versatile \
versatileab \
versatilepb \
- voiceblue \
davinci_dvevm \
davinci_schmoogie \
davinci_sffsdr \
+++ /dev/null
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de
-#
-# (C) Copyright 2005
-# Ladislav Michl, 2N Telekomunikace, michl@2n.cz
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := voiceblue.o
-SOBJS := setup.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-LOAD_ADDR = 0x10400000
-
-#########################################################################
-
-all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $^)
-
-$(obj)eeprom_start.o:
- echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ -
-
-$(obj)eeprom: $(obj)eeprom_start.o $(obj)eeprom.o
- $(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \
- -L$(obj)../../examples/standalone -lstubs \
- $(PLATFORM_LIBS)
-
-$(obj)eeprom.srec: $(obj)eeprom
- $(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)eeprom.bin: $(obj)eeprom
- $(OBJCOPY) -S -O binary $< $@
-
-clean:
- rm -f $(SOBJS) $(OBJS) $(obj)eeprom \
- $(obj)eeprom.srec $(obj)eeprom.bin \
- $(obj)eeprom.o $(obj)eeprom_start.o
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-CONFIG_SYS_TEXT_BASE = 0x13FD0000
+++ /dev/null
-/*
- * (C) Copyright 2005
- * Ladislav Michl, 2N Telekomunikace, michl@2n.cz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Some code shamelessly stolen back from Robin Getz.
- */
-
-#include <common.h>
-#include <exports.h>
-#include <timestamp.h>
-#include <net.h>
-#include "../drivers/net/smc91111.h"
-
-static struct eth_device dev = {
- .iobase = CONFIG_SMC91111_BASE
-};
-
-static u16 read_eeprom_reg(u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_RELOAD, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout reading register %02x\n", reg);
- return 0;
- }
-
- return SMC_inw(&dev, GP_REG);
-}
-
-static int write_eeprom_reg(u16 value, u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
-
- SMC_outw(&dev, value, GP_REG);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_STORE, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout writing register %02x\n", reg);
- return 0;
- }
-
- return 1;
-}
-
-static int write_data(u16 *buf, int len)
-{
- u16 reg = 0x23;
-
- while (len--)
- write_eeprom_reg(*buf++, reg++);
-
- return 0;
-}
-
-static int verify_macaddr(char *s)
-{
- u16 reg;
- int i, err = 0;
-
- puts("HWaddr: ");
- for (i = 0; i < 3; i++) {
- reg = read_eeprom_reg(0x20 + i);
- printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
- if (s)
- err |= reg != ((u16 *)s)[i];
- }
-
- return err ? 0 : 1;
-}
-
-static int set_mac(char *s)
-{
- int i;
- char *e, eaddr[6];
-
- /* turn string into mac value */
- for (i = 0; i < 6; i++) {
- eaddr[i] = simple_strtoul(s, &e, 16);
- s = (*e) ? e+1 : e;
- }
-
- for (i = 0; i < 3; i++)
- write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
-
- return 0;
-}
-
-static int parse_element(char *s, unsigned char *buf, int len)
-{
- int cnt;
- char *p, num[3];
- unsigned char id;
-
- id = simple_strtoul(s, &p, 16);
- if (*p++ != ':')
- return -1;
- cnt = 2;
- num[2] = 0;
- for (; *p; p += 2) {
- if (p[1] == 0)
- return -2;
- if (cnt + 3 > len)
- return -3;
- num[0] = p[0];
- num[1] = p[1];
- buf[cnt++] = simple_strtoul(num, NULL, 16);
- }
- buf[0] = id;
- buf[1] = cnt - 2;
-
- return cnt;
-}
-
-int eeprom(int argc, char * const argv[])
-{
- int i, len, ret;
- unsigned char buf[58], *p;
-
- app_startup(argv);
- i = get_version();
- if (i != XF_VERSION) {
- printf("Using ABI version %d, but U-Boot provides %d\n",
- XF_VERSION, i);
- return 1;
- }
-
- if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
- puts("SMSC91111 not found\n");
- return 2;
- }
-
- /* Called without parameters - print MAC address */
- if (argc < 2) {
- verify_macaddr(NULL);
- return 0;
- }
-
- /* Print help message */
- if (argv[1][1] == 'h') {
- puts("VoiceBlue EEPROM writer\n"
- "Built: " U_BOOT_DATE " at " U_BOOT_TIME "\n"
- "Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
- return 0;
- }
-
- /* Try to parse information elements */
- len = sizeof(buf);
- p = buf;
- for (i = 2; i < argc; i++) {
- ret = parse_element(argv[i], p, len);
- switch (ret) {
- case -1:
- printf("Element %d: malformed\n", i - 1);
- return 3;
- case -2:
- printf("Element %d: odd character count\n", i - 1);
- return 3;
- case -3:
- puts("Out of EEPROM memory\n");
- return 3;
- default:
- p += ret;
- len -= ret;
- }
- }
-
- /* First argument (MAC) is mandatory */
- set_mac(argv[1]);
- if (verify_macaddr(argv[1])) {
- puts("*** HWaddr does not match! ***\n");
- return 4;
- }
-
- while (len--)
- *p++ = 0;
-
- write_data((u16 *)buf, sizeof(buf) >> 1);
-
- return 0;
-}
+++ /dev/null
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
- * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */
-
-OMAP5910_LPG1_BASE: .word 0xfffbd000
-OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800
-OMAP5910_MPU_TC_BASE: .word 0xfffecc00
-OMAP5910_MPU_CLKM_BASE: .word 0xfffece00
-OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800
-OMAP5910_DPLL1_BASE: .word 0xfffecf00
-OMAP5910_GPIO_BASE: .word 0xfffce000
-OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800
-OMAP5910_MPUI_BASE: .word 0xfffec900
-
-_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL
-_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK
-
-OMAP5910_MPUI_CTRL: .word 0x0000ff1b
-
-VAL_EMIFS_CS0_CONFIG: .word 0x00009090
-VAL_EMIFS_CS1_CONFIG: .word 0x00003031
-VAL_EMIFS_CS2_CONFIG: .word 0x00003031
-VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0
-VAL_EMIFS_DYN_WAIT: .word 0x00000000
-/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
- /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */
-VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003
-VAL_EMIFF_MRS: .word 0x00000037
-
-/*
- * GPIO04 - D4 (Onboard LED)
- * GPIO07 - LAN91C111 reset
- */
-GPIO_DIRECTION:
- .word 0x0000ff6f
-/*
- * Disable everything, but D4 LED (connected through invertor)
- */
-GPIO_OUTPUT:
- .word 0x00000010
-
-MUX_CONFIG_BASE:
- .word 0xfffe1000
-
-MUX_CONFIG_VALUES:
- .align 4
- .word 0x00000000 @ FUNC_MUX_CTRL_0
- .word 0x00000000 @ FUNC_MUX_CTRL_1
- .word 0x00000000 @ FUNC_MUX_CTRL_2
- .word 0x00000000 @ FUNC_MUX_CTRL_3
- .word 0x00000000 @ FUNC_MUX_CTRL_4
- .word 0x12082480 @ FUNC_MUX_CTRL_5
- .word 0x0000001c @ FUNC_MUX_CTRL_6
- .word 0x00000003 @ FUNC_MUX_CTRL_7
- .word 0x10001200 @ FUNC_MUX_CTRL_8
- .word 0x01201012 @ FUNC_MUX_CTRL_9
- .word 0x02081248 @ FUNC_MUX_CTRL_A
- .word 0x00001248 @ FUNC_MUX_CTRL_B
- .word 0x12240000 @ FUNC_MUX_CTRL_C
- .word 0x00002000 @ FUNC_MUX_CTRL_D
- .word 0x00000000 @ PULL_DWN_CTRL_0
- .word 0x0000085f @ PULL_DWN_CTRL_1
- .word 0x01001000 @ PULL_DWN_CTRL_2
- .word 0x00000000 @ PULL_DWN_CTRL_3
- .word 0x00000000 @ GATE_INH_CTRL_0
- .word 0x00000000 @ VOLTAGE_CTRL_0
- .word 0x00000000 @ TEST_DBG_CTRL_0
- .word 0x00000006 @ MOD_CONF_CTRL_0
- .word 0x0000eaef @ COMP_MODE_CTRL_0
-
-MUX_CONFIG_OFFSETS:
- .align 1
- .byte 0x00 @ FUNC_MUX_CTRL_0
- .byte 0x04 @ FUNC_MUX_CTRL_1
- .byte 0x08 @ FUNC_MUX_CTRL_2
- .byte 0x10 @ FUNC_MUX_CTRL_3
- .byte 0x14 @ FUNC_MUX_CTRL_4
- .byte 0x18 @ FUNC_MUX_CTRL_5
- .byte 0x1c @ FUNC_MUX_CTRL_6
- .byte 0x20 @ FUNC_MUX_CTRL_7
- .byte 0x24 @ FUNC_MUX_CTRL_8
- .byte 0x28 @ FUNC_MUX_CTRL_9
- .byte 0x2c @ FUNC_MUX_CTRL_A
- .byte 0x30 @ FUNC_MUX_CTRL_B
- .byte 0x34 @ FUNC_MUX_CTRL_C
- .byte 0x38 @ FUNC_MUX_CTRL_D
- .byte 0x40 @ PULL_DWN_CTRL_0
- .byte 0x44 @ PULL_DWN_CTRL_1
- .byte 0x48 @ PULL_DWN_CTRL_2
- .byte 0x4c @ PULL_DWN_CTRL_3
- .byte 0x50 @ GATE_INH_CTRL_0
- .byte 0x60 @ VOLTAGE_CTRL_0
- .byte 0x70 @ TEST_DBG_CTRL_0
- .byte 0x80 @ MOD_CONF_CTRL_0
- .byte 0x0c @ COMP_MODE_CTRL_0
- .byte 0xff
-
-.globl lowlevel_init
-lowlevel_init:
- /* Improve performance a bit... */
- mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
- mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
- mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
- orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
- mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
- mov r1, #0x00
- mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
- nop
- nop
- nop
- nop
-
- /* Setup clocking mode */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ prepare base of CLOCK unit
- ldrh r1, [r0, #0x18] @ get reset status
- bic r1, r1, #(7 << 11) @ clear clock select
- orr r1, r1, #(2 << 11) @ set synchronous scalable
- mov r2, #0 @ set wait counter to 100 clock cycles
-
-icache_loop:
- cmp r2, #0x01
- streqh r1, [r0, #0x18]
- add r2, r2, #0x01
- cmp r2, #0x10
- bne icache_loop
- nop
-
- /* Setup clock divisors */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- ldr r1, _OMAP5910_ARM_CKCTL
- orr r1, r1, #0x2000 @ enable DSP clock
- strh r1, [r0, #0x00] @ setup clock divisors
-
- /* Setup DPLL to generate requested freq */
- ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
- orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
- strh r1, [r0] @ write
-
-locking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #0x01
- beq locking @ while LOCK not set
-
- /* Enable clock */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- mov r1, #(1 << 10) @ disable idle mode do not check
- @ nWAKEUP pin, other remain active
- strh r1, [r0, #0x04]
- ldr r1, _OMAP5910_ARM_EN_CLK
- strh r1, [r0, #0x08]
- mov r1, #0x003f @ FLASH.RP not enabled in idle and
- @ max delayed ( 32 x CLKIN )
- strh r1, [r0, #0x0c]
-
- /* Configure 5910 pins functions to match our board. */
- ldr r0, MUX_CONFIG_BASE
- adr r1, MUX_CONFIG_VALUES
- adr r2, MUX_CONFIG_OFFSETS
-next_mux_cfg:
- ldrb r3, [r2], #1
- ldr r4, [r1], #4
- cmp r3, #0xff
- strne r4, [r0, r3]
- bne next_mux_cfg
-
- /* Configure GPIO pins (also enables onboard LED) */
- ldr r0, OMAP5910_GPIO_BASE
- ldr r1, GPIO_OUTPUT
- strh r1, [r0, #0x04]
- ldr r1, GPIO_DIRECTION
- strh r1, [r0, #0x08]
-
- /* EnablePeripherals */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit
- mov r1, #0x0001 @ Peripheral enable
- strh r1, [r0, #0x14]
-
- /* Program LED Pulse Generator */
- ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator
- mov r1, #0x7F @ Set obscure frequency in
- strb r1, [r0, #0x00] @ LCR
- mov r1, #0x01 @ Enable clock (CLK_EN) in
- strb r1, [r0, #0x04] @ PMR
-
- /* TIPB Lock UART1 */
- ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches
- mov r1, #1 @ ARM allocated
- strh r1, [r0,#0x04] @ clear IRQ line and status bits
- strh r1, [r0,#0x00]
- ldrh r1, [r0,#0x04]
-
- /* Disable watchdog */
- ldr r0, OMAP5910_MPU_WD_TIMER_BASE
- mov r1, #0xf5
- strh r1, [r0, #0x8]
- mov r1, #0xa0
- strh r1, [r0, #0x8]
-
- /* Enable MCLK */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE
- mov r1, #0x6
- strh r1, [r0, #0x34]
- strh r1, [r0, #0x34]
-
- /* Setup clock divisors */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register
-
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- strh r1, [r0] @ write
-
-ulocking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #1
- beq ulocking @ while LOCK not set
-
- /* EMIF init */
- ldr r0, OMAP5910_MPU_TC_BASE
- ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG
- bic r1, r1, #0x0c @ pwr down disabled, flash WP
- orr r1, r1, #0x01
- str r1, [r0, #0x0c]
-
- ldr r1, VAL_EMIFS_CS0_CONFIG
- str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG
- ldr r1, VAL_EMIFS_CS1_CONFIG
- str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG
- ldr r1, VAL_EMIFS_CS2_CONFIG
- str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG
- ldr r1, VAL_EMIFS_CS3_CONFIG
- str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG
- ldr r1, VAL_EMIFS_DYN_WAIT
- str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT
-
- /* Setup SDRAM */
- ldr r1, VAL_EMIFF_SDRAM_CONFIG
- str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG
- ldr r1, VAL_EMIFF_SDRAM_CONFIG2
- str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2
- ldr r1, VAL_EMIFF_MRS
- str r1, [r0, #0x24] @ EMIFF_MRS
- /* SDRAM needs 100us to stabilize */
- mov r0, #0x4000
-sdelay:
- subs r0, r0, #0x1
- bne sdelay
-
- /* back to arch calling code */
- mov pc, lr
-.end
+++ /dev/null
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa;
-
- /* arch number of VoiceBlue board */
- gd->bd->bi_arch_number = MACH_TYPE_VOICEBLUE;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
- return 0;
-}
-
-int dram_init(void)
-{
- *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff;
-
- /* Take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete. */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
- udelay(10); /* doesn't work before timer_init call */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
- udelay(500);
-
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-int misc_init_r(void)
-{
- *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0x55;
-
- return 0;
-}
-
-int board_late_init(void)
-{
- *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0x00;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
cm41xx arm arm920t - - ks8695
VCMA9 arm arm920t vcma9 mpl s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
-voiceblue arm arm925t
omap1510inn arm arm925t - ti
integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap
integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+voiceblue arm arm925t - 2011-07-17
smdk2400 arm arm920t - 2011-07-17 Gary Jennejohn <garyj@denx.de>
sbc2410x arm arm920t - 2011-07-17
netstar arm arm925t - 2011-07-17
+++ /dev/null
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * Configuation settings for the TI OMAP VoiceBlue board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/omap1510.h>
-
-#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP1510 1 /* which is in a 5910 */
-
-/* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */
-#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R /* There is nothing to really init */
-#define BOARD_LATE_INIT /* but we flash the LEDs here */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x10000000
-#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
-#define PHYS_FLASH_1 0x0000000
-
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool and stack
- */
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-#define CONFIG_STACKSIZE (1 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ)
-#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x08000300
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-
-/*
- * Command line configuration
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_LOOPW
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_SYS_AUTOLOAD "n"
-#define CONFIG_BOOTCOMMAND "run nboot"
-#define CONFIG_PREBOOT "run setup"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "silent=1\0" \
- "ospart=0\0" \
- "bootfile=/boot/uImage\0" \
- "setpart=" \
- "if test -n $swapos; then " \
- "setenv swapos; saveenv; " \
- "if test $ospart -eq 0; then " \
- "setenv ospart 1; " \
- "else " \
- "setenv ospart 0; " \
- "fi; " \
- "fi\0" \
- "setup=setenv bootargs console=ttyS0,$baudrate " \
- "mtdparts=$mtdparts\0" \
- "nfsargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
- "nfsroot=$rootpath root=/dev/nfs\0" \
- "flashargs=run setpart; setenv bootargs $bootargs " \
- "root=mtd:data$ospart ro " \
- "rootfstype=jffs2\0" \
- "initrdargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
- "fboot=run flashargs; chpart data$ospart; fsload; bootm\0" \
- "mboot=bootp; run initrdargs; tftp; bootm\0" \
- "nboot=bootp; run nfsargs; tftp; bootm\0"
-
-#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
-
-#if 1 /* feel free to disable for development */
-#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT "\nVoiceBlue Enterprise - booting...\n"
-#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */
-#endif
-
-/*
- * Partitions (mtdparts command line support)
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
- "256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "# "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1)
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
- (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE))
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000)
-
-/*
- * The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE
-#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ 1000
-
-#define OMAP5910_DPLL_DIV 1
-#define OMAP5910_DPLL_MUL \
- ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
-
-#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
-#define OMAP5910_LCD_DIV 2 /* CKL/4 */
-#define OMAP5910_ARM_DIV 0 /* CKL/1 */
-#define OMAP5910_DSP_DIV 0 /* CKL/1 */
-#define OMAP5910_TC_DIV 1 /* CKL/2 */
-#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
-#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */
-
-#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */
-#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \
- (OMAP5910_LCD_DIV << 2) | \
- (OMAP5910_ARM_DIV << 4) | \
- (OMAP5910_DSP_DIV << 6) | \
- (OMAP5910_TC_DIV << 8) | \
- (OMAP5910_DSP_MMU_DIV << 10) | \
- (OMAP5910_ARM_TIM_SEL << 12))
-
-#define VOICEBLUE_LED_REG 0x04030000
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / commitdiff