ahci: Add platform driver

This can be used for AHCI-compatible interfaces implemented inside
System-On-Chip solutions, or AHCI devices connected via localbus.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 01c52c4..cbadb9f 100644 (file)
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -65,6 +65,14 @@ config SATA_AHCI
 
          If unsure, say N.
 
+config SATA_AHCI_PLATFORM
+       tristate "Platform AHCI SATA support"
+       help
+         This option enables support for Platform AHCI Serial ATA
+         controllers.
+
+         If unsure, say N.
+
 config SATA_SIL24
        tristate "Silicon Image 3124/3132 SATA support"
        depends on PCI

diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 20c5251..d0a93c4 100644 (file)
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -2,6 +2,7 @@
 obj-$(CONFIG_ATA)              += libata.o
 
 obj-$(CONFIG_SATA_AHCI)                += ahci.o libahci.o
+obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
 obj-$(CONFIG_SATA_SVW)         += sata_svw.o
 obj-$(CONFIG_ATA_PIIX)         += ata_piix.o
 obj-$(CONFIG_SATA_PROMISE)     += sata_promise.o

diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
new file mode 100644 (file)
index 0000000..42cdd73
--- /dev/null
+++ b/drivers/ata/ahci_platform.c
@@ -0,0 +1,191 @@
+/*
+ * AHCI SATA platform driver
+ *
+ * Copyright 2004-2005  Red Hat, Inc.
+ *   Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2010  MontaVista Software, LLC.
+ *   Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include "ahci.h"
+
+static int __init ahci_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct ahci_platform_data *pdata = dev->platform_data;
+       struct ata_port_info pi = {
+               .flags          = AHCI_FLAG_COMMON,
+               .pio_mask       = ATA_PIO4,
+               .udma_mask      = ATA_UDMA6,
+               .port_ops       = &ahci_ops,
+       };
+       const struct ata_port_info *ppi[] = { &pi, NULL };
+       struct ahci_host_priv *hpriv;
+       struct ata_host *host;
+       struct resource *mem;
+       int irq;
+       int n_ports;
+       int i;
+       int rc;
+
+       mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!mem) {
+               dev_err(dev, "no mmio space\n");
+               return -EINVAL;
+       }
+
+       irq = platform_get_irq(pdev, 0);
+       if (irq <= 0) {
+               dev_err(dev, "no irq\n");
+               return -EINVAL;
+       }
+
+       if (pdata && pdata->init) {
+               rc = pdata->init(dev);
+               if (rc)
+                       return rc;
+       }
+
+       if (pdata && pdata->ata_port_info)
+               pi = *pdata->ata_port_info;
+
+       hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+       if (!hpriv) {
+               rc = -ENOMEM;
+               goto err0;
+       }
+
+       hpriv->flags |= (unsigned long)pi.private_data;
+
+       hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
+       if (!hpriv->mmio) {
+               dev_err(dev, "can't map %pR\n", mem);
+               rc = -ENOMEM;
+               goto err0;
+       }
+
+       ahci_save_initial_config(dev, hpriv,
+               pdata ? pdata->force_port_map : 0,
+               pdata ? pdata->mask_port_map  : 0);
+
+       /* prepare host */
+       if (hpriv->cap & HOST_CAP_NCQ)
+               pi.flags |= ATA_FLAG_NCQ;
+
+       if (hpriv->cap & HOST_CAP_PMP)
+               pi.flags |= ATA_FLAG_PMP;
+
+       ahci_set_em_messages(hpriv, &pi);
+
+       /* CAP.NP sometimes indicate the index of the last enabled
+        * port, at other times, that of the last possible port, so
+        * determining the maximum port number requires looking at
+        * both CAP.NP and port_map.
+        */
+       n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+       host = ata_host_alloc_pinfo(dev, ppi, n_ports);
+       if (!host) {
+               rc = -ENOMEM;
+               goto err0;
+       }
+
+       host->private_data = hpriv;
+
+       if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+               host->flags |= ATA_HOST_PARALLEL_SCAN;
+       else
+               printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+
+       if (pi.flags & ATA_FLAG_EM)
+               ahci_reset_em(host);
+
+       for (i = 0; i < host->n_ports; i++) {
+               struct ata_port *ap = host->ports[i];
+
+               ata_port_desc(ap, "mmio %pR", mem);
+               ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
+
+               /* set initial link pm policy */
+               ap->pm_policy = NOT_AVAILABLE;
+
+               /* set enclosure management message type */
+               if (ap->flags & ATA_FLAG_EM)
+                       ap->em_message_type = ahci_em_messages;
+
+               /* disabled/not-implemented port */
+               if (!(hpriv->port_map & (1 << i)))
+                       ap->ops = &ata_dummy_port_ops;
+       }
+
+       rc = ahci_reset_controller(host);
+       if (rc)
+               goto err0;
+
+       ahci_init_controller(host);
+       ahci_print_info(host, "platform");
+
+       rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+                              &ahci_sht);
+       if (rc)
+               goto err0;
+
+       return 0;
+err0:
+       if (pdata && pdata->exit)
+               pdata->exit(dev);
+       return rc;
+}
+
+static int __devexit ahci_remove(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct ahci_platform_data *pdata = dev->platform_data;
+       struct ata_host *host = dev_get_drvdata(dev);
+
+       ata_host_detach(host);
+
+       if (pdata && pdata->exit)
+               pdata->exit(dev);
+
+       return 0;
+}
+
+static struct platform_driver ahci_driver = {
+       .probe = ahci_probe,
+       .remove = __devexit_p(ahci_remove),
+       .driver = {
+               .name = "ahci",
+               .owner = THIS_MODULE,
+       },
+};
+
+static int __init ahci_init(void)
+{
+       return platform_driver_probe(&ahci_driver, ahci_probe);
+}
+module_init(ahci_init);
+
+static void __exit ahci_exit(void)
+{
+       platform_driver_unregister(&ahci_driver);
+}
+module_exit(ahci_exit);
+
+MODULE_DESCRIPTION("AHCI SATA platform driver");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ahci");

diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
new file mode 100644 (file)
index 0000000..f7dd576
--- /dev/null
+++ b/include/linux/ahci_platform.h
@@ -0,0 +1,29 @@
+/*
+ * AHCI SATA platform driver
+ *
+ * Copyright 2004-2005  Red Hat, Inc.
+ *   Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2010  MontaVista Software, LLC.
+ *   Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#ifndef _AHCI_PLATFORM_H
+#define _AHCI_PLATFORM_H
+
+struct device;
+struct ata_port_info;
+
+struct ahci_platform_data {
+       int (*init)(struct device *dev);
+       void (*exit)(struct device *dev);
+       const struct ata_port_info *ata_port_info;
+       unsigned int force_port_map;
+       unsigned int mask_port_map;
+};
+
+#endif /* _AHCI_PLATFORM_H */