mtd: nand: add a helper to check the SLC/MLC nand chip
authorHuang Shijie <b32955@freescale.com>
Wed, 25 Sep 2013 06:58:10 +0000 (14:58 +0800)
committerBrian Norris <computersforpeace@gmail.com>
Sun, 27 Oct 2013 23:27:04 +0000 (16:27 -0700)
Add a helper to check if a nand chip is SLC or MLC.
This helper makes the code more readable.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
drivers/mtd/nand/denali.c
drivers/mtd/nand/nand_base.c
include/linux/mtd/nand.h

index 154b033..370b9dd 100644 (file)
@@ -1520,7 +1520,7 @@ int denali_init(struct denali_nand_info *denali)
         * so just let controller do 15bit ECC for MLC and 8bit ECC for
         * SLC if possible.
         * */
-       if (denali->nand.cellinfo & NAND_CI_CELLTYPE_MSK &&
+       if (!nand_is_slc(&denali->nand) &&
                        (denali->mtd.oobsize > (denali->bbtskipbytes +
                        ECC_15BITS * (denali->mtd.writesize /
                        ECC_SECTOR_SIZE)))) {
index 0b39d0c..6ea6627 100644 (file)
@@ -3108,8 +3108,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
         * ID to decide what to do.
         */
        if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
-                       (chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
-                       id_data[5] != 0x00) {
+                       !nand_is_slc(chip) && id_data[5] != 0x00) {
                /* Calc pagesize */
                mtd->writesize = 2048 << (extid & 0x03);
                extid >>= 2;
@@ -3141,7 +3140,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
                        (((extid >> 1) & 0x04) | (extid & 0x03));
                *busw = 0;
        } else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX &&
-                       (chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
+                       !nand_is_slc(chip)) {
                unsigned int tmp;
 
                /* Calc pagesize */
@@ -3204,7 +3203,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
                 * - ID byte 5, bit[7]:    1 -> BENAND, 0 -> raw SLC
                 */
                if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA &&
-                               !(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+                               nand_is_slc(chip) &&
                                (id_data[5] & 0x7) == 0x6 /* 24nm */ &&
                                !(id_data[4] & 0x80) /* !BENAND */) {
                        mtd->oobsize = 32 * mtd->writesize >> 9;
@@ -3265,11 +3264,11 @@ static void nand_decode_bbm_options(struct mtd_info *mtd,
         * Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba,
         * AMD/Spansion, and Macronix.  All others scan only the first page.
         */
-       if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+       if (!nand_is_slc(chip) &&
                        (maf_id == NAND_MFR_SAMSUNG ||
                         maf_id == NAND_MFR_HYNIX))
                chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
-       else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+       else if ((nand_is_slc(chip) &&
                                (maf_id == NAND_MFR_SAMSUNG ||
                                 maf_id == NAND_MFR_HYNIX ||
                                 maf_id == NAND_MFR_TOSHIBA ||
@@ -3745,8 +3744,7 @@ int nand_scan_tail(struct mtd_info *mtd)
        chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
 
        /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
-       if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
-           !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) {
+       if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
                switch (chip->ecc.steps) {
                case 2:
                        mtd->subpage_sft = 1;
index 1295481..5c05bab 100644 (file)
@@ -795,4 +795,13 @@ static inline int onfi_get_sync_timing_mode(struct nand_chip *chip)
        return le16_to_cpu(chip->onfi_params.src_sync_timing_mode);
 }
 
+/*
+ * Check if it is a SLC nand.
+ * The !nand_is_slc() can be used to check the MLC/TLC nand chips.
+ * We do not distinguish the MLC and TLC now.
+ */
+static inline bool nand_is_slc(struct nand_chip *chip)
+{
+       return !(chip->cellinfo & NAND_CI_CELLTYPE_MSK);
+}
 #endif /* __LINUX_MTD_NAND_H */