v4l: tvp5150: Don't override output pinmuxing at stream on/off time

commit 79d6205a3f741c9fb89cfc47dfa0eddb1526726d upstream.

The s_stream() handler incorrectly writes the whole MISC_CTL register to
enable or disable the outputs, overriding the output pinmuxing
configuration. Fix it to only touch the output enable bits.

The CONF_SHARED_PIN register is also written by the same function,
resulting in muxing the INTREQ signal instead of the VBLK/GPCL signal on
the INTREQ/GPCL/VBLK pin. As the driver doesn't support interrupts this
is obviously incorrect, and breaks operation on other devices. Fix it by
removing the write.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index e88d2d2..59aa4da 100644 (file)
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -1055,22 +1055,27 @@ static const struct media_entity_operations tvp5150_sd_media_ops = {
 static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
 {
        struct tvp5150 *decoder = to_tvp5150(sd);
-       /* Output format: 8-bit ITU-R BT.656 with embedded syncs */
-       int val = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE;
-
-       /* Output format: 8-bit 4:2:2 YUV with discrete sync */
-       if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
-               val = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE
-                   | TVP5150_MISC_CTL_CLOCK_OE;
+       int val;
 
-       /* Initializes TVP5150 to its default values */
-       /* # set PCLK (27MHz) */
-       tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00);
+       /* Enable or disable the video output signals. */
+       val = tvp5150_read(sd, TVP5150_MISC_CTL);
+       if (val < 0)
+               return val;
+
+       val &= ~(TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
+                TVP5150_MISC_CTL_CLOCK_OE);
+
+       if (enable) {
+               /*
+                * Enable the YCbCr and clock outputs. In discrete sync mode
+                * (non-BT.656) additionally enable the the sync outputs.
+                */
+               val |= TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE;
+               if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
+                       val |= TVP5150_MISC_CTL_SYNC_OE;
+       }
 
-       if (enable)
-               tvp5150_write(sd, TVP5150_MISC_CTL, val);
-       else
-               tvp5150_write(sd, TVP5150_MISC_CTL, 0x00);
+       tvp5150_write(sd, TVP5150_MISC_CTL, val);
 
        return 0;
 }