ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF

7" OF is a capacitive touch 7" Open Frame panel solutions with
- 7" AUO B101AW03 LVDS panel
- EDT, FT5526 Touch

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.

MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.

Add support for it.

Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
Signed-off-by: Francesco Utel <francesco.utel@engicam.com>
Signed-off-by: Mirko Ardinghi <mirko.ardinghi@engicam.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cf38da2..609712a 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1077,6 +1077,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
        stm32mp157a-dk1.dtb \
        stm32mp157a-iot-box.dtb \
        stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
+       stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
        stm32mp157a-stinger96.dtb \
        stm32mp157c-dhcom-pdk2.dtb \
        stm32mp157c-dhcom-picoitx.dtb \

diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
new file mode 100644 (file)
index 0000000..674b2d3
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-microgea-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 7\" Open Frame";
+       compatible = "engicam,microgea-stm32mp1-microdev2.0-of7",
+                    "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+       aliases {
+               serial0 = &uart4;
+               serial1 = &uart8;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       backlight: backlight {
+               compatible = "gpio-backlight";
+               gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+               default-on;
+       };
+
+       lcd_3v3: regulator-lcd-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "lcd_3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&gpiof 10 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-always-on;
+               power-supply = <&panel_pwr>;
+       };
+
+       panel_pwr: regulator-panel-pwr {
+               compatible = "regulator-fixed";
+               regulator-name = "panel_pwr";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&gpiob 10 GPIO_ACTIVE_HIGH>;
+               regulator-always-on;
+       };
+
+       panel {
+               compatible = "auo,b101aw03";
+               backlight = <&backlight>;
+               enable-gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
+               power-supply = <&lcd_3v3>;
+
+               port {
+                       panel_in: endpoint {
+                               remote-endpoint = <&ltdc_ep0_out>;
+                       };
+               };
+       };
+};
+
+&i2c2 {
+       i2c-scl-falling-time-ns = <20>;
+       i2c-scl-rising-time-ns = <185>;
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&i2c2_pins_a>;
+       pinctrl-1 = <&i2c2_sleep_pins_a>;
+       status = "okay";
+};
+
+&ltdc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ltdc_pins>;
+       status = "okay";
+
+       port {
+               ltdc_ep0_out: endpoint@0 {
+                       reg = <0>;
+                       remote-endpoint = <&panel_in>;
+               };
+       };
+};
+
+&pinctrl {
+       ltdc_pins: ltdc {
+               pins {
+                       pinmux = <STM32_PINMUX('G', 10, AF14)>, /* LTDC_B2 */
+                                <STM32_PINMUX('H', 12, AF14)>, /* LTDC_R6 */
+                                <STM32_PINMUX('H', 11, AF14)>, /* LTDC_R5 */
+                                <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
+                                <STM32_PINMUX('D', 9, AF14)>,  /* LTDC_B0 */
+                                <STM32_PINMUX('E', 5, AF14)>,  /* LTDC_G0 */
+                                <STM32_PINMUX('E', 6, AF14)>,  /* LTDC_G1 */
+                                <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
+                                <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
+                                <STM32_PINMUX('G', 7, AF14)>,  /* LTDC_CLK */
+                                <STM32_PINMUX('G', 12, AF14)>, /* LTDC_B1 */
+                                <STM32_PINMUX('H', 2, AF14)>,  /* LTDC_R0 */
+                                <STM32_PINMUX('H', 3, AF14)>,  /* LTDC_R1 */
+                                <STM32_PINMUX('H', 8, AF14)>,  /* LTDC_R2 */
+                                <STM32_PINMUX('H', 9, AF14)>,  /* LTDC_R3 */
+                                <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
+                                <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
+                                <STM32_PINMUX('H', 14, AF14)>, /* LTDC_G3 */
+                                <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
+                                <STM32_PINMUX('I', 0, AF14)>,  /* LTDC_G5 */
+                                <STM32_PINMUX('I', 1, AF14)>,  /* LTDC_G6 */
+                                <STM32_PINMUX('I', 2, AF14)>,  /* LTDC_G7 */
+                                <STM32_PINMUX('I', 4, AF14)>,  /* LTDC_B4 */
+                                <STM32_PINMUX('I', 5, AF14)>,  /* LTDC_B5 */
+                                <STM32_PINMUX('B', 8, AF14)>,  /* LTDC_B6 */
+                                <STM32_PINMUX('I', 7, AF14)>,  /* LTDC_B7 */
+                                <STM32_PINMUX('I', 9, AF14)>,  /* LTDC_VSYNC */
+                                <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
+                       bias-disable;
+                       drive-push-pull;
+                       slew-rate = <3>;
+               };
+       };
+};
+
+&sdmmc1 {
+       bus-width = <4>;
+       disable-wp;
+       pinctrl-names = "default", "opendrain", "sleep";
+       pinctrl-0 = <&sdmmc1_b4_pins_a>;
+       pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+       pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+       st,neg-edge;
+       vmmc-supply = <&vdd>;
+       status = "okay";
+};
+
+&uart4 {
+       pinctrl-names = "default", "sleep", "idle";
+       pinctrl-0 = <&uart4_pins_a>;
+       pinctrl-1 = <&uart4_sleep_pins_a>;
+       pinctrl-2 = <&uart4_idle_pins_a>;
+       status = "okay";
+};
+
+/* J31: RS323 */
+&uart8 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart8_pins_a>;
+       status = "okay";
+};