ARM: dts: sun9i: Add usb phy nodes to a80 dtsi

On sun9i, there are 3 independent usb phys for EHCI/OHCI.
Add device nodes for them.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 0ffecf6..7e7a369 100644 (file)
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -345,6 +345,43 @@
                 */
                ranges = <0 0 0 0x20000000>;
 
+               usbphy1: phy@00a00800 {
+                       compatible = "allwinner,sun9i-a80-usb-phy";
+                       reg = <0x00a00800 0x4>;
+                       clocks = <&usb_phy_clk 1>;
+                       clock-names = "phy";
+                       resets = <&usb_phy_clk 17>;
+                       reset-names = "phy";
+                       status = "disabled";
+                       #phy-cells = <0>;
+               };
+
+               usbphy2: phy@00a01800 {
+                       compatible = "allwinner,sun9i-a80-usb-phy";
+                       reg = <0x00a01800 0x4>;
+                       clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+                                <&usb_phy_clk 3>;
+                       clock-names = "hsic_480M", "hsic_12M", "phy";
+                       resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+                       reset-names = "hsic", "phy";
+                       status = "disabled";
+                       #phy-cells = <0>;
+                       /* usb1 is always used with HSIC */
+                       phy_type = "hsic";
+               };
+
+               usbphy3: phy@00a02800 {
+                       compatible = "allwinner,sun9i-a80-usb-phy";
+                       reg = <0x00a02800 0x4>;
+                       clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
+                                <&usb_phy_clk 5>;
+                       clock-names = "hsic_480M", "hsic_12M", "phy";
+                       resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
+                       reset-names = "hsic", "phy";
+                       status = "disabled";
+                       #phy-cells = <0>;
+               };
+
                mmc0: mmc@01c0f000 {
                        compatible = "allwinner,sun5i-a13-mmc";
                        reg = <0x01c0f000 0x1000>;