Required properties:
- compatible : "altr,sys-mgr"
- reg : Should contain 1 register ranges(address and length)
+- cpu1-start-addr : CPU1 start address in hex.
Example:
sysmgr@ffd08000 {
compatible = "altr,sys-mgr";
reg = <0xffd08000 0x1000>;
+ cpu1-start-addr = <0xffd080c4>;
};
r8a7740-armadillo800eva.dtb \
sh73a0-kzm9g.dtb \
sh7372-mackerel.dtb
+dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
+ socfpga_vt.dtb
dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
spear1340-evb.dtb
dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
ethernet0 = &gmac0;
serial0 = &uart0;
serial1 = &uart1;
+ timer0 = &timer0;
+ timer1 = &timer1;
+ timer2 = &timer2;
+ timer3 = &timer3;
};
cpus {
interrupts = <1 13 0xf04>;
};
- timer0: timer@ffc08000 {
+ timer0: timer0@ffc08000 {
compatible = "snps,dw-apb-timer-sp";
interrupts = <0 167 4>;
- clock-frequency = <200000000>;
reg = <0xffc08000 0x1000>;
};
- timer1: timer@ffc09000 {
+ timer1: timer1@ffc09000 {
compatible = "snps,dw-apb-timer-sp";
interrupts = <0 168 4>;
- clock-frequency = <200000000>;
reg = <0xffc09000 0x1000>;
};
- timer2: timer@ffd00000 {
+ timer2: timer2@ffd00000 {
compatible = "snps,dw-apb-timer-osc";
interrupts = <0 169 4>;
- clock-frequency = <200000000>;
reg = <0xffd00000 0x1000>;
};
- timer3: timer@ffd01000 {
+ timer3: timer3@ffd01000 {
compatible = "snps,dw-apb-timer-osc";
interrupts = <0 170 4>;
- clock-frequency = <200000000>;
reg = <0xffd01000 0x1000>;
};
- uart0: uart@ffc02000 {
+ uart0: serial0@ffc02000 {
compatible = "snps,dw-apb-uart";
reg = <0xffc02000 0x1000>;
- clock-frequency = <7372800>;
interrupts = <0 162 4>;
reg-shift = <2>;
reg-io-width = <4>;
};
- uart1: uart@ffc03000 {
+ uart1: serial1@ffc03000 {
compatible = "snps,dw-apb-uart";
reg = <0xffc03000 0x1000>;
- clock-frequency = <7372800>;
interrupts = <0 163 4>;
reg-shift = <2>;
reg-io-width = <4>;
/ {
model = "Altera SOCFPGA Cyclone V";
- compatible = "altr,socfpga-cyclone5";
+ compatible = "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
bootargs = "console=ttyS0,57600";
memory {
name = "memory";
device_type = "memory";
- reg = <0x0 0x10000000>; /* 256MB */
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ soc {
+ timer0@ffc08000 {
+ clock-frequency = <100000000>;
+ };
+
+ timer1@ffc09000 {
+ clock-frequency = <100000000>;
+ };
+
+ timer2@ffd00000 {
+ clock-frequency = <25000000>;
+ };
+
+ timer3@ffd01000 {
+ clock-frequency = <25000000>;
+ };
+
+ serial0@ffc02000 {
+ clock-frequency = <100000000>;
+ };
+
+ serial1@ffc03000 {
+ clock-frequency = <100000000>;
+ };
+
+ sysmgr@ffd08000 {
+ cpu1-start-addr = <0xffd080c4>;
+ };
};
};
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+/include/ "socfpga.dtsi"
+
+/ {
+ model = "Altera SOCFPGA VT";
+ compatible = "altr,socfpga-vt", "altr,socfpga";
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1 GB */
+ };
+
+ soc {
+ timer0@ffc08000 {
+ clock-frequency = <7000000>;
+ };
+
+ timer1@ffc09000 {
+ clock-frequency = <7000000>;
+ };
+
+ timer2@ffd00000 {
+ clock-frequency = <7000000>;
+ };
+
+ timer3@ffd01000 {
+ clock-frequency = <7000000>;
+ };
+
+ serial0@ffc02000 {
+ clock-frequency = <7372800>;
+ };
+
+ serial1@ffc03000 {
+ clock-frequency = <7372800>;
+ };
+
+ sysmgr@ffd08000 {
+ cpu1-start-addr = <0xffd08010>;
+ };
+ };
+};
.section ".text.head", "ax"
-/*
- * The secondary kernel init calls v7_flush_dcache_all before it enables
- * the L1; however, the L1 comes out of reset in an undefined state, so
- * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
- * of cache lines with uninitialized data and uninitialized tags to get
- * written out to memory, which does really unpleasant things to the main
- * processor. We fix this by performing an invalidate, rather than a
- * clean + invalidate, before jumping into the kernel.
- *
- * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
- * to be called for both secondary cores startup and primary core resume
- * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S.
- */
-ENTRY(v7_invalidate_l1)
- mov r0, #0
- mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
- mcr p15, 2, r0, c0, c0, 0
- mrc p15, 1, r0, c0, c0, 0
-
- ldr r1, =0x7fff
- and r2, r1, r0, lsr #13
-
- ldr r1, =0x3ff
-
- and r3, r1, r0, lsr #3 @ NumWays - 1
- add r2, r2, #1 @ NumSets
-
- and r0, r0, #0x7
- add r0, r0, #4 @ SetShift
-
- clz r1, r3 @ WayShift
- add r4, r3, #1 @ NumWays
-1: sub r2, r2, #1 @ NumSets--
- mov r3, r4 @ Temp = NumWays
-2: subs r3, r3, #1 @ Temp--
- mov r5, r3, lsl r1
- mov r6, r2, lsl r0
- orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
- mcr p15, 0, r5, c7, c6, 2
- bgt 2b
- cmp r2, #0
- bgt 1b
- dsb
- isb
- mov pc, lr
-ENDPROC(v7_invalidate_l1)
-
#ifdef CONFIG_SMP
ENTRY(v7_secondary_startup)
bl v7_invalidate_l1
__CPUINIT
-/* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks!
- *
- * The secondary kernel init calls v7_flush_dcache_all before it enables
- * the L1; however, the L1 comes out of reset in an undefined state, so
- * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
- * of cache lines with uninitialized data and uninitialized tags to get
- * written out to memory, which does really unpleasant things to the main
- * processor. We fix this by performing an invalidate, rather than a
- * clean + invalidate, before jumping into the kernel.
- *
- * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
- * to be called for both secondary cores startup and primary core resume
- * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S.
- */
-ENTRY(v7_invalidate_l1)
- mov r0, #0
- mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
- mcr p15, 2, r0, c0, c0, 0
- mrc p15, 1, r0, c0, c0, 0
-
- ldr r1, =0x7fff
- and r2, r1, r0, lsr #13
-
- ldr r1, =0x3ff
-
- and r3, r1, r0, lsr #3 @ NumWays - 1
- add r2, r2, #1 @ NumSets
-
- and r0, r0, #0x7
- add r0, r0, #4 @ SetShift
-
- clz r1, r3 @ WayShift
- add r4, r3, #1 @ NumWays
-1: sub r2, r2, #1 @ NumSets--
- mov r3, r4 @ Temp = NumWays
-2: subs r3, r3, #1 @ Temp--
- mov r5, r3, lsl r1
- mov r6, r2, lsl r0
- orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
- mcr p15, 0, r5, c7, c6, 2
- bgt 2b
- cmp r2, #0
- bgt 1b
- dsb
- isb
- mov pc, lr
-ENDPROC(v7_invalidate_l1)
-
ENTRY(shmobile_invalidate_start)
bl v7_invalidate_l1
b secondary_startup
#ifndef __MACH_CORE_H
#define __MACH_CORE_H
-extern void secondary_startup(void);
+extern void socfpga_secondary_startup(void);
extern void __iomem *socfpga_scu_base_addr;
extern void socfpga_init_clocks(void);
extern struct smp_operations socfpga_smp_ops;
extern char secondary_trampoline, secondary_trampoline_end;
+extern unsigned long cpu1start_addr;
+
#define SOCFPGA_SCU_VIRT_BASE 0xfffec000
#endif
__CPUINIT
.arch armv7-a
-#define CPU1_START_ADDR 0xffd08010
-
ENTRY(secondary_trampoline)
- movw r0, #:lower16:CPU1_START_ADDR
- movt r0, #:upper16:CPU1_START_ADDR
+ movw r2, #:lower16:cpu1start_addr
+ movt r2, #:upper16:cpu1start_addr
+
+ /* The socfpga VT cannot handle a 0xC0000000 page offset when loading
+ the cpu1start_addr, we bit clear it. Tested on HW and VT. */
+ bic r2, r2, #0x40000000
+ ldr r0, [r2]
ldr r1, [r0]
bx r1
ENTRY(secondary_trampoline_end)
+
+ENTRY(socfpga_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(socfpga_secondary_startup)
{
int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
- memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+ if (cpu1start_addr) {
+ memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
- __raw_writel(virt_to_phys(secondary_startup), (sys_manager_base_addr+0x10));
+ __raw_writel(virt_to_phys(socfpga_secondary_startup),
+ (sys_manager_base_addr + (cpu1start_addr & 0x000000ff)));
- flush_cache_all();
- smp_wmb();
- outer_clean_range(0, trampoline_size);
+ flush_cache_all();
+ smp_wmb();
+ outer_clean_range(0, trampoline_size);
- /* This will release CPU #1 out of reset.*/
- __raw_writel(0, rst_manager_base_addr + 0x10);
+ /* This will release CPU #1 out of reset.*/
+ __raw_writel(0, rst_manager_base_addr + 0x10);
+ }
return 0;
}
void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE));
void __iomem *sys_manager_base_addr;
void __iomem *rst_manager_base_addr;
+unsigned long cpu1start_addr;
static struct map_desc scu_io_desc __initdata = {
.virtual = SOCFPGA_SCU_VIRT_BASE,
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "altr,sys-mgr");
+
+ if (of_property_read_u32(np, "cpu1-start-addr",
+ (u32 *) &cpu1start_addr))
+ pr_err("SMP: Need cpu1-start-addr in device tree.\n");
+
sys_manager_base_addr = of_iomap(np, 0);
np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");
static const char *altera_dt_match[] = {
"altr,socfpga",
- "altr,socfpga-cyclone5",
NULL
};
.section ".text.head", "ax"
-/*
- * Tegra specific entry point for secondary CPUs.
- * The secondary kernel init calls v7_flush_dcache_all before it enables
- * the L1; however, the L1 comes out of reset in an undefined state, so
- * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
- * of cache lines with uninitialized data and uninitialized tags to get
- * written out to memory, which does really unpleasant things to the main
- * processor. We fix this by performing an invalidate, rather than a
- * clean + invalidate, before jumping into the kernel.
- */
-ENTRY(v7_invalidate_l1)
- mov r0, #0
- mcr p15, 2, r0, c0, c0, 0
- mrc p15, 1, r0, c0, c0, 0
-
- ldr r1, =0x7fff
- and r2, r1, r0, lsr #13
-
- ldr r1, =0x3ff
-
- and r3, r1, r0, lsr #3 @ NumWays - 1
- add r2, r2, #1 @ NumSets
-
- and r0, r0, #0x7
- add r0, r0, #4 @ SetShift
-
- clz r1, r3 @ WayShift
- add r4, r3, #1 @ NumWays
-1: sub r2, r2, #1 @ NumSets--
- mov r3, r4 @ Temp = NumWays
-2: subs r3, r3, #1 @ Temp--
- mov r5, r3, lsl r1
- mov r6, r2, lsl r0
- orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
- mcr p15, 0, r5, c7, c6, 2
- bgt 2b
- cmp r2, #0
- bgt 1b
- dsb
- isb
- mov pc, lr
-ENDPROC(v7_invalidate_l1)
-
ENTRY(tegra_secondary_startup)
bl v7_invalidate_l1
/* Enable coresight */
#include "proc-macros.S"
/*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor. We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This function is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.
+ */
+ENTRY(v7_invalidate_l1)
+ mov r0, #0
+ mcr p15, 2, r0, c0, c0, 0
+ mrc p15, 1, r0, c0, c0, 0
+
+ ldr r1, =0x7fff
+ and r2, r1, r0, lsr #13
+
+ ldr r1, =0x3ff
+
+ and r3, r1, r0, lsr #3 @ NumWays - 1
+ add r2, r2, #1 @ NumSets
+
+ and r0, r0, #0x7
+ add r0, r0, #4 @ SetShift
+
+ clz r1, r3 @ WayShift
+ add r4, r3, #1 @ NumWays
+1: sub r2, r2, #1 @ NumSets--
+ mov r3, r4 @ Temp = NumWays
+2: subs r3, r3, #1 @ Temp--
+ mov r5, r3, lsl r1
+ mov r6, r2, lsl r0
+ orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+ mcr p15, 0, r5, c7, c6, 2
+ bgt 2b
+ cmp r2, #0
+ bgt 1b
+ dsb
+ isb
+ mov pc, lr
+ENDPROC(v7_invalidate_l1)
+
+/*
* v7_flush_icache_all()
*
* Flush the whole I-cache.
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff