Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
+config MFD_RC5T583
+ bool "Ricoh RC5T583 Power Management system device"
+ depends on I2C && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Select this option to get support for the RICOH583 Power
+ Management system device.
+ This driver provides common support for accessing the device
+ through i2c interface. The device supports multiple sub-devices
+ like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
+ Additional drivers must be enabled in order to use the
+ different functionality of the device.
+
endmenu
endif
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
+obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_S5M_CORE) += s5m-core.o s5m-irq.o
--- /dev/null
+/*
+ * Interrupt driver for RICOH583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * based on code
+ * Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mfd/rc5t583.h>
+
+enum int_type {
+ SYS_INT = 0x1,
+ DCDC_INT = 0x2,
+ RTC_INT = 0x4,
+ ADC_INT = 0x8,
+ GPIO_INT = 0x10,
+};
+
+static int gpedge_add[] = {
+ RC5T583_GPIO_GPEDGE2,
+ RC5T583_GPIO_GPEDGE2
+};
+
+static int irq_en_add[] = {
+ RC5T583_INT_EN_SYS1,
+ RC5T583_INT_EN_SYS2,
+ RC5T583_INT_EN_DCDC,
+ RC5T583_INT_EN_RTC,
+ RC5T583_INT_EN_ADC1,
+ RC5T583_INT_EN_ADC2,
+ RC5T583_INT_EN_ADC3,
+ RC5T583_GPIO_EN_INT
+};
+
+static int irq_mon_add[] = {
+ RC5T583_INT_MON_SYS1,
+ RC5T583_INT_MON_SYS2,
+ RC5T583_INT_MON_DCDC,
+ RC5T583_INT_MON_RTC,
+ RC5T583_INT_IR_ADCL,
+ RC5T583_INT_IR_ADCH,
+ RC5T583_INT_IR_ADCEND,
+ RC5T583_INT_IR_GPIOF,
+ RC5T583_INT_IR_GPIOR
+};
+
+static int irq_clr_add[] = {
+ RC5T583_INT_IR_SYS1,
+ RC5T583_INT_IR_SYS2,
+ RC5T583_INT_IR_DCDC,
+ RC5T583_INT_IR_RTC,
+ RC5T583_INT_IR_ADCL,
+ RC5T583_INT_IR_ADCH,
+ RC5T583_INT_IR_ADCEND,
+ RC5T583_INT_IR_GPIOF,
+ RC5T583_INT_IR_GPIOR
+};
+
+static int main_int_type[] = {
+ SYS_INT,
+ SYS_INT,
+ DCDC_INT,
+ RTC_INT,
+ ADC_INT,
+ ADC_INT,
+ ADC_INT,
+ GPIO_INT,
+ GPIO_INT,
+};
+
+struct rc5t583_irq_data {
+ u8 int_type;
+ u8 master_bit;
+ u8 int_en_bit;
+ u8 mask_reg_index;
+ int grp_index;
+};
+
+#define RC5T583_IRQ(_int_type, _master_bit, _grp_index, \
+ _int_bit, _mask_ind) \
+ { \
+ .int_type = _int_type, \
+ .master_bit = _master_bit, \
+ .grp_index = _grp_index, \
+ .int_en_bit = _int_bit, \
+ .mask_reg_index = _mask_ind, \
+ }
+
+static const struct rc5t583_irq_data rc5t583_irqs[RC5T583_MAX_IRQS] = {
+ [RC5T583_IRQ_ONKEY] = RC5T583_IRQ(SYS_INT, 0, 0, 0, 0),
+ [RC5T583_IRQ_ACOK] = RC5T583_IRQ(SYS_INT, 0, 1, 1, 0),
+ [RC5T583_IRQ_LIDOPEN] = RC5T583_IRQ(SYS_INT, 0, 2, 2, 0),
+ [RC5T583_IRQ_PREOT] = RC5T583_IRQ(SYS_INT, 0, 3, 3, 0),
+ [RC5T583_IRQ_CLKSTP] = RC5T583_IRQ(SYS_INT, 0, 4, 4, 0),
+ [RC5T583_IRQ_ONKEY_OFF] = RC5T583_IRQ(SYS_INT, 0, 5, 5, 0),
+ [RC5T583_IRQ_WD] = RC5T583_IRQ(SYS_INT, 0, 7, 7, 0),
+ [RC5T583_IRQ_EN_PWRREQ1] = RC5T583_IRQ(SYS_INT, 0, 8, 0, 1),
+ [RC5T583_IRQ_EN_PWRREQ2] = RC5T583_IRQ(SYS_INT, 0, 9, 1, 1),
+ [RC5T583_IRQ_PRE_VINDET] = RC5T583_IRQ(SYS_INT, 0, 10, 2, 1),
+
+ [RC5T583_IRQ_DC0LIM] = RC5T583_IRQ(DCDC_INT, 1, 0, 0, 2),
+ [RC5T583_IRQ_DC1LIM] = RC5T583_IRQ(DCDC_INT, 1, 1, 1, 2),
+ [RC5T583_IRQ_DC2LIM] = RC5T583_IRQ(DCDC_INT, 1, 2, 2, 2),
+ [RC5T583_IRQ_DC3LIM] = RC5T583_IRQ(DCDC_INT, 1, 3, 3, 2),
+
+ [RC5T583_IRQ_CTC] = RC5T583_IRQ(RTC_INT, 2, 0, 0, 3),
+ [RC5T583_IRQ_YALE] = RC5T583_IRQ(RTC_INT, 2, 5, 5, 3),
+ [RC5T583_IRQ_DALE] = RC5T583_IRQ(RTC_INT, 2, 6, 6, 3),
+ [RC5T583_IRQ_WALE] = RC5T583_IRQ(RTC_INT, 2, 7, 7, 3),
+
+ [RC5T583_IRQ_AIN1L] = RC5T583_IRQ(ADC_INT, 3, 0, 0, 4),
+ [RC5T583_IRQ_AIN2L] = RC5T583_IRQ(ADC_INT, 3, 1, 1, 4),
+ [RC5T583_IRQ_AIN3L] = RC5T583_IRQ(ADC_INT, 3, 2, 2, 4),
+ [RC5T583_IRQ_VBATL] = RC5T583_IRQ(ADC_INT, 3, 3, 3, 4),
+ [RC5T583_IRQ_VIN3L] = RC5T583_IRQ(ADC_INT, 3, 4, 4, 4),
+ [RC5T583_IRQ_VIN8L] = RC5T583_IRQ(ADC_INT, 3, 5, 5, 4),
+ [RC5T583_IRQ_AIN1H] = RC5T583_IRQ(ADC_INT, 3, 6, 0, 5),
+ [RC5T583_IRQ_AIN2H] = RC5T583_IRQ(ADC_INT, 3, 7, 1, 5),
+ [RC5T583_IRQ_AIN3H] = RC5T583_IRQ(ADC_INT, 3, 8, 2, 5),
+ [RC5T583_IRQ_VBATH] = RC5T583_IRQ(ADC_INT, 3, 9, 3, 5),
+ [RC5T583_IRQ_VIN3H] = RC5T583_IRQ(ADC_INT, 3, 10, 4, 5),
+ [RC5T583_IRQ_VIN8H] = RC5T583_IRQ(ADC_INT, 3, 11, 5, 5),
+ [RC5T583_IRQ_ADCEND] = RC5T583_IRQ(ADC_INT, 3, 12, 0, 6),
+
+ [RC5T583_IRQ_GPIO0] = RC5T583_IRQ(GPIO_INT, 4, 0, 0, 7),
+ [RC5T583_IRQ_GPIO1] = RC5T583_IRQ(GPIO_INT, 4, 1, 1, 7),
+ [RC5T583_IRQ_GPIO2] = RC5T583_IRQ(GPIO_INT, 4, 2, 2, 7),
+ [RC5T583_IRQ_GPIO3] = RC5T583_IRQ(GPIO_INT, 4, 3, 3, 7),
+ [RC5T583_IRQ_GPIO4] = RC5T583_IRQ(GPIO_INT, 4, 4, 4, 7),
+ [RC5T583_IRQ_GPIO5] = RC5T583_IRQ(GPIO_INT, 4, 5, 5, 7),
+ [RC5T583_IRQ_GPIO6] = RC5T583_IRQ(GPIO_INT, 4, 6, 6, 7),
+ [RC5T583_IRQ_GPIO7] = RC5T583_IRQ(GPIO_INT, 4, 7, 7, 7),
+};
+
+static void rc5t583_irq_lock(struct irq_data *irq_data)
+{
+ struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+ mutex_lock(&rc5t583->irq_lock);
+}
+
+static void rc5t583_irq_unmask(struct irq_data *irq_data)
+{
+ struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+ unsigned int __irq = irq_data->irq - rc5t583->irq_base;
+ const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq];
+
+ rc5t583->group_irq_en[data->grp_index] |= 1 << data->grp_index;
+ rc5t583->intc_inten_reg |= 1 << data->master_bit;
+ rc5t583->irq_en_reg[data->mask_reg_index] |= 1 << data->int_en_bit;
+}
+
+static void rc5t583_irq_mask(struct irq_data *irq_data)
+{
+ struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+ unsigned int __irq = irq_data->irq - rc5t583->irq_base;
+ const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq];
+
+ rc5t583->group_irq_en[data->grp_index] &= ~(1 << data->grp_index);
+ if (!rc5t583->group_irq_en[data->grp_index])
+ rc5t583->intc_inten_reg &= ~(1 << data->master_bit);
+
+ rc5t583->irq_en_reg[data->mask_reg_index] &= ~(1 << data->int_en_bit);
+}
+
+static int rc5t583_irq_set_type(struct irq_data *irq_data, unsigned int type)
+{
+ struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+ unsigned int __irq = irq_data->irq - rc5t583->irq_base;
+ const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq];
+ int val = 0;
+ int gpedge_index;
+ int gpedge_bit_pos;
+
+ /* Supporting only trigger level inetrrupt */
+ if ((data->int_type & GPIO_INT) && (type & IRQ_TYPE_EDGE_BOTH)) {
+ gpedge_index = data->int_en_bit / 4;
+ gpedge_bit_pos = data->int_en_bit % 4;
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ val |= 0x2;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ val |= 0x1;
+
+ rc5t583->gpedge_reg[gpedge_index] &= ~(3 << gpedge_bit_pos);
+ rc5t583->gpedge_reg[gpedge_index] |= (val << gpedge_bit_pos);
+ rc5t583_irq_unmask(irq_data);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static void rc5t583_irq_sync_unlock(struct irq_data *irq_data)
+{
+ struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+ int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(rc5t583->gpedge_reg); i++) {
+ ret = rc5t583_write(rc5t583->dev, gpedge_add[i],
+ rc5t583->gpedge_reg[i]);
+ if (ret < 0)
+ dev_warn(rc5t583->dev,
+ "Error in writing reg 0x%02x error: %d\n",
+ gpedge_add[i], ret);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(rc5t583->irq_en_reg); i++) {
+ ret = rc5t583_write(rc5t583->dev, irq_en_add[i],
+ rc5t583->irq_en_reg[i]);
+ if (ret < 0)
+ dev_warn(rc5t583->dev,
+ "Error in writing reg 0x%02x error: %d\n",
+ irq_en_add[i], ret);
+ }
+
+ ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN,
+ rc5t583->intc_inten_reg);
+ if (ret < 0)
+ dev_warn(rc5t583->dev,
+ "Error in writing reg 0x%02x error: %d\n",
+ RC5T583_INTC_INTEN, ret);
+
+ mutex_unlock(&rc5t583->irq_lock);
+}
+#ifdef CONFIG_PM_SLEEP
+static int rc5t583_irq_set_wake(struct irq_data *irq_data, unsigned int on)
+{
+ struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+ return irq_set_irq_wake(rc5t583->chip_irq, on);
+}
+#else
+#define rc5t583_irq_set_wake NULL
+#endif
+
+static irqreturn_t rc5t583_irq(int irq, void *data)
+{
+ struct rc5t583 *rc5t583 = data;
+ uint8_t int_sts[RC5T583_MAX_INTERRUPT_MASK_REGS];
+ uint8_t master_int;
+ int i;
+ int ret;
+ unsigned int rtc_int_sts = 0;
+
+ /* Clear the status */
+ for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++)
+ int_sts[i] = 0;
+
+ ret = rc5t583_read(rc5t583->dev, RC5T583_INTC_INTMON, &master_int);
+ if (ret < 0) {
+ dev_err(rc5t583->dev,
+ "Error in reading reg 0x%02x error: %d\n",
+ RC5T583_INTC_INTMON, ret);
+ return IRQ_HANDLED;
+ }
+
+ for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; ++i) {
+ if (!(master_int & main_int_type[i]))
+ continue;
+
+ ret = rc5t583_read(rc5t583->dev, irq_mon_add[i], &int_sts[i]);
+ if (ret < 0) {
+ dev_warn(rc5t583->dev,
+ "Error in reading reg 0x%02x error: %d\n",
+ irq_mon_add[i], ret);
+ int_sts[i] = 0;
+ continue;
+ }
+
+ if (main_int_type[i] & RTC_INT) {
+ rtc_int_sts = 0;
+ if (int_sts[i] & 0x1)
+ rtc_int_sts |= BIT(6);
+ if (int_sts[i] & 0x2)
+ rtc_int_sts |= BIT(7);
+ if (int_sts[i] & 0x4)
+ rtc_int_sts |= BIT(0);
+ if (int_sts[i] & 0x8)
+ rtc_int_sts |= BIT(5);
+ }
+
+ ret = rc5t583_write(rc5t583->dev, irq_clr_add[i],
+ ~int_sts[i]);
+ if (ret < 0)
+ dev_warn(rc5t583->dev,
+ "Error in reading reg 0x%02x error: %d\n",
+ irq_clr_add[i], ret);
+
+ if (main_int_type[i] & RTC_INT)
+ int_sts[i] = rtc_int_sts;
+ }
+
+ /* Merge gpio interrupts for rising and falling case*/
+ int_sts[7] |= int_sts[8];
+
+ /* Call interrupt handler if enabled */
+ for (i = 0; i < RC5T583_MAX_IRQS; ++i) {
+ const struct rc5t583_irq_data *data = &rc5t583_irqs[i];
+ if ((int_sts[data->mask_reg_index] & (1 << data->int_en_bit)) &&
+ (rc5t583->group_irq_en[data->master_bit] &
+ (1 << data->grp_index)))
+ handle_nested_irq(rc5t583->irq_base + i);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irq_chip rc5t583_irq_chip = {
+ .name = "rc5t583-irq",
+ .irq_mask = rc5t583_irq_mask,
+ .irq_unmask = rc5t583_irq_unmask,
+ .irq_bus_lock = rc5t583_irq_lock,
+ .irq_bus_sync_unlock = rc5t583_irq_sync_unlock,
+ .irq_set_type = rc5t583_irq_set_type,
+ .irq_set_wake = rc5t583_irq_set_wake,
+};
+
+int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base)
+{
+ int i, ret;
+
+ if (!irq_base) {
+ dev_warn(rc5t583->dev, "No interrupt support on IRQ base\n");
+ return -EINVAL;
+ }
+
+ mutex_init(&rc5t583->irq_lock);
+
+ /* Initailize all int register to 0 */
+ for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) {
+ ret = rc5t583_write(rc5t583->dev, irq_en_add[i],
+ rc5t583->irq_en_reg[i]);
+ if (ret < 0)
+ dev_warn(rc5t583->dev,
+ "Error in writing reg 0x%02x error: %d\n",
+ irq_en_add[i], ret);
+ }
+
+ for (i = 0; i < RC5T583_MAX_GPEDGE_REG; i++) {
+ ret = rc5t583_write(rc5t583->dev, gpedge_add[i],
+ rc5t583->gpedge_reg[i]);
+ if (ret < 0)
+ dev_warn(rc5t583->dev,
+ "Error in writing reg 0x%02x error: %d\n",
+ gpedge_add[i], ret);
+ }
+
+ ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN, 0x0);
+ if (ret < 0)
+ dev_warn(rc5t583->dev,
+ "Error in writing reg 0x%02x error: %d\n",
+ RC5T583_INTC_INTEN, ret);
+
+ /* Clear all interrupts in case they woke up active. */
+ for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) {
+ ret = rc5t583_write(rc5t583->dev, irq_clr_add[i], 0);
+ if (ret < 0)
+ dev_warn(rc5t583->dev,
+ "Error in writing reg 0x%02x error: %d\n",
+ irq_clr_add[i], ret);
+ }
+
+ rc5t583->irq_base = irq_base;
+ rc5t583->chip_irq = irq;
+
+ for (i = 0; i < RC5T583_MAX_IRQS; i++) {
+ int __irq = i + rc5t583->irq_base;
+ irq_set_chip_data(__irq, rc5t583);
+ irq_set_chip_and_handler(__irq, &rc5t583_irq_chip,
+ handle_simple_irq);
+ irq_set_nested_thread(__irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(__irq, IRQF_VALID);
+#endif
+ }
+
+ ret = request_threaded_irq(irq, NULL, rc5t583_irq, IRQF_ONESHOT,
+ "rc5t583", rc5t583);
+ if (ret < 0)
+ dev_err(rc5t583->dev,
+ "Error in registering interrupt error: %d\n", ret);
+ return ret;
+}
+
+int rc5t583_irq_exit(struct rc5t583 *rc5t583)
+{
+ if (rc5t583->chip_irq)
+ free_irq(rc5t583->chip_irq, rc5t583);
+ return 0;
+}
--- /dev/null
+/*
+ * Core driver access RC5T583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ * Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rc5t583.h>
+#include <linux/regmap.h>
+
+#define RICOH_ONOFFSEL_REG 0x10
+#define RICOH_SWCTL_REG 0x5E
+
+struct deepsleep_control_data {
+ u8 reg_add;
+ u8 ds_pos_bit;
+};
+
+#define DEEPSLEEP_INIT(_id, _reg, _pos) \
+ { \
+ .reg_add = RC5T583_##_reg, \
+ .ds_pos_bit = _pos, \
+ }
+
+static struct deepsleep_control_data deepsleep_data[] = {
+ DEEPSLEEP_INIT(DC0, SLPSEQ1, 0),
+ DEEPSLEEP_INIT(DC1, SLPSEQ1, 4),
+ DEEPSLEEP_INIT(DC2, SLPSEQ2, 0),
+ DEEPSLEEP_INIT(DC3, SLPSEQ2, 4),
+ DEEPSLEEP_INIT(LDO0, SLPSEQ3, 0),
+ DEEPSLEEP_INIT(LDO1, SLPSEQ3, 4),
+ DEEPSLEEP_INIT(LDO2, SLPSEQ4, 0),
+ DEEPSLEEP_INIT(LDO3, SLPSEQ4, 4),
+ DEEPSLEEP_INIT(LDO4, SLPSEQ5, 0),
+ DEEPSLEEP_INIT(LDO5, SLPSEQ5, 4),
+ DEEPSLEEP_INIT(LDO6, SLPSEQ6, 0),
+ DEEPSLEEP_INIT(LDO7, SLPSEQ6, 4),
+ DEEPSLEEP_INIT(LDO8, SLPSEQ7, 0),
+ DEEPSLEEP_INIT(LDO9, SLPSEQ7, 4),
+ DEEPSLEEP_INIT(PSO0, SLPSEQ8, 0),
+ DEEPSLEEP_INIT(PSO1, SLPSEQ8, 4),
+ DEEPSLEEP_INIT(PSO2, SLPSEQ9, 0),
+ DEEPSLEEP_INIT(PSO3, SLPSEQ9, 4),
+ DEEPSLEEP_INIT(PSO4, SLPSEQ10, 0),
+ DEEPSLEEP_INIT(PSO5, SLPSEQ10, 4),
+ DEEPSLEEP_INIT(PSO6, SLPSEQ11, 0),
+ DEEPSLEEP_INIT(PSO7, SLPSEQ11, 4),
+};
+
+#define EXT_PWR_REQ \
+ (RC5T583_EXT_PWRREQ1_CONTROL | RC5T583_EXT_PWRREQ2_CONTROL)
+
+static struct mfd_cell rc5t583_subdevs[] = {
+ {.name = "rc5t583-regulator",},
+ {.name = "rc5t583-rtc", },
+ {.name = "rc5t583-key", }
+};
+
+int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val)
+{
+ struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+ return regmap_write(rc5t583->regmap, reg, val);
+}
+
+int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val)
+{
+ struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+ unsigned int ival;
+ int ret;
+ ret = regmap_read(rc5t583->regmap, reg, &ival);
+ if (!ret)
+ *val = (uint8_t)ival;
+ return ret;
+}
+
+int rc5t583_set_bits(struct device *dev, unsigned int reg,
+ unsigned int bit_mask)
+{
+ struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+ return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask);
+}
+
+int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+ unsigned int bit_mask)
+{
+ struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+ return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0);
+}
+
+int rc5t583_update(struct device *dev, unsigned int reg,
+ unsigned int val, unsigned int mask)
+{
+ struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+ return regmap_update_bits(rc5t583->regmap, reg, mask, val);
+}
+
+static int __rc5t583_set_ext_pwrreq1_control(struct device *dev,
+ int id, int ext_pwr, int slots)
+{
+ int ret;
+ uint8_t sleepseq_val;
+ unsigned int en_bit;
+ unsigned int slot_bit;
+
+ if (id == RC5T583_DS_DC0) {
+ dev_err(dev, "PWRREQ1 is invalid control for rail %d\n", id);
+ return -EINVAL;
+ }
+
+ en_bit = deepsleep_data[id].ds_pos_bit;
+ slot_bit = en_bit + 1;
+ ret = rc5t583_read(dev, deepsleep_data[id].reg_add, &sleepseq_val);
+ if (ret < 0) {
+ dev_err(dev, "Error in reading reg 0x%x\n",
+ deepsleep_data[id].reg_add);
+ return ret;
+ }
+
+ sleepseq_val &= ~(0xF << en_bit);
+ sleepseq_val |= BIT(en_bit);
+ sleepseq_val |= ((slots & 0x7) << slot_bit);
+ ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(1));
+ if (ret < 0) {
+ dev_err(dev, "Error in updating the 0x%02x register\n",
+ RICOH_ONOFFSEL_REG);
+ return ret;
+ }
+
+ ret = rc5t583_write(dev, deepsleep_data[id].reg_add, sleepseq_val);
+ if (ret < 0) {
+ dev_err(dev, "Error in writing reg 0x%x\n",
+ deepsleep_data[id].reg_add);
+ return ret;
+ }
+
+ if (id == RC5T583_DS_LDO4) {
+ ret = rc5t583_write(dev, RICOH_SWCTL_REG, 0x1);
+ if (ret < 0)
+ dev_err(dev, "Error in writing reg 0x%x\n",
+ RICOH_SWCTL_REG);
+ }
+ return ret;
+}
+
+static int __rc5t583_set_ext_pwrreq2_control(struct device *dev,
+ int id, int ext_pwr)
+{
+ int ret;
+
+ if (id != RC5T583_DS_DC0) {
+ dev_err(dev, "PWRREQ2 is invalid control for rail %d\n", id);
+ return -EINVAL;
+ }
+
+ ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(2));
+ if (ret < 0)
+ dev_err(dev, "Error in updating the ONOFFSEL 0x10 register\n");
+ return ret;
+}
+
+int rc5t583_ext_power_req_config(struct device *dev, int ds_id,
+ int ext_pwr_req, int deepsleep_slot_nr)
+{
+ if ((ext_pwr_req & EXT_PWR_REQ) == EXT_PWR_REQ)
+ return -EINVAL;
+
+ if (ext_pwr_req & RC5T583_EXT_PWRREQ1_CONTROL)
+ return __rc5t583_set_ext_pwrreq1_control(dev, ds_id,
+ ext_pwr_req, deepsleep_slot_nr);
+
+ if (ext_pwr_req & RC5T583_EXT_PWRREQ2_CONTROL)
+ return __rc5t583_set_ext_pwrreq2_control(dev,
+ ds_id, ext_pwr_req);
+ return 0;
+}
+
+static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583,
+ struct rc5t583_platform_data *pdata)
+{
+ int ret;
+ int i;
+ uint8_t on_off_val = 0;
+
+ /* Clear ONOFFSEL register */
+ if (pdata->enable_shutdown)
+ on_off_val = 0x1;
+
+ ret = rc5t583_write(rc5t583->dev, RICOH_ONOFFSEL_REG, on_off_val);
+ if (ret < 0)
+ dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n",
+ RICOH_ONOFFSEL_REG, ret);
+
+ ret = rc5t583_write(rc5t583->dev, RICOH_SWCTL_REG, 0x0);
+ if (ret < 0)
+ dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n",
+ RICOH_SWCTL_REG, ret);
+
+ /* Clear sleep sequence register */
+ for (i = RC5T583_SLPSEQ1; i <= RC5T583_SLPSEQ11; ++i) {
+ ret = rc5t583_write(rc5t583->dev, i, 0x0);
+ if (ret < 0)
+ dev_warn(rc5t583->dev,
+ "Error in writing reg 0x%02x error: %d\n",
+ i, ret);
+ }
+ return 0;
+}
+
+static bool volatile_reg(struct device *dev, unsigned int reg)
+{
+ /* Enable caching in interrupt registers */
+ switch (reg) {
+ case RC5T583_INT_EN_SYS1:
+ case RC5T583_INT_EN_SYS2:
+ case RC5T583_INT_EN_DCDC:
+ case RC5T583_INT_EN_RTC:
+ case RC5T583_INT_EN_ADC1:
+ case RC5T583_INT_EN_ADC2:
+ case RC5T583_INT_EN_ADC3:
+ case RC5T583_GPIO_GPEDGE1:
+ case RC5T583_GPIO_GPEDGE2:
+ case RC5T583_GPIO_EN_INT:
+ return false;
+
+ case RC5T583_GPIO_MON_IOIN:
+ /* This is gpio input register */
+ return true;
+
+ default:
+ /* Enable caching in gpio registers */
+ if ((reg >= RC5T583_GPIO_IOSEL) &&
+ (reg <= RC5T583_GPIO_GPOFUNC))
+ return false;
+
+ /* Enable caching in sleep seq registers */
+ if ((reg >= RC5T583_SLPSEQ1) && (reg <= RC5T583_SLPSEQ11))
+ return false;
+
+ /* Enable caching of regulator registers */
+ if ((reg >= RC5T583_REG_DC0CTL) && (reg <= RC5T583_REG_SR3CTL))
+ return false;
+ if ((reg >= RC5T583_REG_LDOEN1) &&
+ (reg <= RC5T583_REG_LDO9DAC_DS))
+ return false;
+
+ break;
+ }
+
+ return true;
+}
+
+static const struct regmap_config rc5t583_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_reg = volatile_reg,
+ .max_register = RC5T583_MAX_REGS,
+ .num_reg_defaults_raw = RC5T583_MAX_REGS,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct rc5t583 *rc5t583;
+ struct rc5t583_platform_data *pdata = i2c->dev.platform_data;
+ int ret;
+ bool irq_init_success = false;
+
+ if (!pdata) {
+ dev_err(&i2c->dev, "Err: Platform data not found\n");
+ return -EINVAL;
+ }
+
+ rc5t583 = devm_kzalloc(&i2c->dev, sizeof(struct rc5t583), GFP_KERNEL);
+ if (!rc5t583) {
+ dev_err(&i2c->dev, "Memory allocation failed\n");
+ return -ENOMEM;
+ }
+
+ rc5t583->dev = &i2c->dev;
+ i2c_set_clientdata(i2c, rc5t583);
+
+ rc5t583->regmap = regmap_init_i2c(i2c, &rc5t583_regmap_config);
+ if (IS_ERR(rc5t583->regmap)) {
+ ret = PTR_ERR(rc5t583->regmap);
+ dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = rc5t583_clear_ext_power_req(rc5t583, pdata);
+ if (ret < 0)
+ goto err_irq_init;
+
+ if (i2c->irq) {
+ ret = rc5t583_irq_init(rc5t583, i2c->irq, pdata->irq_base);
+ /* Still continue with waring if irq init fails */
+ if (ret)
+ dev_warn(&i2c->dev, "IRQ init failed: %d\n", ret);
+ else
+ irq_init_success = true;
+ }
+
+ ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs,
+ ARRAY_SIZE(rc5t583_subdevs), NULL, 0);
+ if (ret) {
+ dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret);
+ goto err_add_devs;
+ }
+
+ return 0;
+
+err_add_devs:
+ if (irq_init_success)
+ rc5t583_irq_exit(rc5t583);
+err_irq_init:
+ regmap_exit(rc5t583->regmap);
+ return ret;
+}
+
+static int __devexit rc5t583_i2c_remove(struct i2c_client *i2c)
+{
+ struct rc5t583 *rc5t583 = i2c_get_clientdata(i2c);
+
+ mfd_remove_devices(rc5t583->dev);
+ rc5t583_irq_exit(rc5t583);
+ regmap_exit(rc5t583->regmap);
+ return 0;
+}
+
+static const struct i2c_device_id rc5t583_i2c_id[] = {
+ {.name = "rc5t583", .driver_data = 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, rc5t583_i2c_id);
+
+static struct i2c_driver rc5t583_i2c_driver = {
+ .driver = {
+ .name = "rc5t583",
+ .owner = THIS_MODULE,
+ },
+ .probe = rc5t583_i2c_probe,
+ .remove = __devexit_p(rc5t583_i2c_remove),
+ .id_table = rc5t583_i2c_id,
+};
+
+static int __init rc5t583_i2c_init(void)
+{
+ return i2c_add_driver(&rc5t583_i2c_driver);
+}
+subsys_initcall(rc5t583_i2c_init);
+
+static void __exit rc5t583_i2c_exit(void)
+{
+ i2c_del_driver(&rc5t583_i2c_driver);
+}
+
+module_exit(rc5t583_i2c_exit);
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("RICOH RC5T583 power management system device driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * Core driver interface to access RICOH_RC5T583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ * Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __LINUX_MFD_RC5T583_H
+#define __LINUX_MFD_RC5T583_H
+
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#define RC5T583_MAX_REGS 0xF8
+
+/* Maximum number of main interrupts */
+#define MAX_MAIN_INTERRUPT 5
+#define RC5T583_MAX_GPEDGE_REG 2
+#define RC5T583_MAX_INTERRUPT_MASK_REGS 9
+
+/* Interrupt enable register */
+#define RC5T583_INT_EN_SYS1 0x19
+#define RC5T583_INT_EN_SYS2 0x1D
+#define RC5T583_INT_EN_DCDC 0x41
+#define RC5T583_INT_EN_RTC 0xED
+#define RC5T583_INT_EN_ADC1 0x90
+#define RC5T583_INT_EN_ADC2 0x91
+#define RC5T583_INT_EN_ADC3 0x92
+
+/* Interrupt status registers (monitor regs in Ricoh)*/
+#define RC5T583_INTC_INTPOL 0xAD
+#define RC5T583_INTC_INTEN 0xAE
+#define RC5T583_INTC_INTMON 0xAF
+
+#define RC5T583_INT_MON_GRP 0xAF
+#define RC5T583_INT_MON_SYS1 0x1B
+#define RC5T583_INT_MON_SYS2 0x1F
+#define RC5T583_INT_MON_DCDC 0x43
+#define RC5T583_INT_MON_RTC 0xEE
+
+/* Interrupt clearing registers */
+#define RC5T583_INT_IR_SYS1 0x1A
+#define RC5T583_INT_IR_SYS2 0x1E
+#define RC5T583_INT_IR_DCDC 0x42
+#define RC5T583_INT_IR_RTC 0xEE
+#define RC5T583_INT_IR_ADCL 0x94
+#define RC5T583_INT_IR_ADCH 0x95
+#define RC5T583_INT_IR_ADCEND 0x96
+#define RC5T583_INT_IR_GPIOR 0xA9
+#define RC5T583_INT_IR_GPIOF 0xAA
+
+/* Sleep sequence registers */
+#define RC5T583_SLPSEQ1 0x21
+#define RC5T583_SLPSEQ2 0x22
+#define RC5T583_SLPSEQ3 0x23
+#define RC5T583_SLPSEQ4 0x24
+#define RC5T583_SLPSEQ5 0x25
+#define RC5T583_SLPSEQ6 0x26
+#define RC5T583_SLPSEQ7 0x27
+#define RC5T583_SLPSEQ8 0x28
+#define RC5T583_SLPSEQ9 0x29
+#define RC5T583_SLPSEQ10 0x2A
+#define RC5T583_SLPSEQ11 0x2B
+
+/* Regulator registers */
+#define RC5T583_REG_DC0CTL 0x30
+#define RC5T583_REG_DC0DAC 0x31
+#define RC5T583_REG_DC0LATCTL 0x32
+#define RC5T583_REG_SR0CTL 0x33
+
+#define RC5T583_REG_DC1CTL 0x34
+#define RC5T583_REG_DC1DAC 0x35
+#define RC5T583_REG_DC1LATCTL 0x36
+#define RC5T583_REG_SR1CTL 0x37
+
+#define RC5T583_REG_DC2CTL 0x38
+#define RC5T583_REG_DC2DAC 0x39
+#define RC5T583_REG_DC2LATCTL 0x3A
+#define RC5T583_REG_SR2CTL 0x3B
+
+#define RC5T583_REG_DC3CTL 0x3C
+#define RC5T583_REG_DC3DAC 0x3D
+#define RC5T583_REG_DC3LATCTL 0x3E
+#define RC5T583_REG_SR3CTL 0x3F
+
+
+#define RC5T583_REG_LDOEN1 0x50
+#define RC5T583_REG_LDOEN2 0x51
+#define RC5T583_REG_LDODIS1 0x52
+#define RC5T583_REG_LDODIS2 0x53
+
+#define RC5T583_REG_LDO0DAC 0x54
+#define RC5T583_REG_LDO1DAC 0x55
+#define RC5T583_REG_LDO2DAC 0x56
+#define RC5T583_REG_LDO3DAC 0x57
+#define RC5T583_REG_LDO4DAC 0x58
+#define RC5T583_REG_LDO5DAC 0x59
+#define RC5T583_REG_LDO6DAC 0x5A
+#define RC5T583_REG_LDO7DAC 0x5B
+#define RC5T583_REG_LDO8DAC 0x5C
+#define RC5T583_REG_LDO9DAC 0x5D
+
+#define RC5T583_REG_DC0DAC_DS 0x60
+#define RC5T583_REG_DC1DAC_DS 0x61
+#define RC5T583_REG_DC2DAC_DS 0x62
+#define RC5T583_REG_DC3DAC_DS 0x63
+
+#define RC5T583_REG_LDO0DAC_DS 0x64
+#define RC5T583_REG_LDO1DAC_DS 0x65
+#define RC5T583_REG_LDO2DAC_DS 0x66
+#define RC5T583_REG_LDO3DAC_DS 0x67
+#define RC5T583_REG_LDO4DAC_DS 0x68
+#define RC5T583_REG_LDO5DAC_DS 0x69
+#define RC5T583_REG_LDO6DAC_DS 0x6A
+#define RC5T583_REG_LDO7DAC_DS 0x6B
+#define RC5T583_REG_LDO8DAC_DS 0x6C
+#define RC5T583_REG_LDO9DAC_DS 0x6D
+
+/* GPIO register base address */
+#define RC5T583_GPIO_IOSEL 0xA0
+#define RC5T583_GPIO_PDEN 0xA1
+#define RC5T583_GPIO_IOOUT 0xA2
+#define RC5T583_GPIO_PGSEL 0xA3
+#define RC5T583_GPIO_GPINV 0xA4
+#define RC5T583_GPIO_GPDEB 0xA5
+#define RC5T583_GPIO_GPEDGE1 0xA6
+#define RC5T583_GPIO_GPEDGE2 0xA7
+#define RC5T583_GPIO_EN_INT 0xA8
+#define RC5T583_GPIO_MON_IOIN 0xAB
+#define RC5T583_GPIO_GPOFUNC 0xAC
+
+/* RICOH_RC5T583 IRQ definitions */
+enum {
+ RC5T583_IRQ_ONKEY,
+ RC5T583_IRQ_ACOK,
+ RC5T583_IRQ_LIDOPEN,
+ RC5T583_IRQ_PREOT,
+ RC5T583_IRQ_CLKSTP,
+ RC5T583_IRQ_ONKEY_OFF,
+ RC5T583_IRQ_WD,
+ RC5T583_IRQ_EN_PWRREQ1,
+ RC5T583_IRQ_EN_PWRREQ2,
+ RC5T583_IRQ_PRE_VINDET,
+
+ RC5T583_IRQ_DC0LIM,
+ RC5T583_IRQ_DC1LIM,
+ RC5T583_IRQ_DC2LIM,
+ RC5T583_IRQ_DC3LIM,
+
+ RC5T583_IRQ_CTC,
+ RC5T583_IRQ_YALE,
+ RC5T583_IRQ_DALE,
+ RC5T583_IRQ_WALE,
+
+ RC5T583_IRQ_AIN1L,
+ RC5T583_IRQ_AIN2L,
+ RC5T583_IRQ_AIN3L,
+ RC5T583_IRQ_VBATL,
+ RC5T583_IRQ_VIN3L,
+ RC5T583_IRQ_VIN8L,
+ RC5T583_IRQ_AIN1H,
+ RC5T583_IRQ_AIN2H,
+ RC5T583_IRQ_AIN3H,
+ RC5T583_IRQ_VBATH,
+ RC5T583_IRQ_VIN3H,
+ RC5T583_IRQ_VIN8H,
+ RC5T583_IRQ_ADCEND,
+
+ RC5T583_IRQ_GPIO0,
+ RC5T583_IRQ_GPIO1,
+ RC5T583_IRQ_GPIO2,
+ RC5T583_IRQ_GPIO3,
+ RC5T583_IRQ_GPIO4,
+ RC5T583_IRQ_GPIO5,
+ RC5T583_IRQ_GPIO6,
+ RC5T583_IRQ_GPIO7,
+
+ /* Should be last entry */
+ RC5T583_MAX_IRQS,
+};
+
+/* Ricoh583 gpio definitions */
+enum {
+ RC5T583_GPIO0,
+ RC5T583_GPIO1,
+ RC5T583_GPIO2,
+ RC5T583_GPIO3,
+ RC5T583_GPIO4,
+ RC5T583_GPIO5,
+ RC5T583_GPIO6,
+ RC5T583_GPIO7,
+
+ /* Should be last entry */
+ RC5T583_MAX_GPIO,
+};
+
+enum {
+ RC5T583_DS_NONE,
+ RC5T583_DS_DC0,
+ RC5T583_DS_DC1,
+ RC5T583_DS_DC2,
+ RC5T583_DS_DC3,
+ RC5T583_DS_LDO0,
+ RC5T583_DS_LDO1,
+ RC5T583_DS_LDO2,
+ RC5T583_DS_LDO3,
+ RC5T583_DS_LDO4,
+ RC5T583_DS_LDO5,
+ RC5T583_DS_LDO6,
+ RC5T583_DS_LDO7,
+ RC5T583_DS_LDO8,
+ RC5T583_DS_LDO9,
+ RC5T583_DS_PSO0,
+ RC5T583_DS_PSO1,
+ RC5T583_DS_PSO2,
+ RC5T583_DS_PSO3,
+ RC5T583_DS_PSO4,
+ RC5T583_DS_PSO5,
+ RC5T583_DS_PSO6,
+ RC5T583_DS_PSO7,
+
+ /* Should be last entry */
+ RC5T583_DS_MAX,
+};
+
+/*
+ * Ricoh pmic RC5T583 supports sleep through two external controls.
+ * The output of gpios and regulator can be enable/disable through
+ * this external signals.
+ */
+enum {
+ RC5T583_EXT_PWRREQ1_CONTROL = 0x1,
+ RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
+};
+
+struct rc5t583 {
+ struct device *dev;
+ struct regmap *regmap;
+ int chip_irq;
+ int irq_base;
+ struct mutex irq_lock;
+ unsigned long group_irq_en[MAX_MAIN_INTERRUPT];
+
+ /* For main interrupt bits in INTC */
+ uint8_t intc_inten_reg;
+
+ /* For group interrupt bits and address */
+ uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS];
+
+ /* For gpio edge */
+ uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG];
+};
+
+/*
+ * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
+ * The board specific data is provided through this structure.
+ * @irq_base: Irq base number on which this device registers their interrupts.
+ * @enable_shutdown: Enable shutdown through the input pin "shutdown".
+ */
+
+struct rc5t583_platform_data {
+ int irq_base;
+ bool enable_shutdown;
+};
+
+int rc5t583_write(struct device *dev, u8 reg, uint8_t val);
+int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val);
+int rc5t583_set_bits(struct device *dev, unsigned int reg,
+ unsigned int bit_mask);
+int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+ unsigned int bit_mask);
+int rc5t583_update(struct device *dev, unsigned int reg,
+ unsigned int val, unsigned int mask);
+int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
+ int ext_pwr_req, int deepsleep_slot_nr);
+int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
+int rc5t583_irq_exit(struct rc5t583 *rc5t583);
+
+#endif
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff