+++ /dev/null
--------------------------------------------------------------------
-Fri Sep 21 11:55:12 UTC 2012 - froh@suse.com
-
-- fix coreutils-8.9-singlethreaded-sort.patch to
- respect OMP_NUM_THREADS again.
-
--------------------------------------------------------------------
-Tue Jun 19 12:37:47 CEST 2012 - pth@suse.de
-
-- Update to 8.17:
- ** Bug fixes
-
- * stat no longer reports a negative file size as a huge positive
- number. [bug present since 'stat' was introduced in
- fileutils-4.1.9]
-
- ** New features
-
- * split and truncate now allow any seekable files in situations
- where the file size is needed, instead of insisting on regular
- files.
-
- * fmt now accepts the --goal=WIDTH (-g) option.
-
- * stat -f recognizes new file system types: bdevfs, inodefs, qnx6
-
- ** Changes in behavior
-
- * cp,mv,install,cat,split: now read and write a minimum of 64KiB at
- a time. This was previously 32KiB and increasing to 64KiB was
- seen to increase throughput by about 10% when reading cached
- files on 64 bit GNU/Linux.
-
- * cp --attributes-only no longer truncates any existing destination
- file, allowing for more general copying of attributes from one
- file to another.
-- Bring german message catalog up-to-date
-
--------------------------------------------------------------------
-Tue May 15 22:34:03 UTC 2012 - schwab@linux-m68k.org
-
-- Build factor with gmp support
-
--------------------------------------------------------------------
-Mon May 7 14:22:29 CEST 2012 - pth@suse.de
-
-- Two new upstream patches:
-
- * id and groups, when invoked with no user name argument, would
- print the default group ID listed in the password database, and
- sometimes that ID would be neither real nor effective. For
- example, when run set-GID, or in a session for which the default
- group has just been changed, the new group ID would be listed,
- even though it is not yet effective.
-
- * 'cp S D' is no longer subject to a race: if an existing D were
- removed between the initial stat and subsequent
- open-without-O_CREAT, cp would fail with a confusing diagnostic
- saying that the destination, D, was not found. Now, in this
- unusual case, it retries the open (but with O_CREAT), and hence
- usually succeeds. With NFS attribute caching, the condition was
- particularly easy to trigger, since there, the removal of D could
- precede the initial stat. [This bug was present in "the
- beginning".] (bnc#760926).
-
--------------------------------------------------------------------
-Fri Apr 27 12:38:23 CEST 2012 - pth@suse.de
-
-- Make stdbuf binary find libstdbuf.so by looking in the right
- path (bnc#741241).
-
--------------------------------------------------------------------
-Mon Apr 16 13:23:56 CEST 2012 - pth@suse.de
-
-- Update to 8.16:
-
- - Improvements:
- * As a GNU extension, 'chmod', 'mkdir', and 'install' now accept
- operators '-', '+', '=' followed by octal modes;
- * Also, ordinary numeric modes with five or more digits no longer
- preserve setuid and setgid bits, so that 'chmod 00755 FOO' now
- clears FOO's setuid and setgid bits.
- * dd now accepts the count_bytes, skip_bytes iflags and the
- seek_bytes oflag, to more easily allow processing portions of a
- file.
- * dd now accepts the conv=sparse flag to attempt to create sparse
- output, by seeking rather than writing to the output file.
- * ln now accepts the --relative option, to generate a relative
- symbolic link to a target, irrespective of how the target is
- specified.
- * split now accepts an optional "from" argument to
- --numeric-suffixes, which changes the start number from the
- default of 0.
- * split now accepts the --additional-suffix option, to append an
- additional static suffix to output file names.
- * basename now supports the -a and -s options, which allow
- processing of more than one argument at a time. Also the
- complementary -z option was added to delimit output items with
- the NUL character.
- * dirname now supports more than one argument. Also the complementary
- z option was added to delimit output items with the NUL character.
-
- - Bug fixes
- * du --one-file-system (-x) would ignore any non-directory
- specified on the command line. For example, "touch f; du -x f"
- would print nothing. [bug introduced in coreutils-8.15]
- * mv now lets you move a symlink onto a same-inode destination
- file that has two or more hard links.
- * "mv A B" could succeed, yet A would remain.
- * realpath no longer mishandles a root directory.
-
- - Improvements
- * ls can be much more efficient, especially with large directories
- on file systems for which getfilecon-, ACL-check- and XATTR-
- check-induced syscalls fail with ENOTSUP or similar.
- * 'realpath --relative-base=dir' in isolation now implies
- '--relative-to=dir' instead of causing a usage failure.
- * split now supports an unlimited number of split files as default
- behavior.
-
- For a detaild list se NEWS in the documentation.
-
-- Add up-to-date german translation.
-
--------------------------------------------------------------------
-Mon Apr 16 12:00:34 CEST 2012 - pth@suse.de
-
-- Add two upstream patches that speed up ls (bnc#752943):
- * Cache (l)getfilecon calls to avoid the vast majority of the failing
- underlying getxattr syscalls.
- * Avoids always-failing queries for whether a file has a nontrivial
- ACL and for whether a file has certain "capabilities".
-
--------------------------------------------------------------------
-Fri Mar 9 17:30:19 CET 2012 - pth@suse.de
-
-- Update to 8.15:
- ** New programs
-
- realpath: print resolved file names.
-
- ** Bug fixes
-
- du --one-file-system (-x) would ignore any non-directory specified on
- the command line. For example, "touch f; du -x f" would print nothing.
- [bug introduced in coreutils-8.14]
-
- du -x no longer counts root directories of other file systems.
- [bug introduced in coreutils-5.1.0]
-
- ls --color many-entry-directory was uninterruptible for too long
- [bug introduced in coreutils-5.2.1]
-
- ls's -k option no longer affects how ls -l outputs file sizes.
- It now affects only the per-directory block counts written by -l,
- and the sizes written by -s. This is for compatibility with BSD
- and with POSIX 2008. Because -k is no longer equivalent to
- --block-size=1KiB, a new long option --kibibyte stands for -k.
- [bug introduced in coreutils-4.5.4]
-
- ls -l would leak a little memory (security context string) for each
- nonempty directory listed on the command line, when using SELinux.
- [bug probably introduced in coreutils-6.10 with SELinux support]
-
- split -n 1/2 FILE no longer fails when operating on a growing file, or
- (on some systems) when operating on a non-regular file like /dev/zero.
- It would report "/dev/zero: No such file or directory" even though
- the file obviously exists. Same for -n l/2.
- [bug introduced in coreutils-8.8, with the addition of the -n option]
-
- stat -f now recognizes the FhGFS and PipeFS file system types.
-
- tac no longer fails to handle two or more non-seekable inputs
- [bug introduced in coreutils-5.3.0]
-
- tail -f no longer tries to use inotify on GPFS or FhGFS file systems
- [you might say this was introduced in coreutils-7.5, along with inotify
- support, but the new magic numbers weren't in the usual places then.]
-
- ** Changes in behavior
-
- df avoids long UUID-including file system names in the default listing.
- With recent enough kernel/tools, these long names would be used, pushing
- second and subsequent columns far to the right. Now, when a long name
- refers to a symlink, and no file systems are specified, df prints the
- usually-short referent instead.
-
- tail -f now uses polling (not inotify) when any of its file arguments
- resides on a file system of unknown type. In addition, for each such
- argument, tail -f prints a warning with the FS type magic number and a
- request to report it to the bug-reporting address.
-
-- Bring german message catalog up to date.
-- Include upstream fix for du.
-- Include upstream patch fixing basename documentation.
-
--------------------------------------------------------------------
-Mon Feb 6 17:18:37 UTC 2012 - rschweikert@suse.com
-
-- keep binaries in /usr (UserMerge project)
-
--------------------------------------------------------------------
-Mon Dec 19 15:09:12 UTC 2011 - lnussel@suse.de
-
-- Adjust license for coreutils-8.6-honor-settings-in-etc-default-su-resp-etc-login.defs.diff
- [bnc#735081].
-
--------------------------------------------------------------------
-Fri Dec 2 08:09:09 UTC 2011 - cfarrell@suse.com
-
-- license update: GPL-3.0+
- Consolidate to GPL-3.0+ and use SPDX format
- (http://www.spdx.org/licenses). More or less compatible to Fedora package
- (who don^t use full SPDX implementation)
-
--------------------------------------------------------------------
-Wed Nov 30 09:45:46 UTC 2011 - coolo@suse.com
-
-- add automake as buildrequire to avoid implicit dependency
-
--------------------------------------------------------------------
-Mon Oct 17 15:25:21 CEST 2011 - pth@suse.de
-
-- Add upstream patch that fixes three bugs in tac:
- - remove sole use of sprintf in favor of stpcpy
- - don't misbehave with multiple non-seekable inputs
- - don't leak a file descriptor for each non-seekable input
-
--------------------------------------------------------------------
-Fri Oct 14 16:51:48 CEST 2011 - pth@suse.de
-
-- Uniformly use german quotes not french ones in german messages.
-
--------------------------------------------------------------------
-Thu Oct 13 16:07:16 CEST 2011 - pth@suse.de
-
-- Update to 8.14. Changes since 8.12:
- Bug fixes:
-
- - ls --dereference no longer outputs erroneous "argetm" strings for
- dangling symlinks when an 'ln=target' entry is in $LS_COLORS.
- [bug introduced in fileutils-4.0]
-
- - ls -lL symlink once again properly prints "+" when the referent has
- an ACL. [bug introduced in coreutils-8.13]
-
- - sort -g no longer infloops for certain inputs containing NaNs [bug
- introduced in coreutils-8.5]
-
- - chown and chgrp with the -v --from= options, now output the correct
- owner. I.E. for skipped files, the original ownership is output,
- not the new one. [bug introduced in sh-utils-2.0g]
-
- - cp -r could mistakenly change the permissions of an existing
- destination directory. [bug introduced in coreutils-6.8]
-
- - cp -u -p would fail to preserve one hard link for each up-to-date
- copy of a src-hard-linked name in the destination tree. I.e., if
- s/a and s/b are hard-linked and dst/s/a is up to date, "cp -up s
- dst" would copy s/b to dst/s/b rather than simply linking dst/s/b
- to dst/s/a. [This bug appears to have been present in "the
- beginning".]
-
- - fts-using tools (rm, du, chmod, chgrp, chown, chcon) no longer use
- memory proportional to the number of entries in each directory they
- process. Before, rm -rf 4-million-entry-directory would consume
- about 1GiB of memory. Now, it uses less than 30MB, no matter how
- many entries there are. [this bug was inherent in the use of fts:
- thus, for rm the bug was introduced in coreutils-8.0. The prior
- implementation of rm did not use as much memory. du, chmod, chgrp
- and chown started using fts in 6.0. chcon was added in
- coreutils-6.9.91 with fts support. ]
-
- - pr -T no longer ignores a specified LAST_PAGE to stop at. [bug
- introduced in textutils-1.19q]
-
- - printf '%d' '"' no longer accesses out-of-bounds memory in the
- diagnostic. [bug introduced in sh-utils-1.16]
-
- - split --number l/... no longer creates extraneous files in certain
- cases. [bug introduced in coreutils-8.8]
-
- - timeout now sends signals to commands that create their own process
- group. timeout is no longer confused when starting off with a
- child process. [bugs introduced in coreutils-7.0]
-
- - unexpand -a now aligns correctly when there are spaces spanning a
- tabstop, followed by a tab. In that case a space was dropped,
- causing misalignment. We also now ensure that a space never
- precedes a tab. [bug introduced in coreutils-5.3.0]
-
- New features:
-
- - date now accepts ISO 8601 date-time strings with "T" as the
- separator. It has long parsed dates like "2004-02-29 16:21:42"
- with a space between the date and time strings. Now it also parses
- "2004-02-29T16:21:42" and fractional-second and time-zone-annotated
- variants like "2004-02-29T16:21:42.333-07:00"
- - md5sum accepts the new --strict option. With --check, it makes the
- tool exit non-zero for any invalid input line, rather than just warning.
- This also affects sha1sum, sha224sum, sha384sum and sha512sum.
-
- - split accepts a new --filter=CMD option. With it, split filters
- output through CMD. CMD may use the $FILE environment variable,
- which is set to the nominal output file name for each invocation of
- CMD. For example, to split a file into 3 approximately equal
- parts, which are then compressed:
-
- split -n3 --filter='xz > $FILE.xz' big
-
- Note the use of single quotes, not double quotes. That creates
- files named xaa.xz, xab.xz and xac.xz.
-
- - timeout accepts a new --foreground option, to support commands not
- started directly from a shell prompt, where the command is
- interactive or needs to receive signals initiated from the
- terminal.
-
- Improvements:
-
- - md5sum --check now supports the -r format from the corresponding
- BSD tool. This also affects sha1sum, sha224sum, sha384sum and
- sha512sum.
-
- - pwd now works also on systems without openat. On such systems, pwd
- would fail when run from a directory whose absolute name contained
- more than PATH_MAX / 3 components. The df, stat and readlink
- programs are also affected due to their use of the canonicalize_*
- functions.
-
- - join --check-order now prints "join: FILE:LINE_NUMBER: bad_line"
- for an unsorted input, rather than e.g., "join: file 1 is not in
- sorted order".
-
- - shuf outputs small subsets of large permutations much more
- efficiently. For example `shuf -i1-$((2**32-1)) -n2` no longer
- exhausts memory.
-
- - stat -f now recognizes the GPFS, MQUEUE and PSTOREFS file system
- types.
-
- - timeout now supports sub-second timeouts.
-
- Changes in behavior:
-
- - chmod, chown and chgrp now output the original attributes in
- messages, when -v or -c specified.
-
- - cp -au (where --preserve=links is implicit) may now replace newer
- files in the destination, to mirror hard links from the source.
-
--------------------------------------------------------------------
-Sat Sep 17 23:29:33 UTC 2011 - jengelh@medozas.de
-
-- Remove redundant tags/sections from specfile
-
--------------------------------------------------------------------
-Tue Aug 2 00:26:05 UTC 2011 - lchiquitto@suse.com
-
-- file-has-acl: use acl_extended_file_nofollow if available to
- avoid triggering unwanted AutoFS mounts (bnc#701659).
-
--------------------------------------------------------------------
-Tue May 3 16:42:41 CEST 2011 - pth@suse.de
-
-- Remove services.
-
--------------------------------------------------------------------
-Tue May 3 14:28:01 CEST 2011 - ro@suse.de
-
-- delete coreutils-testsuite.spec
-
--------------------------------------------------------------------
-Thu Apr 28 15:35:59 CEST 2011 - pth@suse.de
-
-- Update to 8.12:
- * Bug fixes
-
- tail's --follow=name option no longer implies --retry on systems
- with inotify support. [bug introduced in coreutils-7.5]
-
- * Changes in behavior
-
- cp's extent-based (FIEMAP) copying code is more reliable in the face
- of varying and undocumented file system semantics:
- - it no longer treats unwritten extents specially
- - a FIEMAP-based extent copy always uses the FIEMAP_FLAG_SYNC flag.
- Before, it would incur the performance penalty of that sync only
- for 2.6.38 and older kernels. We thought all problems would be
- resolved for 2.6.39.
- - it now attempts a FIEMAP copy only on a file that appears sparse.
- Sparse files are relatively unusual, and the copying code incurs
- the performance penalty of the now-mandatory sync only for them.
-- Add complete german meesage catalogue.
-
--------------------------------------------------------------------
-Thu Apr 14 14:46:41 CEST 2011 - pth@suse.de
-
-- Update to 8.11:
-
- * Bug fixes
-
- cp -a --link would not create a hardlink to a symlink, instead
- copying the symlink and then not preserving its timestamp.
- [bug introduced in coreutils-8.0]
-
- cp now avoids FIEMAP issues with BTRFS before Linux 2.6.38,
- which could result in corrupt copies of sparse files.
- [bug introduced in coreutils-8.10]
-
- cut could segfault when invoked with a user-specified output
- delimiter and an unbounded range like "-f1234567890-".
- [bug introduced in coreutils-5.3.0]
-
- du would infloop when given --files0-from=DIR
- [bug introduced in coreutils-7.1]
-
- sort no longer spawns 7 worker threads to sort 16 lines
- [bug introduced in coreutils-8.6]
-
- touch built on Solaris 9 would segfault when run on Solaris 10
- [bug introduced in coreutils-8.8]
-
- wc would dereference a NULL pointer upon an early out-of-memory error
- [bug introduced in coreutils-7.1]
-
- ** New features
-
- dd now accepts the 'nocache' flag to the iflag and oflag options,
- which will discard any cache associated with the files, or
- processed portion thereof.
-
- dd now warns that 'iflag=fullblock' should be used,
- in various cases where partial reads can cause issues.
-
- ** Changes in behavior
-
- cp now avoids syncing files when possible, when doing a FIEMAP copy.
- The sync is only needed on Linux kernels before 2.6.39.
- [The sync was introduced in coreutils-8.10]
-
- cp now copies empty extents efficiently, when doing a FIEMAP copy.
- It no longer reads the zero bytes from the input, and also can
- efficiently create a hole in the output file when --sparse=always
- is specified.
-
- df now aligns columns consistently, and no longer wraps entries
- with longer device identifiers, over two lines.
-
- install now rejects its long-deprecated --preserve_context option.
- Use --preserve-context instead.
-
- test now accepts "==" as a synonym for "="
-
--------------------------------------------------------------------
-Tue Apr 5 15:13:42 CEST 2011 - pth@suse.de
-
-- Adapt coreutils-testsuite.spec to changes in patches.
-
--------------------------------------------------------------------
-Tue Apr 5 11:40:19 CEST 2011 - pth@suse.de
-
-- Remove unneeded split_suffix patch.
-
--------------------------------------------------------------------
-Mon Apr 4 16:13:04 CEST 2011 - pth@suse.de
-
-- Remove the last patch as it isn't needed. It was an old patch
- that removed the documentation for both hostname and hostid.
- I've modified that to only remove the hostname documentation.
-
--------------------------------------------------------------------
-Fri Apr 1 15:34:49 CEST 2011 - pth@suse.de
-
-- Readd documentation of hostname and hostid to texinfo
- documentation.
-- Remove obsolete and unused german translation.
-
--------------------------------------------------------------------
-Thu Feb 10 14:35:49 CET 2011 - pth@suse.de
-
-- Update to 8.10:
- * Bug fixes
-
- - du would abort with a failed assertion when two conditions are
- met: part of the hierarchy being traversed is moved to a higher
- level in the directory tree, and there is at least one more
- command line directory argument following the one containing
- the moved sub-tree. [bug introduced in coreutils-5.1.0]
-
- - join --header now skips the ordering check for the first line
- even if the other file is empty. [bug introduced in
- coreutils-8.5]
-
- - rm -f no longer fails for EINVAL or EILSEQ on file systems that
- reject file names invalid for that file system.
-
- - uniq -f NUM no longer tries to process fields after end of
- line. [bug introduced in coreutils-7.0]
-
- * New features
-
- - cp now copies sparse files efficiently on file systems with
- FIEMAP support (ext4, btrfs, xfs, ocfs2). Before, it had to
- read 2^20 bytes when copying a 1MiB sparse file. Now, it
- copies bytes only for the non-sparse sections of a file.
- Similarly, to induce a hole in the output file, it had to
- detect a long sequence of zero bytes. Now, it knows precisely
- where each hole in an input file is, and can reproduce them
- efficiently in the output file. mv also benefits when it
- resorts to copying, e.g., between file systems.
-
- - join now supports -o 'auto' which will automatically infer the
- output format from the first line in each file, to ensure the
- same number of fields are output for each line.
-
- * Changes in behavior
-
- - join no longer reports disorder when one of the files is empty.
- This allows one to use join as a field extractor like:
- join -a1 -o 1.3,1.1 - /dev/null
-
-- Add upstream patch that fixes a segfault in cut.
-- Add upstream patch to fix sparse fiemap tests.
-- Fix i18n patch for join.
-
--------------------------------------------------------------------
-Fri Jan 14 14:13:28 CET 2011 - uli@suse.de
-
-- sort threading still broken, it deadlocks occasionally; set
- default number of threads to 1 as a workaround
-
--------------------------------------------------------------------
-Wed Jan 5 14:25:16 CET 2011 - pth@suse.de
-
-- Update to 8.9:
- Bug fixes
-
- split no longer creates files with a suffix length that
- is dependent on the number of bytes or lines per file.
- [bug introduced in coreutils-8.8]
-
--------------------------------------------------------------------
-Mon Jan 3 19:32:57 CET 2011 - pth@suse.de
-
-- Update to 8.8. Changes since 8.6:
-
- Bug fixes:
-
- cp -u no longer does unnecessary copying merely because the source
- has finer-grained time stamps than the destination.
-
- od now prints floating-point numbers without losing information, and
- it no longer omits spaces between floating-point columns in some cases.
-
- sort -u with at least two threads could attempt to read through a
- corrupted pointer. [bug introduced in coreutils-8.6]
-
- sort with at least two threads and with blocked output would busy-loop
- (spinlock) all threads, often using 100% of available CPU cycles to
- do no work. I.e., "sort < big-file | less" could waste a lot of power.
- [bug introduced in coreutils-8.6]
-
- sort with at least two threads no longer segfaults due to use of pointers
- into the stack of an expired thread. [bug introduced in coreutils-8.6]
-
- sort --compress no longer mishandles subprocesses' exit statuses,
- no longer hangs indefinitely due to a bug in waiting for subprocesses,
- and no longer generates many more than NMERGE subprocesses.
-
- sort -m -o f f ... f no longer dumps core when file descriptors are limited.
-
- csplit no longer corrupts heap when writing more than 999 files,
- nor does it leak memory for every chunk of input processed
- [the bugs were present in the initial implementation]
-
- tail -F once again notices changes in a currently unavailable
- remote directory [bug introduced in coreutils-7.5]
-
- Changes in behavior:
-
- sort will not create more than 8 threads by default due to diminishing
- performance gains. Also the --parallel option is no longer restricted
- to the number of available processors.
-
- cp --attributes-only now completely overrides --reflink.
- Previously a reflink was needlessly attempted.
-
- stat's %X, %Y, and %Z directives once again print only the integer
- part of seconds since the epoch. This reverts a change from
- coreutils-8.6, that was deemed unnecessarily disruptive.
- To obtain a nanosecond-precision time stamp for %X use %.X;
- if you want (say) just 3 fractional digits, use %.3X.
- Likewise for %Y and %Z.
-
- stat's new %W format directive would print floating point seconds.
- However, with the above change to %X, %Y and %Z, we've made %W work
- the same way as the others.
-
- New features:
-
- split accepts the --number option to generate a specific number of files.
-
-- Add a complete german translation.
-- Add upstreams patch for suffix calculation in split.
-
--------------------------------------------------------------------
-Wed Dec 22 15:53:13 UTC 2010 - pth@novell.com
-
-- Use software services.
-- Remove coreutils tarball.
-- Don't use version specific patches as it breaks automatic
- updates.
-
--------------------------------------------------------------------
-Wed Nov 17 08:33:10 UTC 2010 - coolo@novell.com
-
-- remove the prerequire on permissions - this will create a bad
- cycle, coreutils is just too core
-
--------------------------------------------------------------------
-Tue Nov 16 10:50:04 UTC 2010 - lnussel@suse.de
-
-- split pam patch into separate independent files so the main
- feature can be shared with other distros
-- don't hard require coreutils-lang
-
--------------------------------------------------------------------
-Thu Nov 11 16:33:50 CET 2010 - pth@suse.de
-
-- Update to 8.6:
- o bugfixes
- * du no longer multiply counts a file that is a directory or whose
- link count is 1.
- * du -H and -L now consistently count pointed-to files instead of
- symbolic links, and correctly diagnose dangling symlinks.
- * du --ignore=D now ignores directory D even when that directory is
- found to be part of a directory cycle.
- * split now diagnoses read errors rather than silently exiting.
- * tac would perform a double-free when given an input line longer
- than 16KiB.
- * tail -F once again notices changes in a currently unavailable
- directory, and works around a Linux kernel bug where inotify runs
- out of resources.
- * tr now consistently handles case conversion character classes.
-
- o New features
- * cp now accepts the --attributes-only option to not copy file data.
- * du recognizes -d N as equivalent to --max-depth=N
- * sort now accepts the --debug option, to highlight the part of the
- line significant in the sort, and warns about questionable options.
- * sort now supports -d, -f, -i, -R, and -V in any combination.
- * stat now accepts the %m format directive to output the mount point
- for a file. It also accepts the %w and %W format directives for
- outputting the birth time of a file, if one is available.
-
- o Changes in behavior
- * df now consistently prints the device name for a bind mounted file,
- rather than its aliased target.
- * du now uses less than half as much memory when operating on trees
- with many hard-linked files.
- * ls -l now uses the traditional three field time style rather than
- the wider two field numeric ISO style in locales where a style has
- not been specified.
- * rm's -d now evokes an error; before, it was silently ignored.
- * sort -g now uses long doubles for greater range and precision.
- * sort -h no longer rejects numbers with leading or trailing ".", and
- no longer accepts numbers with multiple ".". It now considers all
- zeros to be equal.
- * sort now uses the number of available processors to parallelize
- the sorting operation.
- * stat now provides translated output when no format is specified.
- * stat no longer accepts the --context (-Z) option.
- * stat no longer accepts the %C directive when the --file-system
- option is in effect.
- * stat now outputs the full sub-second resolution for the atime,
- mtime, and ctime values since the Epoch, when using the %X, %Y, and
- %Z directives of the --format option.
- * touch's --file option is no longer recognized. Use --reference=F
- (-r) instead.
- * truncate now supports setting file sizes relative to a reference
- file. Also errors are no longer suppressed for unsupported file
- types, and relative sizes are restricted to supported file types.
-
- See NEWS in the package documentation for more verbose description.
-- Add a man page for [ (a link to test1).
-- Fix assignment of a char to a char * in join.c
-- Add permissions verifying for su.
-- Use RELRO for su.
-
--------------------------------------------------------------------
-Tue Aug 31 09:36:00 UTC 2010 - aj@suse.de
-
-- Recommend instead of require lang package since it's not mandatory.
-
--------------------------------------------------------------------
-Thu Jul 1 21:23:40 UTC 2010 - jengelh@medozas.de
-
-- Use %_smp_mflags
-
--------------------------------------------------------------------
-Tue Jun 29 20:18:04 CEST 2010 - pth@suse.de
-
-- Fix 'sort -V' not working because the i18n (mb handling) patch
- wasn't updated to handle the new option (bnc#615073).
-
--------------------------------------------------------------------
-Mon Jun 28 12:52:15 CEST 2010 - pth@suse.de
-
-- Fix typo in spec file (% missing from version).
-
--------------------------------------------------------------------
-Fri Jun 18 11:57:47 CEST 2010 - kukuk@suse.de
-
-- Last part of fix for [bnc#533249]: Don't run account part of
- PAM stack for su as root. Requires pam > 1.1.1.
-
--------------------------------------------------------------------
-Fri May 7 15:44:53 UTC 2010 - pth@novell.com
-
-- Update to 8.5:
- Bug fixes
- * cp and mv once again support preserving extended attributes.
- * cp now preserves "capabilities" when also preserving file ownership.7
- * ls --color once again honors the 'NORMAL' dircolors directive.
- [bug introduced in coreutils-6.11]
- * sort -M now handles abbreviated months that are aligned using
- blanks in the locale database. Also locales with 8 bit characters
- are handled correctly, including multi byte locales with the caveat
- that multi byte characters are matched case sensitively.
- * sort again handles obsolescent key formats (+POS -POS) correctly.
- Previously if -POS was specified, 1 field too many was used in the
- sort. [bug introduced in coreutils-7.2]
-
- New features
-
- * join now accepts the --header option, to treat the first line of
- each file as a header line to be joined and printed
- unconditionally.
-
- * timeout now accepts the --kill-after option which sends a kill
- signal to the monitored command if it's still running the specified
- duration after the initial signal was sent.
-
- * who: the "+/-" --mesg (-T) indicator of whether a user/tty is
- accepting messages could be incorrectly listed as "+", when in
- fact, the user was not accepting messages (mesg no). Before, who
- would examine only the permission bits, and not consider the group
- of the TTY device file. Thus, if a login tty's group would change
- somehow e.g., to "root", that would make it unwritable (via
- write(1)) by normal users, in spite of whatever the permission bits
- might imply. Now, when configured using the
- --with-tty-group[=NAME] option, who also compares the group of the
- TTY device with NAME (or "tty" if no group name is specified).
-
- Changes in behavior
-
- * ls --color no longer emits the final 3-byte color-resetting escape
- sequence when it would be a no-op.
-
- * join -t '' no longer emits an error and instead operates on each
- line as a whole (even if they contain NUL characters).
-
- For other changes since 7.1 see NEWS.
-- Split-up coreutils-%%{version}.diff as far as possible.
-- Prefix all patches with coreutils-.
-- All patches have the .patch suffix.
-- Use the i18n patch from Archlinux as it fixes at least one test
- suite failure.
-
--------------------------------------------------------------------
-Tue May 4 17:13:37 UTC 2010 - pth@novell.com
-
-- Fix security bug in distcheck (bnc#564373).
-- refresh patches to apply cleanly.
-
--------------------------------------------------------------------
-Tue Mar 2 09:54:10 UTC 2010 - lnussel@suse.de
-
-- enable hostid (bnc#584562)
-
--------------------------------------------------------------------
-Sat Dec 12 18:46:28 CET 2009 - jengelh@medozas.de
-
-- add baselibs.conf as a source
-
--------------------------------------------------------------------
-Mon Mar 23 15:34:29 CET 2009 - pth@suse.de
-
-- Add .ogv to dircolors (bnc#487561).
-
--------------------------------------------------------------------
-Sun Feb 22 10:49:52 CET 2009 - schwab@suse.de
-
-- Update to coreutils 7.1.
- ** New features
- Add extended attribute support available on certain filesystems like ext2
- and XFS.
- cp: Tries to copy xattrs when --preserve=xattr or --preserve=all specified
- mv: Always tries to copy xattrs
- install: Never copies xattrs
- cp and mv accept a new option, --no-clobber (-n): silently refrain
- from overwriting any existing destination file
- dd accepts iflag=cio and oflag=cio to open the file in CIO (concurrent I/O)
- mode where this feature is available.
- install accepts a new option, --compare (-C): compare each pair of source
- and destination files, and if the destination has identical content and
- any specified owner, group, permissions, and possibly SELinux context, then
- do not modify the destination at all.
- ls --color now highlights hard linked files, too
- stat -f recognizes the Lustre file system type
- ** Bug fixes
- chgrp, chmod, chown --silent (--quiet, -f) no longer print some diagnostics
- [bug introduced in coreutils-5.1]
- cp uses much less memory in some situations
- cp -a now correctly tries to preserve SELinux context (announced in 6.9.90),
- doesn't inform about failure, unlike with --preserve=all
- du --files0-from=FILE no longer reads all of FILE into RAM before
- processing the first file name
- seq 9223372036854775807 9223372036854775808 now prints only two numbers
- on systems with extended long double support and good library support.
- Even with this patch, on some systems, it still produces invalid output,
- from 3 to at least 1026 lines long. [bug introduced in coreutils-6.11]
- seq -w now accounts for a decimal point added to the last number
- to correctly print all numbers to the same width.
- wc --files0-from=FILE no longer reads all of FILE into RAM, before
- processing the first file name, unless the list of names is known
- to be small enough.
- ** Changes in behavior
- cp and mv: the --reply={yes,no,query} option has been removed.
- Using it has elicited a warning for the last three years.
- dd: user specified offsets that are too big are handled better.
- Previously, erroneous parameters to skip and seek could result
- in redundant reading of the file with no warnings or errors.
- du: -H (initially equivalent to --si) is now equivalent to
- --dereference-args, and thus works as POSIX requires
- shred: now does 3 overwrite passes by default rather than 25.
- ls -l now marks SELinux-only files with the less obtrusive '.',
- rather than '+'. A file with any other combination of MAC and ACL
- is still marked with a '+'.
-
--------------------------------------------------------------------
-Wed Nov 19 12:42:10 CET 2008 - werner@suse.de
-
-- Enable stat(1) to detect (k)AFS and CIFS network file systems
-
--------------------------------------------------------------------
-Tue Nov 18 16:48:05 CET 2008 - schwab@suse.de
-
-- Move stat to /bin.
-
--------------------------------------------------------------------
-Tue Oct 21 11:31:35 CEST 2008 - schwab@suse.de
-
-- Fix pam cleanup.
-
--------------------------------------------------------------------
-Thu Sep 18 16:38:01 CEST 2008 - schwab@suse.de
-
-- Move readlink and md5sum to /bin.
-
--------------------------------------------------------------------
-Wed Aug 20 15:40:47 CEST 2008 - schwab@suse.de
-
-- Add libselinux-devel to BuildRequires.
-
--------------------------------------------------------------------
-Tue Jun 24 15:57:01 CEST 2008 - schwab@suse.de
-
-- Fix sort field limit in multibyte case.
-
--------------------------------------------------------------------
-Wed Jun 4 14:10:05 CEST 2008 - schwab@suse.de
-
-- Update to coreutils 6.12.
- ** Bug fixes
- chcon, runcon: --help output now includes the bug-reporting address
- cp -p copies permissions more portably. For example, on MacOS X 10.5,
- "cp -p some-fifo some-file" no longer fails while trying to copy the
- permissions from the some-fifo argument.
- id with no options now prints the SELinux context only when invoked
- with no USERNAME argument.
- id and groups once again print the AFS-specific nameless group-ID (PAG).
- Printing of such large-numbered, kernel-only (not in /etc/group) group-IDs
- was suppressed in 6.11 due to ignorance that they are useful.
- uniq: avoid subtle field-skipping malfunction due to isblank misuse.
- In some locales on some systems, isblank(240) (aka  ) is nonzero.
- On such systems, uniq --skip-fields=N would fail to skip the proper
- number of fields for some inputs.
- tac: avoid segfault with --regex (-r) and multiple files, e.g.,
- "echo > x; tac -r x x". [bug present at least in textutils-1.8b, from 1992]
- ** Changes in behavior
- install once again sets SELinux context, when possible
- [it was deliberately disabled in 6.9.90]
-
--------------------------------------------------------------------
-Sun Apr 20 00:19:07 CEST 2008 - schwab@suse.de
-
-- Update to coreutils 6.11.
- ** Bug fixes
- configure --enable-no-install-program=groups now works.
- "cp -fR fifo E" now succeeds with an existing E. Before this fix, using
- -fR to copy a fifo or "special" file onto an existing file would fail
- with EEXIST. Now, it once again unlinks the destination before trying
- to create the destination file. [bug introduced in coreutils-5.90]
- dd once again works with unnecessary options like if=/dev/stdin and
- of=/dev/stdout. [bug introduced in fileutils-4.0h]
- id now uses getgrouplist, when possible. This results in
- much better performance when there are many users and/or groups.
- ls no longer segfaults on files in /proc when linked with an older version
- of libselinux. E.g., ls -l /proc/sys would dereference a NULL pointer.
- md5sum would segfault for invalid BSD-style input, e.g.,
- echo 'MD5 (' | md5sum -c - Now, md5sum ignores that line.
- sha1sum, sha224sum, sha384sum, and sha512sum are affected, too.
- [bug introduced in coreutils-5.1.0]
- md5sum -c would accept a NUL-containing checksum string like "abcd\0..."
- and would unnecessarily read and compute the checksum of the named file,
- and then compare that checksum to the invalid one: guaranteed to fail.
- Now, it recognizes that the line is not valid and skips it.
- sha1sum, sha224sum, sha384sum, and sha512sum are affected, too.
- [bug present in the original version, in coreutils-4.5.1, 1995]
- "mkdir -Z x dir" no longer segfaults when diagnosing invalid context "x"
- mkfifo and mknod would fail similarly. Now they're fixed.
- mv would mistakenly unlink a destination file before calling rename,
- when the destination had two or more hard links. It no longer does that.
- [bug introduced in coreutils-5.3.0]
- "paste -d'\' file" no longer overruns memory (heap since coreutils-5.1.2,
- stack before then) [bug present in the original version, in 1992]
- "pr -e" with a mix of backspaces and TABs no longer corrupts the heap
- [bug present in the original version, in 1992]
- "ptx -F'\' long-file-name" would overrun a malloc'd buffer and corrupt
- the heap. That was triggered by a lone backslash (or odd number of them)
- at the end of the option argument to --flag-truncation=STRING (-F),
- --word-regexp=REGEXP (-W), or --sentence-regexp=REGEXP (-S).
- "rm -r DIR" would mistakenly declare to be "write protected" -- and
- prompt about -- full DIR-relative names longer than MIN (PATH_MAX, 8192).
- "rmdir --ignore-fail-on-non-empty" detects and ignores the failure
- in more cases when a directory is empty.
- "seq -f % 1" would issue the erroneous diagnostic "seq: memory exhausted"
- rather than reporting the invalid string format.
- [bug introduced in coreutils-6.0]
- ** New features
- join now verifies that the inputs are in sorted order. This check can
- be turned off with the --nocheck-order option.
- sort accepts the new option --sort=WORD, where WORD can be one of
- general-numeric, month, numeric or random. These are equivalent to the
- options --general-numeric-sort/-g, --month-sort/-M, --numeric-sort/-n
- and --random-sort/-R, resp.
- ** Improvements
- id and groups work around an AFS-related bug whereby those programs
- would print an invalid group number, when given no user-name argument.
- ls --color no longer outputs unnecessary escape sequences
- seq gives better diagnostics for invalid formats.
- ** Portability
- rm now works properly even on systems like BeOS and Haiku,
- which have negative errno values.
- ** Consistency
- install, mkdir, rmdir and split now write --verbose output to stdout,
- not to stderr.
-
-
--------------------------------------------------------------------
-Fri Apr 11 11:42:57 CEST 2008 - schwab@suse.de
-
-- Work around a recent glibc/getopt.c diagnostic change.
-- Fix frexpl test.
-
--------------------------------------------------------------------
-Thu Apr 10 12:54:45 CEST 2008 - ro@suse.de
-
-- added baselibs.conf file to build xxbit packages
- for multilib support
-
--------------------------------------------------------------------
-Mon Feb 18 18:19:19 CET 2008 - dmueller@suse.de
-
-- split off -lang subpackage to reduce one CD media size
-
--------------------------------------------------------------------
-Mon Feb 4 12:33:30 CET 2008 - kukuk@suse.de
-
-- sux is deprecated since 3 years, let's finaly remove symlink.
-
--------------------------------------------------------------------
-Tue Jan 22 23:03:33 CET 2008 - schwab@suse.de
-
-- Update to coreutils 6.10.
- ** Bug fixes
- Fix a non-portable use of sed in configure.ac.
- [bug introduced in coreutils-6.9.92]
-
--------------------------------------------------------------------
-Sun Jan 13 12:59:37 CET 2008 - rguenther@suse.de
-
-- Reapply dropped patch:
- adjust test-getaddrinfo to not fail w/o network connection
-
--------------------------------------------------------------------
-Sat Jan 12 19:08:54 CET 2008 - schwab@suse.de
-
-- Update to coreutils 6.9.92.
- ** Bug fixes
- cp --parents no longer uses uninitialized memory when restoring the
- permissions of a just-created destination directory.
- [bug introduced in coreutils-6.9.90]
- tr's case conversion would fail in a locale with differing numbers
- of lower case and upper case characters. E.g., this would fail:
- env LC_CTYPE=en_US.ISO-8859-1 tr '[:upper:]' '[:lower:]'
- [bug introduced in coreutils-6.9.90]
- ** Improvements
- "touch -d now writable-but-owned-by-someone-else" now succeeds
- whenever that same command would succeed without "-d now".
- Before, it would work fine with no -d option, yet it would
- fail with the ostensibly-equivalent "-d now".
-
--------------------------------------------------------------------
-Mon Jan 7 16:14:51 CET 2008 - schwab@suse.de
-
-- Update to coreutils 6.9.91.
- ** Bug fixes
- "ls -l" would not output "+" on SELinux hosts unless -Z was also given.
- "rm" would fail to unlink a non-directory when run in an environment
- in which the user running rm is capable of unlinking a directory.
- [bug introduced in coreutils-6.9]
-
--------------------------------------------------------------------
-Mon Jan 7 11:12:01 CET 2008 - jblunck@suse.de
-
-- fix a cp bug with -p --parents
-
--------------------------------------------------------------------
-Wed Dec 12 11:27:08 CET 2007 - rguenther@suse.de
-
-- adjust test-getaddrinfo to not fail w/o network connection
-
--------------------------------------------------------------------
-Mon Dec 10 17:50:07 CET 2007 - ro@suse.de
-
-- change source archive compression back to .bz2 to avoid another
- dependency in the lowest basesystem
-
--------------------------------------------------------------------
-Mon Dec 3 10:44:24 CET 2007 - schwab@suse.de
-
-- Update to coreutils-6.9.90.
- ** New programs
- arch: equivalent to uname -m, not installed by default
- But don't install this program on Solaris systems.
- chcon: change the SELinux security context of a file
- mktemp: create a temporary file or directory (or names)
- runcon: run a program in a different SELinux security context
- ** Programs no longer installed by default
- hostname, su
- ** Changes in behavior
- cp, by default, refuses to copy through a dangling destination symlink
- Set POSIXLY_CORRECT if you require the old, risk-prone behavior.
- pr -F no longer suppresses the footer or the first two blank lines in
- the header. This is for compatibility with BSD and POSIX.
- tr now warns about an unescaped backslash at end of string.
- The tr from coreutils-5.2.1 and earlier would fail for such usage,
- and Solaris' tr ignores that final byte.
- ** New features
- Add SELinux support, based on the patch from Fedora:
- * cp accepts new --preserve=context option.
- * "cp -a" works with SELinux:
- Now, cp -a attempts to preserve context, but failure to do so does
- not change cp's exit status. However "cp --preserve=context" is
- similar, but failure *does* cause cp to exit with nonzero status.
- * install accepts new "-Z, --context=C" option.
- * id accepts new "-Z" option.
- * stat honors the new %C format directive: SELinux security context string
- * ls accepts a slightly modified -Z option.
- * ls: contrary to Fedora version, does not accept --lcontext and --scontext
- cp -p tries to preserve the GID of a file even if preserving the UID
- is not possible.
- uniq accepts a new option: --zero-terminated (-z). As with the sort
- option of the same name, this makes uniq consume and produce
- NUL-terminated lines rather than newline-terminated lines.
- wc no longer warns about character decoding errors in multibyte locales.
- This means for example that "wc /bin/sh" now produces normal output
- (though the word count will have no real meaning) rather than many
- error messages.
- ** New build options
- By default, "make install" no longer attempts to install (or even build) su.
- To change that, use ./configure --enable-install-program=su.
- If you also want to install the new "arch" program, do this:
- ./configure --enable-install-program=arch,su.
- You can inhibit the compilation and installation of selected programs
- at configure time. For example, to avoid installing "hostname" and
- "uptime", use ./configure --enable-no-install-program=hostname,uptime
- Note: currently, "make check" passes, even when arch and su are not
- built (that's the new default). However, if you inhibit the building
- and installation of other programs, don't be surprised if some parts
- of "make check" fail.
- ** Remove deprecated options
- df no longer accepts the --kilobytes option.
- du no longer accepts the --kilobytes or --megabytes options.
- ls no longer accepts the --kilobytes option.
- ptx longer accepts the --copyright option.
- who no longer accepts -i or --idle.
- ** Improved robustness
- ln -f can no longer silently clobber a just-created hard link.
- In some cases, ln could be seen as being responsible for data loss.
- For example, given directories a, b, c, and files a/f and b/f, we
- should be able to do this safely: ln -f a/f b/f c && rm -f a/f b/f
- However, before this change, ln would succeed, and thus cause the
- loss of the contents of a/f.
- stty no longer silently accepts certain invalid hex values
- in its 35-colon commmand-line argument
- ** Bug fixes
- chmod no longer ignores a dangling symlink. Now, chmod fails
- with a diagnostic saying that it cannot operate on such a file.
- [bug introduced in coreutils-5.1.0]
- cp attempts to read a regular file, even if stat says it is empty.
- Before, "cp /proc/cpuinfo c" would create an empty file when the kernel
- reports stat.st_size == 0, while "cat /proc/cpuinfo > c" would "work",
- and create a nonempty one. [bug introduced in coreutils-6.0]
- cp --parents no longer mishandles symlinks to directories in file
- name components in the source, e.g., "cp --parents symlink/a/b d"
- no longer fails. Also, 'cp' no longer considers a destination
- symlink to be the same as the referenced file when copying links
- or making backups. For example, if SYM is a symlink to FILE,
- "cp -l FILE SYM" now reports an error instead of silently doing
- nothing. The behavior of 'cp' is now better documented when the
- destination is a symlink.
- "cp -i --update older newer" no longer prompts; same for mv
- "cp -i" now detects read errors on standard input, and no longer consumes
- too much seekable input; same for ln, install, mv, and rm.
- cut now diagnoses a range starting with zero (e.g., -f 0-2) as invalid;
- before, it would treat it as if it started with 1 (-f 1-2).
- "cut -f 2-0" now fails; before, it was equivalent to "cut -f 2-"
- cut now diagnoses the '-' in "cut -f -" as an invalid range, rather
- than interpreting it as the unlimited range, "1-".
- date -d now accepts strings of the form e.g., 'YYYYMMDD +N days',
- in addition to the usual 'YYYYMMDD N days'.
- du -s now includes the size of any stat'able-but-inaccessible directory
- in the total size.
- du (without -s) prints whatever it knows of the size of an inaccessible
- directory. Before, du would print nothing for such a directory.
- ls -x DIR would sometimes output the wrong string in place of the
- first entry. [introduced in coreutils-6.8]
- ls --color would mistakenly color a dangling symlink as if it were
- a regular symlink. This would happen only when the dangling symlink
- was not a command-line argument and in a directory with d_type support.
- [introduced in coreutils-6.0]
- ls --color, (with a custom LS_COLORS envvar value including the
- ln=target attribute) would mistakenly output the string "target"
- before the name of each symlink. [introduced in coreutils-6.0]
- od's --skip (-j) option now works even when the kernel says that a
- nonempty regular file has stat.st_size = 0. This happens at least
- with files in /proc and linux-2.6.22.
- "od -j L FILE" had a bug: when the number of bytes to skip, L, is exactly
- the same as the length of FILE, od would skip *no* bytes. When the number
- of bytes to skip is exactly the sum of the lengths of the first N files,
- od would skip only the first N-1 files. [introduced in textutils-2.0.9]
- ./printf %.10000000f 1 could get an internal ENOMEM error and generate
- no output, yet erroneously exit with status 0. Now it diagnoses the error
- and exits with nonzero status. [present in initial implementation]
- seq no longer mishandles obvious cases like "seq 0 0.000001 0.000003",
- so workarounds like "seq 0 0.000001 0.0000031" are no longer needed.
- seq would mistakenly reject some valid format strings containing %%,
- and would mistakenly accept some invalid ones. e.g., %g%% and %%g, resp.
- "seq .1 .1" would mistakenly generate no output on some systems
- Obsolete sort usage with an invalid ordering-option character, e.g.,
- "env _POSIX2_VERSION=199209 sort +1x" no longer makes sort free an
- invalid pointer [introduced in coreutils-6.5]
- sorting very long lines (relative to the amount of available memory)
- no longer provokes unaligned memory access
- split --line-bytes=N (-C N) no longer creates an empty file
- [this bug is present at least as far back as textutils-1.22 (Jan, 1997)]
- tr -c no longer aborts when translating with Set2 larger than the
- complement of Set1. [present in the original version, in 1992]
- tr no longer rejects an unmatched [:lower:] or [:upper:] in SET1.
- [present in the original version]
-
--------------------------------------------------------------------
-Thu Nov 29 14:28:26 CET 2007 - schwab@suse.de
-
-- Update to coreutils-6.9.89.48 snapshot.
-
--------------------------------------------------------------------
-Mon Jul 23 15:15:11 CEST 2007 - schwab@suse.de
-
-- Fix random sort.
-- Fix invalid free.
-- Fix misalignment.
-
--------------------------------------------------------------------
-Sun May 20 19:17:21 CEST 2007 - schwab@suse.de
-
-- Fix compiling with glibc 2.6.
-
--------------------------------------------------------------------
-Sun May 20 10:53:16 CEST 2007 - schwab@suse.de
-
-- Fix fchownat test.
-
--------------------------------------------------------------------
-Mon Apr 2 11:17:36 CEST 2007 - schwab@suse.de
-
-- Fix ls -x.
-
--------------------------------------------------------------------
-Fri Mar 23 17:03:38 CET 2007 - schwab@suse.de
-
-- Update to coreutils 6.9.
- ** Bug fixes
- cp -x (--one-file-system) would fail to set mount point permissions
- The default block size and output format for df -P are now unaffected by
- the DF_BLOCK_SIZE, BLOCK_SIZE, and BLOCKSIZE environment variables. It
- is still affected by POSIXLY_CORRECT, though.
- Using pr -m -s (i.e. merging files, with TAB as the output separator)
- no longer inserts extraneous spaces between output columns.
-
--------------------------------------------------------------------
-Wed Mar 14 15:50:36 CET 2007 - lnussel@suse.de
-
-- su: actually use /etc/pam.d/su-l when running su - (#254428)
-
--------------------------------------------------------------------
-Mon Mar 5 17:23:45 CET 2007 - lnussel@suse.de
-
-- su: don't chdir("/") before fork() (#251287)
-
--------------------------------------------------------------------
-Fri Mar 2 13:47:35 CET 2007 - lnussel@suse.de
-
-- split off and rework PAM patch for su:
- * run pam_open_session as root (#245706)
- * use separate pam configs for "su" and "su -" (RedHat #198639)
- * detect pam libs in configure script, add option to disable it
- * don't set argv[0] to "-su", use upstream behavior instead
- * don't use getlogin() for setting PAM_RUSER
-
--------------------------------------------------------------------
-Sun Feb 25 10:58:58 CET 2007 - schwab@suse.de
-
-- Update to coreutils 6.8.
- ** Bug fixes
- chgrp, chmod, and chown now honor the --preserve-root option.
- Before, they would warn, yet continuing traversing and operating on /.
- chmod no longer fails in an environment (e.g., a chroot) with openat
- support but with insufficient /proc support.
- "cp --parents F/G D" no longer creates a directory D/F when F is not
- a directory (and F/G is therefore invalid).
- "cp --preserve=mode" would create directories that briefly had
- too-generous permissions in some cases. For example, when copying a
- directory with permissions 777 the destination directory might
- temporarily be setgid on some file systems, which would allow other
- users to create subfiles with the same group as the directory. Fix
- similar problems with 'install' and 'mv'.
- cut no longer dumps core for usage like "cut -f2- f1 f2" with two or
- more file arguments. This was due to a double-free bug, introduced
- in coreutils-5.3.0.
- dd bs= operands now silently override any later ibs= and obs=
- operands, as POSIX and tradition require.
- "ls -FRL" always follows symbolic links on Linux. Introduced in
- coreutils-6.0.
- A cross-partition "mv /etc/passwd ~" (by non-root) now prints
- a reasonable diagnostic. Before, it would print this:
- "mv: cannot remove `/etc/passwd': Not a directory".
- pwd and "readlink -e ." no longer fail unnecessarily when a parent
- directory is unreadable.
- "rm -rf /etc/passwd" (run by non-root) now prints a diagnostic.
- Before it would print nothing.
- "rm --interactive=never F" no longer prompts for an unwritable F
- ** New features
- sort's new --compress-program=PROG option specifies a compression
- program to use when writing and reading temporary files.
- This can help save both time and disk space when sorting large inputs.
- ** New features
- sort accepts the new option -C, which acts like -c except no diagnostic
- is printed. Its --check option now accepts an optional argument, and
- --check=quiet and --check=silent are now aliases for -C, while
- --check=diagnose-first is an alias for -c or plain --check.
-
--------------------------------------------------------------------
-Tue Jan 9 13:08:01 CET 2007 - schwab@suse.de
-
-- Fix localized month sorting [#231790].
-
--------------------------------------------------------------------
-Wed Dec 13 13:27:36 CET 2006 - schwab@suse.de
-
-- Fix acl tests.
-
--------------------------------------------------------------------
-Sat Dec 9 01:00:28 CET 2006 - schwab@suse.de
-
-- Update to coreutils 6.7.
- ** Bug fixes
- When cp -p copied a file with special mode bits set, the same bits
- were set on the copy even when ownership could not be preserved.
- This could result in files that were setuid to the wrong user.
- To fix this, special mode bits are now set in the copy only if its
- ownership is successfully preserved. Similar problems were fixed
- with mv when copying across file system boundaries. This problem
- affects all versions of coreutils through 6.6.
- cp --preserve=ownership would create output files that temporarily
- had too-generous permissions in some cases. For example, when
- copying a file with group A and mode 644 into a group-B sticky
- directory, the output file was briefly readable by group B.
- Fix similar problems with cp options like -p that imply
- --preserve=ownership, with install -d when combined with either -o
- or -g, and with mv when copying across file system boundaries.
- This bug affects coreutils 6.0 through 6.6.
- du --one-file-system (-x) would skip subdirectories of any directory
- listed as second or subsequent command line argument. This bug affects
- coreutils-6.4, 6.5 and 6.6.
-
--------------------------------------------------------------------
-Wed Nov 22 16:16:52 CET 2006 - schwab@suse.de
-
-- Update to coreutils 6.6.
- ** Bug fixes
- ls would segfault (dereference a NULL pointer) for a file with a
- nameless group or owner. This bug was introduced in coreutils-6.5.
- A bug in the latest official m4/gettext.m4 (from gettext-0.15)
- made configure fail to detect gettext support, due to the unusual
- way in which coreutils uses AM_GNU_GETTEXT.
- ** Improved robustness
- Now, du (and the other fts clients: chmod, chgrp, chown) honor a
- trailing slash in the name of a symlink-to-directory even on
- Solaris 9, by working around its buggy fstatat implementation.
-
--------------------------------------------------------------------
-Mon Nov 20 11:34:05 CET 2006 - schwab@suse.de
-
-- Update to coreutils 6.5.
- ** Bug fixes
- du (and the other fts clients: chmod, chgrp, chown) would exit early
- when encountering an inaccessible directory on a system with native
- openat support (i.e., linux-2.6.16 or newer along with glibc-2.4
- or newer). This bug was introduced with the switch to gnulib's
- openat-based variant of fts, for coreutils-6.0.
- "ln --backup f f" now produces a sensible diagnostic
- ** New features
- rm accepts a new option: --one-file-system
-
--------------------------------------------------------------------
-Mon Oct 23 10:58:38 CEST 2006 - schwab@suse.de
-
-- Update to coreutils 6.4.
- ** Bug fixes
- chgrp and chown would malfunction when invoked with both -R and -H and
- with one or more of the following: --preserve-root, --verbose, --changes,
- --from=o:g (chown only). This bug was introduced with the switch to
- gnulib's openat-based variant of fts, for coreutils-6.0.
- cp --backup dir1 dir2, would rename an existing dir2/dir1 to dir2/dir1~.
- This bug was introduced in coreutils-6.0.
- With --force (-f), rm no longer fails for ENOTDIR.
- For example, "rm -f existing-non-directory/anything" now exits
- successfully, ignoring the error about a nonexistent file.
-
--------------------------------------------------------------------
-Mon Oct 9 14:48:23 CEST 2006 - schwab@suse.de
-
-- Update to coreutils 6.3.
- ** Improved robustness
- pinky no longer segfaults on Darwin 7.9.0 (MacOS X 10.3.9) due to a
- buggy native getaddrinfo function.
- rm works around a bug in Darwin 7.9.0 (MacOS X 10.3.9) that would
- sometimes keep it from removing all entries in a directory on an HFS+
- or NFS-mounted partition.
- sort would fail to handle very large input (around 40GB) on systems with a
- mkstemp function that returns a file descriptor limited to 32-bit offsets.
- ** Bug fixes
- chmod would fail unnecessarily in an unusual case: when an initially-
- inaccessible argument is rendered accessible by chmod's action on a
- preceding command line argument. This bug also affects chgrp, but
- it is harder to demonstrate. It does not affect chown. The bug was
- introduced with the switch from explicit recursion to the use of fts
- in coreutils-5.1.0 (2003-10-15).
- cp -i and mv -i occasionally neglected to prompt when the copy or move
- action was bound to fail. This bug dates back to before fileutils-4.0.
- With --verbose (-v), cp and mv would sometimes generate no output,
- or neglect to report file removal.
- For the "groups" command:
- "groups" no longer prefixes the output with "user :" unless more
- than one user is specified; this is for compatibility with BSD.
- "groups user" now exits nonzero when it gets a write error.
- "groups" now processes options like --help more compatibly.
- shuf would infloop, given 8KB or more of piped input
- ** Portability
- Versions of chmod, chown, chgrp, du, and rm (tools that use openat etc.)
- compiled for Solaris 8 now also work when run on Solaris 10.
-
--------------------------------------------------------------------
-Thu Oct 5 00:16:42 CEST 2006 - agruen@suse.de
-
-- cp: Replace the old --attributes=regex option with
- --preserve=xattrs. Only copy extended attributes if this
- option is given. Use libattr's new copy_attr_action() function
- to check which attributes to copy in /etc/xattr.conf.
-
--------------------------------------------------------------------
-Tue Sep 19 13:20:47 CEST 2006 - schwab@suse.de
-
-- Disable broken autopoint.
-
--------------------------------------------------------------------
-Mon Sep 18 13:13:58 CEST 2006 - schwab@suse.de
-
-- Update to coreutils 6.2.
- ** Changes in behavior
- mkdir -p and install -d (or -D) now use a method that forks a child
- process if the working directory is unreadable and a later argument
- uses a relative file name. This avoids some race conditions, but it
- means you may need to kill two processes to stop these programs.
- rm now rejects attempts to remove the root directory, e.g., `rm -fr /'
- now fails without removing anything. Likewise for any file name with
- a final `./' or `../' component.
- tail now ignores the -f option if POSIXLY_CORRECT is set, no file
- operand is given, and standard input is any FIFO; formerly it did
- this only for pipes.
- ** Infrastructure changes
- Coreutils now uses gnulib via the gnulib-tool script.
- If you check the source out from CVS, then follow the instructions
- in README-cvs. Although this represents a large change to the
- infrastructure, it should cause no change in how the tools work.
- ** Bug fixes
- cp --backup no longer fails when the last component of a source file
- name is "." or "..".
- "ls --color" would highlight other-writable and sticky directories
- no differently than regular directories on a file system with
- dirent.d_type support.
- "mv -T --verbose --backup=t A B" now prints the " (backup: B.~1~)"
- suffix when A and B are directories as well as when they are not.
- mv and "cp -r" no longer fail when invoked with two arguments
- where the first one names a directory and the second name ends in
- a slash and doesn't exist. E.g., "mv dir B/", for nonexistent B,
- now succeeds, once more. This bug was introduced in coreutils-5.3.0.
-
--------------------------------------------------------------------
-Fri Sep 1 15:56:51 CEST 2006 - schwab@suse.de
-
-- Fix sbin patch [#202632].
-
--------------------------------------------------------------------
-Mon Aug 21 11:32:53 CEST 2006 - schwab@suse.de
-
-- Update to coreutils 6.1.
- ** Changes in behavior
- df now considers BSD "kernfs" file systems to be dummies
- ** Bug fixes
- cp --sparse preserves sparseness at the end of a file, even when
- the file's apparent size is not a multiple of its block size.
- [introduced with the original design, in fileutils-4.0r, 2000-04-29]
- df (with a command line argument) once again prints its header
- [introduced in coreutils-6.0]
- ls -CF would misalign columns in some cases involving non-stat'able files
- [introduced in coreutils-6.0]
-
--------------------------------------------------------------------
-Tue Aug 15 17:50:41 CEST 2006 - schwab@suse.de
-
-- Update to coreutils 6.0.
- ** Improved robustness
- df: if the file system claims to have more available than total blocks,
- report the number of used blocks as being "total - available"
- (a negative number) rather than as garbage.
- dircolors: a new autoconf run-test for AIX's buggy strndup function
- prevents malfunction on that system; may also affect cut, expand,
- and unexpand.
- fts no longer changes the current working directory, so its clients
- (chmod, chown, chgrp, du) no longer malfunction under extreme conditions.
- pwd and other programs using lib/getcwd.c work even on file systems
- where dirent.d_ino values are inconsistent with those from stat.st_ino.
- rm's core is now reentrant: rm --recursive (-r) now processes
- hierarchies without changing the working directory at all.
- ** Changes in behavior
- basename and dirname now treat // as different from / on platforms
- where the two are distinct.
- chmod, install, and mkdir now preserve a directory's set-user-ID and
- set-group-ID bits unless you explicitly request otherwise. E.g.,
- `chmod 755 DIR' and `chmod u=rwx,go=rx DIR' now preserve DIR's
- set-user-ID and set-group-ID bits instead of clearing them, and
- similarly for `mkdir -m 755 DIR' and `mkdir -m u=rwx,go=rx DIR'. To
- clear the bits, mention them explicitly in a symbolic mode, e.g.,
- `mkdir -m u=rwx,go=rx,-s DIR'. To set them, mention them explicitly
- in either a symbolic or a numeric mode, e.g., `mkdir -m 2755 DIR',
- `mkdir -m u=rwx,go=rx,g+s' DIR. This change is for convenience on
- systems where these bits inherit from parents. Unfortunately other
- operating systems are not consistent here, and portable scripts
- cannot assume the bits are set, cleared, or preserved, even when the
- bits are explicitly mentioned. For example, OpenBSD 3.9 `mkdir -m
- 777 D' preserves D's setgid bit but `chmod 777 D' clears it.
- Conversely, Solaris 10 `mkdir -m 777 D', `mkdir -m g-s D', and
- `chmod 0777 D' all preserve D's setgid bit, and you must use
- something like `chmod g-s D' to clear it.
- `cp --link --no-dereference' now works also on systems where the
- link system call cannot create a hard link to a symbolic link.
- This change has no effect on systems with a Linux-based kernel.
- csplit and nl now use POSIX syntax for regular expressions, not
- Emacs syntax. As a result, character classes like [[:print:]] and
- interval expressions like A\{1,9\} now have their usual meaning,
- . no longer matches the null character, and \ must precede the + and
- ? operators.
- date: a command like date -d '2006-04-23 21 days ago' would print
- the wrong date in some time zones. (see the test for an example)
- df now considers "none" and "proc" file systems to be dummies and
- therefore does not normally display them. Also, inaccessible file
- systems (which can be caused by shadowed mount points or by chrooted
- bind mounts) are now dummies, too.
- expr no longer complains about leading ^ in a regular expression
- (the anchor is ignored), or about regular expressions like A** (the
- second "*" is ignored). expr now exits with status 2 (not 3) for
- errors it detects in the expression's values; exit status 3 is now
- used only for internal errors (such as integer overflow, which expr
- now checks for).
- install and mkdir now implement the X permission symbol correctly,
- e.g., `mkdir -m a+X dir'; previously the X was ignored.
- install now creates parent directories with mode u=rwx,go=rx (755)
- instead of using the mode specified by the -m option; and it does
- not change the owner or group of parent directories. This is for
- compatibility with BSD and closes some race conditions.
- ln now uses different (and we hope clearer) diagnostics when it fails.
- ln -v now acts more like FreeBSD, so it generates output only when
- successful and the output is easier to parse.
- ls now defaults to --time-style='locale', not --time-style='posix-long-iso'.
- However, the 'locale' time style now behaves like 'posix-long-iso'
- if your locale settings appear to be messed up. This change
- attempts to have the default be the best of both worlds.
- mkfifo and mknod no longer set special mode bits (setuid, setgid,
- and sticky) with the -m option.
- nohup's usual diagnostic now more precisely specifies the I/O
- redirections, e.g., "ignoring input and appending output to
- nohup.out". Also, nohup now redirects stderr to nohup.out (or
- $HOME/nohup.out) if stdout is closed and stderr is a tty; this is in
- response to Open Group XCU ERN 71.
- rm --interactive now takes an optional argument, although the
- default of using no argument still acts like -i.
- rm no longer fails to remove an empty, unreadable directory
- seq changes:
- seq defaults to a minimal fixed point format that does not lose
- information if seq's operands are all fixed point decimal numbers.
- You no longer need the `-f%.f' in `seq -f%.f 1048575 1024 1050623',
- for example, since the default format now has the same effect.
- seq now lets you use %a, %A, %E, %F, and %G formats.
- seq now uses long double internally rather than double.
- sort now reports incompatible options (e.g., -i and -n) rather than
- silently ignoring one of them.
- stat's --format=FMT option now works the way it did before 5.3.0:
- FMT is automatically newline terminated. The first stable release
- containing this change was 5.92.
- stat accepts the new option --printf=FMT, where FMT is *not*
- automatically newline terminated.
- stat: backslash escapes are interpreted in a format string specified
- via --printf=FMT, but not one specified via --format=FMT. That includes
- octal (\ooo, at most three octal digits), hexadecimal (\xhh, one or
- two hex digits), and the standard sequences (\a, \b, \f, \n, \r, \t,
- \v, \", \\).
- With no operand, 'tail -f' now silently ignores the '-f' only if
- standard input is a FIFO or pipe and POSIXLY_CORRECT is set.
- Formerly, it ignored the '-f' when standard input was a FIFO, pipe,
- or socket.
- ** Scheduled for removal
- ptx's --copyright (-C) option is scheduled for removal in 2007, and
- now evokes a warning. Use --version instead.
- rm's --directory (-d) option is scheduled for removal in 2006. This
- option has been silently ignored since coreutils 5.0. On systems
- that support unlinking of directories, you can use the "unlink"
- command to unlink a directory.
- Similarly, we are considering the removal of ln's --directory (-d,
- -F) option in 2006. Please write to <bug-coreutils@gnu.org> if this
- would cause a problem for you. On systems that support hard links
- to directories, you can use the "link" command to create one.
- ** New programs
- base64: base64 encoding and decoding (RFC 3548) functionality.
- sha224sum: print or check a SHA224 (224-bit) checksum
- sha256sum: print or check a SHA256 (256-bit) checksum
- sha384sum: print or check a SHA384 (384-bit) checksum
- sha512sum: print or check a SHA512 (512-bit) checksum
- shuf: Shuffle lines of text.
- ** New features
- chgrp now supports --preserve-root, --no-preserve-root (default),
- as it was documented to do, and just as chmod, chown, and rm do.
- New dd iflag= and oflag= flags:
- 'directory' causes dd to fail unless the file is a directory, on
- hosts that support this (e.g., Linux kernels, version 2.1.126 and
- later). This has limited utility but is present for completeness.
- 'noatime' causes dd to read a file without updating its access
- time, on hosts that support this (e.g., Linux kernels, version
- 2.6.8 and later).
- 'nolinks' causes dd to fail if the file has multiple hard links,
- on hosts that support this (e.g., Solaris 10 and later).
- ls accepts the new option --group-directories-first, to make it
- list directories before files.
- rm now accepts the -I (--interactive=once) option. This new option
- prompts once if rm is invoked recursively or if more than three
- files are being deleted, which is less intrusive than -i prompting
- for every file, but provides almost the same level of protection
- against mistakes.
- shred and sort now accept the --random-source option.
- sort now accepts the --random-sort (-R) option and `R' ordering option.
- sort now supports obsolete usages like "sort +1 -2" unless
- POSIXLY_CORRECT is set. However, when conforming to POSIX
- 1003.1-2001 "sort +1" still sorts the file named "+1".
- wc accepts a new option --files0-from=FILE, where FILE contains a
- list of NUL-terminated file names.
- ** Bug fixes
- cat with any of the options, -A -v -e -E -T, when applied to a
- file in /proc or /sys (linux-specific), would truncate its output,
- usually printing nothing.
- cp -p would fail in a /proc-less chroot, on some systems
- When `cp -RL' encounters the same directory more than once in the
- hierarchy beneath a single command-line argument, it no longer confuses
- them with hard-linked directories.
- fts-using tools (chmod, chown, chgrp, du) no longer fail due to
- a double-free bug -- it could be triggered by making a directory
- inaccessible while e.g., du is traversing the hierarchy under it.
- fts-using tools (chmod, chown, chgrp, du) no longer misinterpret
- a very long symlink chain as a dangling symlink. Before, such a
- misinterpretation would cause these tools not to diagnose an ELOOP error.
- ls --indicator-style=file-type would sometimes stat a symlink
- unnecessarily.
- ls --file-type worked like --indicator-style=slash (-p),
- rather than like --indicator-style=file-type.
- mv: moving a symlink into the place of an existing non-directory is
- now done atomically; before, mv would first unlink the destination.
- mv -T DIR EMPTY_DIR no longer fails unconditionally. Also, mv can
- now remove an empty destination directory: mkdir -p a b/a; mv a b
- rm (on systems with openat) can no longer exit before processing
- all command-line arguments.
- rm is no longer susceptible to a few low-probability memory leaks.
- rm -r no longer fails to remove an inaccessible and empty directory
- rm -r's cycle detection code can no longer be tricked into reporting
- a false positive (introduced in fileutils-4.1.9).
- shred --remove FILE no longer segfaults on Gentoo systems
- sort would fail for large inputs (~50MB) on systems with a buggy
- mkstemp function. sort and tac now use the replacement mkstemp
- function, and hence are no longer subject to limitations (of 26 or 32,
- on the maximum number of files from a given template) on HP-UX 10.20,
- SunOS 4.1.4, Solaris 2.5.1 and OSF1/Tru64 V4.0F&V5.1.
- tail -f once again works on a file with the append-only
- attribute (affects at least Linux ext2, ext3, xfs file systems)
-
--------------------------------------------------------------------
-Tue Aug 8 15:29:32 CEST 2006 - schwab@suse.de
-
-- Move sux to %{_bindir}.
-
--------------------------------------------------------------------
-Mon Jun 26 13:20:23 CEST 2006 - schwab@suse.de
-
-- Update to coreutils 5.97.
- ** Bug fixes
- rebuild with better autoconf test for when the lstat replacement
- function is needed -- required for Solaris 9
- cat with any of the options, -A -v -e -E -T, when applied to a
- file in /proc or /sys (linux-specific), would truncate its output,
- usually printing nothing.
- ** Improved robustness
- dircolors: a new autoconf run-test for AIX's buggy strndup function
- prevents malfunction on that system; may also affect cut, expand,
- and unexpand.
- ** New features
- chgrp now supports --preserve-root, --no-preserve-root (default),
- as it was documented to do, and just as chmod, chown, and rm do.
-
--------------------------------------------------------------------
-Thu Jun 22 15:38:27 CEST 2006 - schwab@suse.de
-
-- Fix conflict with <fcntl.h>.
-
--------------------------------------------------------------------
-Mon May 22 13:34:26 CEST 2006 - schwab@suse.de
-
-- Update to coreutils 5.96.
-
--------------------------------------------------------------------
-Sat May 13 16:39:03 CEST 2006 - schwab@suse.de
-
-- Update to coreutils 5.95.
-
--------------------------------------------------------------------
-Fri Apr 7 16:34:42 CEST 2006 - cthiel@suse.de
-
-- added Obsoletes: libselinux (hack for bug #156519)
-
--------------------------------------------------------------------
-Mon Feb 13 01:31:31 CET 2006 - schwab@suse.de
-
-- Fix spurious failure with cp -LR.
-- Move check for /proc.
-
--------------------------------------------------------------------
-Mon Jan 30 16:27:11 CET 2006 - schwab@suse.de
-
-- Always print newline after format in stat [#145905].
-- Barf if /proc is not mounted.
-
--------------------------------------------------------------------
-Wed Jan 25 21:30:02 CET 2006 - mls@suse.de
-
-- converted neededforbuild to BuildRequires
-
--------------------------------------------------------------------
-Thu Jan 19 16:43:57 CET 2006 - meissner@suse.de
-
-- Do not strip /bin/su.
-
--------------------------------------------------------------------
-Wed Jan 11 15:20:50 CET 2006 - schwab@suse.de
-
-- Fix infloop when ignoring characters [#141756].
-
--------------------------------------------------------------------
-Mon Dec 19 12:03:23 CET 2005 - kukuk@suse.de
-
-- Add fallback if futimesat does not work
-
--------------------------------------------------------------------
-Mon Dec 5 17:15:17 CET 2005 - ke@suse.de
-
-- Fix typo in German translation file; reported by Olaf Hering
- [#105863].
-
--------------------------------------------------------------------
-Mon Dec 5 16:53:58 CET 2005 - schwab@suse.de
-
-- Drop SELinux support.
-
--------------------------------------------------------------------
-Tue Nov 15 16:47:44 CET 2005 - uli@suse.de
-
-- some tests fail on ARM (QEMU problem?); ignore for now
-
--------------------------------------------------------------------
-Sun Nov 6 17:42:27 CET 2005 - schwab@suse.de
-
-- Update to coreutils 5.93.
-
--------------------------------------------------------------------
-Wed Nov 2 14:55:10 CET 2005 - schwab@suse.de
-
-- Update to coreutils 5.92.
-- Fix invalid use of va_list.
-- Add some fixes from cvs.
-
--------------------------------------------------------------------
-Thu Oct 20 10:16:26 CEST 2005 - schwab@suse.de
-
-- Reenable DEFAULT_POSIX2_VERSION.
-
--------------------------------------------------------------------
-Wed Oct 19 19:04:17 CEST 2005 - agruen@suse.de
-
-- Add acl and xattr patches.
-
--------------------------------------------------------------------
-Mon Oct 17 15:45:25 CEST 2005 - schwab@suse.de
-
-- Update to coreutils 5.91.
-
--------------------------------------------------------------------
-Sat Oct 1 16:05:24 CEST 2005 - schwab@suse.de
-
-- Update to coreutils 5.90.
-- Disable acl patches for now.
-
--------------------------------------------------------------------
-Sun Sep 25 21:33:05 CEST 2005 - schwab@suse.de
-
-- Fix warning.
-
--------------------------------------------------------------------
-Wed Aug 24 15:07:03 CEST 2005 - werner@suse.de
-
-- Let `su' handle /sbin and /usr/sbin in path
-
--------------------------------------------------------------------
-Mon Aug 1 16:48:44 CEST 2005 - kukuk@suse.de
-
-- And yet another uninitialized variable fix.
-
--------------------------------------------------------------------
-Fri Jul 29 16:01:07 CEST 2005 - schwab@suse.de
-
-- Fix another uninitialized variable.
-
--------------------------------------------------------------------
-Wed Jul 6 18:33:56 CEST 2005 - schwab@suse.de
-
-- Fix uninitialized variable.
-
--------------------------------------------------------------------
-Mon Jul 4 11:00:33 CEST 2005 - schwab@suse.de
-
-- Update i18n patch.
-
--------------------------------------------------------------------
-Mon Jun 20 23:11:53 CEST 2005 - schwab@suse.de
-
-- Fix last change.
-
--------------------------------------------------------------------
-Wed Jun 15 17:34:06 CEST 2005 - kukuk@suse.de
-
-- Compile/link su with -fpie/-pie
-
--------------------------------------------------------------------
-Sat May 21 16:46:32 CEST 2005 - kukuk@suse.de
-
-- Add support for /etc/default/su
-
--------------------------------------------------------------------
-Mon May 2 11:32:05 CEST 2005 - kukuk@suse.de
-
-- Don't overwrite PATH if su is called with "-" option.
-
--------------------------------------------------------------------
-Wed Mar 2 14:29:21 CET 2005 - schwab@suse.de
-
-- Fix merge error [#67103].
-
--------------------------------------------------------------------
-Mon Feb 28 16:18:57 CET 2005 - schwab@suse.de
-
-- Call pam_getenvlist before pam_end.
-
--------------------------------------------------------------------
-Mon Feb 28 13:16:14 CET 2005 - schwab@suse.de
-
-- Link su to sux [#66830].
-
--------------------------------------------------------------------
-Wed Feb 2 19:48:49 CET 2005 - schwab@suse.de
-
-- Handle xfs and jfs in stat [#50415].
-
--------------------------------------------------------------------
-Wed Feb 2 02:02:28 CET 2005 - schwab@suse.de
-
-- Handle subfs like autofs.
-
--------------------------------------------------------------------
-Tue Jan 25 13:52:57 CET 2005 - schwab@suse.de
-
-- Fix path_concat.
-
--------------------------------------------------------------------
-Thu Jan 20 17:26:10 CET 2005 - schwab@suse.de
-
-- Use pam_xauth [#42238].
-
--------------------------------------------------------------------
-Fri Jan 14 22:04:46 CET 2005 - schwab@suse.de
-
-- Fix merge error [#49853].
-
--------------------------------------------------------------------
-Tue Jan 11 18:39:44 CET 2005 - schwab@suse.de
-
-- Update to coreutils 5.3.0.
-
--------------------------------------------------------------------
-Mon Nov 8 17:15:39 CET 2004 - kukuk@suse.de
-
-- Use common-* PAM config files for su PAM configuration
-
--------------------------------------------------------------------
-Mon Oct 25 15:01:04 CEST 2004 - schwab@suse.de
-
-- Fix last change.
-- Fix selinux patch.
-
--------------------------------------------------------------------
-Wed Oct 20 01:55:31 CEST 2004 - ro@suse.de
-
-- remove no language support (nb is already there)
-
--------------------------------------------------------------------
-Sat Oct 2 03:08:31 CEST 2004 - agruen@suse.de
-
-- #46609: Fix chown and chgrp utilities for uid == (uid_t) -1 and
- gid == (gid_t) -1 case.
-- Add missing #include to have NULL defined in lib/acl.c
-
--------------------------------------------------------------------
-Fri Sep 10 00:13:28 CEST 2004 - schwab@suse.de
-
-- Fix uninitialized variable [#44929].
-- Fix selinux patch.
-
--------------------------------------------------------------------
-Wed Aug 25 13:32:20 CEST 2004 - schwab@suse.de
-
-- Fix hardlink accounting patch.
-
--------------------------------------------------------------------
-Mon May 24 18:07:35 CEST 2004 - schwab@suse.de
-
-- Update testsuite for change in chown.
-
--------------------------------------------------------------------
-Mon May 24 16:34:33 CEST 2004 - schwab@suse.de
-
-- Precompute length in caller of ismbblank to avoid quadratic behaviour
- [#40741].
-
--------------------------------------------------------------------
-Mon May 17 15:33:12 CEST 2004 - schwab@suse.de
-
-- Fix handling of symlinks in chown [#40691].
-
--------------------------------------------------------------------
-Sat Apr 17 20:09:11 CEST 2004 - schwab@suse.de
-
-- Pacify autobuild.
-
--------------------------------------------------------------------
-Fri Apr 2 14:48:24 CEST 2004 - schwab@suse.de
-
-- Add support for IUTF8 in stty.
-
--------------------------------------------------------------------
-Tue Mar 30 18:39:10 CEST 2004 - schwab@suse.de
-
-- Fix merge error in selinux patch [#37431].
-
--------------------------------------------------------------------
-Mon Mar 29 14:51:59 CEST 2004 - schwab@suse.de
-
-- Fix hardlink accounting in du.
-
--------------------------------------------------------------------
-Mon Mar 22 14:19:59 CET 2004 - schwab@suse.de
-
-- Fix race in the testsuite.
-
--------------------------------------------------------------------
-Mon Mar 15 16:21:20 CET 2004 - kukuk@suse.de
-
-- Update SELinux patch to new libselinux interface
-
--------------------------------------------------------------------
-Mon Mar 15 11:25:54 CET 2004 - schwab@suse.de
-
-- Fix date parsing.
-
--------------------------------------------------------------------
-Sat Mar 13 18:21:40 CET 2004 - schwab@suse.de
-
-- Update to coreutils 5.2.1.
- * Includes mv fix.
- * Fix sparse handling in cp.
- * Fix descriptor leak in nohup.
- * Fix POSIX issues in expr.
- * Always allow user.group in chown.
-
--------------------------------------------------------------------
-Fri Mar 12 18:18:33 CET 2004 - schwab@suse.de
-
-- Fix sysinfo patch [#35337].
-
--------------------------------------------------------------------
-Fri Mar 12 16:57:21 CET 2004 - schwab@suse.de
-
-- Fix preserving links in mv.
-
--------------------------------------------------------------------
-Wed Mar 3 15:28:06 CET 2004 - schwab@suse.de
-
-- Fix help output from mkdir.
-
--------------------------------------------------------------------
-Fri Feb 20 01:06:39 CET 2004 - schwab@suse.de
-
-- Update to coreutils 5.2.0.
-
--------------------------------------------------------------------
-Mon Feb 9 18:03:45 CET 2004 - schwab@suse.de
-
-- Update to coreutils 5.1.3.
-
--------------------------------------------------------------------
-Mon Feb 2 17:20:11 CET 2004 - agruen@suse.de
-
-- Update acl and xattr patches, and add some Changelog text.
-
--------------------------------------------------------------------
-Mon Jan 26 14:34:12 CET 2004 - schwab@suse.de
-
-- Update to coreutils 5.1.2.
-
--------------------------------------------------------------------
-Fri Jan 23 17:16:32 CET 2004 - schwab@suse.de
-
-- Don't link [ to test.
-
--------------------------------------------------------------------
-Mon Jan 19 13:26:00 CET 2004 - schwab@suse.de
-
-- Update to coreutils 5.1.1.
-- Default to POSIX.2-1992.
-
--------------------------------------------------------------------
-Fri Jan 16 12:26:48 CET 2004 - kukuk@suse.de
-
-- Add pam-devel to neededforbuild
-
--------------------------------------------------------------------
-Fri Jan 9 13:51:53 CET 2004 - schwab@suse.de
-
-- Fix spurious test failure.
-
--------------------------------------------------------------------
-Thu Jan 8 16:48:32 CET 2004 - schwab@suse.de
-
-- Update to coreutils 5.1.0.
-
--------------------------------------------------------------------
-Fri Dec 12 23:08:27 CET 2003 - schwab@suse.de
-
-- Fix use of AC_SEARCH_LIBS.
-
--------------------------------------------------------------------
-Tue Dec 9 17:31:09 CET 2003 - schwab@suse.de
-
-- Cleanup SELinux patch.
-
--------------------------------------------------------------------
-Tue Dec 9 16:07:28 CET 2003 - kukuk@suse.de
-
-- Add SELinux patch.
-
--------------------------------------------------------------------
-Wed Nov 26 11:59:34 CET 2003 - schwab@suse.de
-
-- Fix sorting of months in multibyte case [#33299].
-
--------------------------------------------------------------------
-Wed Oct 22 15:33:21 CEST 2003 - schwab@suse.de
-
-- Fix building without extended attributes.
-
--------------------------------------------------------------------
-Wed Oct 15 15:17:11 CEST 2003 - schwab@suse.de
-
-- Cleanup sysinfo patch.
-
--------------------------------------------------------------------
-Fri Sep 19 11:09:36 CEST 2003 - kukuk@suse.de
-
-- Add missing textutil to Provides
-
--------------------------------------------------------------------
-Mon Aug 25 17:42:23 CEST 2003 - agruen@suse.de
-
-- Fix uname command to report reasonable processor and platform
- information (coreutils-sysinfo.diff: based on similar RedHat
- patch).
-
--------------------------------------------------------------------
-Mon Jul 21 15:23:56 CEST 2003 - schwab@suse.de
-
-- Fix typo in i18n patch for join.
-
--------------------------------------------------------------------
-Fri Jul 18 12:05:56 CEST 2003 - schwab@suse.de
-
-- Avoid abort in sort on inconsistent locales [#26506].
-
--------------------------------------------------------------------
-Tue Jul 15 15:16:37 CEST 2003 - okir@suse.de
-
-- make su export variables declared via pam_putenv
-
--------------------------------------------------------------------
-Wed May 28 10:15:39 CEST 2003 - kukuk@suse.de
-
-- PAM fixes for su:
- - Move pam_open_session call before dropping privilegs, session
- management needs max. possible credentials and needs to be done
- before we change into the home directory of the user.
- - Don't set PAM_TTY and PAM_RUSER to fake names.
- - Use conversion function from libpam_misc.
-
--------------------------------------------------------------------
-Fri May 16 11:11:44 CEST 2003 - schwab@suse.de
-
-- Fix exit status from su.
-
--------------------------------------------------------------------
-Thu Apr 24 11:43:14 CEST 2003 - ro@suse.de
-
-- fix head calling syntax
-
--------------------------------------------------------------------
-Mon Apr 7 13:11:19 CEST 2003 - schwab@suse.de
-
-- Only delete info entries when removing last version.
-
--------------------------------------------------------------------
-Fri Apr 4 17:58:20 CEST 2003 - schwab@suse.de
-
-- Update to coreutils 5.0.
-
--------------------------------------------------------------------
-Mon Mar 31 12:53:29 CEST 2003 - schwab@suse.de
-
-- Update to coreutils 4.5.12.
-
--------------------------------------------------------------------
-Thu Mar 20 18:10:25 CET 2003 - schwab@suse.de
-
-- Update to coreutils 4.5.11.
-
--------------------------------------------------------------------
-Mon Mar 10 13:42:36 CET 2003 - schwab@suse.de
-
-- Fix LFS bug in du [#24960].
-
--------------------------------------------------------------------
-Thu Feb 27 15:39:06 CET 2003 - schwab@suse.de
-
-- Readd textutils i18n patches.
-
--------------------------------------------------------------------
-Thu Feb 27 14:53:19 CET 2003 - agruen@suse.de
-
-- Per hint from Andreas Schwab, don't use awk in autoconf. (The
- improved test is simpler, too.)
-
--------------------------------------------------------------------
-Thu Feb 27 05:29:05 CET 2003 - agruen@suse.de
-
-- Fix autoconf test for attr_copy_file that caused all binaries
- to be linked needlessly against libattr.so.
-
--------------------------------------------------------------------
-Tue Feb 25 15:18:39 CET 2003 - agruen@suse.de
-
-- Extended attribute copying: Use the newly exported
- attr_copy_check_permissions() callback exported by libattr.so,
- so that the EA copying done by coreutils is consistent with
- other apps [#24244].
-
--------------------------------------------------------------------
-Mon Feb 24 16:27:21 CET 2003 - schwab@suse.de
-
-- Update to coreutils 4.5.8.
- * Fixes bugs in du.
-
--------------------------------------------------------------------
-Mon Feb 17 15:00:04 CET 2003 - agruen@suse.de
-
-- Add extended attribute copying patch: Affects cp, mv, install.
- See the cp manual page for details on the changes in cp. The
- mv utility always tries to copy extended attributes; install
- never does.
-
--------------------------------------------------------------------
-Mon Feb 10 13:16:58 CET 2003 - schwab@suse.de
-
-- Update to coreutils 4.5.7.
-
--------------------------------------------------------------------
-Fri Feb 7 13:47:58 CET 2003 - kukuk@suse.de
-
-- Use pam_unix2.so instead of pam_unix.so, use same rules for
- password changing as passwd.
-
--------------------------------------------------------------------
-Thu Feb 6 17:48:08 CET 2003 - schwab@suse.de
-
-- Use %install_info.
-
--------------------------------------------------------------------
-Thu Feb 6 17:05:42 CET 2003 - schwab@suse.de
-
-- Update to coreutils 4.5.6.
-
--------------------------------------------------------------------
-Mon Feb 3 14:47:47 CET 2003 - schwab@suse.de
-
-- Package created, combining textutils, sh-utils and fileutils.
-
projects / platform / upstream / coreutils.git / commitdiff