ARM: dts: exynos: Remove the display-timing and delay from Rinato

The display-timing and delay are included in the panel driver so they
should be removed from dts.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 0b45467..ff792ff 100644 (file)
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -227,28 +227,6 @@
                vci-supply = <&ldo20_reg>;
                reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
                te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
-               power-on-delay= <30>;
-               power-off-delay= <120>;
-               reset-delay = <5>;
-               init-delay = <100>;
-               flip-horizontal;
-               flip-vertical;
-               panel-width-mm = <29>;
-               panel-height-mm = <29>;
-
-               display-timings {
-                       timing-0 {
-                               clock-frequency = <4600000>;
-                               hactive = <320>;
-                               vactive = <320>;
-                               hfront-porch = <1>;
-                               hback-porch = <1>;
-                               hsync-len = <1>;
-                               vfront-porch = <150>;
-                               vback-porch = <1>;
-                               vsync-len = <2>;
-                       };
-               };
        };
 };