dt-bindings: soc: Add documentation for the MediaTek GCE unit
authorHoulong Wei <houlong.wei@mediatek.com>
Wed, 25 Jul 2018 01:26:39 +0000 (09:26 +0800)
committerJassi Brar <jaswinder.singh@linaro.org>
Fri, 3 Aug 2018 14:22:14 +0000 (19:52 +0530)
This adds documentation for the MediaTek Global Command Engine (GCE) unit
found in MT8173 SoCs.

Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: HS Liao <hs.liao@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Documentation/devicetree/bindings/mailbox/mtk-gce.txt [new file with mode: 0644]
include/dt-bindings/gce/mt8173-gce.h [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
new file mode 100644 (file)
index 0000000..7d72b21
--- /dev/null
@@ -0,0 +1,57 @@
+MediaTek GCE
+===============
+
+The Global Command Engine (GCE) is used to help read/write registers with
+critical time limitation, such as updating display configuration during the
+vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
+
+CMDQ driver uses mailbox framework for communication. Please refer to
+mailbox.txt for generic information about mailbox device-tree bindings.
+
+Required properties:
+- compatible: Must be "mediatek,mt8173-gce"
+- reg: Address range of the GCE unit
+- interrupts: The interrupt signal from the GCE block
+- clock: Clocks according to the common clock binding
+- clock-names: Must be "gce" to stand for GCE clock
+- #mbox-cells: Should be 3.
+       <&phandle channel priority atomic_exec>
+       phandle: Label name of a gce node.
+       channel: Channel of mailbox. Be equal to the thread id of GCE.
+       priority: Priority of GCE thread.
+       atomic_exec: GCE processing continuous packets of commands in atomic
+               way.
+
+Required properties for a client device:
+- mboxes: Client use mailbox to communicate with GCE, it should have this
+  property and list of phandle, mailbox specifiers.
+- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
+  to the register address.
+
+Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'. Such as
+sub-system ids, thread priority, event ids.
+
+Example:
+
+       gce: gce@10212000 {
+               compatible = "mediatek,mt8173-gce";
+               reg = <0 0x10212000 0 0x1000>;
+               interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+               clocks = <&infracfg CLK_INFRA_GCE>;
+               clock-names = "gce";
+               thread-num = CMDQ_THR_MAX_COUNT;
+               #mbox-cells = <3>;
+       };
+
+Example for a client device:
+
+       mmsys: clock-controller@14000000 {
+               compatible = "mediatek,mt8173-mmsys";
+               mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
+                        <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
+               mediatek,gce-subsys = <SUBSYS_1400XXXX>;
+               mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
+                               CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+
+               ...
+       };
diff --git a/include/dt-bindings/gce/mt8173-gce.h b/include/dt-bindings/gce/mt8173-gce.h
new file mode 100644 (file)
index 0000000..ffcf94b
--- /dev/null
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Houlong Wei <houlong.wei@mediatek.com>
+ *
+ */
+
+#ifndef _DT_BINDINGS_GCE_MT8173_H
+#define _DT_BINDINGS_GCE_MT8173_H
+
+/* GCE HW thread priority */
+#define CMDQ_THR_PRIO_LOWEST   0
+#define CMDQ_THR_PRIO_HIGHEST  1
+
+/* GCE SUBSYS */
+#define SUBSYS_1400XXXX                1
+#define SUBSYS_1401XXXX                2
+#define SUBSYS_1402XXXX                3
+
+/* GCE HW EVENT */
+#define CMDQ_EVENT_DISP_OVL0_SOF               11
+#define CMDQ_EVENT_DISP_OVL1_SOF               12
+#define CMDQ_EVENT_DISP_RDMA0_SOF              13
+#define CMDQ_EVENT_DISP_RDMA1_SOF              14
+#define CMDQ_EVENT_DISP_RDMA2_SOF              15
+#define CMDQ_EVENT_DISP_WDMA0_SOF              16
+#define CMDQ_EVENT_DISP_WDMA1_SOF              17
+#define CMDQ_EVENT_DISP_OVL0_EOF               39
+#define CMDQ_EVENT_DISP_OVL1_EOF               40
+#define CMDQ_EVENT_DISP_RDMA0_EOF              41
+#define CMDQ_EVENT_DISP_RDMA1_EOF              42
+#define CMDQ_EVENT_DISP_RDMA2_EOF              43
+#define CMDQ_EVENT_DISP_WDMA0_EOF              44
+#define CMDQ_EVENT_DISP_WDMA1_EOF              45
+#define CMDQ_EVENT_MUTEX0_STREAM_EOF           53
+#define CMDQ_EVENT_MUTEX1_STREAM_EOF           54
+#define CMDQ_EVENT_MUTEX2_STREAM_EOF           55
+#define CMDQ_EVENT_MUTEX3_STREAM_EOF           56
+#define CMDQ_EVENT_MUTEX4_STREAM_EOF           57
+#define CMDQ_EVENT_DISP_RDMA0_UNDERRUN         63
+#define CMDQ_EVENT_DISP_RDMA1_UNDERRUN         64
+#define CMDQ_EVENT_DISP_RDMA2_UNDERRUN         65
+
+#endif