
+ 0x15 2 0x85 0xBB
+ 0x15 2 0x86 0x70
+ 0xff 40
+ 0xff 0xff>; /*ending*/
+ init_off = <
+ 0xff 200 /* delay 50ms */
+ 0xff 0xff>; /*ending*/
+ };
};
backlight{
dev_name = "backlight";
status = "okay";
key_valid = <0>;
- pinctrl-names = "pwm_on","pwm_off";
+ pinctrl-names = "pwm_on";
pinctrl-0 = <&pwm_f_pins2>;
- pinctrl-1 = <&bl_pwm_off_pins>;
pinctrl_version = <2>; /* for uboot */
bl_pwm_config = <&bl_pwm_conf>;
- bl-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH
- &gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
- bl_gpio_names = "GPIOH_4","GPIOH_5";
+ bl-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+ bl_gpio_names = "GPIOH_5";
/* pwm port: PWM_A, PWM_B, PWM_C, PWM_D, PWM_E, PWM_F, PWM_VS*/
/* power index:(point gpios_index, 0xff=invalid)
bl_level_attr = <255 10 /*max, min*/
128 128>; /*mid, mid_mapping*/
bl_ctrl_method = <1>; /* 1=pwm, 2=pwm_combo, 4=extern */
- bl_power_attr = <0 /*en_gpio_index*/
- 1 0 /*on_value, off_value*/
- 200 200>; /*on_delay(ms), off_delay(ms)*/
+ //bl_power_attr = <0 /*en_gpio_index*/
+ // 1 0 /*on_value, off_value*/
+ // 200 200>; /*on_delay(ms), off_delay(ms)*/
bl_pwm_port = "PWM_F";
- bl_pwm_attr = <0 /*pwm_method*/
- 180 /*pwm_freq(pwm:Hz, pwm_vs:multiple of vs)*/
+ bl_pwm_attr = <1 /*pwm_method*/
+ /*pwm_freq(pwm:Hz, pwm_vs:multiple of vs)*/
+ 25000
100 25>; /*duty_max(%), duty_min(%)*/
- bl_pwm_power = <1 1 /*pwm_gpio_index, pwm_gpio_off*/
+ bl_pwm_power = <0 0 /*pwm_gpio_index, pwm_gpio_off*/
10 10>; /*pwm_on_delay(ms), pwm_off_delay(ms)*/
bl_pwm_en_sequence_reverse = <0>; /* 1 for reverse */
};
interrupt-names = "irq_spdifin";
pinctrl-names = "spdif_pins";
- pinctrl-0 = <&spdifout &spdifin>;
+ pinctrl-0 = <&spdifout>; /* bob remove &spdifin*/
status = "okay";
};
};
};
- spdifin: spdifin {
- mux {/* GPIOH_5 */
- groups = "spdif_in_h";
- function = "spdif_in";
- };
- };
+ /* GPIOH_5 */
+ /* bob remove spdifin
+ *spdifin: spdifin {
+ * mux {/* GPIOH_5
+ * groups = "spdif_in_h";
+ * function = "spdif_in";
+ * };
+ *};
+ */
pdmin: pdmin {
mux { /* GPIOA_5, GPIOA_6, GPIOA_8, GPIOA_9, GPIOA_7 */
};
};
- bl_pwm_off_pins:bl_pwm_off_pin {
- mux {
- pins = "GPIOH_5";
- function = "gpio_periphs";
- output-high;
- };
- };
+ /*
+ *bl_pwm_off_pins:bl_pwm_off_pin {
+ * mux {
+ * pins = "GPIOH_5";
+ * function = "gpio_periphs";
+ * output-high;
+ * };
+ *};
+ */
clk12_24_z_pins:clk12_24_z_pins {
mux {
interrupt-names = "irq_spdifin";
pinctrl-names = "spdif_pins";
- pinctrl-0 = <&spdifout &spdifin>;
+ pinctrl-0 = <&spdifout>;/* bob remove &spdifin*/
status = "okay";
};
};
};
- spdifin: spdifin {
- mux {/* GPIOH_5 */
- groups = "spdif_in_h";
- function = "spdif_in";
- };
- };
+ /*GPIOH_5 */
+ /*bob remove spdifin
+ *spdifin: spdifin {
+ * mux {/* GPIOH_5
+ * groups = "spdif_in_h";
+ * function = "spdif_in";
+ * };
+ *};
+ */
pdmin: pdmin {
mux { /* GPIOA_5, GPIOA_6, GPIOA_8, GPIOA_9, GPIOA_7 */
};
};
- bl_pwm_off_pins:bl_pwm_off_pin {
- mux {
- pins = "GPIOH_5";
- function = "gpio_periphs";
- output-high;
- };
- };
+ /*
+ *bl_pwm_off_pins:bl_pwm_off_pin {
+ * mux {
+ * pins = "GPIOH_5";
+ * function = "gpio_periphs";
+ * output-high;
+ * };
+ *};
+ */
clk12_24_z_pins:clk12_24_z_pins {
mux {
/*
+ * arch/arm64/boot/dts/amlogic/mesonsm1_skt-panel.dtsi
*
- * Copyright (C) 2019 Amlogic, Inc. All rights reserved.
+ * Copyright (C) 2016 Amlogic, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
*
*/
* power value:(0=output low, 1=output high, 2=input)
* power delay:(unit in ms)
*/
- lcd_cpu-gpios = <&gpio GPIOZ_9 GPIO_ACTIVE_HIGH
- &gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
- lcd_cpu_gpio_names = "GPIOZ_9","GPIOZ_8";
+ lcd_cpu-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH
+ &gpio GPIOH_7 GPIO_ACTIVE_HIGH>;
+ lcd_cpu_gpio_names = "GPIOH_4","GPIOH_7";
lcd_0{
model_name = "B080XAN01";
0xff 0 0 0>;
backlight_index = <0>;
};
+ lcd_7{
+ model_name = "EK79007";
+ interface = "mipi";
+ basic_setting = <1024 600 /*h_active, v_active*/
+ 1354 636 /*h_period, v_period*/
+ 8 /*lcd_bits*/
+ 119 80>; /*screen_widht, screen_height*/
+ lcd_timing = <10 160 0 /*hs_width,hs_bp,hs_pol*/
+ 1 23 0>; /*vs_width,vs_bp,vs_pol*/
+ clk_attr = <0 /*fr_adj_type(0=clock,1=htotal,2=vtotal)*/
+ 0 /*clk_ss_level*/
+ 1 /*clk_auto_generate*/
+ 51668640>; /*pixel_clk(unit in Hz)*/
+ mipi_attr = <4 /*lane_num*/
+ 1000 /*bit_rate_max(MHz)*/
+ 0 /*factor(*100, default 0 for auto)*/
+ 1 /*operation_mode_init(0=video, 1=command)*/
+ 0 /*operation_mode_display(0=video, 1=command)*/
+ 2 /*
+ *video_mode_type
+ *(0=sync_pulse,1=sync_event,2=burst)
+ */
+ 1 /*clk_always_hs(0=disable,1=enable)*/
+ 0>; /*phy_switch(0=auto,1=standard,2=slow)*/
+ /* dsi_init: data_type, num, data... */
+ dsi_init_on = <0xff 0xff>; /* ending flag */
+ dsi_init_off = <0xff 0xff>; /* ending flag */
+ /* extern_init: 0xff for invalid */
+ extern_init = <6>;
+ /* power step: type,index,value,delay(ms) */
+ power_on_step = <
+ 0 0 1 10
+ 0 1 0 100
+ 0 0 0 200
+ 0 1 1 100
+ 2 0 0 100
+ 0xff 0 0 0>;
+ power_off_step = <
+ 2 0 0 0
+ 0 1 0 100
+ 0 0 1 100
+ 0xff 0 0 0>;
+ backlight_index = <0>;
+ };
};
lcd_extern{
0xfd 1 150 /* delay 150ms */
0xff 0>; /*ending*/
};
+ extern_6{
+ index = <6>;
+ extern_name = "mipi_default"; /* LD055LF1 */
+ status = "okay";
+ type = <2>; /* 0=i2c, 1=spi, 2=mipi */
+ cmd_size = <0xff>;
+ init_on = <
+ 0x15 2 0x80 0xAC
+ 0x15 2 0x81 0xB8
+ 0x15 2 0x82 0x09
+ 0x15 2 0x83 0x78
+ 0x15 2 0x84 0x7F
+ 0x15 2 0x85 0xBB
+ 0x15 2 0x86 0x70
+ 0xff 40
+ 0xff 0xff>; /*ending*/
+ init_off = <
+ 0xff 200 /* delay 50ms */
+ 0xff 0xff>; /*ending*/
+ };
};
backlight{
compatible = "amlogic, backlight-sm1";
status = "okay";
key_valid = <0>;
- pinctrl-names = "pwm_on","pwm_off";
+ pinctrl-names = "pwm_on";
pinctrl-0 = <&pwm_f_pins2>;
- pinctrl-1 = <&bl_pwm_off_pins>;
pinctrl_version = <2>; /* for uboot */
bl_pwm_config = <&bl_pwm_conf>;
- bl-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH
- &gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
- bl_gpio_names = "GPIOH_4","GPIOH_5";
+ bl-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+ bl_gpio_names = "GPIOH_5";
/* pwm port: PWM_A, PWM_B, PWM_C, PWM_D, PWM_E, PWM_F, PWM_VS*/
/* power index:(point gpios_index, 0xff=invalid)
bl_level_attr = <255 10 /*max, min*/
128 128>; /*mid, mid_mapping*/
bl_ctrl_method = <1>; /* 1=pwm, 2=pwm_combo, 4=extern */
- bl_power_attr = <0 /*en_gpio_index*/
- 1 0 /*on_value, off_value*/
- 200 200>; /*on_delay(ms), off_delay(ms)*/
+ //bl_power_attr = <0 /*en_gpio_index*/
+ // 1 0 /*on_value, off_value*/
+ // 200 200>; /*on_delay(ms), off_delay(ms)*/
bl_pwm_port = "PWM_F";
- bl_pwm_attr = <0 /*pwm_method*/
- 180 /*pwm_freq(pwm:Hz, pwm_vs:multiple of vs)*/
+ bl_pwm_attr = <1 /*pwm_method*/
+ /*180pwm_freq(pwm:Hz, pwm_vs:multiple of vs)*/
+ 25000
100 25>; /*duty_max(%), duty_min(%)*/
- bl_pwm_power = <1 1 /*pwm_gpio_index, pwm_gpio_off*/
+ bl_pwm_power = <0 0 /*pwm_gpio_index, pwm_gpio_off*/
10 10>; /*pwm_on_delay(ms), pwm_off_delay(ms)*/
bl_pwm_en_sequence_reverse = <0>; /* 1 for reverse */
};
};
};
- spdifin: spdifin {
- mux {/* GPIOH_5 */
- groups = "spdif_in_h";
- function = "spdif_in";
- };
- };
+ /*GPIOH_5 */
+ /*bob remove spdifin
+ *spdifin: spdifin {
+ * mux {/* GPIOH_5
+ * groups = "spdif_in_h";
+ * function = "spdif_in";
+ * };
+ *};
+ */
pdmin: pdmin {
mux { /* GPIOA_5, GPIOA_6, GPIOA_8, GPIOA_9, GPIOA_7 */
};
};
- bl_pwm_off_pins:bl_pwm_off_pin {
- mux {
- pins = "GPIOH_5";
- function = "gpio_periphs";
- output-high;
- };
- };
+ /*
+ *bl_pwm_off_pins:bl_pwm_off_pin {
+ * mux {
+ * pins = "GPIOH_5";
+ * function = "gpio_periphs";
+ * output-high;
+ * };
+ *};
+ */
clk12_24_z_pins:clk12_24_z_pins {
mux {
};
};
- spdifin: spdifin {
- mux {/* GPIOH_5 */
- groups = "spdif_in_h";
- function = "spdif_in";
- };
- };
+ /*GPIOH_5 */
+ /*bob remove spdifin
+ *spdifin: spdifin {
+ * mux {/* GPIOH_5
+ * groups = "spdif_in_h";
+ * function = "spdif_in";
+ * };
+ *};
+ */
pdmin: pdmin {
mux { /* GPIOA_5, GPIOA_6, GPIOA_8, GPIOA_9, GPIOA_7 */
};
};
- bl_pwm_off_pins:bl_pwm_off_pin {
- mux {
- pins = "GPIOH_5";
- function = "gpio_periphs";
- output-high;
- };
- };
+ /*
+ *bl_pwm_off_pins:bl_pwm_off_pin {
+ * mux {
+ * pins = "GPIOH_5";
+ * function = "gpio_periphs";
+ * output-high;
+ * };
+ *};
+ */
clk12_24_z_pins:clk12_24_z_pins {
mux {
projects / platform / kernel / linux-amlogic.git / commitdiff